234-5013 SENSOR GP-TEMPERATURE S/N TXM1-UP; M4X1-UP PART OF 343-8126 BASE GP-FUEL FILTER, 345-3846 SENSOR GP-ENGINE 349E L VG

ELECTRICAL AND STARTING SYSTEM

SENSOR GP

0. 234-5013 SENSOR GP-

STARTING AID GP

1. 324-4364 STARTING A

STARTING MOTOR GP

2. 349-6519 STARTING M
3. 349-6530 STARTING M
4. 352-8869 STARTING M
5. 352-8869 STARTING M
6. 494-6414 STARTING M

SWITCH GP

7. 357-3849 SWITCH & M
8. 7N-0719 SWITCH GP-
9. 357-3967 SWITCH GP-
0. INFORMATION

EXCAVATOR 349E L VG EXCAVATOR DGE
349E L-VG Excavators DGE00001-UP (MACHINE) POWERED BY C13 Engine SEBP5614 349E L VG DGE (2011)

ELECTRICAL AND STARTING SYSTEM

SENSOR GP

384-1836 SENSOR GP-SPEED

234-5012 SENSOR GP-TEMPERATURE

234-5013 SENSOR GP-TEMPERATURE

327-7474 GUARD GP-SENSOR

#SEBP56140470

234-5013: SENSOR GP-TEMPERATURE

SENSOR GP-TEMPERATURE

234-5013 SENSOR GP-TEMPERATURE
S/N TXM1-UP; M4X1-UP
PART OF 343-8126 BASE GP-FUEL FILTER, 345-3846 SENSOR GP-ENGINE

i02328190 SEBP5614

2345013 SENSOR GP-TEMPERATURE Parts scheme

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	256-6453	[1]	SENSOR-TEMPERATURE (2-PIN)
2.	238-5080	[1]	SEAL-O-RING

#SEBP56140471

324-4364: STARTING AID GP-ETHER

STARTING AID GP-ETHER

324-4364 STARTING AID GP-ETHER
S/N DGE1-UP; KCN1-UP
PART OF 360-6398, 360-6399, 382-7310, 382-7311 OPTION AR-REGIONAL
AN ATTACHMENT

i04060216 SEBP5614

3244364 STARTING AID GP-ETHER Parts scheme

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[1]	STRAP-CABLE
2.	7N-2059	[1]	CLAMP AS (CYLINDER)
3.	230-0917	[1]	FITTING AS
	236-4545	[1]	NUT-SLEEVE (5/16-24-THD)
4.	239-1134 Y	[1]	VALVE GP-ETHER STARTING (24-VOLT)
5.	351-3838	[1]	PLATE AS
6.	352-0399	[1]	ATOMIZER GP-ETHER
	236-4545	[1]	NUT-SLEEVE (5/16-24-THD)
7.	4P-7581	[1]	CLIP (LADDER)
8.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
9.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
10.	8T-4189 M	[4]	BOLT (M8X1.25X20-MM)
11.	8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
12.	174-9169 E		TUBE (73-CM)

	7N-0296 AF	[1]	CYLINDER AS-ETHER
			(MUST BE PROCURED LOCALLY FROM YOUR CATERPILLAR DEALER)
	A		NOT PART OF THIS GROUP
	E		ORDER BY THE CENTIMETER
	F		NOT SHOWN
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP56140472

349-6519: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

349-6519 STARTING MOTOR GP-ELECTRIC
S/N TXM6187-UP; M4X1-UP
24-VOLT
PART OF 352-8869 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@349-6530@@@@@

