AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

349E L-VG Excavators DGE00001-UP (MACHINE) POWERED BY C13 Engine BASIC ENGINE Caterpillar SIS



EXCAVATOR 349E L VG EXCAVATOR DGE
 349E L-VG Excavators DGE00001-UP (MACHINE) POWERED BY C13 Engine SEBP5614 349E L VG DGE   (2011)

Parts group 349E L VG:

  For full view, you need register
BASIC ENGINE
CAMSHAFT GP
CAMSHAFT GP
361-5596 CAMSHAFT GP
361-5596 CAMSHAFT GP
S/N TXM1-UP; M4X1-UP
PART OF 358-6892, 521-5943 ENGINE AR-CORE
CLUTCH GP
CASE GP-FAN CLUTCH
437-1187 CASE GP-FAN CLUTCH
437-1187 CASE GP-FAN CLUTCH
S/N DGE1-UP; KCN1-UP
PART OF 350-5637 DRIVE GP-FAN
AN ATTACHMENT
CLUTCH GP-FAN
437-1186 CLUTCH GP-FAN
437-1186 CLUTCH GP-FAN
S/N DGE1-UP; KCN1-UP
PART OF 350-5637 DRIVE GP-FAN
AN ATTACHMENT
COMPRESSOR GP-REFRIGERANT
MOUNTING GP-ALTERNATOR & COMPR
348-8113 MOUNTING GP-ALTERNATOR & COMPR
348-8113 MOUNTING GP-ALTERNATOR & COMPR
S/N TXM1-UP; M4X1-UP
RH
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
FOR USE WITH PAD MOUNT ALTERNATOR AND REFRIGERANT COMPRESSOR
CRANKSHAFT GP
CRANKSHAFT GP
361-5593 CRANKSHAFT GP
361-5593 CRANKSHAFT GP
S/N TXM1-UP; M4X1-UP
PART OF 358-6892, 521-5943 ENGINE AR-CORE
SEAL GP-CRANKSHAFT
116-1091 SEAL GP-CRANKSHAFT
116-1091 SEAL GP-CRANKSHAFT
S/N TXM1-UP; M4X1-UP
REAR
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
SEAL GP-CRANKSHAFT
227-0838 SEAL GP-CRANKSHAFT
227-0838 SEAL GP-CRANKSHAFT -REAR
S/N TXM6187-UP
COUNTER CLOCKWISE ROTATION
PART OF 252-6255 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
252-6255 SEAL GP-CRANKSHAFT
252-6255 SEAL GP-CRANKSHAFT
S/N TXM6187-UP
PART OF 422-5494 ENGINE AR-COMPLETE
FOR USE WITH WET FLYWHEEL HOUSING
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
347-1267 COVER GP-CYLINDER BLOCK
347-1267 COVER GP-CYLINDER BLOCK
S/N TXM1-UP; M4X1-UP
PROVIDES COVERS FOR THE ENGINE OIL PUMP MANIFOLD WHEN NOT REQUIRED FOR OIL FILLERS
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
CYLINDER BLOCK AS
361-4766 CYLINDER BLOCK AS
361-4766 CYLINDER BLOCK AS
S/N TXM1-UP; M4X1-UP
PART OF 361-4767 CYLINDER BLOCK AS
CYLINDER BLOCK AS
361-4767 CYLINDER BLOCK AS
361-4767 CYLINDER BLOCK AS
S/N TXM1-UP; M4X1-UP
PART OF 517-1983 CYLINDER BLOCK AS
CYLINDER BLOCK AS
517-1983 CYLINDER BLOCK AS
517-1983 CYLINDER BLOCK AS
S/N TXM1-UP; M4X1-UP
PART OF 361-5592 CYLINDER BLOCK GP
CYLINDER BLOCK GP
361-5592 CYLINDER BLOCK GP
361-5592 CYLINDER BLOCK GP
S/N TXM1-UP; M4X1-UP
PART OF 358-6892, 521-5943 ENGINE AR-CORE
PLUG GP-CYLINDER BLOCK
117-0165 PLUG GP-CYLINDER BLOCK
117-0165 PLUG GP-CYLINDER BLOCK -OIL GALLERY, END
S/N TXM1-UP; M4X1-UP
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
PLUG GP-CYLINDER BLOCK
223-3875 PLUG GP-CYLINDER BLOCK
223-3875 PLUG GP-CYLINDER BLOCK
S/N TXM1-UP; M4X1-UP
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
PLUG GP-CYLINDER BLOCK
227-9545 PLUG GP-CYLINDER BLOCK
227-9545 PLUG GP-CYLINDER BLOCK -OIL GALLERY, RH
S/N TXM1-UP; M4X1-UP
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
PLUG GP-CYLINDER BLOCK
398-6932 PLUG GP-CYLINDER BLOCK
398-6932 PLUG GP-CYLINDER BLOCK
S/N TXM1-UP
PROVIDES A PLUG FOR PORT ON LH SIDE FRONT OF BLOCK
PART OF 417-2599, 422-5494 ENGINE AR-COMPLETE
CANNOT BE USED WITH FILTER GP-FUMES WITH LH FRONT OCV DRAIN LINE, GAUGE GP-OIL LEVEL WITH LH FRONT TUBE AS-GAUGE
PLUG GP-ENGINE
269-6164 PLUG GP-ENGINE
269-6164 PLUG GP-ENGINE
S/N TXM1-UP; M4X1-UP
PART OF 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
PLUG GP-ENGINE
349-9354 PLUG GP-ENGINE
349-9354 PLUG GP-ENGINE
S/N TXM1-UP; M4X1-UP
PART OF 342-7863 ENGINE AR-COMPLETE
CYLINDER HEAD GP
BRACKET GP-SUPPORT
345-6679 BRACKET GP-SUPPORT
345-6679 BRACKET GP-SUPPORT
S/N TXM1-UP; M4X1-UP
AIR COOLED. PROVIDES A BRACKET THE SECURES A 40 PIN INTERFACE
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
CYLINDER HEAD AS
331-1981 CYLINDER HEAD AS
331-1981 CYLINDER HEAD AS
S/N TXM6187-UP; M4X1-UP
PART OF 331-2477 CYLINDER HEAD GP
CYLINDER HEAD AS
520-4380 CYLINDER HEAD AS
520-4380 CYLINDER HEAD AS
S/N TXM6772-UP
PART OF 521-3563 CYLINDER HEAD GP
CYLINDER HEAD AS
520-4381 CYLINDER HEAD AS
520-4381 CYLINDER HEAD AS
S/N TXM1-6771; M4X1-UP
PART OF 521-3561 CYLINDER HEAD GP
