AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

202-1257 CYLINDER BLOCK AS PART OF 463-3536 CYLINDER BLOCK AS 980C WHEEL LOADER


BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP

WHEEL LOADER 980C WHEEL LOADER 63X
 3406 Engine Emissions Upgrade Group Retrofit Tier I Equivalent Level for 980C, 980F, & 980F Series II Wheel Loader 63X00001-UP (MACHINE) SEBP5597 980C 63X   (1978)

BASIC ENGINE

CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
4N-5114 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK AS
202-1257 CYLINDER BLOCK AS
CYLINDER BLOCK AS
463-3536 CYLINDER BLOCK AS
CYLINDER BLOCK GP
152-7646 CYLINDER BLOCK GP
CYLINDER BLOCK GP
163-0925 CYLINDER BLOCK GP
CYLINDER BLOCK GP
163-0925 CYLINDER BLOCK GP
CYLINDER BLOCK GP
202-1258 CYLINDER BLOCK GP
CYLINDER PACK GP
0R-9847 CYLINDER PACK GP
 

#SEBP55970020
 

202-1257: CYLINDER BLOCK AS

202-1257 CYLINDER BLOCK AS
PART OF 463-3536 CYLINDER BLOCK AS
i01570723 SEBP5597
2021257 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-8081 [7] CAP-CRANKSHAFT BEARING  
2. 167-8083 [14] BOLT (7/8-14X7.5-IN)  
3. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
 

#SEBP55970021
 

463-3536: CYLINDER BLOCK AS

463-3536 CYLINDER BLOCK AS
PART OF 202-1258 CYLINDER BLOCK GP
i06280842 SEBP5597
4633536 CYLINDER BLOCK AS Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-0685 [6] BUSHING (1-IN WIDE)  
2. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
3. 202-1257 Y [1] CYLINDER BLOCK AS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP55970022
 

152-7646: CYLINDER BLOCK GP

152-7646 CYLINDER BLOCK GP
PART OF 163-0925 CYLINDER BLOCK GP
i00734532 SEBP5597
1527646 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 197-9322 [6] LINER-CYLINDER BLOCK  
2. 9L-5854 [6] BAND-FILLER (130.2-MM ID)  
3. 110-2220 [6] SEAL-LINER  
4. 3P-1323 [14] BOLT-BEARING CAP (7/8-14X7.75-IN)  
5. 9H-1031 [14] WASHER-HARD (24X41.5X6-MM THK)  
6. 4N-5857 [7] CAP-CRANKSHAFT BEARING (MAIN BEARING)  
7. 142-7072 [6] SEAL-LINER  
8. 142-6217 [6] SEAL-O-RING  
10. 4N-0685 [6] BUSHING (1-IN WIDE)  
11. 4N-6658 [1] BUSHING (1.3-IN WIDE)  
 

#SEBP55970023
 

163-0925: CYLINDER BLOCK GP

163-0925 CYLINDER BLOCK GP
Type 1
i01056417 SEBP5597
1630925 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6757 [3] PLUG-PIPE  
2. 7W-6534 [1] PLUG-PIPE  
3. 152-7646 Y [1] CYLINDER BLOCK GP  
4. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
5. 1S-9540 [2] DOWEL  
6. 3S-5496 [2] SEAL-O-RING  
7. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
8. 119-5155 [1] SEAL-O-RING  
9. 030-7571 [4] BOLT (3/8-16X1-IN)  
10. 4W-8585 [1] COVER  
11. 7W-6081 [1] GASKET  
12. 4N-0683 [4] DOWEL  
13. 4N-1650 [2] DOWEL  
14. 6I-2981 [1] PLATE-BLOCK  
15. 6I-4024 [1] GASKET-PLATE  
16. 8S-9094 [1] PLUG-ORIFICE  
17. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
18. 114-4427 [2] SEAL-O-RING  
19. 7X-7732 [6] PLUG-PIPE  
22. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
23. 9S-8009 [1] PLUG-O-RING  
24. 100-7399 [2] PLUG  
25. 3E-6747 [2] SEAL-O-RING  
26. 9S-4182 [1] PLUG (7/16-20-THD)  
27. 9X-7378 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP55970024
 

