SUSPENSION SYSTEM
CYLINDER GPFRAME GP-SUSPENSION
SUSPENSION GP
OPERATOR STATION
AIR CONDITIONER GPCAB GP
SUSPENSION SYSTEM
CYLINDER GP
#SEBP56040530
341-4122: CYLINDER GP-SUSPENSION
341-4122 CYLINDER GP-SUSPENSION -FRONT
S/N WWA1-UP
150-MM (5.9-IN) BORE X 152-MM (5.98-IN) STROKE
PART OF 210-1886 CYLINDER & MTG GP-SUSPENSION
S/N WWA1-UP
150-MM (5.9-IN) BORE X 152-MM (5.98-IN) STROKE
PART OF 210-1886 CYLINDER & MTG GP-SUSPENSION
For full view, you need register
Parts for your 725 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 200-4290 | [1] | PISTON | |
| 2. | 200-4291 | [1] | HEAD | |
| 3. | 201-1311 | [1] | RETAINER | |
| 4. | 226-9768 | [1] | ROD AS | |
| 4A. | 6V-5003 | [1] | BEARING | |
| 5. | 440-2667 | [3] | VALVE AS | |
| (EACH INCLUDES) | ||||
| 440-2668 | [1] | CORE-VALVE | ||
| 242-4313 | [1] | SEAL-O-RING | ||
| 6. | 266-5945 | [1] | PLATE-COVER | |
| 7. | 341-3191 J | [1] | SEAL-U-CUP | |
| 8. | 364-1371 | [1] | CYLINDER AS | |
| 8A. | 6V-5003 | [1] | BEARING | |
| 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | ||
| 8C-3229 | [1] | RING-RETAINING | ||
| 8T-1159 M | [1] | BOLT-SOCKET HEAD (M10X1.5X25-MM) | ||
| 9. | 095-1633 J | [1] | SEAL-O-RING | |
| 10. | 116-3589 J | [1] | RING | |
| 11. | 198-2643 J | [1] | RING-BACKUP | |
| 12. | 268-6488 | [1] | FILM-WARNING (HIGH PRESSURE CYLINDER) | |
| 13. | 335-8964 J | [1] | SEAL AS-BUFFER | |
| 14. | 335-8966 J | [1] | SEAL-WIPER | |
| 15. | 4B-9786 | [2] | BALL | |
| 16. | 8F-8733 J | [1] | SEAL-O-RING | |
| 17. | 8T-4171 M | [2] | BOLT (M6X1X12-MM) | |
| 18. | 8T-4190 M | [1] | BOLT (M16X2X25-MM) | |
| 19. | 9X-3579 J | [1] | RING-WEAR | |
| 20. | 9X-3601 J | [1] | SEAL AS | |
| 21. | 9X-8257 | [1] | WASHER (17.5X30X3.5-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 416-0092 J | [1] | KIT-HYD CYLINDER SEAL | ||
| (INCLUDES RINGS & SEALS) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
#SEBP56040531
138-1464: FRAME GP-CENTER SUSPENSION
138-1464 FRAME GP-CENTER SUSPENSION
S/N WWA1-UP
PART OF 149-0132 AXLE AR-CENTER
ALSO AN ATTACHMENT
S/N WWA1-UP
PART OF 149-0132 AXLE AR-CENTER
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 725 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 152-0604 M | [4] | BOLT (M24X3X300-MM) | |
| 2. | 9X-8257 | [8] | WASHER (17.5X30X3.5-MM THK) | |
| 3. | 185-2752 | [1] | LINK & BEARING AS | |
| 3A. | 148-5563 | [2] | BEARING-SPHERICAL | |
| 156-4503 | [1] | ROD | ||
| 4. | [1] | RING-CLAMP | ||
| 5. | 158-7749 | [1] | BEARING-SPHERICAL | |
| 6. | 174-9955 | [1] | FRAME AS-SUSPENSION | |
| 7. | 176-7459 | [1] | COVER-RUBBER | |
| 8. | 196-8827 | [2] | SEAL | |
| 9. | 197-3120 | [1] | BRACKET-STABILIZER | |
| 10. | 233-6977 | [4] | WASHER-HARD (26X40X8-MM THK) | |
| 11. | 8T-0668 M | [2] | BOLT (M24X3X110-MM) | |
| 12. | 8T-0367 M | [4] | BOLT (M24X3X260-MM) | |