CYLINDER HEAD GP
331-2477 CYLINDER HEAD GP
331-2477 CYLINDER HEAD GP
S/N TXM6187-UP; M4X1-UP
PART OF 331-2478 CYLINDER HEAD GP
CYLINDER HEAD GP
331-2478 CYLINDER HEAD GP
331-2478 CYLINDER HEAD GP
S/N TXM1-UP; M4X1-UP
PART OF 358-6892 ENGINE AR-CORE
CYLINDER HEAD GP
331-2478 CYLINDER HEAD GP
331-2478 CYLINDER HEAD GP
S/N TXM1-6771; M4X1-UP
PART OF 358-6892 ENGINE AR-CORE
CYLINDER HEAD GP
486-6232 CYLINDER HEAD GP
486-6232 CYLINDER HEAD GP
S/N TXM1-UP
PART OF 521-5943 ENGINE AR-CORE
CYLINDER HEAD GP
521-3561 CYLINDER HEAD GP
521-3561 CYLINDER HEAD GP
S/N TXM1-6771; M4X1-UP
PART OF 331-2478 CYLINDER HEAD GP
CYLINDER HEAD GP
521-3563 CYLINDER HEAD GP
521-3563 CYLINDER HEAD GP
S/N TXM6772-UP
PART OF 486-6232 CYLINDER HEAD GP
FASTENER GP-CYLINDER HEAD
198-4963 FASTENER GP-CYLINDER HEAD
198-4963 FASTENER GP-CYLINDER HEAD
S/N TXM1-UP; M4X1-UP
PART OF 331-2478, 486-6232 CYLINDER HEAD GP
PLUG GP-ENGINE
269-6164 PLUG GP-ENGINE
269-6164 PLUG GP-ENGINE
S/N TXM1-UP; M4X1-UP
PART OF 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
PLUG GP-ENGINE
349-9354 PLUG GP-ENGINE
349-9354 PLUG GP-ENGINE
S/N TXM1-UP; M4X1-UP
PART OF 342-7863 ENGINE AR-COMPLETE
DAMPER GP
DAMPER GP
117-2766 DAMPER GP
117-2766 DAMPER GP
S/N TXM1-UP; M4X1-UP
PROVIDES A VISCONIC DAMPER, ADAPTER AND FASTENING HARDWARE TO ATTACH THE DAMPER TO THE ADAPTER.
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
DRIVE GP-FAN
CASE GP-FAN CLUTCH
437-1187 CASE GP-FAN CLUTCH
437-1187 CASE GP-FAN CLUTCH
S/N DGE1-UP; KCN1-UP
PART OF 350-5637 DRIVE GP-FAN
AN ATTACHMENT
CLUTCH GP-FAN
437-1186 CLUTCH GP-FAN
437-1186 CLUTCH GP-FAN
S/N DGE1-UP; KCN1-UP
PART OF 350-5637 DRIVE GP-FAN
AN ATTACHMENT
DRIVE GP-FAN
348-8124 DRIVE GP-FAN
348-8124 DRIVE GP-FAN -BELT
S/N DGE1-UP; KCN1-UP
PART OF 348-8125 DRIVE GP-FAN
AN ATTACHMENT
DRIVE GP-FAN
348-8125 DRIVE GP-FAN
348-8125 DRIVE GP-FAN -BELT
S/N DGE1-UP; KCN1-UP
PART OF 305-7690 FAN AR-SUCTION
AN ATTACHMENT
DRIVE GP-FAN
350-5637 DRIVE GP-FAN
350-5637 DRIVE GP-FAN
S/N DGE1-UP; KCN1-UP
PART OF 352-0681 FAN GP-SUCTION
Type 1
AN ATTACHMENT
DRIVE GP-FAN
350-5637 DRIVE GP-FAN
350-5637 DRIVE GP-FAN
S/N DGE1-UP; KCN1-UP
PART OF 352-0681 FAN GP-SUCTION
Type 2
AN ATTACHMENT
DRIVE GP-FAN
548-4356 DRIVE GP-FAN
548-4356 DRIVE GP-FAN
S/N DGE1-UP; KCN1-UP
PART OF 493-7658 FAN AR-VARIABLE
MOUNTING GP-FAN DRIVE
219-7440 MOUNTING GP-FAN DRIVE
219-7440 MOUNTING GP-FAN DRIVE
S/N TXM1-UP; M4X1-UP
52-MM
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
MOUNTING GP-FAN DRIVE
348-8118 MOUNTING GP-FAN DRIVE
348-8118 MOUNTING GP-FAN DRIVE
S/N TXM1-UP; M4X1-UP
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
PULLEY GP-FAN
324-4362 PULLEY GP-FAN
324-4362 PULLEY GP-FAN
S/N DGE1-UP; KCN1-UP
PART OF 326-3897 FAN AR-VARIABLE
AN ATTACHMENT
PULLEY GP-FAN
324-4363 PULLEY GP-FAN
324-4363 PULLEY GP-FAN
S/N DGE1-UP; KCN1-UP
PART OF 305-7689 FAN AR-VARIABLE
AN ATTACHMENT
ENGINE GP
324-4336 INSTALLATION AR-ENG & CEM MOD
324-4336 INSTALLATION AR-ENG & CEM MOD
S/N DGE1-UP; KCN1-UP
PART OF 331-7816, 331-7916 COMMON AR
470-3351 KIT-ENGINE GASKET
470-3351 KIT-ENGINE GASKET -REAR STRUCTURE
S/N TXM1-UP; M4X1-UP
FIELD INSTALLATION
473-2194 KIT-ENGINE GASKET
473-2194 KIT-ENGINE GASKET -REAR STRUCTURE
S/N DGE1-UP; KCN1-UP
KIT CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET.
FOR USE WITH @@@@@422-5494@@@@@, @@@@@365-3524@@@@@
FIELD INSTALLATION
473-2197 KIT-ENGINE GASKET
473-2197 KIT-ENGINE GASKET
S/N DGE1-UP; KCN1-UP
KIT CONTAINS GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES
FOR USE WITH @@@@@422-5494@@@@@, @@@@@365-3524@@@@@
FIELD INSTALLATION
473-4009 KIT-ENGINE GASKET
473-4009 KIT-ENGINE GASKET
S/N DGE1-UP; KCN1-UP
KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES
FOR USE WITH @@@@@365-3524@@@@@
FIELD INSTALLATION
FLYWHEEL GP
FLYWHEEL GP
319-8165 FLYWHEEL GP
319-8165 FLYWHEEL GP
S/N TXM1-6730; M4X1-UP
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
FLYWHEEL GP
319-8165 FLYWHEEL GP
319-8165 FLYWHEEL GP
S/N TXM6731-UP; M4X1-UP
PART OF 365-3524, 417-2599 ENGINE AR-COMPLETE
GEAR GP
GEAR GP-FRONT
361-5599 GEAR GP-FRONT
361-5599 GEAR GP-FRONT
S/N TXM1-UP; M4X1-UP
PART OF 358-6892, 521-5943 ENGINE AR-CORE