i04112529 SEBP5614

3496519 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7M-0326	[1]	CONNECTOR
2.	9H-3757	[2]	WASHER (0.516X1X0.094-IN THK)
3.	1S-7446	[3]	SCREW-MACHINE (8-32X0.437-IN)
4.	8C-9660	[3]	WASHER (4.6X7.9X0.8-MM THK)
5.	9S-2544	[9]	SCREW-HEX HEAD (8-32X11.13-MM)
6.	7M-0327	[1]	WASHER-THRUST (17.4X25.4X1.6-MM THK)
7.	3T-3418	[1]	FRAME AS-END
	3T-3423	[1]	CUP
	3T-3424	[1]	PLUG-FELT
	9G-4101	[1]	BUSHING-END
8.	3T-9525 Y	[1]	PLATE AS-BRUSH (STARTING MOTOR)
9.	1T-0808	[2]	WASHER (0.516X0.812X0.09-IN THK)
10.	3T-3422	[1]	WIRE AS
11.	2J-8163	[2]	SEAL-O-RING
12.	7X-3373	[1]	BOLT (5/16-18X0.88-IN)
13.	5J-5314	[5]	BOLT (5/16-18X1.5-IN)
14.	3L-3380	[1]	BUSHING-TERMINAL
15.	8C-3089	[1]	SEAL-O-RING
16.	4M-1853	[1]	LEVER AS-SHIFT
17.	5M-3034	[1]	LOCKNUT (5/16-24-THD)
18.	7L-2894	[4]	GASKET
19.	4M-1831	[4]	PLUG-LEVER HOUSING
20.	4M-1854	[1]	SHAFT-LEVER
21.	1H-1023	[1]	SEAL-O-RING
22.	2D-6392	[1]	SEAL-O-RING
23.	7T-3974	[1]	HOUSING AS-DRIVE
24.	6N-3826	[1]	DRIVE AS-MOTOR
25.	2H-3429	[1]	RING-RETAINING
26.	6V-1322	[4]	BOLT (1/4-20X0.375-IN)
27.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
28.	6N-3279	[1]	INSULATOR
29.	0S-1597	[13]	BOLT (1/4-28X1-IN)
30.	1M-9971	[1]	SPACER (0.835X1.72X0.188-IN THK)
31.	1H-2629	[3]	STRIP-INSULATION
32.	7M-0324	[1]	COIL AS-FIELD
33.	3R-8797	[12]	SCREW & WASHER AS (3/8-24X0.72-IN)
34.	7F-3488	[6]	SHOE-POLE
35.	7M-8651	[1]	ARMATURE AS
36.	7M-0325	[1]	INSULATOR
37.	3T-9524	[6]	BRUSH AS
38.	3N-3763	[1]	KIT-TERMINAL (STARTING MOTOR)
			(INCLUDES BUSHINGS & WASHER)
40.	3R-8801	[1]	CLAMP
41.	8F-1434	[2]	LOCKWASHER
42.	6V-8188	[6]	NUT (1/2-13-THD)
43.	7X-0562	[6]	WASHER-HARD (13.5X19X0.8-MM THK)
44.	4B-2049	[6]	NUT (10-32-THD)
45.	8T-0328	[10]	WASHER-HARD (5.5X10X1-MM THK)
46.	3T-9494	[6]	SPRING
47.	349-6255	[1]	HOUSING AS
48.	9G-4101	[1]	BUSHING-END
49.	3T-3424	[3]	PLUG-FELT
50.	3T-3423	[3]	CUP
51.	1M-9968	[1]	BUSHING
52.	2F-6678	[1]	SEAL-LIP TYPE
53.	4L-2729	[1]	WASHER (0.844X1.9X0.188-IN THK)
54.	4M-1896	[1]	BUSHING-TERMINAL
55.	045-4065	[4]	SCREW-MACHINE (10-32X0.75-IN)
56.	125-6535	[1]	COVER-STARTING MOTOR
57.	338-3453	[1]	SOLENOID AS-STARTING MOTOR (24-VOLT)
	3R-8801	[1]	CLAMP
58.	352-7994	[1]	KIT-SWITCH (RELAY, STARTER)
			(INCLUDES SWITCH AS, COVER, BOLT, ANCHOR, & CLAMP)
	Y		SEPARATE ILLUSTRATION

