AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

451-6477 WIRING GP-HEATER -FUMES DISPOSAL HEATER S/N TFG1-UP; MPZ1-UP FIELD INSTALLATION 349E L EXCAVATOR


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL
POWER TRAIN AR

EXCAVATOR 349E L EXCAVATOR MPZ
 349E L Excavators MPZ00001-UP (MACHINE) POWERED BY C13 Engine SEBP5613 349E L MPZ   (2011)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-FRONT
336-6020 WIRING GP-FRONT
WIRING GP-FRONT
369-0107 WIRING GP-FRONT
WIRING GP-HEATER
451-6477 WIRING GP-HEATER
WIRING GP-PLATFORM
319-0878 WIRING GP-PLATFORM
WIRING GP-SENSOR
349-6154 WIRING GP-SENSOR
WIRING GP-UNIT INJECTOR
345-6734 WIRING GP-UNIT INJECTOR
 

#SEBP56130560
 

451-6477: WIRING GP-HEATER

451-6477 WIRING GP-HEATER -FUMES DISPOSAL HEATER
S/N TFG1-UP; MPZ1-UP
FIELD INSTALLATION
i05959146 SEBP5613
4516477 WIRING GP-HEATER Parts scheme
  For full view, you need register

Parts for your 349E L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [6] STRAP-CABLE  
2. 7K-1181 [10] STRAP-CABLE  
3. 451-1946 [1] HARNESS AS-HEATER  
  9X-3402 [1] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [1] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  125-7874 TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS,WEDGE & INTERFACE SEAL)
4. 451-1948 [1] HARNESS AS-WIRING  
  1P-0810 TAPE-ELECTRICAL (15-CM)  
  3S-2093 [3] STRAP-CABLE  
  7Y-3962 [1] TERMINAL-BULLET (MALE)  
  7Y-3964 [1] TUBE (CONNECTOR TERMINAL)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  238-2363 [1] TERMINAL (FEMALE)  
  9X-3401 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
5. 130-5300 [1] CLIP  
6. 4P-7428 [1] CLIP (LADDER)  
7. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
8. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP56130561
 

319-0878: WIRING GP-PLATFORM

319-0878 WIRING GP-PLATFORM
S/N TFG1-UP; MPZ1-UP
PART OF 350-8399 CONTROL & MONITOR GP-CAB
i04046246 SEBP5613
3190878 WIRING GP-PLATFORM Parts scheme 3190878 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 349E L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5169 [1] GUARD-SWITCH  
2. 3S-2093 [14] STRAP-CABLE  
3. 6S-4039 [1] GROMMET  
4. 7G-1060 [1] STRAP AS-GROUND  
5. 7K-1181 [5] STRAP-CABLE  
6. 111-4836 [7] CLIP  
7. 111-4837 [1] CLIP  
8. 116-0118 [6] CLIP  
9. 234-1122 [1] COVER  
10. 301-2981 [1] SWITCH AS-TOGGLE (SECONDARY SHUTDOWN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
11. 360-6291 [1] HARNESS AS-PLATFORM  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [15] STRAP-CABLE  
  8T-8737 [5] PLUG-SEAL  
  9W-0852 [8] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [5] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM)  
  9X-3402 [24] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  2L-8069 [3] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  9X-3401 [13] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-4011 [5] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  230-4013 [1] PLUG AS-CONNECTOR (3-PIN)  
  264-7030 [1] SEAL-CONNECTOR  
  230-5008 [1] PLUG AS-CONNECTOR (4-PIN)  
  264-7031 [1] SEAL-CONNECTOR  
  237-0227 [3] PLUG AS-CONNECTOR (3-PIN)  
    (EACH INCLUDES)
  264-7030 [1] SEAL-CONNECTOR  
  328-0076 [2] RECEPTACLE AS-CONNECTOR (12-PIN)  
  342-2972 [5] CAP-CONNECTOR (2-PIN)  
  342-2973 [4] CAP-CONNECTOR (3-PIN)  
  342-2978 [1] CAP-CONNECTOR (4-PIN)  
12. 319-1260 [2] PANEL  
13. 328-0077 [2] CAP  
14. 328-0119 [1] SHEET  
15. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
16. 132-5789 [3] CLIP (LADDER)  
18. 7X-2621 M [6] BOLT (M10X1.5X12-MM)  
19. 8T-0337 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
20. 8T-4121 [21] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
22. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
23. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
24. 204-1611 [1] STRAP (DUAL)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP56130562
 

