117-0165 PLUG GP-CYLINDER BLOCK -OIL GALLERY, END S/N TXM1-UP; M4X1-UP PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE 349E L VG

BASIC ENGINE

CYLINDER BLOCK GP

0. 117-0165 PLUG GP-CY
1. 223-3875 PLUG GP-CY
2. 227-9545 PLUG GP-CY
3. 398-6932 PLUG GP-CY
4. 269-6164 PLUG GP-EN
5. 349-9354 PLUG GP-EN

PULLEY GP

6. 329-7981 PULLEY GP-

DRIVE GP-FAN

7. 324-4362 PULLEY GP-
8. 324-4363 PULLEY GP-

VALVE MECHANISM GP

9. 261-2294 ROCKER ARM
0. INFORMATION

EXCAVATOR 349E L VG EXCAVATOR DGE
349E L-VG Excavators DGE00001-UP (MACHINE) POWERED BY C13 Engine SEBP5614 349E L VG DGE (2011)

BASIC ENGINE

CYLINDER BLOCK GP

517-1983 CYLINDER BLOCK AS

361-5592 CYLINDER BLOCK GP

117-0165 PLUG GP-CYLINDER BLOCK

223-3875 PLUG GP-CYLINDER BLOCK

227-9545 PLUG GP-CYLINDER BLOCK

398-6932 PLUG GP-CYLINDER BLOCK

#SEBP56140140

117-0165: PLUG GP-CYLINDER BLOCK

PLUG GP-CYLINDER BLOCK

117-0165 PLUG GP-CYLINDER BLOCK -OIL GALLERY, END
S/N TXM1-UP; M4X1-UP
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE

i00490647 SEBP5614

1170165 PLUG GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	3B-0623	[1]	PLUG-CUP

#SEBP56140141

223-3875: PLUG GP-CYLINDER BLOCK

PLUG GP-CYLINDER BLOCK

223-3875 PLUG GP-CYLINDER BLOCK
S/N TXM1-UP; M4X1-UP
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE

i01839661 SEBP5614

2233875 PLUG GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	307-2671	[1]	PLUG AS
	9S-8002	[1]	PLUG (7/16-20-THD)
	214-7566	[1]	SEAL-O-RING

#SEBP56140142

227-9545: PLUG GP-CYLINDER BLOCK

PLUG GP-CYLINDER BLOCK

227-9545 PLUG GP-CYLINDER BLOCK -OIL GALLERY, RH
S/N TXM1-UP; M4X1-UP
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE

i01863078 SEBP5614

2279545 PLUG GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	183-3407	[2]	PLUG AS
			(EACH INCLUDES)
	9S-8004	[1]	PLUG (9/16-18-THD)
1A.	214-7568	[1]	SEAL-O-RING
2.	307-2673	[1]	PLUG AS
	9S-8005	[1]	PLUG (3/4-16-THD)
2A.	238-5080	[1]	SEAL-O-RING

#SEBP56140143

398-6932: PLUG GP-CYLINDER BLOCK

PLUG GP-CYLINDER BLOCK

398-6932 PLUG GP-CYLINDER BLOCK
S/N TXM1-UP
PROVIDES A PLUG FOR PORT ON LH SIDE FRONT OF BLOCK
PART OF 417-2599, 422-5494 ENGINE AR-COMPLETE
CANNOT BE USED WITH FILTER GP-FUMES WITH LH FRONT OCV DRAIN LINE, GAUGE GP-OIL LEVEL WITH LH FRONT TUBE AS-GAUGE

i04857671 SEBP5614

3986932 PLUG GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	209-7309	[1]	PLUG

#SEBP56140144

269-6164: PLUG GP-ENGINE

PLUG GP-ENGINE

269-6164 PLUG GP-ENGINE
S/N TXM1-UP; M4X1-UP
PART OF 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE

i02443220 SEBP5614

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	315-9859	[1]	PLUG AS
	9S-8008	[1]	PLUG (1-1/16-12-THD)
	238-5082	[1]	SEAL-O-RING
2.	353-5125	[1]	PLUG AS
	6V-3251	[1]	SEAL-O-RING
	9S-8006	[1]	PLUG (7/8-14-THD)
3.	353-5126	[1]	PLUG AS
	6V-6609	[1]	SEAL-O-RING
	9S-8005	[1]	PLUG (3/4-16-THD)

#SEBP56140145

349-9354: PLUG GP-ENGINE

PLUG GP-ENGINE

349-9354 PLUG GP-ENGINE
S/N TXM1-UP; M4X1-UP
PART OF 342-7863 ENGINE AR-COMPLETE

i04105774 SEBP5614

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	238-5082	[1]	SEAL-O-RING
2.	6V-6609	[1]	SEAL-O-RING
3.	9S-8005	[1]	PLUG (3/4-16-THD)
4.	9S-8008	[1]	PLUG (1-1/16-12-THD)