#SEBP56140473

349-6530: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

349-6530 STARTING MOTOR GP-ELECTRIC
S/N TXM1-UP; M4X1-UP
24-VOLT

i04039949 SEBP5614

3496530 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7M-0326	[1]	CONNECTOR
2.	9H-3757	[2]	WASHER (0.516X1X0.094-IN THK)
3.	1S-7446	[3]	SCREW-MACHINE (8-32X0.437-IN)
4.	8C-9660	[3]	WASHER (4.6X7.9X0.8-MM THK)
5.	9S-2544	[9]	SCREW-HEX HEAD (8-32X11.13-MM)
6.	7M-0327	[1]	WASHER-THRUST (17.4X25.4X1.6-MM THK)
7.	3T-3418	[1]	FRAME AS-END
	3T-3423	[1]	CUP
	3T-3424	[1]	PLUG-FELT
	9G-4101	[1]	BUSHING-END
8.	3T-9525 Y	[1]	PLATE AS-BRUSH (STARTING MOTOR)
9.	1T-0808	[2]	WASHER (0.516X0.812X0.09-IN THK)
10.	3T-3422	[1]	WIRE AS
11.	2J-8163	[2]	SEAL-O-RING
12.	7X-3373	[1]	BOLT (5/16-18X0.88-IN)
13.	5J-5314	[5]	BOLT (5/16-18X1.5-IN)
14.	3L-3380	[1]	BUSHING-TERMINAL
15.	8C-3089	[1]	SEAL-O-RING
16.	4M-1853	[1]	LEVER AS-SHIFT
17.	5M-3034	[1]	LOCKNUT (5/16-24-THD)
18.	7L-2894	[4]	GASKET
19.	4M-1831	[4]	PLUG-LEVER HOUSING
20.	4M-1854	[1]	SHAFT-LEVER
21.	1H-1023	[1]	SEAL-O-RING
22.	2D-6392	[1]	SEAL-O-RING
23.	7T-3974	[1]	HOUSING AS-DRIVE
24.	6N-3826	[1]	DRIVE AS-MOTOR
25.	2H-3429	[1]	RING-RETAINING
26.	6V-1322	[4]	BOLT (1/4-20X0.375-IN)
27.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
28.	6N-3279	[1]	INSULATOR
29.	0S-1597	[13]	BOLT (1/4-28X1-IN)
30.	1M-9971	[1]	SPACER (0.835X1.72X0.188-IN THK)
31.	1H-2629	[3]	STRIP-INSULATION
32.	7M-0324	[1]	COIL AS-FIELD
33.	3R-8797	[12]	SCREW & WASHER AS (3/8-24X0.72-IN)
34.	7F-3488	[6]	SHOE-POLE
35.	7M-8651	[1]	ARMATURE AS
36.	7M-0325	[1]	INSULATOR
37.	3T-9524	[6]	BRUSH AS
38.	3N-3763	[1]	KIT-TERMINAL (STARTING MOTOR)
			(KIT INCLUDES BUSHINGS & WASHERS)
40.	3R-8801	[1]	CLAMP
41.	8F-1434	[2]	LOCKWASHER
42.	6V-8188	[6]	NUT (1/2-13-THD)
43.	7X-0562	[6]	WASHER-HARD (13.5X19X0.8-MM THK)
44.	4B-2049	[6]	NUT (10-32-THD)
45.	8T-0328	[10]	WASHER-HARD (5.5X10X1-MM THK)
46.	3T-9494	[6]	SPRING
47.	349-6255	[1]	HOUSING AS
48.	9G-4101	[1]	BUSHING-END
49.	3T-3424	[3]	PLUG-FELT
50.	3T-3423	[3]	CUP
51.	1M-9968	[1]	BUSHING
52.	2F-6678	[1]	SEAL-LIP TYPE
53.	4L-2729	[1]	WASHER (0.844X1.9X0.188-IN THK)
54.	4M-1896	[1]	BUSHING-TERMINAL
55.	045-4065	[4]	SCREW-MACHINE (10-32X0.75-IN)
56.	125-6535	[1]	COVER-STARTING MOTOR
57.	338-3453	[1]	SOLENOID AS-STARTING MOTOR (24-VOLT)
	3R-8801	[1]	CLAMP
58.	352-7994	[1]	KIT-SWITCH (RELAY, STARTER)
			(KIT INCLUDES STARTER RELAY SWITCH AS, JUMP START PROTECTION COVER, BOLTS, ANCHOR & CLAMP)
59.	3T-3434	[6]	PLUG
	Y		SEPARATE ILLUSTRATION

#SEBP56140474

352-8869: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

352-8869 STARTING MOTOR GP-ELECTRIC
S/N TXM1-UP; M4X1-UP
24-VOLT
PART OF 342-7863, 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE

i04112349 SEBP5614

3528869 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9Y-6089	[1]	GASKET
2.	306-8156	[1]	STRAP AS-GROUND
3.	8S-2332	[3]	BOLT-12 POINT HEAD (5/8-11X1.75-IN)
4.	349-6519 Y	[1]	STARTING MOTOR GP-ELECTRIC
5.	366-2534	[1]	HARNESS AS-WIRING
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	278-8844	[1]	PLUG AS-CONNECTOR
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	8T-8737	[2]	PLUG-SEAL
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	289-5150 E		SLEEVE (13-CM)
	5P-1476	[2]	TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW)
6.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
7.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP56140475