| 13. | 8T-7505 M | [2] | BOLT (M20X2.5X220-MM) | |
| 14. | 8T-0161 M | [2] | BOLT (M20X2.5X240-MM) | |
| 15. | 8T-3282 | [8] | WASHER-HARD (22X35X3.5-MM THK) | |
| 16. | 6V-7742 M | [4] | NUT-FULL (M20X2.5-THD) | |
| 17. | 6V-8237 | [6] | WASHER (26X44X4-MM THK) | |
| 18. | 8T-4223 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 19. | 8T-4244 M | [6] | NUT (M12X1.75-THD) | |
| 20. | 8T-6868 M | [6] | BOLT (M12X1.75X80-MM) | |
| 21. | 8T-7338 M | [8] | BOLT (M16X2X45-MM) | |
| M | METRIC PART | |||
#SEBP56040532
175-6924: FRAME GP-FRONT SUSPENSION
175-6924 FRAME GP-FRONT SUSPENSION
S/N WWA1-UP
PART OF 148-9965 AXLE AR-FRONT
S/N WWA1-UP
PART OF 148-9965 AXLE AR-FRONT
For full view, you need register
Parts for your 725 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6Y-4457 | [1] | BEARING-ALIGNING | |
| 2. | 231-7071 | [4] | BOLT (M24X3X315-MM) | |
| 3. | [1] | PLATE-STABILIZER | ||
| 4. | 175-6926 | [1] | FRAME AS-SUSPENSION | |
| 5. | 176-7187 | [1] | SLEEVE-TAPERED | |
| 6. | 178-7360 | [1] | SEAL-BEARING | |
| 7. | 198-7316 | [1] | WASHER-SPECIAL | |
| 8. | 259-0972 | [1] | COLLAR-RETAINING | |
| 9. | 365-4130 | [1] | LINK & BEARING AS | |
| 9A. | 148-5563 | [2] | BEARING-SPHERICAL | |
| 156-1506 | [1] | ROD | ||
| 10. | 172-6459 M | [2] | BOLT (M20X2.5X260-MM) | |
| 11. | 233-6978 | [2] | WASHER-HARD (26X50X8-MM THK) | |
| 12. | 8T-0367 M | [4] | BOLT (M24X3X260-MM) | |
| 13. | 8T-0658 M | [2] | BOLT (M20X2.5X180-MM) | |
| 14. | 5P-8245 | [11] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 15. | 8T-3282 | [8] | WASHER-HARD (22X35X3.5-MM THK) | |
| 16. | 6V-7742 M | [4] | NUT-FULL (M20X2.5-THD) | |
| 17. | 6V-8237 | [6] | WASHER (26X44X4-MM THK) | |
| 18. | 6V-5696 M | [3] | BOLT (M12X1.75X80-MM) | |
| 19. | 6V-8336 M | [8] | BOLT (M12X1.75X70-MM) | |
| M | METRIC PART | |||
#SEBP56040533
137-5003: FRAME GP-REAR SUSPENSION
137-5003 FRAME GP-REAR SUSPENSION
S/N WWA1-UP
PART OF 149-0138 AXLE AR-REAR
ALSO AN ATTACHMENT
S/N WWA1-UP
PART OF 149-0138 AXLE AR-REAR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 725 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 152-0604 M | [4] | BOLT (M24X3X300-MM) | |
| 2. | 185-2753 | [1] | LINK & BEARING AS | |
| 2A. | 148-5563 | [2] | BEARING-SPHERICAL | |
| 236-4778 | [1] | ROD (AXLE STABILIZER) | ||
| 3. | 9X-8257 | [8] | WASHER (17.5X30X3.5-MM THK) | |
| 4. | [1] | RING-CLAMP | ||
| 5. | 158-7749 | [1] | BEARING-SPHERICAL | |
| 6. | 192-8765 | [1] | FRAME AS-SUSPENSION | |
| 7. | 197-3120 | [1] | BRACKET-STABILIZER | |
| 8. | 233-6977 | [4] | WASHER-HARD (26X40X8-MM THK) | |
| 9. | 8T-0367 M | [6] | BOLT (M24X3X260-MM) | |
| 10. | 8T-7505 M | [4] | BOLT (M20X2.5X220-MM) | |
| 11. | 7X-0851 M | [2] | NUT (M24X3-THD) | |
| 12. | 8T-3282 | [8] | WASHER-HARD (22X35X3.5-MM THK) | |
