OPERATOR STATION
HORN GPCAB GP
GUARD GP
SEAT GP
OPERATOR STATION
HORN GP
#SEBP56131310
336-6293: HORN GP-ELECTRIC
For full view, you need register
Parts for your 349E L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [1] | STRAP-CABLE | |
| 2. | 7Y-3919 | [1] | HORN AS (24-VOLT, LOW TONE) | |
| 3. | 7Y-3920 | [1] | HORN AS (24-VOLT, HIGH TONE) | |
| (EACH HORN AS INCLUDES) | ||||
| 1H-4393 | [2] | LOCKWASHER | ||
| 095-7930 M | [2] | SCREW-MACHINE (M4X0.7X6-MM) | ||
| 4. | 336-6294 | [1] | HARNESS AS-ALARM | |
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8065 | [2] | TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW) | ||
| 2L-8075 | [2] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 243-4505 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 5. | 463-5630 | [1] | BRACKET AS | |
| 6. | 132-5789 | [1] | CLIP (LADDER) | |
| 7. | 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | |
| 8. | 8T-4200 M | [3] | BOLT (M8X1.25X16-MM) | |
| M | METRIC PART | |||
#SEBP56131311
337-5902: HORN GP-ELECTRIC
For full view, you need register
Parts for your 349E L EXCAVATOR:
CATERPILLAR SIS#SEBP56131312
331-7877: INSTALLATION AR
331-7877 INSTALLATION AR -COUNTERWEIGHT REMOVAL
S/N MPZ1-UP
PART OF 382-7308, 415-2956, 425-4907, 435-8384 DISTRIBUTION AR
AN ATTACHMENT
S/N MPZ1-UP
PART OF 382-7308, 415-2956, 425-4907, 435-8384 DISTRIBUTION AR
AN ATTACHMENT
For full view, you need register
Parts for your 349E L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 359-8175 Y | [1] | CAMERA & MOUNTING GP (WORK AREA VISUAL SYSTEM, REAR) | ||
| -OR- | ||||
| 416-5123 Y | [1] | CAMERA & MOUNTING GP (WORK AREA VISUAL SYSTEM, REAR) | ||
| 333-4470 Y | [1] | HANDRAIL GP (PLATFORM) | ||
| 324-5819 Y | [1] | WIRING GP-CAB (CAMERA) | ||
| 328-0294 Y | [1] | WIRING GP-CHASSIS (CAMERA)(COUNTERWEIGHT REMOVAL) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56131313
316-8853: INSTALLATION AR-CAB
316-8853 INSTALLATION AR-CAB -WIPER, LOWER
S/N TFG1-UP; MPZ1-UP
PART OF 360-6545, 360-6546, 360-6547 OPTION AR-CAB
AN ATTACHMENT
S/N TFG1-UP; MPZ1-UP
PART OF 360-6545, 360-6546, 360-6547 OPTION AR-CAB
AN ATTACHMENT
For full view, you need register
Parts for your 349E L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 357-3849 Y | [1] | SWITCH & MTG GP-LIMIT (WINDOW WIPER) | ||
| 327-6524 Y | [1] | BUMPER GP-FRONT | ||
| 353-1973 Y | [1] | LINES GP-WINDOW WASHER | ||
| 324-5768 Y | [1] | SWITCH GP-WIPER (LOWER) | ||
| 327-6489 Y | [1] | WIPER & WASHER GP-WINDOW (LOWER) | ||
| 327-6551 Y | [1] | WIPER GP-WINDOW (UPPER) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56131314
367-9068: KIT-CAB
For full view, you need register
Parts for your 349E L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 346-7907 | [1] | BRACKET | ||
| 346-7908 | [1] | BRACKET AS | ||
| 353-1980 | [2] | HINGE AS | ||
| -OR- | ||||
| 340-6592 | [2] | HINGE AS | ||
| 346-7925 | [4] | LEVER | ||
| 346-7924 J | [1] | LOCK AS | ||
| 085-6449 | [1] | PACKING | ||
| 4I-4361 | [1] | RETAINER | ||
| 271-9408 M | [4] | SCREW-TRUSS HEAD (M5X0.8X10-MM) | ||
