AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

361-3321 CYLINDER GP-BUCKET S/N BYP1-UP 200-MM (7.9-IN) BORE X 1451-MM (57.1-IN) STROKE PART OF 361-3322 CYLINDER & SEAL GP-BUCKET AN ATTACHMENT 390D


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP

EXCAVATOR 390D EXCAVATOR BYP
 390D Excavator BYP00001-UP (MACHINE) POWERED BY C18 Engine SEBP5615 390D BYP   (2010)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BOOM
362-9780 CYLINDER GP-BOOM
CYLINDER GP-BUCKET
361-2862 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
361-3321 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
362-4589 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
362-5365 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
570-1989 CYLINDER GP-BUCKET
 

#SEBP56150480
 

361-3321: CYLINDER GP-BUCKET

361-3321 CYLINDER GP-BUCKET
S/N BYP1-UP
200-MM (7.9-IN) BORE X 1451-MM (57.1-IN) STROKE
PART OF 361-3322 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT
i03983354 SEBP5615
3613321 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 361-3318 [1] CYLINDER AS  
1A. 198-5529 BUSHING  
2. 361-3320 [1] ROD AS  
2A. 6E-0813 [1] BUSHING  
3. 424-2919 [1] HEAD  
4. 433-5662 [1] PISTON  
5. 147-5776 J [1] RING  
6. 147-5738 J [2] RING  
7. 8C-9179 J [1] SEAL AS  
8. 095-1731 J [1] SEAL-O-RING  
9. 4I-6330 J [1] RING-BACKUP  
10. 128-9261 [1] BUSHING  
11. 102-0786 [1] RING-RETAINING  
12. 367-3928 J [1] SEAL-BUFFER  
13. 367-3929 J [1] SEAL-U-CUP  
14. 147-5771 J [1] RING-BACKUP  
15. 165-9294 J [1] SEAL-LIP TYPE  
16. 9X-8399 [11] WASHER (33X56X6-MM THK)  
17. 177-9754 M [11] BOLT (M30X3.5X130-MM)  
18. 116-3513 M [1] LOCKNUT-NYLON (M105X2-THD)  
19. 5M-6213 [1] PLUG-PIPE (1/4-18-THD)  
20. 8T-6757 [1] PLUG-PIPE  
   
    AVAILABLE REPAIR KIT(S):
  370-1940 J [1] KIT-SEAL  
    (ALSO INCLUDES SEAL RING)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP56150481
 

362-4589: CYLINDER GP-BUCKET

362-4589 CYLINDER GP-BUCKET
S/N BYP1-UP
220-MM (8.7-IN) BORE X 1586-MM (62.4-IN) STROKE. JB-FAMILY
PART OF 362-6002 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT
i05735763 SEBP5615
3624589 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 362-4564 [1] CYLINDER AS-HYDRAULIC  
1A. 172-2848 [1] BUSHING  
2. 361-2830 [1] ROD AS-HYDRAULIC CYLINDER  
2A. 308-8824 [1] BUSHING  
3. 421-1899 [1] HEAD  
4. 433-5664 [1] PISTON  
5. 116-3516 JM [1] NUT-SELF LOCKING (M120X2-THD)  
6. 155-9157 J [2] RING  
7. 514-6718 J [1] SEAL-LIP TYPE  
8. 367-3934 J [1] SEAL-BUFFER  
9. 173-3414 J [1] RING  
10. 095-1733 J [1] SEAL-O-RING  
11. 103-8364 [1] RING-RETAINING  
12. 128-9262 [1] BUSHING  
13. 367-3961 J [1] SEAL-U-CUP  
14. 514-6719 J [1] RING-BACKUP  
15. 4I-6442 J [1] RING-BACKUP  
16. 8C-9182 J [1] SEAL AS  
17. 9X-8399 [12] WASHER (33X56X6-MM THK)  
18. 177-9754 M [12] BOLT (M30X3.5X130-MM)  
19. 5M-6213 [1] PLUG-PIPE (1/4-18-THD)  
20. 8T-6757 [1] PLUG-PIPE  
   
