345-6679 BRACKET GP-SUPPORT S/N TXM1-UP; M4X1-UP AIR COOLED. PROVIDES A BRACKET THAT SECURES A 40 PIN INTERFACE PART OF 342-7863, 365-3524, 417-2599, 422-5494, 431-1464, 442-9567 ENGINE AR-COMPLETE ALSO AN ATTACHMENT 349E L VG

BASIC ENGINE

CYLINDER HEAD GP

0. 345-6679 BRACKET GP

CAMSHAFT GP

1. 361-5596 CAMSHAFT G

CYLINDER BLOCK GP

2. 347-1267 COVER GP-C

HOUSING GP-FLYWHEEL

3. 127-5728 COVER GP-F

HOUSING GP-FRONT

4. 227-2574 COVER GP-F
5. 290-7280 COVER GP-F

VALVE MECHANISM GP

6. 346-9056 COVER GP-V

CRANKSHAFT GP

7. 361-5593 CRANKSHAFT

CYLINDER BLOCK GP

8. 361-4766 CYLINDER B
9. 361-4767 CYLINDER B
0. INFORMATION

EXCAVATOR 349E L VG EXCAVATOR KFX
349E L Excavators KFX00001-UP (MACHINE) POWERED BY C13 Engine SEBP5612 349E L VG KFX (2011)

BASIC ENGINE

CYLINDER HEAD GP

345-6679 BRACKET GP-SUPPORT

331-1981 CYLINDER HEAD AS

331-2477 CYLINDER HEAD GP

331-2478 CYLINDER HEAD GP

198-4963 FASTENER GP-CYLINDER HEAD

269-6164 PLUG GP-ENGINE

349-9354 PLUG GP-ENGINE

#SEBP56120100

345-6679: BRACKET GP-SUPPORT

BRACKET GP-SUPPORT

345-6679 BRACKET GP-SUPPORT
S/N TXM1-UP; M4X1-UP
AIR COOLED. PROVIDES A BRACKET THAT SECURES A 40 PIN INTERFACE
PART OF 342-7863, 365-3524, 417-2599, 422-5494, 431-1464, 442-9567 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i04337714 SEBP5612

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	352-9755	[1]	BRACKET AS
	6V-6716	[2]	RIVET-TRUSS HEAD
	109-1645	[1]	CLIP
2.	5P-7970 M	[2]	NUT (M8X1.25-THD)
3.	9M-1974	[4]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

#SEBP56120101

361-5596: CAMSHAFT GP

CAMSHAFT GP

361-5596 CAMSHAFT GP
S/N TXM1-UP; M4X1-UP
PART OF 358-6892 ENGINE AR-CORE
ALSO AN ATTACHMENT

i04390558 SEBP5612

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	229-5684	[1]	COVER
2.	375-2810	[1]	CAMSHAFT AS
3.	131-3718	[1]	SEAL-O-RING
4.	6V-5217 M	[4]	BOLT (M8X1.25X20-MM)
5.	8T-0338 M	[4]	BOLT-SOCKET HEAD (M8X1.25X45-MM)
6.	9M-1974	[4]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP56120102

347-1267: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

347-1267 COVER GP-CYLINDER BLOCK
S/N TXM1-UP; M4X1-UP
PROVIDES COVERS FOR THE ENGINE OIL PUMP MANIFOLD WHEN NOT REQUIRED FOR OIL FILLERS
PART OF 342-7863, 365-3524, 417-2599, 422-5494, 431-1464, 442-9567 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i04340914 SEBP5612

3471267 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7C-1445	[3]	COVER
2.	061-9455	[3]	SEAL-O-RING
3.	6V-3940 M	[4]	BOLT (M8X1.25X25-MM)
4.	6V-5217 M	[2]	BOLT (M8X1.25X20-MM)
5.	9M-1974	[6]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

#SEBP56120103

127-5728: COVER GP-FLYWHEEL HOUSING

COVER GP-FLYWHEEL HOUSING

127-5728 COVER GP-FLYWHEEL HOUSING
S/N TXM1-UP; M4X1-UP
LEFT STARTER BORE
PART OF 342-7863, 365-3524, 417-2599, 422-5494, 431-1464, 442-9567 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i00827149 SEBP5612