352-8869: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

352-8869 STARTING MOTOR GP-ELECTRIC
S/N TXM1-UP
24-VOLT
PART OF 365-3524, 417-2599, 422-5494 ENGINE AR-COMPLETE

i06925228 SEBP5614

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9Y-6089	[1]	GASKET
2.	306-8156	[1]	STRAP AS-GROUND
3.	8S-2332	[3]	BOLT-12 POINT HEAD (5/8-11X1.75-IN)
4.	494-6414 CY	[1]	STARTING MOTOR GP-ELECTRIC
5.	366-2534	[1]	HARNESS AS-WIRING
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	278-8844	[1]	PLUG AS-CONNECTOR
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	455-0704	[1]	SEAL-CONNECTOR
	8T-8737	[2]	PLUG-SEAL
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	289-5150 E		SLEEVE (13-CM)
	5P-1476	[2]	TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW)
6.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
7.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP56140476

494-6414: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

494-6414 STARTING MOTOR GP-ELECTRIC
S/N TXM1-UP
24-VOLT
PART OF 352-8869 STARTING MOTOR GP-ELECTRIC

i07078040 SEBP5614

4946414 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7M-0326	[1]	CONNECTOR
2.	9H-3757	[2]	WASHER (0.516X1X0.094-IN THK)
3.	1S-7446	[3]	SCREW-MACHINE (8-32X0.437-IN)
4.	8C-9660	[3]	WASHER (4.6X7.9X0.8-MM THK)
5.	9S-2544	[9]	SCREW-HEX HEAD (8-32X11.13-MM)
6.	7M-0327	[1]	WASHER-THRUST (17.4X25.4X1.6-MM THK)
7.	3T-3418	[1]	FRAME AS-END
7A.	9G-4101	[1]	BUSHING-END
	3T-3423	[1]	CUP
	3T-3424	[1]	PLUG-FELT
8.	3T-9525 Y	[1]	PLATE AS-BRUSH (STARTING MOTOR)
9.	1T-0808	[2]	WASHER (0.516X0.812X0.09-IN THK)
10.	3T-3422	[1]	WIRE AS
11.	533-1539	[2]	KIT-SEAL
			(KIT INCLUDES GASKET, BOOT, O-RINGS, SEAL, & CABLE TIE)
12.	7X-3373	[1]	BOLT (5/16-18X0.88-IN)
13.	5J-5314	[5]	BOLT (5/16-18X1.5-IN)
14.	3L-3380	[1]	BUSHING-TERMINAL
16.	4M-1853	[1]	LEVER AS-SHIFT
17.	5M-3034	[1]	LOCKNUT (5/16-24-THD)
19.	4M-1831	[4]	PLUG-LEVER HOUSING
20.	4M-1854	[1]	SHAFT-LEVER
23.	7T-3974	[1]	HOUSING AS-DRIVE
24.	6N-3826	[1]	DRIVE AS-MOTOR
25.	2H-3429	[1]	RING-RETAINING
26.	6V-1322	[4]	BOLT (1/4-20X0.375-IN)
27.	8T-4205	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
28.	6N-3279	[1]	INSULATOR
29.	0S-1597	[13]	BOLT (1/4-28X1-IN)
30.	1M-9971	[1]	SPACER (0.835X1.72X0.188-IN THK)
31.	1H-2629	[3]	STRIP-INSULATION
32.	7M-0324	[1]	COIL AS-FIELD
33.	3R-8797	[12]	SCREW & WASHER AS (3/8-24X0.72-IN)
34.	7F-3488	[6]	SHOE-POLE
35.	7M-8651	[1]	ARMATURE AS
36.	7M-0325	[1]	INSULATOR
37.	3T-9524	[6]	BRUSH AS
38.	3N-3763	[1]	KIT-TERMINAL (STARTING MOTOR)
39.	3R-8801	[1]	CLAMP
40.	8F-1434	[2]	LOCKWASHER
41.	6V-8188	[6]	NUT (1/2-13-THD)
42.	7X-0562	[6]	WASHER-HARD (13.5X19X0.8-MM THK)
43.	4B-2049	[6]	NUT (10-32-THD)
44.	8T-0328	[10]	WASHER-HARD (5.5X10X1-MM THK)
45.	3T-9494	[6]	SPRING
46.	349-6255	[1]	HOUSING AS
47.	9G-4101	[1]	BUSHING-END
48.	3T-3424	[3]	PLUG-FELT
49.	3T-3423	[3]	CUP
50.	1M-9968	[1]	BUSHING
52.	4L-2729	[1]	WASHER (0.844X1.9X0.188-IN THK)
53.	4M-1896	[1]	BUSHING-TERMINAL
54.	045-4065	[4]	SCREW-MACHINE (10-32X0.75-IN)
55.	125-6535	[1]	COVER-STARTING MOTOR
56.	511-7982	[1]	SOLENOID AS (STARTER)
	3R-8801	[1]	CLAMP
57.	352-7994	[1]	KIT-SWITCH (RELAY, STARTER)
			(INCLUDES SWITCH AS, COVER, BOLT, ANCHOR & CLAMP)
	Y		SEPARATE ILLUSTRATION