163-0925: CYLINDER BLOCK GP

163-0925 CYLINDER BLOCK GP
Type 2
i01637976 SEBP5597
1630925 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-6757 [3] PLUG-PIPE  
2. 7W-6534 [1] PLUG-PIPE  
3. 202-1258 CY [1] CYLINDER BLOCK GP  
4. 8T-6763 [3] PLUG-PIPE (1/4-18-THD)  
5. 1S-9540 [2] DOWEL  
6. 3S-5496 [2] SEAL-O-RING  
7. 7W-6492 [1] PLUG-PIPE (1/2-14-THD)  
8. 119-5155 [1] SEAL-O-RING  
9. 030-7571 [4] BOLT (3/8-16X1-IN)  
10. 4W-8585 [1] COVER  
11. 7W-6081 [1] GASKET  
12. 4N-0683 [4] DOWEL  
13. 4N-1650 [2] DOWEL  
14. 6I-2981 [1] PLATE-BLOCK  
15. 6I-4024 [1] GASKET-PLATE  
16. 8S-9094 [1] PLUG-ORIFICE  
17. 9S-4190 [2] PLUG-O-RING (7/8-14-THD)  
18. 114-4427 [2] SEAL-O-RING  
19. 7X-7732 [6] PLUG-PIPE  
22. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
23. 9S-8009 [1] PLUG-O-RING  
24. 100-7399 [2] PLUG  
25. 250-0466 [2] SEAL-O-RING  
26. 9S-4182 [1] PLUG (7/16-20-THD)  
27. 9X-7378 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP55970025
 

202-1258: CYLINDER BLOCK GP

202-1258 CYLINDER BLOCK GP
PART OF 163-0925 CYLINDER BLOCK GP
i01538305 SEBP5597
2021258 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-5854 [6] BAND-FILLER (130.2-MM ID)  
2. 197-9322 [6] LINER-CYLINDER BLOCK  
3. 463-3536 Y [1] CYLINDER BLOCK AS  
4. 110-2220 [6] SEAL-LINER  
5. 142-6217 [6] SEAL-O-RING  
6. 142-7072 [6] SEAL-LINER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP55970026
 

7W-0007: CYLINDER HEAD AS

7W-0007 CYLINDER HEAD AS
PART OF 7W-0009 CYLINDER HEAD AS, 7W-2203 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@ 7W-0009@@@@@
i00147303 SEBP5597
7W0007 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0645 [12] PLUG-CUP  
2. 4N-5893 [12] INSERT-VALVE SEAT (INLET)(STANDARD)  
  7C-7602 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  7C-7603 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  7C-7604 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  7C-7605 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
3. 1W-5283 [12] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  7C-5353 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  7C-5354 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
4. 2M-6471 [1] PLUG-CUP  
5. 3B-0623 [10] PLUG-CUP  
6. 8T-6762 [1] PLUG-PIPE (1/2-14-THD)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP55970027
 

7W-0009: CYLINDER HEAD AS

7W-0009 CYLINDER HEAD AS
FIELD REPLACEMENT FOR @@@@@ 7W-0007@@@@@
i00147304 SEBP5597
7W0009 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-0007 Y [1] CYLINDER HEAD AS  
2. 4N-2803 [24] GUIDE-VALVE  
3. 2N-5775 [12] DOWEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP55970028
 

9Y-3775: CYLINDER HEAD AS

9Y-3775 CYLINDER HEAD AS
PART OF 7W-2203 CYLINDER HEAD GP
i00158354 SEBP5597
9Y3775 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-0645 [12] PLUG-CUP  
2. 4N-5893 [12] INSERT-VALVE SEAT (INLET)(STANDARD)  
  7C-7602 AB INSERT-VALVE SEAT (0.13-MM OS, INLET)  
  7C-7603 AB INSERT-VALVE SEAT (0.25-MM OS, INLET)  
  7C-7604 AB INSERT-VALVE SEAT (0.51-MM OS, INLET)  
  7C-7605 AB INSERT-VALVE SEAT (0.76-MM OS, INLET)  
3. 1W-5283 [12] INSERT-VALVE SEAT (EXHAUST)(STANDARD)  
  7C-5353 AB INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)  
  7C-5354 AB INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)  
4. 2M-6471 [1] PLUG-CUP  
5. 3B-0623 [10] PLUG-CUP  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP55970029
 