HOUSING GP-FRONT
361-4680 HOUSING GP-FRONT
361-4680 HOUSING GP-FRONT
S/N TXM1-UP; M4X1-UP
ALUMINUM FRONT HOUSING FOR INDUSTRIAL USE
PART OF 342-7863, 365-3524, 422-5494 ENGINE AR-COMPLETE
Type 2
FOR USE WITH REDUCED BACKLASH GEAR TRAIN
HOUSING GP-FRONT
361-4680 HOUSING GP-FRONT
361-4680 HOUSING GP-FRONT
S/N TXM1-UP; M4X1-UP
ALUMINUM FRONT HOUSING FOR INDUSTRIAL USE
PART OF 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
Type 1
FOR USE WITH REDUCED BACKLASH GEAR TRAIN
HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
127-5728 COVER GP-FLYWHEEL HOUSING
127-5728 COVER GP-FLYWHEEL HOUSING
S/N TXM1-UP; M4X1-UP
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
HOUSING GP-FLYWHEEL
344-2905 HOUSING GP-FLYWHEEL
344-2905 HOUSING GP-FLYWHEEL
S/N TXM1-UP; M4X1-UP
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
HOUSING GP-FRONT
BRACKET GP-SUPPORT
345-6679 BRACKET GP-SUPPORT
345-6679 BRACKET GP-SUPPORT
S/N TXM1-UP; M4X1-UP
AIR COOLED. PROVIDES A BRACKET THE SECURES A 40 PIN INTERFACE
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
COVER GP-FRONT HOUSING
227-2574 COVER GP-FRONT HOUSING
227-2574 COVER GP-FRONT HOUSING
S/N TXM1-UP; M4X1-UP
PROVIDES COVER WHEN AIR COMPRESSOR IS NOT USED
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
COVER GP-FRONT HOUSING
290-7280 COVER GP-FRONT HOUSING
290-7280 COVER GP-FRONT HOUSING
S/N TXM1-UP; M4X1-UP
PROVIDES A COVER GP FOR USE WHEN NO OIL FILLER IS SERVICED ON THE FRONT LEFT SIDE OF ENGINE
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
GEAR GP-FRONT
361-5599 GEAR GP-FRONT
361-5599 GEAR GP-FRONT
S/N TXM1-UP; M4X1-UP
PART OF 358-6892, 521-5943 ENGINE AR-CORE
HOUSING GP-FRONT
361-4680 HOUSING GP-FRONT
361-4680 HOUSING GP-FRONT
S/N TXM1-UP; M4X1-UP
ALUMINUM FRONT HOUSING FOR INDUSTRIAL USE
PART OF 342-7863, 365-3524, 422-5494 ENGINE AR-COMPLETE
Type 2
FOR USE WITH REDUCED BACKLASH GEAR TRAIN
HOUSING GP-FRONT
361-4680 HOUSING GP-FRONT
361-4680 HOUSING GP-FRONT
S/N TXM1-UP; M4X1-UP
ALUMINUM FRONT HOUSING FOR INDUSTRIAL USE
PART OF 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
Type 1
FOR USE WITH REDUCED BACKLASH GEAR TRAIN
473-2192 KIT-FRONT COVER GASKET
473-2192 KIT-FRONT COVER GASKET
S/N DGE1-UP; KCN1-UP
KIT CONTAINS THE GASKETS, SEALS & BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@365-3524@@@@@, @@@@@422-5494@@@@@
FIELD INSTALLATION
LIFTING GP-ENGINE
LIFTING GP-ENGINE
224-0880 LIFTING GP-ENGINE
224-0880 LIFTING GP-ENGINE
S/N TXM1-UP; M4X1-UP
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR & COMPR
348-8113 MOUNTING GP-ALTERNATOR & COMPR
348-8113 MOUNTING GP-ALTERNATOR & COMPR
S/N TXM1-UP; M4X1-UP
RH
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
FOR USE WITH PAD MOUNT ALTERNATOR AND REFRIGERANT COMPRESSOR
MOUNTING GP-ENGINE
MOUNTING GP-ENGINE
324-4340 MOUNTING GP-ENGINE
324-4340 MOUNTING GP-ENGINE
S/N DGE1-UP; KCN1-UP
PART OF 324-4338 INSTALLATION AR-ENGINE
SUPPORT GP-ENGINE
348-9306 SUPPORT GP-ENGINE
348-9306 SUPPORT GP-ENGINE -FRONT
S/N TXM1-UP; M4X1-UP
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
PAN GP-OIL
DRAIN GP-ENGINE OIL
324-4341 DRAIN GP-ENGINE OIL
324-4341 DRAIN GP-ENGINE OIL
S/N DGE1-UP; KCN1-UP
PART OF 324-4338 INSTALLATION AR-ENGINE
DRAIN GP-ENGINE OIL
339-6961 DRAIN GP-ENGINE OIL
339-6961 DRAIN GP-ENGINE OIL
S/N DGE1-UP; KCN1-UP
PART OF 344-0830 OIL CHANGE GP-HIGH SPEED
AN ATTACHMENT
PAN GP-OIL
350-1951 PAN GP-OIL
350-1951 PAN GP-OIL -REAR SUMP
S/N TXM1-UP; M4X1-UP
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
FOR USE WITH ENGINES WITHOUT THE HYBRID STIFFENER PLATE
PISTON & ROD GP
PISTON & ROD GP
384-4314 PISTON & ROD GP
384-4314 PISTON & ROD GP
S/N TXM1-UP; M4X1-UP
17:1 COMPRESSION RATIO
PART OF 358-6892, 521-5943 ENGINE AR-CORE
PULLEY GP
PULLEY GP-CRANKSHAFT
329-7981 PULLEY GP-CRANKSHAFT
329-7981 PULLEY GP-CRANKSHAFT
S/N TXM1-UP; M4X1-UP
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
PULLEY GP-FAN
324-4362 PULLEY GP-FAN
324-4362 PULLEY GP-FAN
S/N DGE1-UP; KCN1-UP
PART OF 326-3897 FAN AR-VARIABLE
AN ATTACHMENT
PULLEY GP-FAN
324-4363 PULLEY GP-FAN
324-4363 PULLEY GP-FAN
S/N DGE1-UP; KCN1-UP
PART OF 305-7689 FAN AR-VARIABLE
AN ATTACHMENT
SERPENTINE/V-BELTS