#SEBP56140146

329-7981: PULLEY GP-CRANKSHAFT

PULLEY GP-CRANKSHAFT

329-7981 PULLEY GP-CRANKSHAFT
S/N TXM1-UP; M4X1-UP
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE

i03908752 SEBP5614

3297981 PULLEY GP-CRANKSHAFT Parts scheme

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	207-8107	[1]	PULLEY (8-GROOVE)
2.	375-7693	[1]	ADAPTER
3.	326-9521	[1]	PULLEY (14-GROOVE)
4.	6V-8154 M	[6]	BOLT (M16X2X150-MM)
5.	9X-8268	[6]	WASHER (17.5X30X3.5-MM THK)
	M		METRIC PART

#SEBP56140147

324-4362: PULLEY GP-FAN

PULLEY GP-FAN

324-4362 PULLEY GP-FAN
S/N DGE1-UP; KCN1-UP
PART OF 326-3897 FAN AR-VARIABLE
AN ATTACHMENT

i04071029 SEBP5614

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	348-8114	[1]	PULLEY-FAN
2.	359-0188	[1]	BELT-SERPENTINE
3.	453-3451	[10]	WASHER-HARD (8.8X16X2-MM THK)
4.	453-3433 M	[10]	BOLT (M8X1.25X25-MM)
	M		METRIC PART

#SEBP56140148

324-4363: PULLEY GP-FAN

PULLEY GP-FAN

324-4363 PULLEY GP-FAN
S/N DGE1-UP; KCN1-UP
PART OF 305-7689 FAN AR-VARIABLE
AN ATTACHMENT

i04711456 SEBP5614

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	348-8115	[1]	PULLEY-FAN (14-GROOVE)
2.	359-0189	[1]	BELT-SERPENTINE
3.	8T-4224	[10]	WASHER-HARD (8.8X16X2-MM THK)
4.	8T-4908 M	[10]	BOLT (M8X1.25X25-MM)
	M		METRIC PART

#SEBP56140149

261-2294: ROCKER ARM GP

ROCKER ARM GP

261-2294 ROCKER ARM GP -EXHAUST
S/N TXM1-UP; M4X1-UP
PART OF 396-4110, 444-1211, 458-2977 ROCKER ARM GP

i02343189 SEBP5614

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	260-7524 M	[1]	SCREW-VALVE ADJUSTMENT (M10X1.5-THD)
2.	261-2293	[1]	ROCKER ARM AS (EXHAUST)
3.	2Y-5829 M	[1]	NUT (M10X1.5-THD)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

Information:

BASIC ENGINE

CYLINDER BLOCK GP

Engine News

A New Liner O-Ring Seal is Available for Certain C10 Through C13 Engines {1201, 7555}
2013/12/23

Special Instruction

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Tool Operating Manual

420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}

Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}

Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}

Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}

Testing and Adjusting

Cylinder Block - Inspect
C13 Engines for Caterpillar Built Machines

Cylinder Liner Projection - Inspect
C13 Engines for Caterpillar Built Machines

Excessive Bearing Wear - Inspect
C13 Engines for Caterpillar Built Machines

Main Bearings - Inspect
C13 Engines for Caterpillar Built Machines

Troubleshooting

Crankcase Pressure Is High
C13, C15, and C18 Tier 4 Interim Engines

Crankcase Pressure Is Low
C13, C15, and C18 Tier 4 Interim Engines

Cylinder Is Noisy
C13, C15, and C18 Tier 4 Interim Engines

Disassembly and Assembly

Camshaft Bearings - Remove
C13
Engines for Caterpillar Built Machines

Camshaft Bearings - Install
C13
Engines for Caterpillar Built Machines

Cylinder Liner - Remove
C13
Engines for Caterpillar Built Machines

Cylinder Liner - Install
C13
Engines for Caterpillar Built Machines

Piston Cooling Jets - Remove and Install
C13
Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Remove
C13
Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Install
C13
Engines for Caterpillar Built Machines

Bearing Clearance - Check
C13
Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog 349E L VG :

384-4314 PISTON & ROD GP

350-1951 PAN GP-OIL

229-8084 MOUNTING GP-VALVE MECHANISM

348-8118 MOUNTING GP-FAN DRIVE

219-7440 MOUNTING GP-FAN DRIVE

324-4340 MOUNTING GP-ENGINE

348-8113 MOUNTING GP-ALTERNATOR & COMPR

224-0880 LIFTING GP-ENGINE

223-3875 PLUG GP-CYLINDER BLOCK

227-9545 PLUG GP-CYLINDER BLOCK

398-6932 PLUG GP-CYLINDER BLOCK

269-6164 PLUG GP-ENGINE

349-9354 PLUG GP-ENGINE

329-7981 PULLEY GP-CRANKSHAFT

324-4362 PULLEY GP-FAN

324-4363 PULLEY GP-FAN

Truck sale:

333,500

Caterpillar 349ELVG, Construction
- Crawler Excavators
THOMPSON TRACTOR CO., INC.

Caterpillar 349ELVG, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
France

199,000

Caterpillar 349ELVG, Construction
- Crawler Excavators
PATTEN INDUSTRIES, INC.

210,000

Caterpillar 349ELVG, Construction
- Crawler Excavators
PATTEN INDUSTRIES, INC.

Caterpillar 349ELVG, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
France