| 346-7906 | [1] | VISOR | ||
| 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | ||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
#SEBP56131315
398-7289: KIT-GUARD
398-7289 KIT-GUARD
S/N TFG1-UP; MPZ1-UP
FOR USE WITH 336E EXCAVATOR, FOGS KIT, 70/30 CONFIGURATION
FIELD INSTALLATION
S/N TFG1-UP; MPZ1-UP
FOR USE WITH 336E EXCAVATOR, FOGS KIT, 70/30 CONFIGURATION
FIELD INSTALLATION
For full view, you need register
Parts for your 349E L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 6V-7357 M | [8] | BOLT (M6X1X25-MM) | ||
| 4E-1487 | [2] | KNOB | ||
| 7Y-0623 M | [2] | LOCKNUT (M16X2-THD) | ||
| 5D-4822 | [4] | RING-RETAINING | ||
| 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | ||
| 8T-4908 M | [6] | BOLT (M8X1.25X25-MM) | ||
| 8Y-5745 | [2] | LATCH AS | ||
| 9X-6165 | [2] | WASHER (6.5X22X2.5-MM THK) | ||
| 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | ||
| 9X-8257 | [2] | WASHER (17.5X30X3.5-MM THK) | ||
| 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 186-3782 | [2] | BOSS | ||
| 336-1163 | [2] | BRACKET AS | ||
| 342-3715 | [1] | BRACKET AS | ||
| 342-3717 | [1] | BRACKET AS | ||
| 416-0862 | [2] | CUSHION | ||
| 346-7367 | [1] | PEDAL AS | ||
| 346-7370 | [1] | PEDAL AS | ||
| 342-3723 | [2] | SPRING AS-GAS (FRONT WINDOW GUARD) | ||
| 357-3956 | [2] | STRIKER AS | ||
| (EACH INCLUDES) | ||||
| 8T-3612 M | [3] | NUT-WELD (M8X1.25-THD) | ||
| 127-3947 | [2] | BUMPER | ||
| 298-4195 | [1] | FILM-CERTIFICATION (OPS GUARD, READ OMM, ENGLISH) | ||
| 219-0305 | [2] | FILM-WARNING (NO WELD, NO DRILL, READ OMM) | ||
| 203-4457 | [2] | GROMMET | ||
| 336-1161 | [1] | GUARD AS | ||
| 8T-4132 M | [1] | NUT (M16X2-THD) | ||
| 8T-4133 M | [1] | NUT (M10X1.5-THD) | ||
| 9R-2672 M | [1] | BOSS-THREADED (M10X1.5X120-MM) | ||
| 095-1207 M | [4] | NUT (M12X1.75-THD) | ||
| 201-4534 M | [2] | BOLT (M16X2X26-MM) | ||
| 172-5291 M | [8] | SCREW (M10X1.5X30-MM) | ||
| 336-1159 | [1] | SUPPORT AS | ||
| 336-1160 | [1] | SUPPORT AS | ||
| (ABOVE PARTS ARE PART OF GROUP 316-8831) | ||||
| 7X-2475 M | [4] | BOLT (M16X2X130-MM) | ||
| 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | ||
| 349-5364 | [1] | BRACKET AS | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 298-4196 | [1] | FILM-CERTIFICATION (OPS GUARD, READ OMM) | ||
| 344-0791 | [1] | FILM-INSTRUCTION (ALTERNATE EXIT) | ||
| 219-0305 | [1] | FILM-WARNING (NO WELD, NO DRILL, READ OMM) | ||
| 336-1197 | [1] | GUARD AS | ||
| 5C-7261 M | [4] | NUT (M8X1.25-THD) | ||
| 8T-4133 M | [2] | NUT (M10X1.5-THD) | ||
| 7X-0515 | [4] | WASHER-HARD (17X35X5-MM THK) | ||
| 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | ||
| (ABOVE PARTS ARE PART OF GROUP 336-1196) | ||||
| 336-5964 Y | [2] | HARNESS AS-LIGHTING | ||
| 8T-4191 M | [4] | BOLT (M10X1.5X16-MM) | ||
| 4P-7581 | [2] | CLIP (LADDER) | ||
| 132-5789 | [2] | CLIP (LADDER) | ||
| 7K-1181 | [4] | STRAP-CABLE | ||
| 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | ||
| (ABOVE PARTS ARE PART OF GROUP 319-1198) | ||||
| 8T-4193 M | [1] | BOLT (M16X2X50-MM) | ||
| 316-8989 | [1] | SUPPORT AS | ||