#SEBP56140477

357-3849: SWITCH & MTG GP-LIMIT

SWITCH & MTG GP-LIMIT

357-3849 SWITCH & MTG GP-LIMIT -WINDOW WIPER
S/N DGE1-UP; KCN1-UP
PART OF 316-8853 INSTALLATION AR-CAB
AN ATTACHMENT

i04071010 SEBP5614

3573849 SWITCH & MTG GP-LIMIT Parts scheme

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-1163	[1]	BRACKET
2.	357-3967 Y	[1]	SWITCH GP-LIMIT (WIPER)
3.	9X-2042 M	[2]	SCREW-TRUSS HEAD (M6X1X12-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP56140478

7N-0719: SWITCH GP-DISCONNECT

SWITCH GP-DISCONNECT

7N-0719 SWITCH GP-DISCONNECT -BATTERY
S/N DGE1-UP; KCN1-UP
PART OF 328-0248 WIRING GP-CHASSIS

i00156217 SEBP5614

7N0719 SWITCH GP-DISCONNECT Parts scheme

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8H-5306	[1]	KEY (BATTERY DISCONNECT)
2.	8H-5303	[1]	NUT (3/4-16-THD)
3.	2H-3922	[2]	LOCKWASHER
4.	9F-5644	[2]	LOCKWASHER
5.	6F-7045	[2]	NUT-FULL (3/8-24-THD)

#SEBP56140479

357-3967: SWITCH GP-LIMIT

SWITCH GP-LIMIT

357-3967 SWITCH GP-LIMIT -WIPER
S/N DGE1-UP; KCN1-UP
PART OF 357-3849 SWITCH & MTG GP-LIMIT
AN ATTACHMENT

i04078349 SEBP5614

For full view, you need register

Parts for your 349E L VG EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[1]	STRAP-CABLE
2.	111-4799	[1]	SWITCH AS-LIMIT (WIPER)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	5P-0688	[3]	TUBE
3.	357-3968	[1]	BRACKET AS
4.	357-3971	[1]	BRACKET
5.	096-5962	[2]	WASHER-HARD (3.4X7X0.8-MM THK)
6.	120-9027 M	[2]	SCREW-PAN HEAD (M3X0.5X16-MM)
7.	5P-8524	[1]	GROMMET
8.	9X-2042 M	[2]	SCREW-TRUSS HEAD (M6X1X12-MM)
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

SENSOR GP

Special Instruction

Installation Procedure for the 354-4378 Pressure Sensor Group {1439, 5051}
Installation Procedure for the 354-4378 Pressure Sensor Group {1439, 5051}

Master Guide for Field Installation of Auxiliary Hydraulic Systems for 349E Excavators{1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 5059, 5070, 5073, 5458, 5705, 7000, 7301, 7553}
Master Guide for Field Installation of Auxiliary Hydraulic Systems for 349E Excavators{1408, 1439, 1916, 1917, 1923, 1924, 5051, 5057, 5059, 5070, 5073, 5458, 5705, 7000, 7301, 7553}

Instructions for Installing Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736, 7220}
Instructions for Installing Rotary Position Sensor for Cat^® Grade Control on Certain Series E and Series F Excavators {5736, 7220}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Updating the NOx Reduction System Delta Pressure Sensor on Certain C9.3 Through C32 Engines {1408, 191N}
Updating the NOx Reduction System Delta Pressure Sensor on Certain C9.3 Through C32 Engines {1408, 191N}

Machine Guidance Upgrades For Cat® Grade Control Hydraulic Excavators {7220}
Machine Guidance Upgrades For Cat^® Grade Control Hydraulic Excavators {7220}