BELT GP-SERPENTINE
324-4482 BELT GP-SERPENTINE
324-4482 BELT GP-SERPENTINE
S/N DGE1-UP; KCN1-UP
PART OF 305-7690 FAN AR-SUCTION
AN ATTACHMENT
BELT GP-SERPENTINE
350-2823 BELT GP-SERPENTINE
350-2823 BELT GP-SERPENTINE
S/N TXM1-UP; M4X1-UP
PROVIDES AN 8-RIB POLY-VEE BELT THAT IS 2430-MM IN LENGTH
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
VALVE MECHANISM GP
BASE GP-VALVE COVER
332-3705 BASE GP-VALVE COVER
332-3705 BASE GP-VALVE COVER
S/N TXM1-UP; M4X1-UP
PART OF 346-5480 BASE GP-VALVE COVER
BASE GP-VALVE COVER
346-5480 BASE GP-VALVE COVER
346-5480 BASE GP-VALVE COVER
S/N TXM1-UP; M4X1-UP
PART OF 358-6892, 521-5943 ENGINE AR-CORE
COVER GP-VALVE MECHANISM
346-9056 COVER GP-VALVE MECHANISM
346-9056 COVER GP-VALVE MECHANISM
S/N TXM1-UP; M4X1-UP
TO PROVIDE A COVER GROUP WITH OIL FILLER
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
FOR USE WITH VEHICULAR ENGINE APPLICATIONS WHICH REQUIRE REAR OIL FILLER LOCATION IN VALVE COVER
LIFTER GP-VALVE
237-4376 LIFTER GP-VALVE
237-4376 LIFTER GP-VALVE -MECHANISM
S/N TXM1-UP; M4X1-UP
PART OF 326-1959 VALVE MECHANISM GP
MOUNTING GP-VALVE MECHANISM
229-8084 MOUNTING GP-VALVE MECHANISM
229-8084 MOUNTING GP-VALVE MECHANISM
S/N TXM1-UP; M4X1-UP
NON-VARIABLE VALVE ACTUATOR
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE
FOR USE WITH NON-VARIABLE VALVE ACTUATOR ENGINES
ROCKER ARM GP
261-2294 ROCKER ARM GP
261-2294 ROCKER ARM GP -EXHAUST
S/N TXM1-UP; M4X1-UP
PART OF 396-4110, 444-1211, 458-2977 ROCKER ARM GP
ROCKER ARM GP
322-5762 ROCKER ARM GP
322-5762 ROCKER ARM GP
S/N TXM1-UP; M4X1-UP
PART OF 396-4110 ROCKER ARM GP
ROCKER ARM GP
385-4639 ROCKER ARM GP
385-4639 ROCKER ARM GP -INLET
S/N TXM1-UP; M4X1-UP
PART OF 396-4110, 444-1211, 458-2977 ROCKER ARM GP
ROCKER ARM GP
396-4110 ROCKER ARM GP
396-4110 ROCKER ARM GP
S/N TXM1-5383; M4X1-UP
PART OF 326-1959 VALVE MECHANISM GP
ROCKER ARM GP
444-1211 ROCKER ARM GP
444-1211 ROCKER ARM GP
S/N TXM5384-UP; M4X1-UP
PART OF 326-1959 VALVE MECHANISM GP
ROCKER ARM GP
444-1797 ROCKER ARM GP
444-1797 ROCKER ARM GP
S/N TXM5384-UP; M4X1-UP
PART OF 444-1211 ROCKER ARM GP
ROCKER ARM GP
458-2976 ROCKER ARM GP
458-2976 ROCKER ARM GP
S/N TXM6187-UP; M4X1-UP
PART OF 458-2977 ROCKER ARM GP
ROCKER ARM GP
458-2977 ROCKER ARM GP
458-2977 ROCKER ARM GP
S/N TXM1-UP; M4X1-UP
PART OF 326-1959 VALVE MECHANISM GP
VALVE MECHANISM GP
326-1959 VALVE MECHANISM GP
326-1959 VALVE MECHANISM GP
S/N TXM1-UP; M4X1-UP
PART OF 358-6892 ENGINE AR-CORE
VALVE MECHANISM GP
326-1959 VALVE MECHANISM GP
326-1959 VALVE MECHANISM GP
S/N TXM1-5383; M4X1-UP
PART OF 358-6892 ENGINE AR-CORE
VALVE MECHANISM GP
326-1959 VALVE MECHANISM GP
326-1959 VALVE MECHANISM GP
S/N TXM5384-UP; M4X1-UP
PART OF 358-6892 ENGINE AR-CORE
VALVE MECHANISM GP
326-1959 VALVE MECHANISM GP
326-1959 VALVE MECHANISM GP
S/N TXM1-UP; M4X1-UP
PART OF 358-6892, 521-5943 ENGINE AR-CORE
COVER GP-ENGINE
473-2192 KIT-FRONT COVER GASKET
473-2192 KIT-FRONT COVER GASKET
S/N DGE1-UP; KCN1-UP
KIT CONTAINS THE GASKETS, SEALS & BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@365-3524@@@@@, @@@@@422-5494@@@@@
FIELD INSTALLATION
BRACKET GP-ENGINE
BRACKET GP-MOUNTING
333-4161 BRACKET GP-MOUNTING
333-4161 BRACKET GP-MOUNTING
S/N DGE1-UP; KCN1-UP
PART OF 353-2046 CAB GP
AN ATTACHMENT

Information:

(For parts list, see above)

Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
349E Excavator
Disassembly and Assembly
Belt Tensioner - Remove and Install
C13
Engines for Caterpillar Built Machines
Systems Operation
Compression Brake
C13 Engines for Caterpillar Built Machines
Testing and Adjusting
Compression Brake Lash - Adjust
C13 Engines for Caterpillar Built Machines
Troubleshooting
Retarder - Test
C13, C15, and C18 Tier 4 Interim Engines
Engine News
New Camshafts Are Used for Certain C27 and C32 Commercial Engines {1210}
2014/05/20
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft - Remove
C13
Engines for Caterpillar Built Machines
Camshaft - Install
C13
Engines for Caterpillar Built Machines
Camshaft Gear - Remove and Install
C13
Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C13
Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C13