| (ABOVE PARTS ARE PART OF GROUP 327-6553) | ||||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56131316
398-7290: KIT-GUARD
398-7290 KIT-GUARD -FALLING OBJECT
S/N TFG1-UP; MPZ1-UP
FIELD REPLACEMENT ORDER @@@@@484-7816@@@@@
FIELD INSTALLATION
S/N TFG1-UP; MPZ1-UP
FIELD REPLACEMENT ORDER @@@@@484-7816@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your 349E L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 6V-7357 M | [8] | BOLT (M6X1X25-MM) | ||
| 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | ||
| 4E-1487 | [2] | KNOB | ||
| 7Y-0623 M | [2] | LOCKNUT (M16X2-THD) | ||
| 5D-4822 | [4] | RING-RETAINING | ||
| 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 8T-4908 M | [6] | BOLT (M8X1.25X25-MM) | ||
| 127-3947 | [2] | BUMPER | ||
| 8Y-5745 | [1] | LATCH AS | ||
| 095-1207 M | [4] | NUT (M12X1.75-THD) | ||
| 9X-6165 | [2] | WASHER (6.5X22X2.5-MM THK) | ||
| 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | ||
| 9X-8257 | [2] | WASHER (17.5X30X3.5-MM THK) | ||
| 186-3782 | [2] | BOSS | ||
| 336-1163 | [2] | BRACKET AS | ||
| 342-3715 | [1] | BRACKET AS | ||
| 342-3717 | [1] | BRACKET AS | ||
| 298-4195 | [1] | FILM-CERTIFICATION (OPS GUARD, READ OMM, ENGLISH) | ||
| 219-0305 | [1] | FILM-WARNING (NO WELD, NO DRILL, READ OMM) | ||
| 203-4457 | [2] | GROMMET | ||
| 336-1161 | [1] | GUARD AS | ||
| 8T-4132 M | [1] | NUT (M16X2-THD) | ||
| 8T-4133 M | [1] | NUT (M10X1.5-THD) | ||
| 9R-2672 M | [1] | BOSS-THREADED (M10X1.5X120-MM) | ||
| 346-7367 | [1] | PEDAL AS | ||
| 346-7370 | [1] | PEDAL AS | ||
| 201-4534 M | [2] | BOLT (M16X2X26-MM) | ||
| 172-5291 M | [8] | SCREW (M10X1.5X30-MM) | ||
| 342-3723 | [2] | SPRING AS-GAS (FRONT WINDOW GUARD) | ||
| 336-1159 | [1] | SUPPORT AS | ||
| 336-1160 | [1] | SUPPORT AS | ||
| 357-3955 | [2] | CUSHION | ||
| 357-3956 | [2] | STRIKER AS | ||
| (EACH INCLUDES) | ||||
| 8T-3612 M | [3] | NUT-WELD (M8X1.25-THD) | ||
| (ABOVE PARTS ARE PART OF GROUP 316-8831) | ||||
| 7X-2475 M | [4] | BOLT (M16X2X130-MM) | ||
| 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | ||
| 349-5364 | [1] | BRACKET AS | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 298-4196 | [1] | FILM-CERTIFICATION (OPS GUARD, READ OMM) | ||
| 219-0305 | [1] | FILM-WARNING (NO WELD, NO DRILL, READ OMM) | ||
| 7X-0515 | [4] | WASHER-HARD (17X35X5-MM THK) | ||
| 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | ||
| (ABOVE PARTS ARE PART OF GROUP 334-6390) | ||||
| 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | ||
| 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | ||
| 7Y-8561 | [4] | BUMPER | ||
| 334-6391 | [1] | GUARD AS | ||
| 5C-7261 M | [4] | NUT (M8X1.25-THD) | ||
| 8T-3490 M | [8] | NUT-WELD (M10X1.5-THD) | ||
| 334-6408 | [1] | GUARD AS | ||
| 109-0903 | [2] | HINGE | ||
| 234-3402 | [1] | LATCH AS | ||
| 334-6422 | [1] | LEVER | ||
| 8T-4133 M | [8] | NUT (M10X1.5-THD) | ||
| 5D-4822 | [6] | RING-RETAINING | ||
| 3E-8020 M | [4] | SCREW-TRUSS HEAD (M6X1X25-MM) | ||
| 334-6414 | [1] | SEAL | ||
| 334-6405 | [1] | STRIKER AS | ||