1275728 COVER GP-FLYWHEEL HOUSING Parts scheme

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	483-0773	[1]	COVER

#SEBP56120104

227-2574: COVER GP-FRONT HOUSING

COVER GP-FRONT HOUSING

227-2574 COVER GP-FRONT HOUSING
S/N TXM1-UP; M4X1-UP
PART OF 342-7863, 365-3524, 417-2599, 422-5494, 431-1464, 442-9567 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i02174457 SEBP5612

2272574 COVER GP-FRONT HOUSING Parts scheme

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	285-0823	[1]	COVER
2.	6V-8197 M	[3]	BOLT (M12X1.75X40-MM)
3.	117-8801	[1]	SEAL-O-RING
4.	5P-8245	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
	M		METRIC PART

#SEBP56120105

290-7280: COVER GP-FRONT HOUSING

COVER GP-FRONT HOUSING

290-7280 COVER GP-FRONT HOUSING
S/N TXM1-UP; M4X1-UP
PROVIDES A COVER GP FOR USE WHEN NO OIL FILLER IS SERVICED ON THE FRONT LEFT SIDE OF ENGINE
PART OF 342-7863, 365-3524, 417-2599, 422-5494, 431-1464, 442-9567 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i04402910 SEBP5612

2907280 COVER GP-FRONT HOUSING Parts scheme

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7C-1445	[1]	COVER
2.	061-9455	[1]	SEAL-O-RING
3.	6V-3940 M	[2]	BOLT (M8X1.25X25-MM)
4.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

#SEBP56120106

346-9056: COVER GP-VALVE MECHANISM

COVER GP-VALVE MECHANISM

346-9056 COVER GP-VALVE MECHANISM
S/N TXM1-UP; M4X1-UP
TO PROVIDE A COVER GROUP WITH OIL FILLER
PART OF 342-7863, 365-3524, 417-2599, 422-5494, 431-1464, 442-9567 ENGINE AR-COMPLETE
FOR USE WITH VEHICULAR ENGINE APPLICATIONS WHICH REQUIRE REAR OIL FILLER LOCATION IN VALVE COVER
ALSO AN ATTACHMENT

i04402950 SEBP5612

3469056 COVER GP-VALVE MECHANISM Parts scheme

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	212-7728	[10]	ISOLATOR AS
2.	372-1550	[1]	CAP AS-ENGINE OIL FILLER
2A.	124-1858	[1]	SEAL-O-RING
3.	229-5711	[1]	SEAL-VALVE COVER
4.	346-9058	[1]	COVER-VALVE
5.	8T-4224	[10]	WASHER-HARD (8.8X16X2-MM THK)
6.	8T-6912 M	[10]	BOLT (M8X1.25X50-MM)
	M		METRIC PART

#SEBP56120107

361-5593: CRANKSHAFT GP

CRANKSHAFT GP

361-5593 CRANKSHAFT GP
S/N TXM1-UP; M4X1-UP
PART OF 358-6892 ENGINE AR-CORE
ALSO AN ATTACHMENT

i04390557 SEBP5612

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	211-0587 J	[4]	BEARING-MAIN (STANDARD)
	128-0400 AB		BEARING-MAIN (0.51-MM US)
	128-0401 AB		BEARING-MAIN (0.76-MM US)
	128-0402 AB		BEARING-MAIN (0.51-MM OS)
	128-0403 AB		BEARING-MAIN (0.51-MM OS, 0.51-MM US)
2.	211-0588 J	[3]	BEARING-MAIN (STANDARD)
	128-0382 AB		BEARING-MAIN (0.51-MM US)
	128-0383 AB		BEARING-MAIN (0.76-MM US)
	128-0384 AB		BEARING-MAIN (0.51-MM OS)
	128-0385 AB		BEARING-MAIN (0.51-MM OS, 0.51-MM US)
3.	246-3144 J	[2]	PLATE-THRUST
4.	361-5594	[1]	CRANKSHAFT AS
4A.	6V-3536	[1]	DOWEL
4B.	361-5595	[1]	GEAR-CRANKSHAFT (48-TEETH)
	9Y-0821	[1]	SLEEVE (FRONT)
	9Y-0810	[1]	SLEEVE-WEAR (REAR)