Engines for Caterpillar Built Machines
Service Magazine
Improved Camshafts Are Now Used on Certain C27 and C32 Machines {1210}
2014/05/30
Improved Reman Camshafts Are Now Used on Certain C27 and C32 Machines {1209, 1210}
2014/05/30
Cat<SUP>&reg;</SUP> Reman Has Added Valve Actuators, Valve Lifters, Rocker Arms, and Camshafts for Certain Machine Engines {1121, 1130, 1209, 1210}
2014/09/05
Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
349E Excavator
Specifications
Refrigerant Compressor
349E Excavator Machine System Specifications
Disassembly and Assembly
Refrigerant Compressor - Remove and Install
C13
Engines for Caterpillar Built Machines
Engine News
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Engines {1202}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Engines {1202}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REAR CRANKSHAFT SEALS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REAR CRANKSHAFT SEALS FROM DEALER PARTS STOCK
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REAR CRANKSHAFT SEALS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REAR CRANKSHAFT SEALS FROM DEALER PARTS STOCK
Service Letter-Asia
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Information Release Memo
Cat Reman Announces Additional Upgrade-To-New Crankshafts for Cat&reg; Machine Applications
Cat Reman Announces Additional Upgrade-To-New Crankshafts for Cat® Machine Applications
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REAR CRANKSHAFT SEALS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REAR CRANKSHAFT SEALS FROM DEALER PARTS STOCK
Testing and Adjusting
Excessive Bearing Wear - Inspect
C13 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Crankshaft Rear Seal - Remove and Install
C13
Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove and Install
C13
Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C13
Engines for Caterpillar Built Machines
Crankshaft - Install
C13
Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C13
Engines for Caterpillar Built Machines
Crankshaft - Remove
C13
Engines for Caterpillar Built Machines
Bearing Clearance - Check
C13
Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove and Install
349E Excavator and 349E MHPU
Mobile Hydraulic Power Unit C13 Engine Supplement
Service Magazine
A New Rear Engine Crankshaft Seal Is Now Used on Certain Excavators Equipped With C13 Engines {1161}
2014/03/31
A New Engine Front Crankshaft Seal Is Now Used On Certain Machine Applications Equipped With C13 Engines {1160}
2014/04/15
Cat<SUP>&reg;</SUP> Reman Now Offers Upgrade to New Crankshafts for Certain Machine Engines {1202}
2014/10/01
Updated Reuse And Salvage Guidelines for C27 and C32 Machine Engines {1202, 1218}
2015/04/10
Improved Crankshaft Rear Seals Are Used on Certain C13 Machine Engines {1161}
2015/09/03
Improved Crankshafts are Now Used on Certain Cat<SUP>&reg;</SUP> Products {1202}
Improved Crankshafts are Now Used on Certain Cat® Products {1202}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Machine Engines {1202}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Machine Engines {1202}
Engine News
A New Liner O-Ring Seal is Available for Certain C10 Through C13 Engines {1201, 7555}
2013/12/23
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Tool Operating Manual
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
C13 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
C13 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C13 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C13 Engines for Caterpillar Built Machines
Troubleshooting
Crankcase Pressure Is High
C13, C15, and C18 Tier 4 Interim Engines
Crankcase Pressure Is Low
C13, C15, and C18 Tier 4 Interim Engines
Cylinder Is Noisy
C13, C15, and C18 Tier 4 Interim Engines
Disassembly and Assembly
Camshaft Bearings - Remove
C13
Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C13
Engines for Caterpillar Built Machines
Cylinder Liner - Remove
C13
Engines for Caterpillar Built Machines
Cylinder Liner - Install
C13
Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C13
Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C13
Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C13
Engines for Caterpillar Built Machines
Bearing Clearance - Check
C13
Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Engine Valve Rotators - Inspect
349E Excavator
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
C13 Valve Stem Seals Installed Incorrectly{1100, 1101, 7555}
C13 Valve Stem Seals Installed Incorrectly{1100, 1101, 7555}
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Electronic Unit Injector Sleeve - Remove and Install
C13
Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
C13
Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
C13
Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Springs - Remove and Install
C13
Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
C13
Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
C13
Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C13
Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C13
Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C13
Engines for Caterpillar Built Machines
Cylinder Head - Remove and Install
C13
Engines for Caterpillar Built Machines
Service Magazine
A New Installation Process Is Used for Valve Stem Seals in Certain C13 Machine Engines {1100, 1104, 1105}
2014/03/12
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C13
Engines for Caterpillar Built Machines
Crankshaft Vibration Damper and Pulley - Remove and Install
349E Excavator and 349E MHPU
Mobile Hydraulic Power Unit C13 Engine Supplement
Accessory Drive - Remove and Install - Bracket and Pulleys
C13
Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
349E Excavator
Specifications
Fan Drive
349E Excavator Machine System Specifications
Fan Drive
349E Excavator Machine System Specifications
Disassembly and Assembly
Fan Drive - Remove and Install - Hydraulic Fan, Variable
349E Excavator and 349E MHPU
Mobile Hydraulic Power Unit C13 Engine Supplement
Fan Drive - Remove and Install - Direct Drive
349E Excavator and 349E MHPU
Mobile Hydraulic Power Unit C13 Engine Supplement
Fan Drive - Disassemble - Direct Drive
349E Excavator and 349E MHPU
Mobile Hydraulic Power Unit C13 Engine Supplement
Fan Drive - Assemble - Direct Drive
349E Excavator and 349E MHPU
Mobile Hydraulic Power Unit C13 Engine Supplement
Fan Drive - Disassemble - Hydraulic Fan Drive
349E Excavator and 349E MHPU
Mobile Hydraulic Power Unit C13 Engine Supplement
Fan Drive - Assemble - Hydraulic Fan Drive
349E Excavator and 349E MHPU
Mobile Hydraulic Power Unit C13 Engine Supplement
Service Magazine
A New Fan Drive Bracket Assembly is Now Used for Certain Hydraulic Excavator Engines {1359}
A New Fan Drive Bracket Assembly is Now Used for Certain Hydraulic Excavator Engines {1359}
Special Instruction
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel - Remove and Install
C13
Engines for Caterpillar Built Machines
Service Magazine
New Flywheel Assemblies Are Now Used on Certain Motor Graders and Excavators {1156}
2013/03/28
A New Flywheel Gear Ring is Now Used for the Flywheel Assembly on Certain Hydraulic Excavator Engines {1156}
A New Flywheel Gear Ring is Now Used for the Flywheel Assembly on Certain Hydraulic Excavator Engines {1156}
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Gear Group (Front) - Remove and Install
C13
Engines for Caterpillar Built Machines
Service Magazine
New Engine Front Cover Used On Certain Applications Equipped With C13 Machine Engines {1151, 1162, 1206}
2013/11/14
Testing and Adjusting
Flywheel Housing - Inspect
C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel Housing - Remove and Install
C13
Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Front Cover - Remove and Install
C13
Engines for Caterpillar Built Machines
Housing (Front) - Remove and Install
C13
Engines for Caterpillar Built Machines
Service Magazine
New Engine Front Cover Used On Certain Applications Equipped With C13 Machine Engines {1151, 1162, 1206}
2013/11/14
Specifications
Engine Mounting
349E Excavator Machine System Specifications
Disassembly and Assembly
Engine Front Mount - Remove and Install
349E Excavator and 349E MHPU
Mobile Hydraulic Power Unit C13 Engine Supplement
Engine Rear Mount - Remove and Install