Troubleshooting Guide for the Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736}
Troubleshooting Guide for the Rotary Position Sensor for Cat^® Grade Control on Certain Series E and Series F Excavators {5736}

Installation, Measurement, and Calibration of the Cat® Grade Control System on E-Series and F-Series Hydraulic Excavators {5736, 7220}
Installation, Measurement, and Calibration of the Cat^® Grade Control System on E-Series and F-Series Hydraulic Excavators {5736, 7220}

Technical Information Bulletin

Failure of Temperature Sensor Gp in Clean Emissions Module on certain Cat® Products{108D, 1408, 1919}
Failure of Temperature Sensor Gp in Clean Emissions Module on certain Cat^® Products{108D, 1408, 1919}

The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}
The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}

Check the Stick Rotary Position Sensor Linkage Washers on Certain 312E to 349E Excavators with Cat Grade Control{5736}
Check the Stick Rotary Position Sensor Linkage Washers on Certain 312E to 349E Excavators with Cat Grade Control{5736}

Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}

Specifications

Pressure Sensor
349E Excavator Machine System Specifications

Pressure Sensor - Accumulator
349E Excavator Machine System Specifications

Pressure Sensor - BOOM DOWN
349E Excavator Machine System Specifications

Position Sensor (Boom)
349E Excavator Machine System Specifications

Tool Operating Manual

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Sensors
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System