| 13. | 6V-7742 M | [4] | NUT-FULL (M20X2.5-THD) | |
| 14. | 6V-8237 | [8] | WASHER (26X44X4-MM THK) | |
| 15. | 8T-4223 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 16. | 8T-4244 M | [6] | NUT (M12X1.75-THD) | |
| 17. | 8T-6868 M | [6] | BOLT (M12X1.75X80-MM) | |
| 18. | 8T-7338 M | [8] | BOLT (M16X2X45-MM) | |
| M | METRIC PART | |||
#SEBP56040534
137-5004: SUSPENSION GP-REAR EQUALIZER
137-5004 SUSPENSION GP-REAR EQUALIZER
S/N WWA1-UP
PART OF 149-0131, 196-9226, 207-4726 FRAME AR-REAR
ALSO AN ATTACHMENT
S/N WWA1-UP
PART OF 149-0131, 196-9226, 207-4726 FRAME AR-REAR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 725 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-9452 | [6] | PLUG | |
| 2. | 193-2113 | [2] | CAP-END | |
| 3. | 175-3587 | [4] | BUSHING AS | |
| 4. | 195-5789 C | [4] | MOUNT AS | |
| 5. | 219-7364 | [2] | ARM AS | |
| 6. | 8T-4132 M | [16] | NUT (M16X2-THD) | |
| 7. | 8T-4140 M | [16] | BOLT (M16X2X60-MM) | |
| 8. | 6V-8237 | [6] | WASHER (26X44X4-MM THK) | |
| 9. | 6V-8133 M | [6] | BOLT (M24X3X80-MM) | |
| 10. | 9X-8257 | [32] | WASHER (17.5X30X3.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP56040535
281-3097: AIR CONDITIONER & MOUNTING GP
281-3097 AIR CONDITIONER & MOUNTING GP
S/N WWA1-UP
PART OF 246-8966 CAB AR
Type 1
S/N WWA1-UP
PART OF 246-8966 CAB AR
Type 1
For full view, you need register
Parts for your 725 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Y-6388 | [1] | LOUVER AS-VENT | |
| 2. | 104-5604 | [4] | WASHER (7.2X25X2-MM THK) | |
| 3. | 120-3950 | [1] | GASKET | |
| 4. | 151-5715 | [1] | LOUVER AS-VENT | |
| 5. | 160-8720 | [1] | PLENUM | |
| 6. | 170-4855 | [1] | PLENUM | |
| 7. | 170-5337 | [1] | GASKET | |
| 8. | 170-5338 | [2] | GASKET | |
| 9. | 170-5339 | [1] | GASKET | |
| 10. | 170-5340 | [2] | GASKET | |
| 11. | 170-5341 | [1] | GASKET | |
| 12. | 170-5342 | [1] | COVER | |
| 13. | 175-7141 M | [6] | NUT-HEX FLANGE (M10X1.5-THD) | |
| 14. | 185-9464 | [3] | LATCH AS (COMPARTMENT) | |
| 15. | 271-9204 Y | [1] | AIR CONDITIONER GP | |
| 16. | 272-0216 | [1] | BRACKET AS | |
| 17. | 104-2091 | [2] | SCREW-FLAT HEAD (6-20X0.5-IN) | |
| 18. | 118-5619 | [2] | SCREW-FLAT HEAD (6-20X1-IN) | |
| 19. | 268-6704 | [1] | FILTER ELEMENT-CAB AIR (AIR CONDITIONER) | |
| 20. | 6V-7357 M | [2] | BOLT (M6X1X25-MM) | |
| 21. | 7X-2533 M | [2] | BOLT (M6X1X35-MM) | |
| 22. | 7X-2619 M | [2] | BOLT (M6X1X10-MM) | |
| 23. | 8T-7004 M | [6] | STUD-TAPERLOCK (M10X1.5X35-MM) | |
| 24. | 9X-2044 M | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 25. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56040536
281-3097: AIR CONDITIONER & MOUNTING GP
281-3097 AIR CONDITIONER & MOUNTING GP
S/N WWA1-UP
PART OF 246-8966 CAB AR
Type 2
S/N WWA1-UP
PART OF 246-8966 CAB AR
Type 2
For full view, you need register