349-6154: WIRING GP-SENSOR

349-6154 WIRING GP-SENSOR
S/N TXM1-UP; M4X1-UP
PROVIDE A WIRING GROUP WITH COOLANT TEMPERATURE HARNESS
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
FOR USE WITH EXTERNAL HARNESS
i04038667 SEBP5613
3496154 WIRING GP-SENSOR Parts scheme
  For full view, you need register

Parts for your 349E L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 290-1993 [2] STRAP-CABLE  
2. 349-7699 [1] BRACKET  
3. 101-3129 M [1] STUD (M10X1.5-THD)  
4. 362-1505 Y [1] HARNESS AS-SENSOR (COOLANT TEMPERATURE)  
5. 4P-7581 [1] CLIP (LADDER)  
6. 6V-5215 M [1] BOLT (M8X1.25X16-MM)  
7. 6V-5839 [1] WASHER (11X21X2.5-MM THK)  
8. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56130563
 

345-6734: WIRING GP-UNIT INJECTOR

345-6734 WIRING GP-UNIT INJECTOR
S/N TXM1-UP; M4X1-UP
PROVIDES A WIRING GP TO OPERATE MEUI-C INJECTORS. ALSO CONTAINS COOLANT TEMP PASS THROUGH WIRES.
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
FOR USE WITH COOLANT TEMP JUMPER HARNESS
CANNOT BE USED WITH BRAKES AND/OR IVA
i03998688 SEBP5613
3456734 WIRING GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 349E L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 418-2031 Y [1] HARNESS AS-ENGINE  
2. 208-9277 M [3] BOLT-FLANGE HEAD (M6X1X20-MM)  
3. 359-4892 [1] RING-RETAINING  
4. 359-4893 [1] RING-RETAINING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56130564
 

328-0249: WIRING GP-VALVE

328-0249 WIRING GP-VALVE
S/N TFG1-UP; MPZ1-UP
PART OF 335-0081 ELECTRICAL AR
i04045991 SEBP5613
3280249 WIRING GP-VALVE Parts scheme
  For full view, you need register

Parts for your 349E L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [17] STRAP-CABLE  
2. 4I-7889 [2] SPACER (11X25X45-MM THK)  
3. 7K-1181 [8] STRAP-CABLE  
4. 111-4836 [1] CLIP  
5. 116-0118 [2] CLIP  
6. 204-1673 [3] STRAP-CABLE  
7. 377-8294 [1] HARNESS AS-VALVE  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [10] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [14] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  8T-8737 [6] PLUG-SEAL  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  9X-3402 [6] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [6] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  264-7029 [1] SEAL-CONNECTOR  
  230-4013 [2] PLUG AS-CONNECTOR (3-PIN)  
    (EACH INCLUDES)
  264-7030 [1] SEAL-CONNECTOR  
  243-4508 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
  243-4510 [1] RECEPTACLE AS-CONNECTOR (12-PIN)  
8. 364-0244 [1] BRACKET AS-VALVE  
9. 132-5789 [6] CLIP (LADDER)  
10. 134-3299 [1] GROMMET  
11. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4123 [2] WASHER (22X35X3.5-MM THK)  
13. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
14. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
15. 8T-5005 M [1] BOLT (M10X1.5X70-MM)  
16. 8T-5460 M [2] BOLT (M20X2.5X40-MM)  
17. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
18. 204-1611 [2] STRAP (DUAL)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP56130565
 