Reuse And Salvage Guidelines

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Troubleshooting

Sensor Supply - Test
C13, C15, and C18 Tier 4 Interim Engines

Timing - Calibrate
C13, C15, and C18 Tier 4 Interim Engines

Sensor Signal (Analog, Active) - Test
C13, C15, and C18 Tier 4 Interim Engines

Sensor Calibration Required - Test
C13, C15, and C18 Tier 4 Interim Engines

Coolant Level - Test
C13, C15, and C18 Tier 4 Interim Engines

Soot Sensor - Test
C13, C15, and C18 Tier 4 Interim Engines

Sensor Signal (Analog, Passive) - Test
C13, C15, and C18 Tier 4 Interim Engines

Speed/Timing - Test
C13, C15, and C18 Tier 4 Interim Engines

MID 299, 41-6
349E Excavator Machine Electronic Control System

MID 299, 600-4
349E Excavator Machine Electronic Control System

MID 299, 600-9
349E Excavator Machine Electronic Control System

MID 299, 1129-3
349E Excavator Machine Electronic Control System

MID 299, 1129-4
349E Excavator Machine Electronic Control System

MID 299, 1129-8
349E Excavator Machine Electronic Control System

MID 299, 1130-3
349E Excavator Machine Electronic Control System

MID 299, 1130-4
349E Excavator Machine Electronic Control System

MID 299, 1130-8
349E Excavator Machine Electronic Control System

MID 299, 1609-3
349E Excavator Machine Electronic Control System

MID 299, 1609-4
349E Excavator Machine Electronic Control System

MID 299, 1609-8
349E Excavator Machine Electronic Control System

MID 299, 1956-3
349E Excavator Machine Electronic Control System

MID 299, 1956-4
349E Excavator Machine Electronic Control System

MID 299, 1956-8
349E Excavator Machine Electronic Control System

MID 299, 1960-9
349E Excavator Machine Electronic Control System

MID 299, 1968-3
349E Excavator Machine Electronic Control System

MID 299, 1968-4
349E Excavator Machine Electronic Control System

MID 299, 1968-8
349E Excavator Machine Electronic Control System

MID 299, 1969-3
349E Excavator Machine Electronic Control System

MID 299, 1969-4
349E Excavator Machine Electronic Control System

MID 299, 1969-8
349E Excavator Machine Electronic Control System

MID 299, 2265-3
349E Excavator Machine Electronic Control System

MID 299, 2265-4
349E Excavator Machine Electronic Control System

MID 299, 2265-8
349E Excavator Machine Electronic Control System

MID 299, 2266-3
349E Excavator Machine Electronic Control System

MID 299, 2266-4
349E Excavator Machine Electronic Control System

MID 299, 2266-8
349E Excavator Machine Electronic Control System

MID 299, 2425-3
349E Excavator Machine Electronic Control System

MID 299, 2425-4
349E Excavator Machine Electronic Control System

MID 299, 2425-8
349E Excavator Machine Electronic Control System

MID 299, 2426-3
349E Excavator Machine Electronic Control System

MID 299, 2426-4
349E Excavator Machine Electronic Control System

MID 299, 2426-8
349E Excavator Machine Electronic Control System

MID 299, 2429-3
349E Excavator Machine Electronic Control System

MID 299, 2429-4
349E Excavator Machine Electronic Control System

MID 299, 2429-8
349E Excavator Machine Electronic Control System

MID 299, 3012-3
349E Excavator Machine Electronic Control System

MID 299, 3012-4
349E Excavator Machine Electronic Control System

MID 299, 3012-8
349E Excavator Machine Electronic Control System

MID 299, 3545-8
349E Excavator Machine Electronic Control System

MID 299, 3545-4
349E Excavator Machine Electronic Control System

MID 299, 3546-3
349E Excavator Machine Electronic Control System

MID 299, 3546-4
349E Excavator Machine Electronic Control System

MID 299, 3546-8
349E Excavator Machine Electronic Control System

MID 299, 3572-3
349E Excavator Machine Electronic Control System

MID 299, 3572-4
349E Excavator Machine Electronic Control System

MID 299, 3572-8
349E Excavator Machine Electronic Control System

MID 299, 3573-3
349E Excavator Machine Electronic Control System

MID 299, 3573-4
349E Excavator Machine Electronic Control System

MID 299, 3573-8
349E Excavator Machine Electronic Control System

MID 299, 3574-3
349E Excavator Machine Electronic Control System

MID 299, 3574-4
349E Excavator Machine Electronic Control System

MID 299, 3574-8
349E Excavator Machine Electronic Control System

MID 299, 3577-3
349E Excavator Machine Electronic Control System

MID 299, 3577-4
349E Excavator Machine Electronic Control System

MID 299, 3577-8
349E Excavator Machine Electronic Control System

MID 299, 3578-3
349E Excavator Machine Electronic Control System

MID 299, 3578-4
349E Excavator Machine Electronic Control System

MID 299, 3578-8
349E Excavator Machine Electronic Control System

MID 299, 3545-3
349E Excavator Machine Electronic Control System

MID 299, 1952-2
349E Excavator Machine Electronic Control System

MID 299, 1952-9
349E Excavator Machine Electronic Control System

MID 299, 3687-9
349E Excavator Machine Electronic Control System

MID 299, 3687-2
349E Excavator Machine Electronic Control System

MID 299, 3685-2
349E Excavator Machine Electronic Control System

MID 299, 3685-9
349E Excavator Machine Electronic Control System

Disassembly and Assembly

Exhaust Sensor Lines - Remove and Install - Venturi
C13
Engines for Caterpillar Built Machines

Camshaft Position Sensor - Remove and Install
C13
Engines for Caterpillar Built Machines

Crankshaft Position Sensor - Remove and Install
C13
Engines for Caterpillar Built Machines

Coolant Temperature Sensor - Remove and Install
C13
Engines for Caterpillar Built Machines

Engine Oil Pressure Sensor - Remove and Install
C13
Engines for Caterpillar Built Machines

Crankcase Pressure Sensor - Remove and Install
C13
Engines for Caterpillar Built Machines

Fuel Pressure Sensor - Remove and Install
C13
Engines for Caterpillar Built Machines

Fuel Temperature Sensor - Remove and Install
C13
Engines for Caterpillar Built Machines

Boost Pressure Sensor - Remove and Install
C13
Engines for Caterpillar Built Machines

Inlet Manifold Temperature Sensor - Remove and Install
C13
Engines for Caterpillar Built Machines

Atmospheric Pressure Sensor - Remove and Install
C13
Engines for Caterpillar Built Machines

Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C13
Engines for Caterpillar Built Machines

Temperature Sensor (Aftercooler Air) - Remove and Install
C13
Engines for Caterpillar Built Machines

Pressure Sensor (Cooled Exhaust Gas) - Remove and Install
C13
Engines for Caterpillar Built Machines

Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - Differential Pressure Sensor
C13
Engines for Caterpillar Built Machines

Pressure Sensor (DPF) - Remove and Install - Differential Pressure, Clean Emissions Module
C13
Engines for Caterpillar Built Machines

Flame Detection Temperature Sensor - Remove and Install - Clean Emissions Module
C13
Engines for Caterpillar Built Machines