349E Excavator and 349E MHPU
Mobile Hydraulic Power Unit C13 Engine Supplement
Operation and Maintenance Manual
Engine Oil Level - Check
349E Excavator
Engine Oil and Filter - Change
349E Excavator
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Engine Oil Pan - Remove and Install
C13
Engines for Caterpillar Built Machines
Oil Pan - Remove and Install
349E Excavator and 349E MHPU
Mobile Hydraulic Power Unit C13 Engine Supplement
Special Instruction
Correct Combinations of Connecting Rods Allowed in Remanufactured Cylinder Packs for Certain C13 Engines{1218, 1225, 1239}
Correct Combinations of Connecting Rods Allowed in Remanufactured Cylinder Packs for Certain C13 Engines{1218, 1225, 1239}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
System Check after an NOx Reduction System (NRS) Cooler Failure for C9.3 through C18 Tier 4 Engines {1000, 1075, 108C, 108F}
System Check after an NOx Reduction System (NRS) Cooler Failure for C9.3 through C18 Tier 4 Engines {1000, 1075, 108C, 108F}
Piston Height Check Procedure for C9.3 through C18 Tier 4 Engines {1000, 108C, 1214}
Piston Height Check Procedure for C9.3 through C18 Tier 4 Engines {1000, 108C, 1214}
Technical Information Bulletin
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Compression - Test
C13 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
C13 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C13 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Inspect
C13 Engines for Caterpillar Built Machines
Engine Crankcase Pressure (Blowby) - Test
C13 Engines for Caterpillar Built Machines
Piston Ring Groove - Inspect
C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Piston Cooling Jets - Remove and Install
C13
Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
C13
Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
C13
Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
C13
Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
C13
Engines for Caterpillar Built Machines
Connecting Rod Bearings - Remove
C13
Engines for Caterpillar Built Machines
Connecting Rod Bearings - Install
C13
Engines for Caterpillar Built Machines
Bearing Clearance - Check
C13
Engines for Caterpillar Built Machines
Service Magazine
Updated Reuse And Salvage Guidelines for C27 and C32 Machine Engines {1202, 1218}
2015/04/10
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C13
Engines for Caterpillar Built Machines
Belt Tightener - Remove and Install - Fan Drive
349E Excavator and 349E MHPU
Mobile Hydraulic Power Unit C13 Engine Supplement
Belt Tightener - Remove and Install - Alternator and Refrigerant Compressor
349E Excavator and 349E MHPU
Mobile Hydraulic Power Unit C13 Engine Supplement
Crankshaft Vibration Damper and Pulley - Remove and Install
349E Excavator and 349E MHPU
Mobile Hydraulic Power Unit C13 Engine Supplement
Technical Information Bulletin
C13 Tier 4 Final Commercial and Machine Engines with an E360 (3) Low Engine Oil Pressure Code{1304}
C13 Tier 4 Final Commercial and Machine Engines with an E360 (3) Low Engine Oil Pressure Code{1304}
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Service Magazine
An Improved Oil Pump is Now Used on Certain C13 Machine Engines {1304}
An Improved Oil Pump is Now Used on Certain C13 Machine Engines {1304}
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Piston Height Check Procedure for C9.3 through C18 Tier 4 Engines {1000, 108C, 1214}
Piston Height Check Procedure for C9.3 through C18 Tier 4 Engines {1000, 108C, 1214}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
NEHS0733: <NOBR>159-9404</NOBR> Counterbore Tool Group For C10 through C13 {0705}
NEHS0733: 159-9404 Counterbore Tool Group For C10 through C13 {0705}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
349E Excavator
Engine News
New Rocker Arms Are Used on C27 and C32 Commercial Engines {1123}
2014/05/07
Correct Valve Rocker Arm Usage on C27 and C32 Engines {1123}
2015/09/04
Operation and Maintenance Manual
Engine Valve Rotators - Inspect
349E Excavator
Engine Valve Lash and Fuel Injector Timing - Check
349E Excavator