110-5096: CYLINDER HEAD GP

110-5096 CYLINDER HEAD GP
FIELD REPLACEMENT FOR @@@@@110-5099@@@@@
i00123133 SEBP5597
1105096 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your 980C WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-5099 Y [1] CYLINDER HEAD GP  
2. 122-7374 [24] GUIDE-VALVE (STANDARD)  
  121-9859 AB GUIDE-VALVE (0.13-MM OS)  
  121-9860 AB GUIDE-VALVE (0.51-MM OS)  
3. 2N-5775 [12] DOWEL  
4. 194-8124 B [6] SLEEVE AS (EXHAUST PORT)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
The Cylinder Liners Have a New Appearance {1216}
2005/03/01
Engine News
A New Liner O-Ring Seal is Available for Certain C10 Through C13 Engines {1201, 7555}
2013/12/23
Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
INSTALLATION OF 7N628 GASKET SERVICE GROUP{1101, 1221}
INSTALLATION OF 7N628 GASKET SERVICE GROUP{1101, 1221}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Installation Of 2W3815 Or 5N93 Inserts{1217}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation of the 3406B and 3406C Long Block Engines
Installation of the 3406B and 3406C Long Block Engines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Service Letter-NACD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Australia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CFEL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-CSARL
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Americas
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Brazil
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Truck/Ag/Marine
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Technical Information Bulletin
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
0R-3711, 0R-3714, 0R-3751, 0R-3752 Remanufactured Long Blocks
Specifications
Cylinder Block
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Idler Gear Shaft Pilot Bore
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Cylinder Liners
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Cylinder Liner Projection
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Bearings For Connecting Rods And Mains
3406 ENGINE FOR CATERPILLAR BUILT MACHINES
Tool Operating Manual
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Letter-China
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Service Letter-Asia
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Remove All 7N9331, 7N9335, And 8N1911 Gaskets From Parts Stock
Disassembly and Assembly
Spacer Plate
3406 VEHICULAR ENGINE FOR 980C WHEEL LOADER
Piston Cooling Tubes
3406 VEHICULAR ENGINE FOR 980C WHEEL LOADER
Crankshaft Main Bearings
3406 VEHICULAR ENGINE FOR 980C WHEEL LOADER
Cylinder Liners
3406 VEHICULAR ENGINE FOR 980C WHEEL LOADER
Camshaft Bearings
3406 VEHICULAR ENGINE FOR 980C WHEEL LOADER
Bearing Clearance - Check
C11 and C13 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
Cylinder Liner - Remove
C11 and C13 Engines for Caterpillar Built Machines
Cylinder Liner - Install
C11 and C13 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C11 and C13 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C11 and C13 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C11 and C13 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C11 and C13 Engines for Caterpillar Built Machines
Service Magazine
Remanufactured Short Blocks Are Available For Repairs Of Early 3406 Engines{1201,1101,1102}
1980/03/31
New Connecting Rod And Main Bearings Have A Thicker Coating (Layer) Of Lead-Tin Overlay{1230,1219,1203}
1981/01/19
Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods{1214,1218,1201,1225,1307}
1981/07/13
One-Piece Panel Used For Oil Pan Sound Suppression{7260,1801,1302}
1981/09/07
New Cylinder Liners And O-Ring Seals Give Longer Seal Life{1216,1201,1213,1227}
1981/12/14
Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21
Use Correct Part Numbers For Main And Connecting Rod Bearings{1230,1203,1219}
1982/04/12
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
New Crankshaft Main Bearings Used{1203}
1982/05/10
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Wider Crankshaft Gear Used{1202,1204,1206}
1982/10/11
6V4869 Adapter And 6V6174 Plug Can Be Used To Install Camshaft Bearings{1211,0621}
1982/11/22
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1982/12/20
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
New Liner Seat Insert Available{1217}
1983/08/15
New Connecting Rod And Main Bearings Used{1203,1219,1226,1227,1230}
1983/10/10
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Dimensions For Reconditioning Cylinder Blocks, Cylinder Heads{1201,1101,1103,1105}
1984/04/23
Salvaging Cylinder Block Top Decks After Liner Seat Erosion{1201,1216,1217}
1984/06/04
New Cylinder Block Groups Used{1201}
1984/10/01
Install Crankshaft Thrust Bearings Correctly To Avoid Damage{1202,1203}
1985/02/11
Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15
New Cylinder Liner Available{1201}
1986/02/10
Service Reminders For 3400 Family Of Diesel Engines{1204,1214,1331}
1986/05/05
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Modification To Holder To Machine Counterbore On Cylinder Block{0664,1201}
1977/02/28
Main And Connecting Rod Bearing Part Numbers {1203,1219,1230}
1987/01/26
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Recommendations For Preventing Cooling System Damage {1201}
1987/08/31
Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14
5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
New One-Piece Flywheel Housing Gasket{1157,1201}
1978/07/03
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Liner Seat Insert Available{1201,1216,1217}
1988/11/14
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
New Design Thrust Plate Used In Crankshaft Group{1201,1202,1203}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21
Improved Head Gasket Used; Service Tips {1124,1216,1221,7568}
1990/02/26
Service Tips For Piston Cooling Jets (Tubes){1331}
1990/11/26
Remanufactured Camshafts And Cam Kits Available For Parts Service{1210,1211,1212}
1990/12/17
New Bronze Thrust Plate Used On Center Main Bearing Of Crankshaft Groups{1203}
1990/12/17
Checking Crankshaft Journal Surface Hardness On Remanufactured Crankshafts{1202}
1991/01/07
Procedure To Retain Oil Pump When Pump Mounting Pad On Cylinder Block Is Broken{1201,1304}
1991/05/20
No Gaskets Used With Aluminum Flywheel Housings{1157}
1991/10/14
Thinner Spacer Plates Available For Parts Service{1221}
1992/06/29
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
New Liner Seat Inserts Available{1217}
1992/11/09
Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18
Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16
Additional Parts Required For Remanufactured Short Block{1200}
1993/09/27
New Cylinder Head Gasket, Spacer Plate And Head Bolts Used; New Cylinder Liner Projection Measurement Method; New Cylinder Head Torque Sequence; Improved Coolant Flow (Cylinder Heads) {1124,1221,1216,1101}
1994/07/04
Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/11/28
New Service Repair Camshaft Idler Gear Shaft Available For Use With Cylinder Blocks With Damaged Pilot Bore{1206,1212,1237}
1995/08/21
New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/19
Procedure For Installing Steel Core Gasket At The Front Housing And The Flywheel Housing {1151,1157,1162}
1996/11/25
Damaged Lifter Bores In 3400 Series Engines Can Be Used Again {1201}
2005/01/24
The Cylinder Liners Have a New Appearance {1216}
2005/03/14
Cylinder Pack Upgrade Is Available for Certain 3406B and 3406C Machine Engines When Replacing All Six Cylinders Packs {1201, 1225}
2006/03/20
A New Piston Cooling Jet Assembly Has Been Released {1331}
2006/05/01