Soot Antenna - Remove and Install
C13
Engines for Caterpillar Built Machines

Temperature Sensor (DPF) - Remove and Install - Clean Emissions Module
C13
Engines for Caterpillar Built Machines

Soot Sensor - Remove and Install
C13
Engines for Caterpillar Built Machines

Flame Detection Temperature Sensor - Remove and Install - Clean Emissions Module
349E Excavator and 349E MHPU
Mobile Hydraulic Power Unit C13 Engine Supplement

Soot Sensor - Remove and Install - Antenna, Clean Emissions Module
349E Excavator and 349E MHPU
Mobile Hydraulic Power Unit C13 Engine Supplement

Pressure Sensor (DPF) - Remove and Install - Aftertreatment Pressure
349E Excavator and 349E MHPU
Mobile Hydraulic Power Unit C13 Engine Supplement

Temperature Sensor (DPF) - Remove and Install - Clean Emissions Module
349E Excavator and 349E MHPU
Mobile Hydraulic Power Unit C13 Engine Supplement

Pressure Sensor (DPF) - Remove and Install - Intake Pressure
349E Excavator and 349E MHPU
Mobile Hydraulic Power Unit C13 Engine Supplement

Pressure Sensor (DPF) - Remove and Install
C13
Engines for Caterpillar Built Machines

Pressure Sensor (ARD Combustion Air) - Remove and Install
C13
Engines for Caterpillar Built Machines

Soot Sensor - Remove and Install
349E Excavator and 349E MHPU
Mobile Hydraulic Power Unit C13 Engine Supplement

Service Magazine

Troubleshooting the "Water Separator Has Water" Warning Message {1263, 1439}
2014/09/01

RF Soot Sensor System Is Being Removed from Certain Tier 4 Interim Machines {108F, 1335, 1408, 7490}
2011/11/02

An Improved Fan Speed Sensor Is Now Used on Certain 349E Hydraulic Excavators {1907}
2013/05/08

New Fuel Pressure Sensors Are Available to Replace the ARD Pilot and Main Pressure Sensors on Certain Machines {1274, 1718}
2013/03/20

The NOx Reduction System (NRS) Intake Pressure Sensor and Diesel Particulate Filter (DPF) Inlet Pressure Sensor Has Been Improved {108F, 108R, 1439}
2013/09/06

A New NOx Reduction System Delta Pressure Sensor Is Now Used on Certain C9.3 through C32 ACERT Engines {1052, 1058, 1408, 1718, 1907, 1912, 1916, 1917, 1923, 1924, 1925, 3175, 4351, 4352, 7400, 7494}
2014/02/03

Assembly Process Improvements for the Stick Rotary Position Linkage are Now Used on Certain 312E to 349E Excavators with Cat Grade Control {5736}
2014/04/18

Improved Pressure Sensor Gp Is Now Used on Certain Cat® Products {1439}
2014/09/25

A New Check Valve and Pressure Sensors Are Used on Certain Tier 4 Interim Machine Engines {1439}
2014/12/18

A Torque Specification Prevents Damage to the Liquid Level Sensor Gp {7422}
2015/08/19

Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}
Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}

Caterpillar Parts SIS Catalog 349E L VG :

234-5012 SENSOR GP-TEMPERATURE

384-1836 SENSOR GP-SPEED

364-0608 SENSOR GP-SPEED

300-9806 SENSOR GP-SPEED

300-9805 SENSOR GP-SPEED

385-1173 SENSOR GP-PRESSURE

382-4384 SENSOR GP-PRESSURE

362-8936 SENSOR GP-PRESSURE

324-4364 STARTING AID GP-ETHER

349-6519 STARTING MOTOR GP-ELECTRIC

349-6530 STARTING MOTOR GP-ELECTRIC

352-8869 STARTING MOTOR GP-ELECTRIC

494-6414 STARTING MOTOR GP-ELECTRIC

357-3849 SWITCH & MTG GP-LIMIT

7N-0719 SWITCH GP-DISCONNECT

Truck sale:

333,500

Caterpillar 349ELVG, Construction
- Crawler Excavators
THOMPSON TRACTOR CO., INC.

Caterpillar 349ELVG, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
France

199,000

Caterpillar 349ELVG, Construction
- Crawler Excavators
PATTEN INDUSTRIES, INC.

210,000

Caterpillar 349ELVG, Construction
- Crawler Excavators
PATTEN INDUSTRIES, INC.

Caterpillar 349ELVG, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
France