| 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 342-3723 | [2] | SPRING AS-GAS (FRONT WINDOW GUARD) | ||
| (ABOVE PARTS ARE PART OF GROUP 357-4102) | ||||
| 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | ||
| 8T-4200 M | [8] | BOLT (M8X1.25X16-MM) | ||
| 235-8929 | [2] | HANDLE | ||
| 334-6427 | [1] | SUPPORT AS | ||
| 327-6479 | [1] | VISOR | ||
| 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4224 | [8] | WASHER-HARD (8.8X16X2-MM THK) | ||
| (ABOVE PARTS ARE PART OF GROUP 105-2169) | ||||
| 334-6429 | [1] | COVER | ||
| 334-6436 | [2] | HINGE AS | ||
| 342-3728 | [2] | HINGE AS | ||
| 342-3731 | [2] | KNOB | ||
| 6I-5342 M | [4] | NUT (M8X1.25-THD) | ||
| 4I-1260 | [2] | PACKING | ||
| 383-5754 | [2] | PACKING | ||
| 340-6594 | [1] | SEAL | ||
| (ABOVE PARTS ARE PART OF GROUP 334-6428) | ||||
| 8T-4191 M | [4] | BOLT (M10X1.5X16-MM) | ||
| 4P-7581 | [2] | CLIP (LADDER) | ||
| 132-5789 | [2] | CLIP (LADDER) | ||
| 223-9818 | [1] | FILM-INSTRUCTION (WINDOW CLEANING, READ OMM) | ||
| 7K-1181 | [4] | STRAP-CABLE | ||
| 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 186-4603 Y | [2] | HARNESS AS-CONTROL (ENGINE, PUMP CONTROL) | ||
| (ABOVE PARTS ARE PART OF GROUP 319-1198) | ||||
| 8T-4193 M | [1] | BOLT (M16X2X50-MM) | ||
| 316-8989 | [1] | SUPPORT AS | ||
| (ABOVE PARTS ARE PART OF GROUP 327-6553) | ||||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56131317
484-7816: KIT-OVERHEAD GUARD
For full view, you need register
Parts for your 349E L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | ||
| 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 235-8929 | [2] | HANDLE | ||
| 334-6427 | [1] | SUPPORT AS | ||
| 340-6594 | [1] | SEAL | ||
| 346-7925 | [4] | LEVER | ||
| 425-6073 | [1] | VISOR | ||
| ABOVE PARTS ARE PART OF THE 340-6668 ROOF HATCH GROUP (LOCATED IN BOX B) | ||||
| 4I-1260 | [2] | PACKING | ||
| 4I-4361 | [1] | RETAINER | ||
| 6I-5342 M | [4] | NUT (M8X1.25-THD) | ||
| 085-6449 | [1] | PACKING | ||
| 271-9408 M | [4] | SCREW-TRUSS HEAD (M5X0.8X10-MM) | ||
| 334-6436 | [2] | HINGE AS | ||
| 342-3728 | [2] | HINGE AS | ||
| 344-0869 | [1] | FILM-INSTRUCTION (ALTERNATE EXIT) | ||
| 346-7907 | [1] | BRACKET | ||
| 346-7908 | [1] | BRACKET AS | ||
| 5C-2874 M | [2] | NUT (M5X0.8-THD) | ||
| 346-7910 | [1] | COVER | ||
| 346-7924 | [1] | LOCK AS | ||
| 383-5754 | [2] | PACKING | ||
| 383-5757 | [2] | KNOB | ||
| ABOVE PARTS ARE PART OF THE 346-7923 ROOF HATCH GROUP (LOCATED IN BOX BA WITHIN BOX B) | ||||
| 3B-4505 | [4] | LOCKWASHER | ||
| 8T-4200 M | [4] | BOLT (M8X1.25X16-MM) | ||
| 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | ||
| ABOVE PARTS ARE (LOCATED IN BOX BB WITHIN BOX B) | ||||
| 316-8989 | [1] | SUPPORT AS | ||
| 394-9460 Y | [1] | MIRROR GP | ||
| 447-1711 M | [1] | BOLT (M16X2X50-MM) | ||
| 451-2175 | [1] | WASHER-HARD (17.5X30X3.5-MM THK) | ||
| ABOVE PARTS ARE PART OF THE 327-6553 REAR VIEW MIRROR GROUP (LOCATED IN BOX C) | ||||
| 4P-7581 | [2] | CLIP (LADDER) | ||
| 7K-1181 | [4] | STRAP-CABLE | ||
| 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4191 M | [4] | BOLT (M10X1.5X16-MM) | ||