    AVAILABLE REPAIR KIT(S):
  519-1485 J [1] KIT-SEAL (BUCKET CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP56150482
 

362-5365: CYLINDER GP-BUCKET

362-5365 CYLINDER GP-BUCKET
S/N BYP1-UP
200-MM (7.87-IN) BORE X 1451-MM (57.13-IN) STROKE
PART OF 362-6004 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT
i05738696 SEBP5615
3625365 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 362-4928 [1] CYLINDER AS-HYDRAULIC  
1A. 198-5529 BUSHING  
2. 361-3320 [1] ROD AS  
2A. 6E-0813 [1] BUSHING  
3. 424-2919 [1] HEAD  
4. 433-5662 [1] PISTON  
5. 147-5776 J [1] RING  
6. 147-5738 J [2] RING  
7. 8C-9179 J [1] SEAL AS  
8. 095-1731 J [1] SEAL-O-RING  
9. 4I-6330 J [1] RING-BACKUP  
10. 128-9261 [1] BUSHING  
11. 102-0786 [1] RING-RETAINING  
12. 367-3928 J [1] SEAL-BUFFER  
13. 367-3929 J [1] SEAL-U-CUP  
14. 147-5771 J [1] RING-BACKUP  
15. 165-9294 J [1] SEAL-LIP TYPE  
16. 9X-8399 [11] WASHER (33X56X6-MM THK)  
17. 177-9754 M [11] BOLT (M30X3.5X130-MM)  
18. 116-3513 M [1] LOCKNUT-NYLON (M105X2-THD)  
19. 5M-6213 [1] PLUG-PIPE (1/4-18-THD)  
20. 8T-6757 [1] PLUG-PIPE  
   
    AVAILABLE REPAIR KIT(S):
  370-1940 J [1] KIT-SEAL (BUCKET)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP56150483
 

570-1989: CYLINDER GP-BUCKET

570-1989 CYLINDER GP-BUCKET
S/N BYP1-UP
220-MM (8.7-IN) BORE X 1586-MM (62.4-IN) STROKE
PART OF 362-6002 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT
i07635867 SEBP5615
5701989 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-6442 J [1] RING-BACKUP  
2. 8C-9182 J [1] SEAL AS  
3. 9X-8399 [12] WASHER (33X56X6-MM THK)  
4. 103-8364 [1] RING-RETAINING  
5. 116-3516 M [1] NUT-SELF LOCKING (M120X2-THD)  
6. 128-9262 [1] BUSHING  
7. 155-9157 J [2] RING  
8. 173-3414 J [1] RING  
9. 362-4564 [1] CYLINDER AS-HYDRAULIC  
10. 367-3934 J [1] SEAL-BUFFER  
11. 367-3961 J [1] SEAL-U-CUP  
12. 421-1899 [1] HEAD  
13. 433-5664 [1] PISTON  
14. 514-6718 J [1] SEAL-LIP TYPE  
15. 514-6719 J [1] RING-BACKUP  
16. 095-1733 J [1] SEAL-O-RING  
17. 177-9754 M [12] BOLT (M30X3.5X130-MM)  
18. 570-1990 [1] ROD AS  
18A. 308-8824 [1] BUSHING  
   
    AVAILABLE REPAIR KIT(S):
  519-1485 J [1] KIT-SEAL (BUCKET CYLINDER)  
    (ALSO INCLUDES BACK-UP RING)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP56150484
 

