ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GPSWITCH GP
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
#SEBP56130490
352-8869: STARTING MOTOR GP-ELECTRIC
352-8869 STARTING MOTOR GP-ELECTRIC
S/N TXM1-UP; M4X1-UP
24-VOLT
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
S/N TXM1-UP; M4X1-UP
24-VOLT
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 349E L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9Y-6089 | [1] | GASKET | |
| 2. | 306-8156 | [1] | STRAP AS-GROUND | |
| 3. | 8S-2332 | [3] | BOLT-12 POINT HEAD (5/8-11X1.75-IN) | |
| 4. | 349-6519 Y | [1] | STARTING MOTOR GP-ELECTRIC | |
| 5. | 366-2534 | [1] | HARNESS AS-WIRING | |
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 278-8844 | [1] | PLUG AS-CONNECTOR | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 289-5150 E | SLEEVE (13-CM) | |||
| 5P-1476 | [2] | TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 6. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| 7. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56130491
352-8869: STARTING MOTOR GP-ELECTRIC
352-8869 STARTING MOTOR GP-ELECTRIC
S/N TXM1-UP
24-VOLT
PART OF 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
S/N TXM1-UP
24-VOLT
PART OF 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 349E L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9Y-6089 | [1] | GASKET | |
| 2. | 306-8156 | [1] | STRAP AS-GROUND | |
| 3. | 8S-2332 | [3] | BOLT-12 POINT HEAD (5/8-11X1.75-IN) | |
| 4. | 494-6414 CY | [1] | STARTING MOTOR GP-ELECTRIC | |
| 5. | 366-2534 | [1] | HARNESS AS-WIRING | |
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 278-8844 | [1] | PLUG AS-CONNECTOR | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 455-0704 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 289-5150 E | SLEEVE (13-CM) | |||
| 5P-1476 | [2] | TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 6. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| 7. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56130492
494-6414: STARTING MOTOR GP-ELECTRIC
494-6414 STARTING MOTOR GP-ELECTRIC
S/N TXM1-UP
24-VOLT
PART OF 352-8869 STARTING MOTOR GP-ELECTRIC
S/N TXM1-UP
24-VOLT
PART OF 352-8869 STARTING MOTOR GP-ELECTRIC
For full view, you need register
Parts for your 349E L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7M-0326 | [1] | CONNECTOR | |
| 2. | 9H-3757 | [2] | WASHER (0.516X1X0.094-IN THK) | |
| 3. | 1S-7446 | [3] | SCREW-MACHINE (8-32X0.437-IN) | |
| 4. | 8C-9660 | [3] | WASHER (4.6X7.9X0.8-MM THK) | |
| 5. | 9S-2544 | [9] | SCREW-HEX HEAD (8-32X11.13-MM) | |
| 6. | 7M-0327 | [1] | WASHER-THRUST (17.4X25.4X1.6-MM THK) | |
| 7. | 3T-3418 | [1] | FRAME AS-END | |
| 7A. | 9G-4101 | [1] | BUSHING-END | |
| 3T-3423 | [1] | CUP | ||
| 3T-3424 | [1] | PLUG-FELT | ||
| 8. | 3T-9525 Y | [1] | PLATE AS-BRUSH (STARTING MOTOR) | |
| 9. | 1T-0808 | [2] | WASHER (0.516X0.812X0.09-IN THK) | |
| 10. | 3T-3422 | [1] | WIRE AS | |
| 11. | 533-1539 | [2] | KIT-SEAL | |
| (KIT INCLUDES GASKET, BOOT, O-RINGS, SEAL, & CABLE TIE) | ||||
| 12. | 7X-3373 | [1] | BOLT (5/16-18X0.88-IN) | |
| 13. | 5J-5314 | [5] | BOLT (5/16-18X1.5-IN) | |
| 14. | 3L-3380 | [1] | BUSHING-TERMINAL | |