Parts for your 725 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Y-6388 | [1] | LOUVER AS-VENT | |
| 2. | 104-5604 | [4] | WASHER (7.2X25X2-MM THK) | |
| 3. | 120-3950 | [1] | GASKET | |
| 4. | 151-5715 | [1] | LOUVER AS-VENT | |
| 5. | 160-8720 | [1] | PLENUM | |
| 6. | 170-4855 | [1] | PLENUM | |
| 7. | 170-5337 | [1] | GASKET | |
| 8. | 170-5338 | [2] | GASKET | |
| 9. | 170-5339 | [1] | GASKET | |
| 10. | 170-5340 | [2] | GASKET | |
| 11. | 170-5341 | [1] | GASKET | |
| 12. | 170-5342 | [1] | COVER | |
| 13. | 175-7141 M | [6] | NUT-HEX FLANGE (M10X1.5-THD) | |
| 14. | 185-9464 | [3] | LATCH AS (COMPARTMENT) | |
| 15. | 308-9434 CY | [1] | HEATER & AIR CONDITIONER GP | |
| 16. | 272-0216 | [1] | BRACKET AS | |
| 17. | 104-2091 | [2] | SCREW-FLAT HEAD (6-20X0.5-IN) | |
| 18. | 118-5619 | [2] | SCREW-FLAT HEAD (6-20X1-IN) | |
| 19. | 268-6704 | [1] | FILTER ELEMENT-CAB AIR (AIR CONDITIONER) | |
| 20. | 6V-7357 M | [2] | BOLT (M6X1X25-MM) | |
| 21. | 7X-2533 M | [2] | BOLT (M6X1X35-MM) | |
| 22. | 7X-2619 M | [2] | BOLT (M6X1X10-MM) | |
| 23. | 8T-7004 M | [6] | STUD-TAPERLOCK (M10X1.5X35-MM) | |
| 24. | 9X-2044 M | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 25. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56040537
271-9204: AIR CONDITIONER GP
271-9204 AIR CONDITIONER GP
S/N WWA1-UP
PART OF 281-3097 AIR CONDITIONER & MOUNTING GP
Type 1
S/N WWA1-UP
PART OF 281-3097 AIR CONDITIONER & MOUNTING GP
Type 1
For full view, you need register
Parts for your 725 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5464 | [1] | SWITCH AS-THERMOSTAT (HVAC) | |
| 2. | 8C-3756 | [1] | FILM-IDENTIFICATION (AIR CONDITIONER) | |
| 3. | 134-3518 | [2] | TIE-PUSH MOUNT | |
| 4. | 239-9368 | [1] | RESISTOR AS | |
| 5. | 247-8302 | [8] | RIVET | |
| 6. | 257-5029 | [1] | RESISTOR AS | |
| 7. | 259-3222 | [1] | FILTER ELEMENT-AIR (STANDARD EFFICIENCY) | |
| -OR- | ||||
| 266-7765 | FILTER ELEMENT-AIR (STANDARD EFFICIENCY) | |||
| 8. | 299-4728 C | [1] | CASE AS | |
| 6V-9632 M | [17] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [5] | NUT-WELD (M10X1.5-THD) | ||
| 9X-2032 M | [4] | NUT-WELD (M4X0.7-THD) | ||
| 9. | 275-6658 Y | [1] | PAN GP-DRAIN (AIR CONDITIONER) | |
| 10. | 275-6660 | [1] | HARNESS AS-MOTOR (AIR CONDITIONER) | |
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 065-5071 | [4] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 166-5229 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2U-4729 | [1] | GROMMET-BLIND | ||
| 8T-8729 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 9V-2818 | [1] | GROMMET | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0852 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 100-6674 | [3] | SEAL-CONNECTOR | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 11. | 275-6682 J | [1] | GASKET | |