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTOR ROCKER ARMS ON CERTAIN 16M 3 MOTOR GRADERS, 349E, AND 349F EXCAVATORS, 621H, 621K, 623H, 623K, 627H, AND 627K WHEEL TRACTOR-SCRAPER, 730C ARTICULATED TRUCKS, 980K, 980M, AND 982M WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTOR ROCKER ARMS ON CERTAIN 16M 3 MOTOR GRADERS, 349E, AND 349F EXCAVATORS, 621H, 621K, 623H, 623K, 627H, AND 627K WHEEL TRACTOR-SCRAPER, 730C ARTICULATED TRUCKS, 980K, 980M, AND 982M WHEEL LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTOR ROCKER ARMS ON CERTAIN 16M 3 MOTOR GRADERS, 349E, AND 349F EXCAVATORS, 621H, 621K, 623H, 623K, 627H, AND 627K WHEEL TRACTOR-SCRAPER, 730C ARTICULATED TRUCKS, 980K, 980M, AND 982M WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTOR ROCKER ARMS ON CERTAIN 16M 3 MOTOR GRADERS, 349E, AND 349F EXCAVATORS, 621H, 621K, 623H, 623K, 627H, AND 627K WHEEL TRACTOR-SCRAPER, 730C ARTICULATED TRUCKS, 980K, 980M, AND 982M WHEEL LOADERS
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTOR ROCKER ARMS ON CERTAIN 16M 3 MOTOR GRADERS, 349E, AND 349F EXCAVATORS, 621H, 621K, 623H, 623K, 627H, AND 627K WHEEL TRACTOR-SCRAPER, 730C ARTICULATED TRUCKS, 980K, 980M, AND 982M WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTOR ROCKER ARMS ON CERTAIN 16M 3 MOTOR GRADERS, 349E, AND 349F EXCAVATORS, 621H, 621K, 623H, 623K, 627H, AND 627K WHEEL TRACTOR-SCRAPER, 730C ARTICULATED TRUCKS, 980K, 980M, AND 982M WHEEL LOADERS
Testing and Adjusting
Finding Top Center Position for No. 1 Piston
C13 Engines for Caterpillar Built Machines
Engine Valve Lash - Inspect/Adjust
C13 Engines for Caterpillar Built Machines
Troubleshooting
Valve Rotator or Spring Lock Is Free
C13, C15, and C18 Tier 4 Interim Engines
Valve Lash Is Excessive
C13, C15, and C18 Tier 4 Interim Engines
Variable Valve Actuator - Test
C13, C15, and C18 Tier 4 Interim Engines
Variable Valve Actuator Response - Test
C13, C15, and C18 Tier 4 Interim Engines
Disassembly and Assembly
Valve Actuator (Variable) - Remove and Install
C13
Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
C13
Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
C13
Engines for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install
C13
Engines for Caterpillar Built Machines
Valve Mechanism Cover Base - Remove and Install
C13
Engines for Caterpillar Built Machines
Rocker Arm - Disassemble
C13
Engines for Caterpillar Built Machines
Rocker Arm - Assemble
C13
Engines for Caterpillar Built Machines
Lifter Group - Remove and Install
C13
Engines for Caterpillar Built Machines
Service Magazine
A New Rocker Arm Assembly Is Used on Certain Machines Equipped with C11 and C13 Engines {1123}
2012/10/03
An Improved Rocker Arm Assembly Is Used on C27 and C32 Machine Engines {1102, 1123}
2014/05/30
Improved Reman Camshafts Are Now Used on Certain C27 and C32 Machines {1209, 1210}
2014/05/30
An Improvement to the Open Crankcase Ventilation (OCV) Components for Extreme Cold Climates Is Now Available for Certain Machine Engines {1074, 1107}
2014/01/27
New Rocker Arms Are Used for Certain C27 and C32 Machine Engines {1102, 1123}
2014/05/30
New Fuel Injector Rocker Arms Are Used on Certain C13 Machine Engines {1123}
2014/12/11
Cat<SUP>&reg;</SUP> Reman Has Added Valve Actuators, Valve Lifters, Rocker Arms, and Camshafts for Certain Machine Engines {1121, 1130, 1209, 1210}
2014/09/05
New Guidelines for Valve Cover Base Threaded Insert on C27 and C32 Engines {1107, 1120}
2014/10/27
Correct Valve Rocker Arm Usage on C27 and C32 Machine Engines {1123}
2015/09/03
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}

Truck sale:

Caterpillar 349ELVG, Construction
333,500 
Caterpillar 349ELVG, Construction
- Crawler Excavators
THOMPSON TRACTOR CO., INC.
 
 
Caterpillar 349ELVG, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
France
Caterpillar 349ELVG, Construction
199,000 
Caterpillar 349ELVG, Construction
- Crawler Excavators
PATTEN INDUSTRIES, INC.
Caterpillar 349ELVG, Construction
210,000 
Caterpillar 349ELVG, Construction
- Crawler Excavators
PATTEN INDUSTRIES, INC.
 
 
Caterpillar 349ELVG, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
France
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.