333-3036: DRIVE GP-FINAL

333-3036 DRIVE GP-FINAL -WITHOUT MOTOR
S/N TFG1-UP; MPZ1-UP
PART OF 353-0528 DRIVE GP-FINAL
i04045611 SEBP5613
3333036 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349E L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2R-0524 [2] CONE-BEARING  
2. 2R-0525 [2] CUP-BEARING  
3. 3E-2338 [2] PLUG-PIPE  
4. 4I-7576 [14] WASHER (66.3X104X3-MM THK)  
5. 7Y-0661 [3] SHAFT-PLANETARY  
6. 7Y-0662 [4] SHAFT-PLANETARY  
7. 199-4583 [11] BEARING AS  
8. 7Y-0808 B [1] SHIM (1.6-MM THK)  
9. 7Y-1469 [1] COUPLING  
10. 7Y-1470 [1] GEAR-SUN (21-TEETH)  
11. 7Y-1472 B [1] SHIM (0.15-MM THK)  
  7Y-1473 B [1] SHIM (0.3-MM THK)  
  7Y-1474 B [1] SHIM (0.4-MM THK)  
  7Y-1475 B [1] SHIM (0.5-MM THK)  
  7Y-1476 B [1] SHIM (0.6-MM THK)  
  7Y-1477 B [1] SHIM (0.7-MM THK)  
  7Y-1478 B [1] SHIM (0.8-MM THK)  
  7Y-1479 B [1] SHIM (1-MM THK)  
  7Y-1480 B [1] SHIM (1.6-MM THK)  
20. 7Y-1482 [1] CARRIER-PLANETARY  
21. 7Y-1483 [1] GEAR-RING (63-TEETH)  
22. 7Y-1485 [1] CARRIER-PLANETARY  
23. 7Y-1487 [1] GEAR-RING (85-TEETH)  
24. 7Y-1488 [1] CARRIER AS  
  7Y-0656 [3] SHAFT-PLANETARY  
25. 7Y-1491 [1] GEAR-SUN (21-TEETH)  
26. 7Y-1493 [1] SPACER (8.7X50X14-MM THK)  
27. 7Y-1495 [3] GEAR-PLANETARY (29-TEETH)  
28. 7Y-1498 [1] COVER  
29. 7Y-1499 [3] GEAR-PLANETARY (20-TEETH)  
30. 7Y-1504 [4] GEAR-PLANETARY (20-TEETH)  
31. 454-6929 M [20] BOLT (M24X3X190-MM)  
32. 110-7217 [2] RING-RETAINING  
33. 114-1541 [6] PIN-DOWEL  
34. 169-5559 [1] GEAR-SUN (26-TEETH)  
35. 199-4719 [1] GEAR-COUPLING  
36. 227-6048 [12] WASHER (26X40X4-MM THK)  
37. 255-2272 [1] SEAL GP-DUO-CONE  
38. 333-3033 [1] HOUSING-MOTOR  
39. 333-3034 [1] HOUSING-GEAR  
40. 333-3035 [1] PLATE  
41. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
42. 199-4582 [3] BEARING AS  
43. 095-0891 [7] PIN-SPRING  
44. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
45. 4S-5924 [1] SEAL-O-RING  
46. 6V-8133 M [12] BOLT (M24X3X80-MM)  
47. 6V-8200 M [20] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
48. 7M-8485 [2] SEAL-O-RING  
49. 7Y-1484 [1] SPACER (191X221X8.5-MM THK)  
50. 7Y-1492 [2] SPACER (67X101.1X10-MM THK)  
51. 8C-5240 [1] SEAL-O-RING  
52. 8T-3957 M [10] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
53. 451-2177 [20] WASHER-HARD (26X44X4-MM THK)  
54. 451-2182 [20] WASHER-HARD (13.5X25.5X3-MM THK)  
55. 8T-4240 [3] RING-RETAINING  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP56130566
 