| 12. | 275-6687 J | [1] | GASKET | |
| 13. | 275-6688 J | [1] | GASKET | |
| 14. | 275-6689 J | [1] | GASKET | |
| 15. | 275-6690 Y | [1] | COIL GP-HEATER | |
| 16. | 275-6697 J | [1] | GASKET | |
| 17. | 275-6699 J | [2] | GASKET | |
| 18. | 275-6701 | [1] | COIL AS-EVAPORATOR | |
| 19. | 275-6702 | [1] | PLATE AS | |
| 20. | 275-6704 J | [2] | GASKET | |
| 21. | 153-6932 CJ | [1] | GASKET | |
| 22. | 275-6706 | [1] | MOTOR AS-BLOWER (24-VOLT) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 23. | 275-6708 | [1] | PLATE | |
| 24. | 275-6709 | [1] | PLATE | |
| 25. | 275-6710 | [1] | RETAINER (PUSH ON) | |
| 26. | 096-4034 M | [1] | BOLT-WING (M6X1X15-MM) | |
| 27. | 096-6166 C | [10] | WASHER-HARD (4.5X9X1-MM THK) | |
| 28. | 3B-4501 | [2] | LOCKWASHER | |
| 29. | 5C-9553 CM | [21] | BOLT (M6X1X16-MM) | |
| 30. | 8C-8514 | [2] | SCREW-MACHINE (8-32X0.375-IN) | |
| 31. | 8T-0337 CM | [10] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 33. | 8T-4205 C | [22] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 34. | 292-2905 C | [1] | PLATE AS | |
| 6V-9632 M | [3] | NUT-WELD (M6X1-THD) | ||
| 9X-2032 M | [8] | NUT-WELD (M4X0.7-THD) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 294-8679 J | [1] | KIT-GASKET (AIR CONDITIONER) | ||
| (INCLUDES ADDITIONAL GASKETS) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56040538
271-9204: AIR CONDITIONER GP
271-9204 AIR CONDITIONER GP
S/N WWA1-UP
PART OF 281-3097 AIR CONDITIONER & MOUNTING GP
Type 2
S/N WWA1-UP
PART OF 281-3097 AIR CONDITIONER & MOUNTING GP
Type 2
For full view, you need register
Parts for your 725 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5464 | [1] | SWITCH AS-THERMOSTAT (HVAC) | |
| 2. | 8C-3756 | [1] | FILM-IDENTIFICATION (AIR CONDITIONER) | |
| 3. | 134-3518 | [2] | TIE-PUSH MOUNT | |
| 5. | 247-8302 | [8] | RIVET | |
| 6. | 257-5029 | [1] | RESISTOR AS | |
| 7. | 259-3222 | [1] | FILTER ELEMENT-AIR (STANDARD EFFICIENCY) | |
| 8. | 299-4728 | [1] | CASE AS | |
| 9. | 275-6658 Y | [1] | PAN GP-DRAIN (AIR CONDITIONER) | |
| 10. | 352-2194 C | [1] | HARNESS AS-MOTOR (AIR CONDITIONER) | |
| 9V-2818 | [1] | GROMMET | ||
| 2U-4729 | [1] | GROMMET-BLIND | ||
| 6T-6505 | [2] | HOUSING-RECEPTACLE (BLADE, POSITIVE LOCK) | ||
| 9X-3401 | [11] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [11] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 166-5229 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 194-5226 | [6] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [6] | WIRE AS (14-GA) | ||
| 065-5071 | [4] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 6T-6506 | [2] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 12. | 275-6687 J | [1] | GASKET | |
| 13. | 275-6688 J | [1] | GASKET | |
| 14. | 275-6689 J | [1] | GASKET | |