| 16. | 4M-1853 | [1] | LEVER AS-SHIFT | |
| 17. | 5M-3034 | [1] | LOCKNUT (5/16-24-THD) | |
| 19. | 4M-1831 | [4] | PLUG-LEVER HOUSING | |
| 20. | 4M-1854 | [1] | SHAFT-LEVER | |
| 23. | 7T-3974 | [1] | HOUSING AS-DRIVE | |
| 24. | 6N-3826 | [1] | DRIVE AS-MOTOR | |
| 25. | 2H-3429 | [1] | RING-RETAINING | |
| 26. | 6V-1322 | [4] | BOLT (1/4-20X0.375-IN) | |
| 27. | 8T-4205 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 28. | 6N-3279 | [1] | INSULATOR | |
| 29. | 0S-1597 | [13] | BOLT (1/4-28X1-IN) | |
| 30. | 1M-9971 | [1] | SPACER (0.835X1.72X0.188-IN THK) | |
| 31. | 1H-2629 | [3] | STRIP-INSULATION | |
| 32. | 7M-0324 | [1] | COIL AS-FIELD | |
| 33. | 3R-8797 | [12] | SCREW & WASHER AS (3/8-24X0.72-IN) | |
| 34. | 7F-3488 | [6] | SHOE-POLE | |
| 35. | 7M-8651 | [1] | ARMATURE AS | |
| 36. | 7M-0325 | [1] | INSULATOR | |
| 37. | 3T-9524 | [6] | BRUSH AS | |
| 38. | 3N-3763 | [1] | KIT-TERMINAL (STARTING MOTOR) | |
| 39. | 3R-8801 | [1] | CLAMP | |
| 40. | 8F-1434 | [2] | LOCKWASHER | |
| 41. | 6V-8188 | [6] | NUT (1/2-13-THD) | |
| 42. | 7X-0562 | [6] | WASHER-HARD (13.5X19X0.8-MM THK) | |
| 43. | 4B-2049 | [6] | NUT (10-32-THD) | |
| 44. | 8T-0328 | [10] | WASHER-HARD (5.5X10X1-MM THK) | |
| 45. | 3T-9494 | [6] | SPRING | |
| 46. | 349-6255 | [1] | HOUSING AS | |
| 47. | 9G-4101 | [1] | BUSHING-END | |
| 48. | 3T-3424 | [3] | PLUG-FELT | |
| 49. | 3T-3423 | [3] | CUP | |
| 50. | 1M-9968 | [1] | BUSHING | |
| 52. | 4L-2729 | [1] | WASHER (0.844X1.9X0.188-IN THK) | |
| 53. | 4M-1896 | [1] | BUSHING-TERMINAL | |
| 54. | 045-4065 | [4] | SCREW-MACHINE (10-32X0.75-IN) | |
| 55. | 125-6535 | [1] | COVER-STARTING MOTOR | |
| 56. | 511-7982 | [1] | SOLENOID AS (STARTER) | |
| 3R-8801 | [1] | CLAMP | ||
| 57. | 352-7994 | [1] | KIT-SWITCH (RELAY, STARTER) | |
| (INCLUDES SWITCH AS, COVER, BOLT, ANCHOR & CLAMP) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56130493
357-3849: SWITCH & MTG GP-LIMIT
357-3849 SWITCH & MTG GP-LIMIT -WINDOW WIPER
S/N TFG1-UP; MPZ1-UP
PART OF 316-8853 INSTALLATION AR-CAB
AN ATTACHMENT
S/N TFG1-UP; MPZ1-UP
PART OF 316-8853 INSTALLATION AR-CAB
AN ATTACHMENT
For full view, you need register
Parts for your 349E L EXCAVATOR:
CATERPILLAR SIS#SEBP56130494
7N-0719: SWITCH GP-DISCONNECT
7N-0719 SWITCH GP-DISCONNECT -BATTERY
S/N TFG1-UP; MPZ1-UP
PART OF 328-0248 WIRING GP-CHASSIS
S/N TFG1-UP; MPZ1-UP
PART OF 328-0248 WIRING GP-CHASSIS
For full view, you need register
#SEBP56130495
357-3967: SWITCH GP-LIMIT
357-3967 SWITCH GP-LIMIT -WIPER
S/N TFG1-UP; MPZ1-UP
PART OF 357-3849 SWITCH & MTG GP-LIMIT
AN ATTACHMENT
S/N TFG1-UP; MPZ1-UP
PART OF 357-3849 SWITCH & MTG GP-LIMIT
AN ATTACHMENT
For full view, you need register
Parts for your 349E L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 111-4799 | [1] | SWITCH AS-LIMIT (WIPER) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 5P-0688 | [3] | TUBE | ||
| 3. | 357-3968 | [1] | BRACKET AS | |
| 4. | 357-3971 | [1] | BRACKET | |
| 5. | 096-5962 | [2] | WASHER-HARD (3.4X7X0.8-MM THK) | |
| 6. | 120-9027 M | [2] | SCREW-PAN HEAD (M3X0.5X16-MM) | |
| 7. | 5P-8524 | [1] | GROMMET | |
| 8. | 9X-2042 M | [2] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| M | METRIC PART | |||
#SEBP56130496
334-6464: SWITCH GP-POSITION
334-6464 SWITCH GP-POSITION -HYDRAULIC LOCKOUT
S/N TFG1-532; MPZ1-459
PART OF 316-8822 CONSOLE GP-OPERATOR
ALSO AN ATTACHMENT
S/N TFG1-532; MPZ1-459
PART OF 316-8822 CONSOLE GP-OPERATOR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 349E L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 4I-3038 | [2] | WASHER (3.3X8X0.5-MM THK) | |
| 3. | 111-4799 | [1] | SWITCH AS-LIMIT (HYD LOCKOUT, NEUTRAL START) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-5998 D | TUBE (0.3-M) | |||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 4. | 334-6454 | [1] | KNOB | |
| 5. | 087-4683 | [2] | LOCKWASHER | |
| 6. | 120-9027 M | [2] | SCREW-PAN HEAD (M3X0.5X16-MM) | |
| 7. | 369-4778 | [2] | SCREW-TRUSS HEAD | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#SEBP56130497
383-5711: SWITCH GP-POSITION
383-5711 SWITCH GP-POSITION -HYDRAULIC LOCKOUT
S/N TFG533-UP; MPZ460-UP
PART OF 316-8822 CONSOLE GP-OPERATOR
ALSO AN ATTACHMENT
S/N TFG533-UP; MPZ460-UP
PART OF 316-8822 CONSOLE GP-OPERATOR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 349E L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 4I-3038 | [2] | WASHER (3.3X8X0.5-MM THK) | |
| 3. | 111-4799 | [1] | SWITCH AS-LIMIT (HYDRAULIC LOCKOUT) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 5P-5998 D | TUBE (0.3-M) | |||
| 4. | 383-5712 | [1] | KNOB | |
| 5. | 9B-1117 | [2] | LOCKWASHER | |
| 6. | 120-9027 M | [2] | SCREW-PAN HEAD (M3X0.5X16-MM) | |
| 7. | 5C-8312 M | [2] | NUT (M4X0.7-THD) | |
| 8. | 383-5713 | [2] | PIN | |
| 9. | 383-5714 | [2] | PLATE | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#SEBP56130498
383-5711: SWITCH GP-POSITION
383-5711 SWITCH GP-POSITION -HYDRAULIC LOCKOUT
S/N MPZ1-UP
PART OF 316-8822 CONSOLE GP-OPERATOR
AN ATTACHMENT
S/N MPZ1-UP
PART OF 316-8822 CONSOLE GP-OPERATOR
AN ATTACHMENT
For full view, you need register
Parts for your 349E L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 4I-3038 | [2] | WASHER (3.3X8X0.5-MM THK) | |
| 3. | 111-4799 | [1] | SWITCH AS-LIMIT (HYDRAULIC LOCKOUT) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 5P-5998 D | TUBE (0.3-M) | |||
| 4. | 5C-8312 M | [2] | NUT (M4X0.7-THD) | |
| 5. | 120-9027 M | [2] | SCREW-PAN HEAD (M3X0.5X16-MM) | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#SEBP56130499
383-5751: SWITCH GP-POSITION
383-5751 SWITCH GP-POSITION -HYDRAULIC LOCKOUT
S/N TFG1072-UP; MPZ779-UP
INCLUDES LEVER
PART OF 316-8822 CONSOLE GP-OPERATOR
ALSO AN ATTACHMENT
S/N TFG1072-UP; MPZ779-UP
INCLUDES LEVER
PART OF 316-8822 CONSOLE GP-OPERATOR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 349E L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 4I-3038 | [2] | WASHER (3.3X8X0.5-MM THK) | |
| 3. | 111-4799 | [1] | SWITCH AS-LIMIT (HYDRAULIC LOCKOUT) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-5998 D | TUBE (0.3-M) | |||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 4. | 120-9027 M | [2] | SCREW-PAN HEAD (M3X0.5X16-MM) | |
| 5. | 087-4683 | [2] | LOCKWASHER | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
Information:
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
Disassembly and Assembly