			AVAILABLE REPAIR KIT(S):
	243-6717 J	[1]	KIT-CRANKSHAFT BEARING
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	J		KIT MARKED J SERVICES PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP56120108

361-4766: CYLINDER BLOCK AS

CYLINDER BLOCK AS

361-4766 CYLINDER BLOCK AS
S/N TXM1-UP; M4X1-UP
PART OF 361-4767 CYLINDER BLOCK AS
ALSO AN ATTACHMENT

i04390611 SEBP5612

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	223-6546	[14]	BOLT (M18X2.5X170-MM)
2.	293-9397	[14]	WASHER-HARD (19X34X3.5-MM THK)
3.	207-8572	[7]	CAP-BEARING

#SEBP56120109

361-4767: CYLINDER BLOCK AS

CYLINDER BLOCK AS

361-4767 CYLINDER BLOCK AS
S/N TXM1-UP; M4X1-UP
PART OF 361-4768 CYLINDER BLOCK AS
ALSO AN ATTACHMENT

i04390603 SEBP5612

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	187-8969	[7]	BEARING
2.	Y	[1]	CYLINDER BLOCK AS
	Y		SEPARATE ILLUSTRATION

Information:

BASIC ENGINE

CYLINDER HEAD GP

Operation and Maintenance Manual

Engine Valve Rotators - Inspect
349E Excavator

Special Instruction

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Technical Information Bulletin

C13 Valve Stem Seals Installed Incorrectly{1100, 1101, 7555}
C13 Valve Stem Seals Installed Incorrectly{1100, 1101, 7555}

Specifications

Cylinder Head Valves
C13 Engines for Caterpillar Built Machines

Cylinder Head
C13 Engines for Caterpillar Built Machines

Tool Operating Manual

Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}

Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}

188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}

CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}

{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}

Reuse And Salvage Guidelines

Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}

Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}

Testing and Adjusting

Engine Valve Lash - Inspect/Adjust
C13 Engines for Caterpillar Built Machines

Disassembly and Assembly

Electronic Unit Injector Sleeve - Remove and Install
C13
Engines for Caterpillar Built Machines

Rocker Arm and Shaft - Remove
C13
Engines for Caterpillar Built Machines

Rocker Arm and Shaft - Install
C13
Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Springs - Remove and Install
C13
Engines for Caterpillar Built Machines

Inlet and Exhaust Valves - Remove and Install
C13
Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Guides - Remove and Install
C13
Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Seat Inserts - Remove and Install
C13
Engines for Caterpillar Built Machines

Camshaft Bearings - Remove
C13
Engines for Caterpillar Built Machines

Camshaft Bearings - Install
C13
Engines for Caterpillar Built Machines

Cylinder Head - Remove and Install
C13
Engines for Caterpillar Built Machines

Service Magazine

A New Installation Process Is Used for Valve Stem Seals in Certain C13 Machine Engines {1100, 1104, 1105}
2014/03/24

Caterpillar Parts SIS Catalog 349E L VG :

350-2823 BELT GP-SERPENTINE

346-5480 BASE GP-VALVE COVER

332-3705 BASE GP-VALVE COVER

430-9915 MODULE AR-ENGINE & CEM

346-3696 MODULE AR-ENGINE & CEM

453-7334 INSTALLATION AR-ENGINE

351-4245 INSTALLATION AR-ENGINE

432-8608 INSTALLATION AR-ENG & CEM MOD

361-5596 CAMSHAFT GP

347-1267 COVER GP-CYLINDER BLOCK

127-5728 COVER GP-FLYWHEEL HOUSING

227-2574 COVER GP-FRONT HOUSING

290-7280 COVER GP-FRONT HOUSING

346-9056 COVER GP-VALVE MECHANISM

361-5593 CRANKSHAFT GP

361-4766 CYLINDER BLOCK AS

Truck sale:

333,500

Caterpillar 349ELVG, Construction
- Crawler Excavators
THOMPSON TRACTOR CO., INC.

Caterpillar 349ELVG, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
France

199,000

Caterpillar 349ELVG, Construction
- Crawler Excavators
PATTEN INDUSTRIES, INC.

210,000

Caterpillar 349ELVG, Construction
- Crawler Excavators
PATTEN INDUSTRIES, INC.

Caterpillar 349ELVG, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
France