BASIC ENGINE
CYLINDER HEAD GPCYLINDER BLOCK GP
DAMPER GP
DRIVE GP-ACCESSORY
BASIC ENGINE
CYLINDER HEAD GP#SEBP55970030
110-5099: CYLINDER HEAD GP
110-5099 CYLINDER HEAD GP
PART OF 110-5096, 7W-2203 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@110-5096@@@@@
PART OF 110-5096, 7W-2203 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@110-5096@@@@@
Parts for your 980C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 3B-0645 | [12] | PLUG-CUP | |
2. | 4N-5893 | [12] | INSERT-VALVE SEAT (INLET)(STANDARD) | |
7C-7602 AB | INSERT-VALVE SEAT (0.13-MM OS, INLET) | |||
7C-7603 AB | INSERT-VALVE SEAT (0.25-MM OS, INLET) | |||
7C-7604 AB | INSERT-VALVE SEAT (0.51-MM OS, INLET) | |||
7C-7605 AB | INSERT-VALVE SEAT (0.76-MM OS, INLET) | |||
3. | 1W-5283 | [12] | INSERT-VALVE SEAT (EXHAUST)(STANDARD) | |
7C-5353 AB | INSERT-VALVE SEAT (0.51-MM OS, EXHAUST) | |||
7C-5354 AB | INSERT-VALVE SEAT (0.76-MM OS, EXHAUST) | |||
4. | 2M-6471 | [1] | PLUG-CUP | |
5. | 3B-0623 | [10] | PLUG-CUP | |
A | NOT PART OF THIS GROUP | |||
B | USE AS REQUIRED |
#SEBP55970031
4W-2436: CYLINDER HEAD GP
4W-2436 CYLINDER HEAD GP
Type 1
Type 1
Parts for your 980C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7W-2203 Y | [1] | CYLINDER HEAD GP | |
2. | 6L-8562 C | [1] | STUD-TAPERLOCK (3/8-16X1.77-IN) | |
3. | 7W-5435 C | [6] | ADAPTER-NOZZLE | |
4. | 5H-7153 | [6] | SEAL-O-RING | |
5. | 4N-7253 | [6] | GASKET-CHAMBER | |
6. | 5F-4899 | [12] | BOLT (3/8-16X5.5-IN) | |
7. | 6L-7442 | [6] | STUD-TAPERLOCK (5/16-18X1.08-IN) | |
8. | 4W-1055 | [24] | SEAL | |
9. | 2H-3750 | [20] | BOLT (3/4-16X7.5-IN) | |
10. | 7E-6000 | [1] | GASKET-CYLINDER HEAD | |
11. | 3J-5390 C | [1] | PLUG (3/8-18-THD) | |
12. | 5H-1504 | [20] | WASHER-HARD (20X33.5X5-MM THK) | |
13. | 3J-5389 | [3] | PLUG (EXTERNAL) | |
14. | 3J-5389 B | [1] | PLUG (EXTERNAL)(USE WITHOUT AIR COMPRESSOR) | |
15. | 4S-6137 | [11] | STUD-TAPERLOCK (3/8-16X3.1-IN) | |
16. | 3S-5496 | [2] | SEAL-O-RING | |
B | USE AS REQUIRED | |||
C | CHANGE FROM PREVIOUS TYPE | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP55970032
4W-2436: CYLINDER HEAD GP
4W-2436 CYLINDER HEAD GP
Type 2
Type 2
Parts for your 980C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7W-2203 Y | [1] | CYLINDER HEAD GP | |
2. | 3S-5496 | [2] | SEAL-O-RING | |
3. | 7W-5435 | [6] | ADAPTER-NOZZLE | |
4. | 5H-7153 | [6] | SEAL-O-RING | |
5. | 4N-7253 | [6] | GASKET-CHAMBER | |
6. | 5F-4899 | [12] | BOLT (3/8-16X5.5-IN) | |
7. | 6L-7442 | [6] | STUD-TAPERLOCK (5/16-18X1.08-IN) | |
8. | 4W-1055 | [24] | SEAL | |
9. | 9X-8904 | [20] | BOLT | |
10. | 6I-3066 | [1] | GASKET-CYLINDER HEAD | |
11. | 8T-6767 | [1] | PLUG-PIPE (3/8-18-THD) | |
12. | 5H-1504 | [20] | WASHER-HARD (20X33.5X5-MM THK) | |
13. | 7W-6492 | [3] | PLUG-PIPE (1/2-14-THD) | |
14. | 7W-6492 B | [1] | PLUG-PIPE (1/2-14-THD) | |
(USE WITHOUT AIR COMPRESSOR) | ||||
15. | 4S-6137 | [12] | STUD-TAPERLOCK (3/8-16X3.1-IN) | |
B | USE AS REQUIRED | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP55970033
4W-2436: CYLINDER HEAD GP
4W-2436 CYLINDER HEAD GP
Type 3
Type 3
Parts for your 980C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7W-2203 Y | [1] | CYLINDER HEAD GP | |
2. | 3S-5496 | [2] | SEAL-O-RING | |
3. | 100-6920 C | [6] | ADAPTER-NOZZLE | |
4. | 7L-4774 C | [6] | SEAL-O-RING | |
5. | 4N-7253 | [6] | GASKET-CHAMBER | |
6. | 5F-4899 | [12] | BOLT (3/8-16X5.5-IN) | |
7. | 6L-7442 | [6] | STUD-TAPERLOCK (5/16-18X1.08-IN) | |
8. | 3E-6772 | [24] | SEAL (WATER) | |
9. | 124-1855 C | [20] | BOLT-12 POINT HEAD (3/4-16X7.638-IN) | |
10. | 6I-3066 | [1] | GASKET-CYLINDER HEAD | |
11. | 8T-6767 | [1] | PLUG-PIPE (3/8-18-THD) | |
12. | 5H-1504 C | [20] | WASHER-HARD (20X33.5X5-MM THK) | |
13. | 7W-6492 | [3] | PLUG-PIPE (1/2-14-THD) | |
14. | 7W-6492 B | [1] | PLUG-PIPE (1/2-14-THD) | |
(USE WITHOUT AIR COMPRESSOR) | ||||
15. | 4S-6137 | [1] | STUD-TAPERLOCK (3/8-16X3.1-IN) | |
16. | 106-1792 | [11] | STUD-TAPERLOCK (3/8-16X4-IN) | |
B | USE AS REQUIRED | |||
C | CHANGE FROM PREVIOUS TYPE | |||
R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP55970034
7W-2203: CYLINDER HEAD GP
Parts for your 980C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7W-0007 CY | [1] | CYLINDER HEAD AS | |
2. | 2W-2622 | [12] | VALVE-INLET | |
3. | 2N-5775 | [12] | DOWEL | |
4. | 2A-4429 | [48] | LOCK-RETAINER | |
5. | 4W-2474 | [24] | ROTOCOIL AS | |
6. | 4W-2471 | [24] | SPRING-VALVE | |
7. | 1W-3860 | [12] | VALVE-EXHAUST | |
8. | 173-7188 | [24] | GUIDE-VALVE | |
9. | 4W-2472 | [24] | SPRING-VALVE | |
10. | 4W-2473 | [24] | WASHER-VALVE SPRING GUIDE | |
C | CHANGE FROM PREVIOUS TYPE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP55970035
7W-2203: CYLINDER HEAD GP
Parts for your 980C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 9Y-3775 CY | [1] | CYLINDER HEAD AS | |
2. | 108-5902 | [12] | VALVE-INLET | |
3. | 2N-5775 | [12] | DOWEL | |
4. | 2A-4429 | [48] | LOCK-RETAINER | |
5. | 4W-2474 | [24] | ROTOCOIL AS | |
6. | 4W-2471 | [24] | SPRING-VALVE | |
7. | 106-1111 | [12] | VALVE-EXHAUST | |
8. | 173-7188 | [24] | GUIDE-VALVE | |
9. | 4W-2472 | [24] | SPRING-VALVE | |
10. | 4W-2473 | [24] | WASHER-VALVE SPRING GUIDE | |
C | CHANGE FROM PREVIOUS TYPE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP55970036
7W-2203: CYLINDER HEAD GP
Parts for your 980C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 110-5099 CY | [1] | CYLINDER HEAD GP | |
2. | 115-2368 | [12] | VALVE-INLET | |
3. | 2N-5775 | [12] | DOWEL | |
4. | 2A-4429 | [48] | LOCK-RETAINER | |
5. | 4W-2474 | [24] | ROTOCOIL AS | |
6. | 4W-2471 | [24] | SPRING-VALVE (OUTER) | |
7. | 115-2367 | [12] | VALVE-EXHAUST | |
8. | 122-7374 | [24] | GUIDE-VALVE (STANDARD) | |
121-9859 AB | GUIDE-VALVE (0.13-MM OS) | |||
121-9860 AB | GUIDE-VALVE (0.51-MM OS) | |||
9. | 4W-2472 | [24] | SPRING-VALVE (INNER) | |
10. | 4W-2473 | [24] | WASHER-VALVE SPRING GUIDE | |
A | NOT PART OF THIS GROUP | |||
B | USE AS REQUIRED | |||
C | CHANGE FROM PREVIOUS TYPE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP55970037
0R-9847: CYLINDER PACK GP
Parts for your 980C WHEEL LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 0R-3780 | [1] | ROD AS-CONNECTING | |
1A. | 6I-2726 | [1] | BUSHING | |
7E-4195 M | [2] | BOLT-CONNECTING ROD (M16X1.5X97-MM) | ||
7N-2043 | [2] | DOWEL | ||
2. | 130-0241 | [1] | SKIRT-PISTON | |
3. | 168-7246 | [1] | PIN-PISTON | |
4. | 7E-1177 | [2] | RETAINER-PIN | |
5. | [1] | CROWN AS-PISTON | ||
5A. | [2] | BUSHING | ||
6. | 134-3761 | [1] | RING-PISTON (TOP) | |
7. | 164-4187 | [1] | RING-PISTON (INTERMEDIATE) | |
8. | 172-3284 | [1] | RING-PISTON (OIL CONTROL) | |
197-9322 F | [1] | LINER-CYLINDER BLOCK | ||
AVAILABLE REPAIR KIT(S): | ||||
160-9874 Y | [1] | KIT-GASKET (SINGLE CYLINDER LINER) | ||
F | NOT SHOWN | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP55970038
4P-5893: DAMPER GP
4P-5893 DAMPER GP
Parts for your 980C WHEEL LOADER:
CATERPILLAR SIS#SEBP55970039
4W-3123: DRIVE GP-ACCESSORY
4W-3123 DRIVE GP-ACCESSORY
AIR COMPRESSOR
AIR COMPRESSOR
Parts for your 980C WHEEL LOADER:
CATERPILLAR SISInformation:
BASIC ENGINE
CYLINDER HEAD GP
Special Instruction
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
Installation of 0R1160, 0R1161 and 0R1248 Remanufactured Cylinder Head Groups{1100}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
3400 Cylinder Head To Block Joint Repair Procedure{1124}
INSTALLATION OF 7N628 GASKET SERVICE GROUP{1101, 1221}
INSTALLATION OF 7N628 GASKET SERVICE GROUP{1101, 1221}
INSTALLATION OF 7N628 GASKET SERVICE GROUP{1101, 1221}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 5P7333 Tool Group For Bridge Dowel Repair{1101}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E, 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834B Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E, 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834B Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E, 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834B Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Service Letter-Australia
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
185-5321 Cylinder Head Lifting Hook Assembly{0599, 0632, 0703, 1101, 6459}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Service Letter-China
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Service Letter-APD
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Product Support Program For Replacing Failed Cylinder Head Gaskets On Certain D8L, D8N, D9N, And D10N Tractors; 16G Motor Graders; D35HP, D40D, D400, And D400D Articulated Dump Trucks; 245, And 245B Excavators; 589 Pipelayers; 621E 623E, 627E, 631E, 637E, 651E, And 657E Wheel Tractors; 657E Scrapers; 768C And 772B Tractors; 769C And 773B Trucks; 824C And 834C Wheel Tractors; 825C Compactors; 826C Landfill Compactors; And 980C, 988B, And 992C Wheel Loaders
Disassembly and Assembly
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Springs - Remove and Install
C11 and C13 Engines for Caterpillar Built Machines
C11 and C13 Engines for Caterpillar Built Machines
Service Magazine
Remanufactured Short Blocks Are Available For Repairs Of Early 3406 Engines{1201,1101,1102}
1980/03/31
1980/03/31
Indications Of Engine Overspeeding When Only One Cam Lobe/Lifter Has Failed{1000,1100,1200}
1986/09/08
1986/09/08
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
1977/08/22
Camshaft Lobe Surface Finish Improved; Camshaft Drive Gear Installation Procedure {1209,1210,1212}
1993/09/13
1993/09/13