| 15. | 351-1770 CY | [1] | COIL GP-HEATER | |
| 16. | 275-6697 J | [1] | GASKET | |
| 17. | 275-6699 J | [2] | GASKET | |
| 18. | 275-6701 | [1] | COIL AS-EVAPORATOR | |
| 19. | 275-6702 | [1] | PLATE AS | |
| 20. | 275-6704 J | [2] | GASKET | |
| 21. | 153-6932 J | [1] | GASKET | |
| 22. | 275-6706 | [1] | MOTOR AS-BLOWER (24-VOLT) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 23. | 275-6708 | [1] | PLATE | |
| 24. | 275-6709 | [1] | PLATE | |
| 25. | 275-6710 | [1] | RETAINER (PUSH ON) | |
| 26. | 096-4034 M | [1] | BOLT-WING (M6X1X15-MM) | |
| 27. | 096-6166 | [10] | WASHER-HARD (4.5X9X1-MM THK) | |
| 28. | 3B-4501 | [2] | LOCKWASHER | |
| 29. | 5C-9553 M | [21] | BOLT (M6X1X16-MM) | |
| 30. | 8C-8514 | [2] | SCREW-MACHINE (8-32X0.375-IN) | |
| 31. | 8T-0337 M | [10] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 33. | 8T-4205 | [22] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 34. | 292-2905 | [1] | PLATE AS | |
| 6V-9632 M | [3] | NUT-WELD (M6X1-THD) | ||
| 9X-2032 M | [8] | NUT-WELD (M4X0.7-THD) | ||
| 35. | 362-0658 B | [1] | GASKET | |
| AVAILABLE REPAIR KIT(S): | ||||
| 294-8679 J | [1] | KIT-GASKET (AIR CONDITIONER) | ||
| (INCLUDES GASKETS) | ||||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56040539
227-0747: CAB AR
For full view, you need register
Parts for your 725 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 310-8853 Y | [1] | BATTERY & WIRING GP | ||
| 149-0040 Y | [1] | BOX GP-BATTERY | ||
| 236-5339 Y | [1] | BREATHER GP-POWER TRAIN | ||
| 246-8966 Y | [1] | CAB AR | ||
| 229-8184 Y | [1] | DRAIN GP-ENGINE OIL | ||
| 308-4147 Y | [1] | FENDER GP | ||
| 236-5752 Y | [1] | LINES GP-AIR CONDITIONER | ||
| 149-0012 Y | [1] | LINES GP-DIFFERENTIAL LOCK (FRONT) | ||
| 234-5606 Y | [1] | LINES GP-DRAIN (HYDRAULIC SYSTEM) | ||
| 355-2780 Y | [1] | LINES GP-DRAIN (HYDRAULIC FAN MOTOR) | ||
| 300-4460 Y | [1] | LINES GP-FUEL | ||
| 229-9333 Y | [1] | LINES GP-HEATER | ||
| 234-5604 Y | [1] | LINES GP-HOIST | ||
| 244-8601 Y | [1] | LINES GP-HYDRAULIC FAN | ||
| 234-5608 Y | [1] | LINES GP-PILOT | ||
| 296-1053 Y | [1] | LINES GP-PRESSURE TEST | ||
| 234-5603 Y | [1] | LINES GP-PUMP | ||
| 234-5609 Y | [1] | LINES GP-RETURN | ||
| 234-5605 Y | [1] | LINES GP-STEERING | ||
| 139-4593 Y | [1] | MOUNTING GP-ROPS | ||
| 229-8090 Y | [1] | MUFFLER GP | ||
| 236-5338 Y | [1] | SHIELD GP-EXHAUST | ||
| 328-5175 Y | [1] | STEP GP | ||
| -OR- | ||||
| 425-5754 Y | [1] | STEP GP | ||
| 311-0651 Y | [1] | TANK & MTG GP-FUEL | ||
| 306-5881 Y | [1] | TANK & MTG GP-HYDRAULIC | ||
| 245-2083 Y | [1] | TANK GP-POWER TRAIN OIL (OUTPUT TRANSFER GEAR) | ||
| 249-4615 Y | [1] | TILT GP-PLATFORM | ||
| 264-8055 Y | [1] | VALVE & MTG GP-HOIST CONTROL | ||
| 234-5601 Y | [1] | VALVE & MTG GP-MAIN CONTROL | ||
| Y | SEPARATE ILLUSTRATION | |||