353-9625: CYLINDER GP-STICK

353-9625 CYLINDER GP-STICK
S/N BYP1-UP
220-MM (8.7-IN) BORE X 2262-MM (89-IN) STROKE
PART OF 353-9643 CYLINDER & SEAL GP-HYDRAULIC
AN ATTACHMENT
i03908024 SEBP5615
3539625 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-3516 M [1] NUT-SELF LOCKING (M120X2-THD)  
2. 116-3518 [1] STOP  
3. 116-3519 J [1] RING-SEAL  
4. 165-9296 J [1] SEAL-LIP TYPE  
5. 170-9853 J [1] SEAL-BUFFER  
6. 173-3366 [1] HEAD  
7. 215-9972 [1] PISTON  
8. 317-8434 [1] NUT  
9. 317-8435 [1] ROD AS  
9A. 172-2848 [1] BUSHING  
10. 353-9626 [1] CYLINDER AS  
  353-9631 [1] CAP & BEARING AS  
10A. 172-2848 [1] BUSHING  
11. 191-5704 [1] STOP  
12. 095-1733 J [1] SEAL-O-RING  
13. 103-8364 [1] RING-RETAINING  
14. 128-9262 [1] BUSHING  
15. 155-9157 J [2] RING  
16. 170-4763 M [2] SETSCREW-SOCKET  
17. 173-3414 J [1] RING  
18. 215-9864 J [1] RING-BACKUP  
19. 216-0011 J [1] SEAL-U-CUP  
20. 4I-6442 J [1] RING-BACKUP  
21. 8C-9182 J [1] SEAL AS  
22. 9X-6618 M [12] BOLT (M30X3.5X130-MM)  
23. 9X-8258 [12] WASHER (33X56X6-MM THK)  
24. 8C-4893 [1] SEAL-HEAD (211.58-MM ID)  
   
    AVAILABLE REPAIR KIT(S):
  216-0000 J [1] KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP56150485
 

363-1685: CYLINDER GP-STICK

363-1685 CYLINDER GP-STICK
S/N BYP1-UP
220-MM (8.7-IN) BORE X 2262-MM (89.1-IN) STROKE
FIELD REPLACEMENT FOR @@@@@365-3312@@@@@
i05736743 SEBP5615
3631685 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-3519 J [1] RING-SEAL  
2. 128-9262 [1] BUSHING  
3. 155-9157 J [2] RING  
4. 165-9296 J [1] SEAL-LIP TYPE  
5. 173-3414 J [1] RING  
6. 191-5704 [1] STOP  
7. 317-8435 [1] ROD AS  
7A. 172-2848 [1] BUSHING  
8. 350-3842 M [2] SETSCREW (M8X1.25X12.3-MM)  
9. 353-9626 [1] CYLINDER AS  
9A. 172-2848 [1] BUSHING  
10. 365-3598 [1] HEAD  
11. 365-9196 J [1] SEAL-O-RING  
12. 367-3934 J [1] SEAL-BUFFER  
13. 367-3961 J [1] SEAL-U-CUP  
14. 383-8638 [1] STOP  
15. 433-5664 [1] PISTON  
16. 436-8027 [1] NUT  
17. 103-8364 [1] RING-RETAINING  
18. 116-3516 M [1] NUT-SELF LOCKING (M120X2-THD)  
19. 177-9754 M [12] BOLT (M30X3.5X130-MM)  
20. 215-9864 J [1] RING-BACKUP  
21. 365-9197 J [2] RING-BACKUP  
22. 8C-4893 J [1] SEAL-HEAD (211.58-MM ID)  
23. 8C-9182 J [1] SEAL AS  
24. 9X-8399 [12] WASHER (33X56X6-MM THK)  
25. 5M-6213 [2] PLUG-PIPE (1/4-18-THD)  
   
    AVAILABLE REPAIR KIT(S):
  370-1866 J KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP56150486
 