| 132-5789 | [2] | CLIP (LADDER) | ||
| 336-5964 Y | [2] | HARNESS AS-LIGHTING | ||
| 339-3505 Y | [2] | LAMP GP-FLOOD (24-VOLT) | ||
| ABOVE PARTS ARE PART OF THE 319-1198 FRONT LIGHTING GROUP (LOCATED IN BOX D) | ||||
| 7X-0515 | [4] | WASHER-HARD (17X35X5-MM THK) | ||
| 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | ||
| 219-0305 | [1] | FILM-WARNING (NO WELD, NO DRILL, READ OMM) | ||
| 349-5364 | [1] | BRACKET AS | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 447-1706 M | [4] | BOLT (M16X2X130-MM) | ||
| ABOVE PARTS ARE PART OF THE 334-6390 OVERHEAD GUARD GROUP (LOCATED IN BOX E) | ||||
| 3E-8020 M | [4] | SCREW-TRUSS HEAD (M6X1X25-MM) | ||
| 5D-4822 | [6] | RING-RETAINING | ||
| 7Y-8561 | [4] | BUMPER | ||
| 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4133 M | [8] | NUT (M10X1.5-THD) | ||
| 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | ||
| 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | ||
| 234-3402 | [1] | LATCH AS | ||
| 334-6391 | [1] | GUARD AS | ||
| 5C-7261 M | [4] | NUT (M8X1.25-THD) | ||
| 8T-3490 M | [8] | NUT-WELD (M10X1.5-THD) | ||
| 334-6405 | [1] | STRIKER AS | ||
| 334-6408 | [1] | GUARD AS | ||
| 109-0903 | [2] | HINGE | ||
| 334-6414 | [1] | SEAL | ||
| 334-6422 | [1] | LEVER | ||
| 342-3723 | [2] | SPRING AS-GAS | ||
| ABOVE PARTS ARE PART OF THE 357-4102 OVERHEAD GUARD GROUP (LOCATED IN BOX EA WITHIN BOX E) | ||||
| 4E-1487 | [2] | KNOB | ||
| 5D-4822 | [4] | RING-RETAINING | ||
| 6V-7357 M | [8] | BOLT (M6X1X25-MM) | ||
| 7Y-0623 M | [2] | LOCKNUT (M16X2-THD) | ||
| 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | ||
| 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 8T-4908 M | [6] | BOLT (M8X1.25X25-MM) | ||
| 8Y-5745 | [2] | LATCH AS | ||
| 9X-6165 | [2] | WASHER (6.5X22X2.5-MM THK) | ||
| 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | ||
| 095-1207 M | [4] | NUT (M12X1.75-THD) | ||
| 127-3947 | [2] | BUMPER | ||
| 172-5291 M | [8] | SCREW (M10X1.5X30-MM) | ||
| 186-3782 | [2] | BOSS | ||
| 201-4534 M | [2] | BOLT (M16X2X26-MM) | ||
| 203-4457 | [2] | GROMMET | ||
| 219-0305 | [1] | FILM-WARNING (NO WELD, NO DRILL, READ OMM) | ||
| 336-1159 | [1] | SUPPORT AS | ||
| 336-1160 | [1] | SUPPORT AS | ||
| 336-1161 | [1] | GUARD AS | ||
| 8T-4133 M | [1] | NUT (M10X1.5-THD) | ||
| 9R-2672 M | [1] | BOSS-THREADED (M10X1.5X120-MM) | ||
| 451-2183 M | [1] | NUT (M16X2-THD) | ||
| 336-1163 | [2] | BRACKET AS | ||
| 342-3717 | [2] | BRACKET AS | ||
| 342-3723 | [2] | SPRING AS-GAS | ||
| 346-7367 | [1] | PEDAL AS | ||
| 346-7370 | [1] | PEDAL AS | ||
| 357-3956 | [2] | STRIKER AS | ||
| (EACH INCLUDES) | ||||
| 8T-3612 M | [3] | NUT-WELD (M8X1.25-THD) | ||
| 416-0862 | [2] | CUSHION | ||
| 451-2175 | [2] | WASHER-HARD (17.5X30X3.5-MM THK) | ||
| ABOVE PARTS ARE PART OF THE 316-8831 FRONT WINDOW GROUP (LOCATED IN BOX F) | ||||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56131318
484-8798: KIT-OVERHEAD GUARD
484-8798 KIT-OVERHEAD GUARD
S/N TFG1-UP; MPZ1-UP
FOR USE WITH @@@@@357-4118@@@@@
