BASIC ENGINE
CYLINDER BLOCK GPDAMPER GP
HOUSING GP-FRONT
FLYWHEEL GP
GEAR GP
FLYWHEEL GP
HOUSING GP-FLYWHEEL
GEAR GP
PARTS GP-MISCELLANEOUS
BASIC ENGINE
CYLINDER BLOCK GP#SEBP55950020
0R-9847: CYLINDER PACK GP
Parts for your 578 PIPELAYER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 0R-3780 | [1] | ROD AS-CONNECTING | |
1A. | 6I-2726 | [1] | BUSHING | |
7E-4195 M | [2] | BOLT-CONNECTING ROD (M16X1.5X97-MM) | ||
7N-2043 | [2] | DOWEL | ||
2. | 130-0241 | [1] | SKIRT-PISTON | |
3. | 168-7246 | [1] | PIN-PISTON | |
4. | 7E-1177 | [2] | RETAINER-PIN | |
5. | [1] | CROWN AS-PISTON | ||
5A. | [2] | BUSHING | ||
6. | 134-3761 | [1] | RING-PISTON (TOP) | |
7. | 164-4187 | [1] | RING-PISTON (INTERMEDIATE) | |
8. | 172-3284 | [1] | RING-PISTON (OIL CONTROL) | |
197-9322 F | [1] | LINER-CYLINDER BLOCK | ||
AVAILABLE REPAIR KIT(S): | ||||
160-9874 Y | [1] | KIT-GASKET (SINGLE CYLINDER LINER) | ||
F | NOT SHOWN | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP55950021
4P-5893: DAMPER GP
Parts for your 578 PIPELAYER:
CATERPILLAR SIS#SEBP55950022
4N-6006: FASTENER GP-FRONT HOUSING
4N-6006 FASTENER GP-FRONT HOUSING
S/N 11N1-17536; 70V35205-99999
PART OF 321-6312 ENGINE AR
S/N 11N1-17536; 70V35205-99999
PART OF 321-6312 ENGINE AR
#SEBP55950023
1W-7505: FLYWHEEL GP
Parts for your 578 PIPELAYER:
CATERPILLAR SIS#SEBP55950024
8N-9246: GEAR GP-FRONT
Parts for your 578 PIPELAYER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7E-5661 | [1] | GEAR-OIL PUMP DRIVE (69-TEETH) | |
2. | 1P-7346 | [1] | WASHER-HARD (10.2X35X6-MM THK) | |
3. | 0S-1571 | [1] | BOLT (3/8-16X1.75-IN) | |
4. | 1B-8705 | [1] | KEY-WOODRUFF | |
5. | 3G-2292 | [5] | BOLT-LOCKING (3/8-16X0.87-IN) | |
6. | 6I-0093 | [1] | SHAFT-IDLER | |
7. | 112-9217 | [1] | PLATE-THRUST | |
8. | 126-1756 | [4] | BOLT-LOCKING (5/16-18X0.875-IN) | |
9. | 2W-7455 | [1] | GEAR AS-IDLER (105, 42-TEETH) | |
10. | 131-7123 | [1] | BUSHING | |
11. | 1B-8705 | [1] | KEY-WOODRUFF |
#SEBP55950025
4W-0513: GEAR GP-REAR
Parts for your 578 PIPELAYER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4W-7073 | [1] | ADAPTER AS-PUMP | |
2. | 8M-9315 | [1] | BUSHING | |
3. | 7W-4336 | [1] | GEAR-PUMP DRIVE (64-TEETH) | |
4. | 4F-6024 | [1] | PIN | |
5. | 4N-1230 | [2] | SEAL-O-RING | |
6. | 0S-1594 | [12] | BOLT (3/8-16X1-IN) | |
7. | 1W-4744 | [1] | ADAPTER AS-PUMP | |
8. | 8M-9315 | [1] | BUSHING | |
9. | 1W-4740 | [1] | GEAR AS-DRIVE (64-TEETH) | |
10. | 4F-6024 | [1] | PIN | |
11. | 2W-0494 | [1] | GEAR AS-IDLER (64-TEETH) | |
12. | 1W-4738 | [1] | BUSHING | |
13. | 2W-0493 | [1] | GEAR AS-IDLER (74-TEETH) | |
14. | 1W-4738 | [1] | BUSHING | |
15. | 1W-4746 | [2] | RETAINER-GEAR | |
16. | 1A-1460 | [6] | BOLT (1/2-13X2-IN) | |
17. | 2W-0496 | [1] | GEAR AS-CRANKSHAFT (68-TEETH) | |
18. | 4N-0684 | [1] | DOWEL |
#SEBP55950026
4W-0513: GEAR GP-REAR