365-3312: CYLINDER GP-STICK

365-3312 CYLINDER GP-STICK
S/N BYP1-UP
220-MM (8.7-IN) BORE X 2262-MM (89.1-IN) STROKE
PART OF 353-9643 CYLINDER & SEAL GP-HYDRAULIC
FIELD REPLACEMENT ORDER @@@@@363-1685@@@@@
AN ATTACHMENT
i05736738 SEBP5615
3653312 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-3519 J [1] RING-SEAL  
2. 128-9262 [1] BUSHING  
3. 155-9157 J [2] RING  
4. 165-9296 J [1] SEAL-LIP TYPE  
5. 173-3414 J [1] RING  
6. 191-5704 [1] STOP  
7. 317-8435 [1] ROD AS  
7A. 172-2848 [1] BUSHING  
8. 350-3842 M [2] SETSCREW (M8X1.25X12.3-MM)  
9. 353-9626 [1] CYLINDER AS  
9A. 172-2848 [1] BUSHING  
10. 365-3598 [1] HEAD  
11. 367-3934 J [1] SEAL-BUFFER  
12. 367-3961 J [1] SEAL-U-CUP  
13. 383-8638 [1] STOP  
14. 433-5664 [1] PISTON  
15. 436-8027 [1] NUT  
16. 103-8364 [1] RING-RETAINING  
17. 116-3516 M [1] NUT-SELF LOCKING (M120X2-THD)  
18. 177-9754 M [12] BOLT (M30X3.5X130-MM)  
19. 215-9864 J [1] RING-BACKUP  
20. 365-9196 J [1] SEAL-O-RING  
21. 365-9197 J [2] RING-BACKUP  
22. 5M-6213 [2] PLUG-PIPE (1/4-18-THD)  
23. 8C-4893 J [1] SEAL-HEAD (211.58-MM ID)  
24. 8C-9182 J [1] SEAL AS  
25. 9X-8258 [12] WASHER (33X56X6-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  370-1866 J [1] KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP56150487
 

570-1981: CYLINDER GP-STICK

570-1981 CYLINDER GP-STICK
S/N BYP1-UP
220-MM (8.7-IN) BORE X 2262-MM (89.1-IN) STROKE
PART OF 362-6005 CYLINDER & SEAL GP-STICK
FIELD REPLACEMENT FOR @@@@@363-1685@@@@@
AN ATTACHMENT
i07776832 SEBP5615
5701981 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-6213 [2] PLUG-PIPE (1/4-18-THD)  
2. 8C-4893 J [1] SEAL-HEAD (211.58-MM ID)  
3. 8C-9182 J [1] SEAL AS  
4. 9X-8399 [12] WASHER (33X56X6-MM THK)  
5. 103-8364 [1] RING-RETAINING  
6. 116-3516 M [1] NUT-SELF LOCKING (M120X2-THD)  
7. 116-3519 J [1] RING-SEAL  
8. 155-9157 J [2] RING  
9. 173-3414 J [1] RING  
10. 177-9754 M [12] BOLT (M30X3.5X130-MM)  
11. 191-5704 [1] STOP  
12. 317-8435 [1] ROD AS  
12A. 172-2848 [1] BUSHING  
13. 350-3842 M [2] SETSCREW (M8X1.25X12.3-MM)  
14. 353-9626 [1] CYLINDER AS  
14A. 172-2848 [1] BUSHING  
15. 365-9196 J [1] SEAL-O-RING  
16. 365-9197 J [2] RING-BACKUP  
17. 367-3934 J [1] SEAL-BUFFER  
18. 367-3961 J [1] SEAL-U-CUP  
19. 383-8638 [1] STOP  
20. 433-5664 [1] PISTON  
21. 436-8027 [1] NUT  
22. 514-6718 J [1] SEAL-LIP TYPE  
23. 514-6719 J [1] RING-BACKUP  
24. 570-1982 [1] HEAD  
25. 570-1983 [1] BEARING-SLEEVE  
26. 570-1984 J [1] RING-WEAR  
   
    AVAILABLE REPAIR KIT(S):
  570-1985 JY [1] KIT-HYDRAULIC CYLINDER  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56150488
 

6I-3638: DRIVE GP-PUMP

6I-3638 DRIVE GP-PUMP
S/N TXH1-UP; RHX8224-UP
PART OF 283-2438, 349-4446 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i01504030 SEBP5615
6I3638 DRIVE GP-PUMP Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1590 [3] BOLT (3/8-16X2-IN)  
2. 8T-9527 [1] SEAL-O-RING  
3. 133-9907 YC [1] ADAPTER GP-PUMP DRIVE  
4. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 9S-8752 [1] NUT-FULL (3/8-16-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP56150489
 