353-0527: DRIVE GP-FINAL

353-0527 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N TFG1-UP; MPZ1-UP
PART OF 353-0525 FASTENER GP-FINAL DRIVE
i04045614 SEBP5613
3530527 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349E L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-6399 Y [1] SPROCKET GP (NON-SEGMENTED)  
2. 353-0528 Y [1] DRIVE GP-FINAL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP56130567
 

353-0528: DRIVE GP-FINAL

353-0528 DRIVE GP-FINAL -WITH MOTOR
S/N TFG1-UP; MPZ1-UP
PART OF 353-0527 DRIVE GP-FINAL
i04045608 SEBP5613
3530528 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349E L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 225-4504 Y [1] MOTOR & MTG GP-TRAVEL  
2. 333-3036 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP56130568
 

353-0525: FASTENER GP-FINAL DRIVE

353-0525 FASTENER GP-FINAL DRIVE
S/N TFG1-UP; MPZ1-UP
PART OF 333-2876 POWER TRAIN AR
i04045599 SEBP5613
3530525 FASTENER GP-FINAL DRIVE Parts scheme
  For full view, you need register

Parts for your 349E L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 353-0527 Y [2] DRIVE GP-FINAL (WITH MOTOR, SPROCKET)  
2. 6V-8237 [40] WASHER (26X44X4-MM THK)  
3. 509-7907 M [40] BOLT-HEAD (M24X3X80-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56130569
 

333-2876: POWER TRAIN AR

333-2876 POWER TRAIN AR
S/N TFG1-UP; MPZ1-UP
PART OF 331-7815, 331-7915 COMMON AR
i04045515 SEBP5613
  For full view, you need register

Parts for your 349E L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  305-4935 Y [1] COUPLING GP-PUMP  
  353-0525 Y [1] FASTENER GP-FINAL DRIVE  
  333-2878 Y [1] DRIVE & MTG GP-SWING  
  333-2879 Y [1] GEAR & BEARING GP-SWING  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Caterpillar Parts SIS Catalog 349E L :

WIRING GP-FRONT
369-0107 WIRING GP-FRONT
WIRING GP-FRONT
336-6020 WIRING GP-FRONT
WIRING GP-FRONT
336-6020 WIRING GP-FRONT
WIRING GP-FRONT
336-6020 WIRING GP-FRONT
WIRING GP-FINE SWING
328-0257 WIRING GP-FINE SWING
WIRING GP-ENGINE
426-3720 WIRING GP-ENGINE
WIRING GP-ELECTRONIC CONTROL
362-1381 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
362-1381 WIRING GP-ELECTRONIC CONTROL
WIRING GP-PLATFORM
319-0878 WIRING GP-PLATFORM
WIRING GP-SENSOR
349-6154 WIRING GP-SENSOR
WIRING GP-UNIT INJECTOR
345-6734 WIRING GP-UNIT INJECTOR
WIRING GP-VALVE
328-0249 WIRING GP-VALVE
DRIVE GP-FINAL
333-3036 DRIVE GP-FINAL
DRIVE GP-FINAL
353-0527 DRIVE GP-FINAL
DRIVE GP-FINAL
353-0528 DRIVE GP-FINAL
FASTENER GP-FINAL DRIVE
353-0525 FASTENER GP-FINAL DRIVE

Truck sale:

Caterpillar 349EL, Construction
281,267 USD 
Caterpillar 349EL, Construction
- Crawler Excavators
TOROMONT CAT
Canada
Caterpillar 349EL, Construction
194,901 USD 
Caterpillar 349EL, Construction
- Crawler Excavators
MICHIGAN CAT
Caterpillar 349EL, Construction
302,500 
Caterpillar 349EL, Construction
- Crawler Excavators
PATTEN INDUSTRIES, INC.
Caterpillar 349EL, Construction
218,000 
Caterpillar 349EL, Construction
- Crawler Excavators
HOLT CAT
Caterpillar 349EL, Construction
135,833 
Caterpillar 349EL, Construction
- Crawler Excavators
FINNING CANADA
Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.