Parts for your 578 PIPELAYER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2W-0496 | [1] | GEAR AS-CRANKSHAFT (68-TEETH) | |
4N-0684 | [1] | DOWEL | ||
2. | 2W-0494 | [1] | GEAR AS-IDLER (64-TEETH) | |
1W-4738 | [1] | BUSHING | ||
3. | 2W-0493 | [1] | GEAR AS-IDLER (74-TEETH) | |
1W-4738 | [1] | BUSHING | ||
4. | 1W-4746 | [2] | RETAINER-GEAR | |
5. | 1A-1460 | [6] | BOLT (1/2-13X2-IN) | |
6. | 187-8195 | [1] | GEAR AS-DRIVE (64-TEETH) | |
4F-6024 | [1] | PIN | ||
7. | 4N-1230 | [2] | SEAL-O-RING | |
8. | 0S-1594 | [12] | BOLT (3/8-16X1-IN) | |
9. | 187-8233 | [1] | ADAPTER AS | |
160-8184 | [1] | BUSHING | ||
10. | 187-8220 | [1] | ADAPTER AS-PUMP | |
1W-4743 | [1] | ADAPTER-HYDRAULIC PUMP | ||
11. | 187-8194 | [1] | GEAR AS-DRIVE (64-TEETH) | |
4F-6024 | [1] | PIN |
#SEBP55950027
1W-7506: HOUSING GP-FLYWHEEL
1W-7506 HOUSING GP-FLYWHEEL
S/N 11N1-17536; 70V35205-99999
PART OF 321-6312 ENGINE AR
S/N 11N1-17536; 70V35205-99999
PART OF 321-6312 ENGINE AR
Parts for your 578 PIPELAYER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 188-4471 | [1] | HOUSING AS | |
2. | 8M-9315 | [2] | BUSHING | |
3. | 9S-8005 | [2] | PLUG (3/4-16-THD) | |
4. | 8L-2786 | [3] | SEAL-O-RING | |
5. | 8T-6765 | [2] | PLUG-PIPE (1/4-18-THD) | |
6. | 9S-4191 | [4] | PLUG (9/16-18-THD) | |
7. | 6V-5049 | [5] | SEAL-O-RING | |
8. | 9S-4185 | [1] | PLUG (3/4-16-THD) | |
9. | 1W-3136 | [1] | BAFFLE | |
10. | 9S-4182 | [1] | PLUG (7/16-20-THD) | |
11. | 6V-5048 | [1] | SEAL-O-RING | |
12. | 9S-8004 | [1] | PLUG (9/16-18-THD) | |
13. | 155-5619 | [1] | GASKET | |
14. | 165-3930 | [6] | BOLT (3/8-16X1.625-IN)(3/8-16X1.625IN) | |
15. | 165-3932 | [6] | BOLT (3/8-16X2-IN)(3/8-16X2IN) | |
16. | 5J-5793 | [1] | BOLT-12 POINT HEAD (1/2-13X2-IN) | |
17. | 165-3936 | [1] | BOLT (3/8-16X4.5-IN)(3/8-16X4.5IN) | |
18. | 5P-8245 | [9] | WASHER-HARD (13.5X25.5X3-MM THK) | |
19. | 9K-7290 | [8] | BOLT-12 POINT HEAD (1/2-13X3.25-IN) |
#SEBP55950028
7W-3656: HOUSING GP-FRONT
Parts for your 578 PIPELAYER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 1W-1469 | [1] | HOUSING AS-GEAR | |
2. | 2M-4779 | [5] | STUD-TAPERLOCK (3/8-16X1.75-IN) | |
3. | 5M-6214 | [1] | PLUG (1/8-27 PTF) | |
4. | 6F-7012 B | [1] | STUD-TAPERLOCK (3/8-16X1.57-IN) | |
5. | 6F-7012 | [4] | STUD-TAPERLOCK (3/8-16X1.57-IN) | |
6. | 6H-0406 B | [1] | STUD-TAPERLOCK (3/8-16X1.968-IN) | |
7. | 166-9146 | [1] | GASKET | |
8. | 1W-1471 | [1] | PLATE | |
9. | 166-9142 | [1] | GASKET | |
10. | 1A-2029 | [7] | BOLT (3/8-16X1.125-IN) | |
11. | 5P-4255 | [8] | BOLT-LOCKING (3/8-16X1-IN) | |
12. | 0L-1352 | [2] | BOLT (3/8-16X3.25-IN) | |
13. | 0T-0055 | [2] | BOLT (3/8-16X4.25-IN) | |
14. | 5M-2894 | [22] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
15. | 1N-3181 | [2] | STUD-HOLLOW (3/8-16X1.476-IN) | |
16. | 6B-2250 | [2] | GASKET | |
17. | 147-0182 | [1] | SEAL-O-RING | |