148-4598: DRIVE GP-SWING

148-4598 DRIVE GP-SWING -WITHOUT MOTOR, FRONT
S/N BYP1-UP
PART OF 227-6131 DRIVE GP-SWING
i02456884 SEBP5615
1484598 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-4602 [4] GEAR-PLANETARY (24-TEETH)  
2. 094-1528 [8] WASHER (53X84X1-MM THK)  
3. 148-4608 [4] SHAFT-PLANETARY  
4. 191-2525 [1] COVER-HOUSING  
5. 148-4600 [1] GEAR-SUN (17-TEETH)  
6. 7I-7684 M [2] SPACER (50X79.6X6-MM THK)  
7. 199-4680 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
8. 199-4678 [1] PIPE AS  
9. 096-1441 [1] RING-RETAINING  
10. 093-1730 [1] RING-RETAINING  
11. 148-4601 [1] GEAR-SUN (17-TEETH)  
12. 191-2511 [1] CARRIER-PLANETARY  
13. 114-1322 [1] RING-RETAINING  
14. 148-4607 [1] CARRIER-PLANETARY  
15. 148-4604 [1] GEAR-RING (67-TEETH)  
17. 1U-8846 B SEALANT-GASKET  
18. 110-7149 [1] RING-RETAINING  
19. 9U-8693 [1] BEARING-ROLLER  
20. 6V-7238 [1] VALVE-SHUTOFF  
21. 3K-0360 [1] SEAL-O-RING  
22. 7I-7619 [1] BEARING-ROLLER  
23. 128-9170 [2] SEAL-LIP TYPE  
24. 199-4496 [1] SHAFT-PINION  
25. 7I-7611 [1] CAGE  
26. 453-3447 M [10] BOLT (M12X1.75X40-MM)  
27. 451-2182 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
28. 5M-4454 [1] SEAL-O-RING  
29. 191-2524 [1] HOUSING  
30. 148-4611 [8] WASHER (71.3X112X1-MM THK)  
31. 191-2514 [8] BEARING AS  
32. 148-4609 [4] SHAFT-PLANETARY  
33. 148-4603 [4] GEAR-PLANETARY (24-TEETH)  
34. 099-5194 [8] PIN-SPRING  
35. 453-4169 M [24] BOLT (M16X2X200-MM)  
36. 451-2175 [24] WASHER-HARD (17.5X30X3.5-MM THK)  
37. 191-2513 [4] BEARING AS-ROLLER  
38. 227-6221 C [1] BREATHER AS (SWING DRIVE)  
  4H-6112 [1] BREATHER (SWING DRIVE)  
  227-6215 [1] BOSS (1/4-18-THD)  
  267-6785 [1] PIPE  
39. 171-9413 [1] SPACER (140.5X160X103.2-MM THK)  
40. 199-4672 [1] CONNECTOR AS  
  6V-9746 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
The Lip Type Seal Installed in the Cylinder Heads of the Bucket Cylinder and Stick Cylinder May Move Out of the Cylinder Head Seal Groove on 390D Excavators{5457, 5458}
The Lip Type Seal Installed in the Cylinder Heads of the Bucket Cylinder and Stick Cylinder May Move Out of the Cylinder Head Seal Groove on 390D Excavators{5457, 5458}
Stick Cylinder Rod Bending or Cracking on Certain 390D and 390F Excavators and Mobile Hydraulic Power Units {5458}
Stick Cylinder Rod Bending or Cracking on Certain 390D and 390F Excavators and Mobile Hydraulic Power Units {5458}
Stick Cylinder Rod Assembly May Bend or Crack on Certain Excavators and Mobile Hydraulic Power Units {5458}
Stick Cylinder Rod Assembly May Bend or Crack on Certain Excavators and Mobile Hydraulic Power Units {5458}
Specifications
Boom Cylinder
390D Excavator Machine System Specifications
Boom Cylinder Lines
390D Excavator Machine System Specifications
Load Control Valve (Boom)
390D Excavator Machine System Specifications
Boom Cylinder Lines
390D Excavator Machine System Specifications
Boom Lines
390D Excavator Machine System Specifications
Stick Cylinder
390D Excavator Machine System Specifications
Boom Lines
390D Excavator Machine System Specifications
Bucket Cylinder
390D Excavator Machine System Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Systems Operation
Cylinders (Boom, Stick and Bucket)
390D Excavator Hydraulic System
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Cylinder Drift - Check - Empty Bucket
390D Excavator Hydraulic System
Cylinder Drift - Check - Loaded Bucket
390D Excavator Hydraulic System
Cylinder Speed - Check
390D Excavator Hydraulic System
Relief Valve (Counterweight Cylinder) - Test and Adjust
390D Excavator Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Counterweight Cylinder - Remove
390D Excavator Machine Systems
Counterweight Cylinder - Install
390D Excavator Machine Systems
Bucket Cylinder - Remove and Install
390D Excavator Machine Systems
Cylinder Pressure Release - Boom Lowering Control Valve
390D Excavator Machine Systems
Stick Cylinder - Remove and Install
390D Excavator Machine Systems
Service Magazine
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
New Seal Kits for the Stick Cylinder is Now Used on Certain Excavators {5458}
2013/01/15
A New Boom Cylinder Group and Rod Assembly is Now Used on Certain Excavators, Material Handlers, and Mobile Hydraulic Power Units {5456}
A New Boom Cylinder Group and Rod Assembly is Now Used on Certain Excavators, Material Handlers, and Mobile Hydraulic Power Units {5456}
Improved Stick and Bucket Cylinder Rod Seals Are Now Used on Certain Excavators {5457, 5458}
Improved Stick and Bucket Cylinder Rod Seals Are Now Used on Certain Excavators {5457, 5458}