FIELD INSTALLATION
S/N TFG1-UP; MPZ1-UP
FOR USE WITH @@@@@357-4118@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your 349E L EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4E-1487 | [2] | KNOB | ||
| 5D-4822 | [4] | RING-RETAINING | ||
| 6V-7357 M | [8] | BOLT (M6X1X25-MM) | ||
| 7Y-0623 M | [2] | LOCKNUT (M16X2-THD) | ||
| 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | ||
| 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 8T-4908 M | [6] | BOLT (M8X1.25X25-MM) | ||
| 8Y-5745 | [2] | LATCH AS | ||
| 9X-6165 | [2] | WASHER (6.5X22X2.5-MM THK) | ||
| 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | ||
| 095-1207 M | [4] | NUT (M12X1.75-THD) | ||
| 127-3947 | [2] | BUMPER | ||
| 172-5291 M | [8] | SCREW (M10X1.5X30-MM) | ||
| 186-3782 | [2] | BOSS | ||
| 201-4534 M | [2] | BOLT (M16X2X26-MM) | ||
| 203-4457 | [2] | GROMMET | ||
| 219-0305 | [2] | FILM-WARNING (NO WELD, NO DRILL, READ OMM) | ||
| 336-1159 | [1] | SUPPORT AS | ||
| 336-1160 | [1] | SUPPORT AS | ||
| 336-1161 | [1] | GUARD AS | ||
| 8T-4133 M | [1] | NUT (M10X1.5-THD) | ||
| 9R-2672 M | [1] | BOSS-THREADED (M10X1.5X120-MM) | ||
| 451-2183 M | [1] | NUT (M16X2-THD) | ||
| 336-1163 | [2] | BRACKET AS | ||
| 342-3717 | [2] | BRACKET AS | ||
| 342-3723 | [2] | SPRING AS-GAS | ||
| 346-7367 | [1] | PEDAL AS | ||
| 346-7370 | [1] | PEDAL AS | ||
| 357-3956 | [2] | STRIKER AS | ||
| (EACH INCLUDES) | ||||
| 8T-3612 M | [3] | NUT-WELD (M8X1.25-THD) | ||
| 416-0862 | [2] | CUSHION | ||
| 451-2175 | [3] | WASHER-HARD (17.5X30X3.5-MM THK) | ||
| ABOVE PARTS ARE PART OF THE 316-8831 FRONT WINDOW GUARD (LOCATED IN BOX B) | ||||
| 7X-0515 | [4] | WASHER-HARD (17X35X5-MM THK) | ||
| 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | ||
| 219-0305 | [1] | FILM-WARNING (NO WELD, NO DRILL, READ OMM) | ||
| 336-1197 | [1] | GUARD AS | ||
| 5C-7261 M | [4] | NUT (M8X1.25-THD) | ||
| 8T-4133 M | [2] | NUT (M10X1.5-THD) | ||
| 349-5364 | [1] | BRACKET AS | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 447-1706 M | [4] | BOLT (M16X2X130-MM) | ||
| ABOVE PARTS ARE PART OF THE 336-1196 OVERHEAD GUARD GROUP (LOCATED IN BOX C) | ||||
| 4P-7581 | [2] | CLIP (LADDER) | ||
| 7K-1181 | [4] | STRAP-CABLE | ||
| 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4191 M | [4] | BOLT (M10X1.5X16-MM) | ||
| 132-5789 | [2] | CLIP (LADDER) | ||
| 336-5964 Y | [2] | HARNESS AS-LIGHTING | ||
| 339-3505 Y | [2] | LAMP GP-FLOOD (24-VOLT) | ||
| ABOVE PARTS ARE PART OF THE 319-1198 FLOOD LIGHTING GROUP (LOCATED IN BOX D) | ||||
| 316-8989 | [1] | SUPPORT AS | ||
| 394-9460 Y | [1] | MIRROR GP | ||
| 447-1711 M | [1] | BOLT (M16X2X50-MM) | ||
| 451-2175 | [1] | WASHER-HARD (17.5X30X3.5-MM THK) | ||
| ABOVE PARTS ARE PART OF THE 327-6553 REAR VIEW MIRROR GROUP (LOCATED IN BOX E) | ||||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56131319
336-1134: KIT-SEAT
336-1134 KIT-SEAT -HIGH BACK, WITH HEATER, VENT
S/N TFG1-UP; MPZ1-UP
PART OF 316-8890 SEAT GP
AN ATTACHMENT
S/N TFG1-UP; MPZ1-UP
PART OF 316-8890 SEAT GP
AN ATTACHMENT
For full view, you need register