Caterpillar Parts SIS Catalog 980C :

CRANKSHAFT GP
6I-1001 CRANKSHAFT GP
CRANKSHAFT AS
430-2593 CRANKSHAFT AS
COVER GP-VALVE MECHANISM
7N-4467 COVER GP-VALVE MECHANISM
COVER GP-FRONT HOUSING
1W-3069 COVER GP-FRONT HOUSING
COVER GP-CYLINDER BLOCK
4N-5114 COVER GP-CYLINDER BLOCK
CAMSHAFT GP
7W-3798 CAMSHAFT GP
AIR COMPRESSOR GP
9Y-1775 AIR COMPRESSOR GP
AIR COMPRESSOR GP
9Y-1775 AIR COMPRESSOR GP
CYLINDER BLOCK AS
463-3536 CYLINDER BLOCK AS
CYLINDER BLOCK GP
152-7646 CYLINDER BLOCK GP
CYLINDER BLOCK GP
163-0925 CYLINDER BLOCK GP
CYLINDER BLOCK GP
163-0925 CYLINDER BLOCK GP
CYLINDER BLOCK GP
202-1258 CYLINDER BLOCK GP
CYLINDER HEAD AS
7W-0007 CYLINDER HEAD AS
CYLINDER HEAD AS
7W-0009 CYLINDER HEAD AS
CYLINDER HEAD AS
9Y-3775 CYLINDER HEAD AS

Truck sale:

Caterpillar 980C
 
Caterpillar 980C
- Wheel Loaders
MICHIGAN CAT
 
29,900 
Caterpillar 980C, Wheel Loaders, Construction


 
40,336 
Caterpillar 980C, Wheel Loaders, Construction


Caterpillar 980C
 
Caterpillar 980C
- Wheel Loaders
MILTON CAT
Caterpillar 980C, Radlader, Bau-Und Bergbauausrüstung
18.500 
Caterpillar 980C, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
WYOMING MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.