Caterpillar Parts SIS Catalog 390D :

CYLINDER GP-BUCKET
361-2862 CYLINDER GP-BUCKET
CYLINDER GP-BOOM
362-9780 CYLINDER GP-BOOM
CYLINDER GP-BOOM
353-9616 CYLINDER GP-BOOM
CYLINDER GP-BOOM
353-9616 CYLINDER GP-BOOM
CYLINDER & SEAL GP-STICK
362-6005 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-HYDRAULIC
353-9650 CYLINDER & SEAL GP-HYDRAULIC
CYLINDER & SEAL GP-HYDRAULIC
353-9643 CYLINDER & SEAL GP-HYDRAULIC
CYLINDER & SEAL GP-HYDRAULIC
353-9643 CYLINDER & SEAL GP-HYDRAULIC
CYLINDER GP-BUCKET
362-4589 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
362-5365 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
570-1989 CYLINDER GP-BUCKET
CYLINDER GP-STICK
353-9625 CYLINDER GP-STICK
CYLINDER GP-STICK
363-1685 CYLINDER GP-STICK
CYLINDER GP-STICK
365-3312 CYLINDER GP-STICK
CYLINDER GP-STICK
570-1981 CYLINDER GP-STICK
DRIVE GP-PUMP
6I-3638 DRIVE GP-PUMP

Truck sale:

Caterpillar 390D
 
Caterpillar 390D
- Crawler Excavators
FINNING CANADA
Caterpillar 390D, bucket, Construction
14,264 
Caterpillar 390D, bucket, Construction
- bucket
FINNING CANADA
Caterpillar 390D, schaufel, Bau-Und Bergbauausrüstung
29.311 
Caterpillar 390D, schaufel, Bau-Und Bergbauausrüstung
- bucket
FINNING CANADA
 
387,487 
Caterpillar 390D, Construction
- Crawler Excavators
EMPIRE MACHINERY
Caterpillar CATBKT390D_47, Construction
12,500 
Caterpillar CATBKT390D_47, Construction
- bucket
KELLY TRACTOR CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.