18. | 2A-4639 | [7] | BOLT (3/8-16X1.625-IN) | |
19. | 8S-9191 | [1] | BOLT (3/8-16X4-IN) | |
20. | 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | |
21. | 1B-2886 | [1] | BOLT (1/2-13X3.75-IN) | |
22. | 1F-7958 | [1] | NUT-FULL (1/2-13-THD) | |
23. | 1W-1898 | [1] | GASKET | |
24. | 7W-6992 | [1] | COVER AS | |
25. | 9M-4007 | [1] | DOWEL | |
26. | 5P-8245 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
B | USE AS REQUIRED |
#SEBP55950029
321-3004: KIT-HARDWARE
321-3004 KIT-HARDWARE
S/N 8HB1-UP
PART OF 321-3002 CONVERSION AR-ENGINE
FOR USE WITH REHS3336, 3406 EMISSIONS UPGRADE GROUP RETROFIT TO TIER I EQUIVALENT LEVEL , FOR 578 PIPELAYER TRACTOR, (8HB)T353- 70V34912-11N16930, 2W-2652 ENGINE ARRANGEMENT
S/N 8HB1-UP
PART OF 321-3002 CONVERSION AR-ENGINE
FOR USE WITH REHS3336, 3406 EMISSIONS UPGRADE GROUP RETROFIT TO TIER I EQUIVALENT LEVEL , FOR 578 PIPELAYER TRACTOR, (8HB)T353- 70V34912-11N16930, 2W-2652 ENGINE ARRANGEMENT
Parts for your 578 PIPELAYER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
0L-1351 | [8] | BOLT (3/8-16X0.875-IN) | ||
0S-1590 | [2] | BOLT (3/8-16X2-IN) | ||
0S-1591 | [4] | BOLT (3/8-16X1.5-IN) | ||
0S-1594 | [2] | BOLT (3/8-16X1-IN) | ||
0T-0065 | [8] | BOLT (3/8-16X3.5-IN) | ||
1A-2029 | [7] | BOLT (3/8-16X1.125-IN) | ||
1B-9575 | [12] | BOLT (5/16-18X1.56-IN) | ||
1C-2251 | [2] | BOLT (3/8-16X1.87-IN) | ||
2A-4639 | [2] | BOLT (3/8-16X1.625-IN) | ||
3B-1915 | [1] | BOLT (3/8-16X1.375-IN) | ||
2N-2765 | [6] | BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN) | ||
031-0219 | [11] | BOLT-LOCKING (3/8-16X1.75-IN) | ||
150-1156 | [6] | BOLT-SPECIAL (OIL JET) | ||
1S-4295 | [1] | GASKET (TURBOCHARGER) | ||
2N-8204 | [6] | GASKET | ||
4N-0699 | [1] | GASKET | ||
4N-0933 | [1] | GASKET | ||
6L-9589 | [4] | GASKET | ||
7W-0688 | [2] | GASKET | ||
2N-2766 | [6] | LOCKNUT (3/8-16-THD) | ||
9S-8752 | [9] | NUT-FULL (3/8-16-THD) | ||
7W-6492 | [1] | PLUG-PIPE (1/2-14-THD) | ||
8T-6762 | [1] | PLUG-PIPE (1/2-14-THD) | ||
8T-6764 | [2] | PLUG-PIPE (1/8-27-THD) | ||
8T-6765 | [2] | PLUG-PIPE (1/4-18-THD) | ||
8T-6767 | [1] | PLUG-PIPE (3/8-18-THD) | ||
5L-8854 | [2] | RING-SEALING | ||
3J-7354 | [1] | SEAL-O-RING | ||
5P-7204 | [2] | SEAL-O-RING | ||
109-0072 | [2] | SEAL-O-RING | ||
109-0078 | [6] | SEAL-O-RING | ||
6F-7062 | [1] | WASHER (12.7X19.05X1.83-MM THK) | ||
5M-2894 | [29] | WASHER-HARD (10.2X18.5X2.5-MM THK) | ||
9M-1974 | [26] | WASHER-HARD (8.8X16X2-MM THK) | ||
9X-6458 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) |
Information:
BASIC ENGINE
CYLINDER BLOCK GP
Truck Engine News
Special Instruction
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation of the 3406B and 3406C Long Block Engines
Installation of the 3406B and 3406C Long Block Engines
Installation of the 3406B and 3406C Long Block Engines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine