AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

111-9363 PUMP GP-FUEL INJECTION PART OF 309-4526 CONVERSION AR-ENGINE, 130-3048 PUMP GP-GOV & FUEL INJ 627B


FUEL SYSTEM
PUMP GP-FUEL INJECTION
PUMP GP-FUEL TRANSFER
GOVERNOR GP
TORQUE CONTROL GP
ELECTRICAL AND STARTING SYSTEM
SHUTOFF GP
BASIC ENGINE
PARTS GP-MISCELLANEOUS
SERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITS

WHEEL TRACTOR 627B WHEEL TRACTOR 14S
 3406 Engine Emissions Upgrade Group Retrofit Tier I Equivalent Level for 621,621B,623B,627B Tractor & 621B Scraper 14S00001-UP (MACHINE) SEBP5598 627B 14S   (1974)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
DRIVE GP-GOVERNOR & FUEL PUMP
119-8434 DRIVE GP-GOVERNOR & FUEL PUMP
FASTENER GP-FUEL INJ PUMP
9Y-4913 FASTENER GP-FUEL INJ PUMP
PROTECTION GP-FUEL SYSTEM
128-7985 PROTECTION GP-FUEL SYSTEM
PUMP GP-FUEL INJECTION
108-6633 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
111-9363 PUMP GP-FUEL INJECTION
PUMP GP-GOV & FUEL INJ
130-3048 PUMP GP-GOV & FUEL INJ
 

#SEBP55980080
 

111-9363: PUMP GP-FUEL INJECTION

111-9363 PUMP GP-FUEL INJECTION
PART OF 309-4526 CONVERSION AR-ENGINE, 130-3048 PUMP GP-GOV & FUEL INJ
i00123189 SEBP5598
1119363 PUMP GP-FUEL INJECTION Parts scheme
  For full view, you need register

Parts for your 627B WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-5887 [1] HOUSING GP-FUEL PUMP  
2. 4F-2099 [1] DOWEL  
3. 1S-1953 [1] BEARING-RACK  
4. 7E-6002 [1] BUSHING (REAR)  
5. 7E-6003 [1] BUSHING (CENTER)  
6. 7E-6004 [1] BUSHING (FRONT)  
7. 4P-7045 [6] DOWEL  
8. 1W-3285 [1] BEARING-RACK  
9. 4P-8480 [6] PIN-PUMP GUIDE  
10. 1W-5785 [1] COVER  
11. 8N-9367 [1] RACK-REGULATOR  
12. 9S-8001 [1] PLUG  
13. 109-9685 [1] SEAL-O-RING  
14. 8E-5237 [2] RACE-THRUST BEARING  
15. 7L-3326 [1] BEARING-THRUST  
16. 9N-1545 [2] RACE-THRUST BEARING  
17. 3S-8022 [1] BEARING-THRUST  
18. 4P-2948 [1] RING-GUIDE  
19. 111-9371 [1] CAMSHAFT-FUEL PUMP  
20. 8N-9371 [1] COVER  
21. 4F-7957 [4] BOLT (1/4-20X0.875-IN)  
22. 8J-4351 [2] SEAL-O-RING  
23. 113-7794 [6] BUSHING  
24. 3J-7354 [2] SEAL-O-RING  
25. 144-0482 [1] GASKET  
26. 7W-0683 [1] COVER-GALLERY  
27. 0S-1615 [14] BOLT (1/4-20X0.75-IN)  
28. 9S-4182 [2] PLUG (7/16-20-THD)  
29. 131-3719 [6] SEAL-O-RING  
30. 108-6633 Y [6] PUMP GP-FUEL INJECTION  
31. 109-3206 [1] SEAL-O-RING  
32. 9S-8003 [1] PLUG (1/2-20-THD)  
33. 5P-7813 [2] SEAL-O-RING  
34. 9S-8007 [2] PLUG  
35. 7E-6011 [6] LIFTER AS  
36. 7E-9907 [6] SPACER (34.8X42.125X6.76-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP55980081
 

4N-3949: PUMP GP-FUEL TRANSFER

4N-3949 PUMP GP-FUEL TRANSFER
PART OF 309-7001 ENGINE AR
i00370432 SEBP5598
4N3949 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 627B WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5481 CY [1] PUMP GP-FUEL TRANSFER  
2. 4N-5434 [1] GASKET  
3. 4B-3388 [2] BOLT (5/16-18X1.125-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP55980082
 

4W-5481: PUMP GP-FUEL TRANSFER

4W-5481 PUMP GP-FUEL TRANSFER
ONE SECTION GEAR
PART OF 4N-3949 PUMP GP-FUEL TRANSFER
i00379665 SEBP5598
4W5481 PUMP GP-FUEL TRANSFER Parts scheme
  For full view, you need register

Parts for your 627B WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-4436 [1] PLUG  
2. 8F-3469 [1] SEAL-O-RING  
3. 7E-5346 [1] VALVE AS  
4. 3K-8460 [1] PLUG (1/2-20-THD)  
  1J-9671 [1] SEAL-O-RING  
5. 8S-4368 [1] GEAR-TRANSFER PUMP (10-TEETH)(10 TEETH)  
6. 6N-4440 [1] COVER-TRANSFER PUMP  
7. 4N-7465 [1] GASKET  
8. 7S-4440 [1] BOLT  
9. 2P-4252 [1] SPRING  
10. 2W-3294 [1] PLUNGER AS-VALVE  
11. 0S-1618 [6] BOLT (5/16-18X1-IN)  
12. 4W-5480 [1] BODY AS-TRANSFER PUMP  
13. 8F-6058 [2] BEARING  
14. 6V-8977 [1] SEAL-LIP TYPE  
15. 5P-9294 [1] SEAL-LIP TYPE  
16. 1W-6178 [1] SHAFT-IDLER  
17. 6J-2419 [1] SEAL-O-RING  
18. 6N-4441 [1] SHAFT AS-FUEL PUMP  
  8S-4368 [1] GEAR-TRANSFER PUMP (10-TEETH)(10 TEETH)  
 

#SEBP55980083
 

130-3048: PUMP GP-GOV & FUEL INJ

130-3048 PUMP GP-GOV & FUEL INJ
PART OF 309-7001 ENGINE AR
i00158416 SEBP5598
1303048 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 627B WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 111-9363 Y [1] PUMP GP-FUEL INJECTION  
2. 2D-6392 [1] SEAL-O-RING  
  5P-6620 [1] SEAL-O-RING  
  8N-6680 [1] SCREEN AS (GOV & FUEL INJ PUMP)  
3. 2N-2878 [1] SPRING  
4. 5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
5. 8N-9382 [1] GASKET  
6. 124-5658 Y [1] CONTROL GP-FUEL RATIO  
7. 2W-5448 [1] COVER  
  7E-6785 [1] GASKET  
8. 2W-6660 Y [1] TORQUE CONTROL GP  
9. 2W-7325 Y [1] GOVERNOR GP  
10. 9Y-4913 Y [1] FASTENER GP-FUEL INJ PUMP  
11. 8N-3094 [1] SPRING-DETENT  
12. 033-5879 [1] SEAL-O-RING  
13. 8J-8343 [1] SEAL-O-RING  
14. 8M-8515 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP55980084
 

2W-6660: TORQUE CONTROL GP

2W-6660 TORQUE CONTROL GP
PART OF 130-3048 PUMP GP-GOV & FUEL INJ
i00122045 SEBP5598
2W6660 TORQUE CONTROL GP Parts scheme
  For full view, you need register

Parts for your 627B WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-6452 [1] INSULATOR  
2. 6L-5897 C [2] BOLT (1/4-20X0.875-IN)  
3. 8M-9062 [1] RETAINER-SPRING (3.05-MM THK)  
4. 2W-7234 C [1] BAR-LOAD STOP (4-MM)  
5. 2P-2685 [1] SPACER (0.635-MM THK)  
6. 8N-7520 [1] SPRING-TORQUE (0.559-MM THK)  
7. 7N-1796 [1] SPACER (1.549-MM THK)  
8. 7W-8405 C [1] CONTACT  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP55980085
 

1W-0141: SOLENOID GP-SHUTOFF

1W-0141 SOLENOID GP-SHUTOFF
24-VOLT
PART OF 309-7001 ENGINE AR
i00158160 SEBP5598
1W0141 SOLENOID GP-SHUTOFF Parts scheme
  For full view, you need register

Parts for your 627B WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 110-6465 C [1] SOLENOID (ENGINE SHUTOFF)  
2. 7B-2742 [2] BOLT (1/4-20X1.25-IN)  
  5G-2003 [2] SPACER (6.8X13X10-MM THK)  
3. 6I-2002 [1] GASKET  
  9S-3263 AB COMPOUND-THREAD LOCK  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP55980086
 

309-4517: KIT-ENGINE PARTS

309-4517 KIT-ENGINE PARTS
PART OF 309-4526 CONVERSION AR-ENGINE
FOR USE WITH REHS3566, 3406 EMISSIONS UPGRADE GROUP RETROFIT TO TIER I EQUIVALENT LEVEL, FOR 621,621B,623B,627B TRACTOR & 621B SCRAPER, (2DB)DV049- 70V16835-UP, (6XB)DV050- 70V16835-UP, (7KC)DV055- 70V16835-UP, (8HC)DV056- 70V16835-UP, (45P)RM336- 70V16835-UP, (46P)RM337- 70V16835-UP, (14S)RM338- 70V16835-UP, (2GB)RM431- 70V16835-UP, 8N-5405 & 5R-6706 ENGINE ARRANGEMENTS
i03881912 SEBP5598
  For full view, you need register

Parts for your 627B WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4N-2109 [1] ADAPTER-DAMPER  
  7C-9198 [3] BLOCK  
  6V-7698 [8] BOLT (1/4-20X3.25-IN)  
  128-7794 [1] BOLT-TAMPERPROOF (1/4-20X1.125-IN)  
  128-7796 [1] BOLT-TAMPERPROOF (1/4-20X3.75-IN)  
  141-2672 [1] BRACKET  
  141-2674 [1] BRACKET  
  141-2675 [1] BRACKET  
  141-2676 [1] BRACKET AS  
  132-7446 [1] CARRIER AS  
  132-7444 [1] CARRIER-WEIGHT  
  144-3517 [2] CLAMP AS  
    (EACH INCLUDES)
  1W-9168 [1] CLAMP-FUEL LINE (NON-THREADED)  
  2R-4761 [1] SLEEVE  
  1W-9167 [4] CLAMP AS-FUEL LINE  
    (EACH INCLUDES)
  1W-9168 [1] CLAMP-FUEL LINE (NON-THREADED)  
  9L-9159 [1] SPACER (5/8-IN THK)  
  1W-9168 [20] CLAMP-FUEL LINE (NON-THREADED)  
  1W-9169 [8] CLAMP-FUEL LINE (THREADED)  
  8C-6871 [1] CONNECTOR  
  9M-6522 [1] CONNECTOR (1/2-14 NPTF)  
  9L-5839 [1] COUPLING-EXHAUST  
  100-2847 [1] COVER-FLYWEIGHT  
  167-8126 [1] DAMPER AS  
  030-7946 [1] ELBOW  
  030-7972 [1] ELBOW  
  122-8905 [1] ELBOW  
  4N-2040 [1] ELBOW-DRAIN  
  2N-1287 [1] ELBOW-FLARED  
  1W-3092 [1] ELBOW-OUTLET  
  178-2500 [1] FLANGE  
  7W-0993 [1] GEAR-PUMP DRIVE (64-TEETH)  
  206-2113 I [1] HOSE AS  
  7E-3632 [6] JET AS-PISTON COOLING  
  185-2831 [6] LINE AS-FUEL INJECTION  
    (EACH INCLUDES)
  8L-2779 [1] SEAL-O-RING  
  191-7941 [1] LINE AS-FUEL INJECTION  
  191-7942 [1] LINE AS-FUEL INJECTION  
  191-7943 [1] LINE AS-FUEL INJECTION  
  191-7944 [1] LINE AS-FUEL INJECTION  
  191-7945 [1] LINE AS-FUEL INJECTION  
  191-7946 [1] LINE AS-FUEL INJECTION  
  104-5283 [1] MANIFOLD-EXHAUST  
  180-0035 [1] NUT (7/8-20-THD)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
  1B-4427 [8] NUT-JAM (1/4-20-THD)  
  100-2849 [1] PLATE  
  7N-7878 [2] PLATE-COVER  
  7X-7731 [1] PLUG-PIPE (3/4-14-THD)  
  4P-3337 [1] RACE-FLYWEIGHT  
  4P-7690 [2] RACE-FLYWEIGHT  
  7W-2315 [6] RETAINER  
  9Y-7450 [2] RETAINER  
  100-2851 [1] RING-DRIVE  
  100-2848 [1] RING-GUIDE  
  4P-1638 [1] SCREW  
  104-3038 [2] SCREW-MACHINE  
  5S-1188 [2] SEAL-O-RING  
  4W-2754 [1] SEAL-QUAD RING  
  9X-7715 [1] SEAL-QUAD RING  
  5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
  110-6465 [1] SOLENOID  
  5G-2003 [2] SPACER (6.8X13X10-MM THK)  
  054-4984 [1] SPACER (10X15X8.5-MM THK)  
  108-3612 [4] SPACER (11.13X19.05X53-MM THK)  
  168-2100 [1] SPACER (131.57X163.6X8-MM THK)  
  4P-7691 [1] SPOOL-ADVANCE  
  6I-3666 [1] SPRING  
  1W-3089 [1] SUPPORT-EXHAUST PIPE  
  052-0726 [1] TEE  
  4P-5479 [1] TUBE AS  
  123-2886 [1] TUBE AS  
  7C-1661 [1] TUBE AS-DRAIN  
  119-2130 [4] WEIGHT-GOVERNOR  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP55980087
 

309-4527: KIT-ENGINE PARTS

309-4527 KIT-ENGINE PARTS
PART OF 309-4526 CONVERSION AR-ENGINE
FOR USE WITH REHS3566, 3406 EMISSIONS UPGRADE GROUP RETROFIT TO TIER I EQUIVALENT LEVEL , FOR 621,621B,623B,627B TRACTOR & 621B SCRAPER, (2DB)DV049- 70V16835-UP, (6XB)DV050- 70V16835-UP, (7KC)DV055- 70V16835-UP, (8HC)DV056- 70V16835-UP, (45P)RM336- 70V16835-UP, (46P)RM337- 70V16835-UP, (14S)RM338- 70V16835-UP, (2GB)RM431- 70V16835-UP, 8N-5405 & 5R-6706 ENGINE ARRANGEMENTS
i03882510 SEBP5598
  For full view, you need register

Parts for your 627B WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7C-9198 [3] BLOCK  
  6V-7698 [8] BOLT (1/4-20X3.25-IN)  
  128-7794 [1] BOLT-TAMPERPROOF (1/4-20X1.125-IN)  
  128-7796 [1] BOLT-TAMPERPROOF (1/4-20X3.75-IN)  
  141-2672 [1] BRACKET  
  141-2674 [1] BRACKET  
  141-2675 [1] BRACKET  
  141-2676 [1] BRACKET AS  
  132-7446 [1] CARRIER AS  
  132-7444 [1] CARRIER-WEIGHT  
  144-3517 [2] CLAMP AS  
    (EACH INCLUDES)
  1W-9168 [1] CLAMP-FUEL LINE (NON-THREADED)  
  2R-4761 [1] SLEEVE  
  1W-9167 [4] CLAMP AS-FUEL LINE  
    (EACH INCLUDES)
  1W-9168 [1] CLAMP-FUEL LINE (NON-THREADED)  
  9L-9159 [1] SPACER (5/8-IN THK)  
  1W-9168 [20] CLAMP-FUEL LINE (NON-THREADED)  
  1W-9169 [8] CLAMP-FUEL LINE (THREADED)  
  8C-6871 [1] CONNECTOR  
  9M-6522 [1] CONNECTOR (1/2-14 NPTF)  
  9L-5839 [1] COUPLING-EXHAUST  
  100-2847 [1] COVER-FLYWEIGHT  
  030-7946 [1] ELBOW  
  030-7972 [1] ELBOW  
  122-8905 [1] ELBOW  
  4N-2040 [1] ELBOW-DRAIN  
  2N-1287 [1] ELBOW-FLARED  
  1W-3092 [1] ELBOW-OUTLET  
  178-2500 [1] FLANGE  
  7W-0993 [1] GEAR-PUMP DRIVE (64-TEETH)  
  206-2113 I [1] HOSE AS  
  185-2831 [6] LINE AS-FUEL INJECTION  
    (EACH INCLUDES)
  8L-2779 [1] SEAL-O-RING  
  191-7941 [1] LINE AS-FUEL INJECTION  
  191-7942 [1] LINE AS-FUEL INJECTION  
  191-7943 [1] LINE AS-FUEL INJECTION  
  191-7944 [1] LINE AS-FUEL INJECTION  
  191-7945 [1] LINE AS-FUEL INJECTION  
  191-7946 [1] LINE AS-FUEL INJECTION  
  104-5283 [1] MANIFOLD-EXHAUST  
  180-0035 [1] NUT (7/8-20-THD)  
  8L-5832 [1] NUT-HEX (10-32-THD)  
  1B-4427 [8] NUT-JAM (1/4-20-THD)  
  100-2849 [1] PLATE  
  7N-7878 [2] PLATE-COVER  
  7X-7731 [1] PLUG-PIPE (3/4-14-THD)  
  4P-3337 [1] RACE-FLYWEIGHT  
  4P-7690 [2] RACE-FLYWEIGHT  
  7W-2315 [6] RETAINER  
  9Y-7450 [2] RETAINER  
  100-2851 [1] RING-DRIVE  
  100-2848 [1] RING-GUIDE  
  4P-1638 [1] SCREW  
  104-3038 [2] SCREW-MACHINE  
  5S-1188 [2] SEAL-O-RING  
  4W-2754 [1] SEAL-QUAD RING  
  9X-7715 [1] SEAL-QUAD RING  
  5H-6552 [1] SETSCREW-SOCKET (10-32X1.25-IN)  
  110-6465 [1] SOLENOID  
  5G-2003 [2] SPACER (6.8X13X10-MM THK)  
  054-4984 [1] SPACER (10X15X8.5-MM THK)  
  108-3612 [4] SPACER (11.13X19.05X53-MM THK)  
  4P-7691 [1] SPOOL-ADVANCE  
  6I-3666 [1] SPRING  
  1W-3089 [1] SUPPORT-EXHAUST PIPE  
  052-0726 [1] TEE  
  4P-5479 [1] TUBE AS  
  123-2886 [1] TUBE AS  
  7C-1661 [1] TUBE AS-DRAIN  
  119-2130 [4] WEIGHT-GOVERNOR  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP55980088
 

160-9874: KIT-GASKET

160-9874 KIT-GASKET -SINGLE CYLINDER LINER
PART OF 309-4526 CONVERSION AR-ENGINE
i04946741 SEBP5598
1609874 KIT-GASKET Parts scheme
  For full view, you need register

Parts for your 627B WHEEL TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9L-5854 [1] BAND-FILLER (130.2-MM ID)  
2. 110-2220 [1] SEAL-LINER (MID)  
3. 142-7072 [1] SEAL-LINER (COOLANT)  
4. 142-6217 [1] SEAL-O-RING  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Wiring Polarity on Woodward 2301 Governors{1289}
Wiring Polarity on Woodward 2301 Governors{1289}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of Sleeve Metering Fuel Injection Pump And Governor Service Groups{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Pneumatic Governor Control Lock{1265}
Installation Of Pneumatic Governor Control Lock{1265}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
7000 Series Nozzles{0782}
7000 Series Nozzles{0782}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Test Sequence For Caterpillar 7000 Series Fuel Nozzles {1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM TO INSPECT FUEL SETTINGS, RELABEL, AND RESET IF NECESSARY CERTAIN 3306 PCNA INDUSTRIAL ENGINES USED IN UNDERGROUND COAL MINING APPLICATIONS
PRODUCT IMPROVEMENT PROGRAM TO INSPECT FUEL SETTINGS, RELABEL, AND RESET IF NECESSARY CERTAIN 3306 PCNA INDUSTRIAL ENGINES USED IN UNDERGROUND COAL MINING APPLICATIONS
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Valve Bonnets with Insufficient Hardness
Valve Bonnets with Insufficient Hardness
Specifications
Air Chamber For Engine Governor; And Throttle Lock<BR> (6D4397)
621B, 623B & 627B WHEEL TRACTOR-SCRAPERS AIR SYSTEM AND BRAK
Fuel Injection Pump
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROOL FUEL
Fuel Injection Pump Housing
3306 DIRECT INJECTION VEHICULAR ENGINE WITH NEW SCROOL FUEL
Fuel System Timing
3306 VEHICULAR ENGINE
Fuel Injection Equipment<BR> (Sleeve Metering Fuel System - PC)
3306 VEHICULAR ENGINE
Fuel Injection Equipment<BR> (Sleeve Metering Fuel System - DI)
3306 VEHICULAR ENGINE
Injection Nozzle (7N449)<BR> (Sleeve Metering Fuel System - DI)
3306 VEHICULAR ENGINE
Fuel Injection Equipment<BR> (Scroll Fuel System - PC)
3306 VEHICULAR ENGINE
Fuel Bypass Valve<BR> (Scroll Fuel System-PC)
3306 VEHICULAR ENGINE
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Disassembly and Assembly
Fuel Transfer Pump
SCROLL FUEL SYSTEM FOR 3306 DIRECT INJECTION VEHICULAR ENGIN
Fuel Injection Pumps
SCROLL FUEL SYSTEM FOR 3306 DIRECT INJECTION VEHICULAR ENGIN
Fuel Injection Pump Housing And Governor
SCROLL FUEL SYSTEM FOR 3306 DIRECT INJECTION VEHICULAR ENGIN
Governor
SCROLL FUEL SYSTEM FOR 3306 DIRECT INJECTION VEHICULAR ENGIN
Fuel Injection Pump Housing
SCROLL FUEL SYSTEM FOR 3306 DIRECT INJECTION VEHICULAR ENGIN
Adapter Housing And Levers (Tractor Engine)
3306 VEHICULAR ENGINE FOR 627B TRACTOR & SCRAPER
Adapter Housing And Levers (Scraper Engine)
3306 VEHICULAR ENGINE FOR 627B TRACTOR & SCRAPER
Fuel Injection Pump Housing And Governor
3306 VEHICULAR ENGINE FOR 627B TRACTOR & SCRAPER
Fuel Transfer Pump
3306 VEHICULAR ENGINE FOR 627B TRACTOR & SCRAPER
Fuel Injection Pump Housing And Governor
3306 VEHICULAR ENGINE FOR 627B TRACTOR & SCRAPER
Fuel Injection Pump Housing
3306 VEHICULAR ENGINE FOR 627B TRACTOR & SCRAPER
Governor
3306 VEHICULAR ENGINE FOR 627B TRACTOR & SCRAPER
Fuel Check Valve And Bypass Valve
3306 VEHICULAR ENGINE FOR 627B TRACTOR & SCRAPER
Fuel Injection Pumps
3306 VEHICULAR ENGINE FOR 627B TRACTOR & SCRAPER
Governor Control Rotochamber
621 B & 627B TRACTOR-SCRAPER VEHICLE SYSTEMS
Fuel Injection Nozzles - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump - Install
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Nozzles - Install
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Install
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing and Governor - Remove
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing - Assemble
3304B and 3306B Engines for Caterpillar Built Machines
Fuel Injection Pump Housing - Disassemble
3304B and 3306B Engines for Caterpillar Built Machines
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
Identification Of Fuel Injection Lines And Nozzle Bodies For Different Combustion Systems{1252,1254}
1980/02/25
Remanufactured Short Blocks Are Available For Repairs Of Early 3406 Engines{1201,1101,1102}
1980/03/31
Special Cup Plugs For Use In Oversize (Larger Than Standard Size) Bores In Valve Rocker Arm Shafts{1102}
1980/09/15
Some Test Procedures And Specifications Changed For 9L6884 Fuel Injection Nozzle Assemblies{1254,0651}
1980/09/29
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
Use Two Wrenches On Fuel Line Nuts{1254,1252}
1981/04/13
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
Remove Direct Injection Fuel Nozzles With 6V4061 And 6V4054 Nozzle Pullers{0621}
1981/05/18
Improvements To Optional Modification Of 5P4150 Nozzle Tester{0651,1254}
1981/08/17
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Timing Pin Removed From Governor And Fuel Injection Pump Group; Change To Service Manuals {1286}
1981/09/14
Fuel Shutoff Solenoid Seals Better {1259,1286}
1981/10/26
Part Number For Fuel Injection Pump Group In New Location{1253,1286}
1981/11/09
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
New 6V4818 Driver Available To Install Rack Bearings In Fuel Injection Pump Housings{0622}
1982/02/08
New Broken Link Spring Used In Governor{1264}
1982/04/19
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Change Made To Fuel Nozzle Assembly; New Bleed Screw Used{1254}
1982/07/19
New Torque Specification For Fuel Injection Pump Bushing{1251,1253}
1982/08/09
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Fuel In The Cooling System Or Coolant In The Engine Oil Can Result From Cracked Fuel Nozzle Adapter{1106}
1982/10/18
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
New Gasket And Cover Used On Governors{1264}
1983/04/25
New Fuel Ratio Control Group Has Improved Diaphragm{1278,1257,1251}
1983/08/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
New Valve Assembly And Seal Used In Fuel Transfer Pump{1256}
1984/05/14
New Cylinder Heads, Fuel Nozzles And Fuel Nozzle Adapters Used{1101,1106}
1984/10/29
Bonnet Of Fuel Injection Pump Group Now Serviced Separately{1251,1250}
1984/12/10
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
New Tools Available To Service Fuel Injection Nozzles And Adapters {0706,1254}
1985/01/14
Over Fueling Spring No Longer Used In Governor{1264,1250}
1985/02/04
Internal Seals In 7000 Series Fuel Injection Nozzles Cannot Be Replaced{1254}
1985/03/18
New Compression Washers (Gas Seals) Used On 7000 Series Fuel Injection Nozzles{1254,1250}
1985/04/01
Location Of 6V5135 Setscrews In Fuel Pump Group{1250}
1985/08/12
Thread Lock Now Used On Timing Advance Bolts{1272}
1985/08/12
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Steel Fuel Pump Lifter Used{1250,1251}
1985/09/02
New Bleed Screw Used In Fuel Injection Nozzle{1254}
1985/09/23
Fuel Transfer Pump Improved{1256}
1985/10/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Check Fuel Injection Replacement Pump Installation{1251,1253,1257}
1985/10/28
Bolt Removed From Governor And Fuel Injection Pump Group{1286,1253,1287}
1985/11/18
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
New Material Used For Disc In Valve Assemblies Of Fuel Transfer Pump Groups{1256}
1986/09/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
New Retainer And Improved Housing Keep Water Pump Bearing Tight; Repair For Loosened Bearing{1361}
1977/04/11
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Larger Diameter Holes Are Now Used In The Rocker Arm Shaft To Give More Oil Flow To Rocker Arm Bearings{1102}
1977/11/21
Either Type Sleeve Satisfactory For Governor Servo Piston {1264}
1987/09/28
New Steel Fuel Injection Pump Lifters Should Not Be Mixed With Aluminum Lifters {1281,1250}
1987/09/28
New Air Control Valves Used In Air Operated Governor Controls{1265}
1978/01/09
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Soft Washers And Lockwashers Are Now Used With The Mounting Bolts For Air-Fuel Ratio Control{1278,1264}
1978/03/13
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Different O-Ring Seals Now Used In Fuel Injection Pump Group{1251}
1978/08/28
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing{0626}
1979/01/08
Check Valve Must Be Adjusted Correctly To Let Fuel Flow Through The Return Line And Back To The Tank{1275,1253,1274}
1979/03/12
Ether Starting Aid System Improves Cold Weather Starts{1456}
1979/03/19
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
Part Numbers Of Bearings To Use For Service Replacement In Fuel Injection Pump Housings For Sleeve Metering Fuel Systems; Correction To Special Instruction For Installation.{1253}
1979/05/07
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Method To Prevent High Fuel Pressure In The Injection Pump Housing{1262}
1979/06/18
Fuel Injection Line For Injection Test Bench Is Available From Caterpillar{0652,1250}
1979/07/02
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
New Seal Used Under Retaining Bushing For Fuel Injection Pump Bonnet{1251,1253,1286}
1979/08/13
New Rocker Arms And Rocker Arm Shaft Have Improved Lubrication{1102}
1979/08/27
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Be Sure To Tighten Fuel Injection Line Clamps To The Correct Torque{1252}
1989/09/11
New Shaft Bracket And Oil Supply Plug Used In Rocker Valve Shaft Assembly{1102,7553}
1991/03/25
Use 7E5888 Fuel Injection Pump Housing As A Service Replacement For Pre 1991 Fuel Injection Pump Housings{1253}
1991/09/30
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
Identification Of Remanufactured Direct Injection Fuel Nozzles (DIFN){1254}
1992/04/20
Be Sure The Fuel Injection Pump Housing Is Compatible With 0R0715 And 0R2545 Remanufactured Short Blocks{1201,1253}
1992/08/31
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14
Fuel Injection Pump Improvements{1251}
1994/02/07
Date Code On 7000 Series Fuel Injection Nozzles; New Seals Used In 7000 Series Fuel Injection Nozzles{1254}
1994/05/23
Different Fuel Filter Available To Prevent Premature Wear On Fuel Injection Pump Plungers And Barrels{1261,1251}
1994/07/11
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Spring Guide Press Depth{1287,1284}
1996/01/22
New Components Used In Governor And Fuel Pump Drive Group{1288}
1996/02/12
Fuel Injection Pump Barrel Sealing Face Reconditioning{1251}
1996/03/25
New Governor Weight And Race Increase Durability{1264}
1996/09/30
New O-Ring Seals Used On &quot;Through-Head-Adapter&quot; And &quot;Internal Fuel Lines&quot; In Fuel Injection Lines Groups{1252}
1996/10/21
Fuel Injection Pump Bushings Have New Groove Adjacent To Load Ring {1251}
1996/11/04
Governor Control Cover Assembly Includes New Seal And Improved Cover {1264}
1997/07/07
Manufacturing And Design Improvements Incorporated Into Fuel Injection Nozzle Assemblies{1254}
1997/07/14
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
The Procedure for the Removal of the Electronic Unit Injector has Changed. {1290}
2004/05/10
Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1254}
2006/01/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Improved Manufacturing Processes Are Used for Remanufactured Fuel Injector Nozzles That Are Used in Certain Machine Engines {1251, 1290}
2012/07/09
Reannouncing the Appearance Change to Cat Reman Direct Injection Fuel Nozzles for Certain Machines {1250, 1251, 1290, 1713}
2013/10/17
Cat&reg; Reman Announces New Fuel Pump, Fuel Ratio Control, and Fuel Injector Options for Certain Machine Engines {1251, 1278}
2014/09/04

Caterpillar Parts SIS Catalog 627B :

PUMP GP-FUEL INJECTION
108-6633 PUMP GP-FUEL INJECTION
PROTECTION GP-FUEL SYSTEM
128-7985 PROTECTION GP-FUEL SYSTEM
LINES GP-FUEL RATIO CONTROL
7W-3935 LINES GP-FUEL RATIO CONTROL
LINES GP-FUEL INJECTION
4P-9660 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4P-9659 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
4P-9658 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
119-5979 LINES GP-FUEL INJECTION
LINES GP-FUEL FILTER
4N-2292 LINES GP-FUEL FILTER
PUMP GP-FUEL TRANSFER
4N-3949 PUMP GP-FUEL TRANSFER
PUMP GP-FUEL TRANSFER
4W-5481 PUMP GP-FUEL TRANSFER
PUMP GP-GOV & FUEL INJ
130-3048 PUMP GP-GOV & FUEL INJ
TORQUE CONTROL GP
2W-6660 TORQUE CONTROL GP
SOLENOID GP-SHUTOFF
1W-0141 SOLENOID GP-SHUTOFF
309-4517 KIT-ENGINE PARTS
309-4527 KIT-ENGINE PARTS
KIT-GASKET
160-9874 KIT-GASKET

Truck sale:

 
 
Caterpillar 627B
- Water Tankers
WHEELER MACHINERY CO.
 
30,000 
Caterpillar 627B, water trucks, Transport
- water trucks
WHEELER MACHINERY CO.
Caterpillar 627B, Road Scraper, Construction
47,500 
Caterpillar 627B, Road Scraper, Construction
- Road Scraper
WAGNER EQUIPMENT CO
Caterpillar 627B, Road Scraper, Construction
47,500 
Caterpillar 627B, Road Scraper, Construction
- Road Scraper
WAGNER EQUIPMENT CO
Caterpillar 627B, Road Scraper, Construction
26,350 
Caterpillar 627B, Road Scraper, Construction
- Road Scraper
BUTLER MACHINERY COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.