AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

570-1985 KIT-HYDRAULIC CYLINDER S/N BYP1-UP PART OF 570-1981 CYLINDER GP-STICK AN ATTACHMENT 390D EXCAVATOR


HYDRAULIC SYSTEM
CYLINDER GP
OPERATOR STATION
CONTROL GP-HYDRAULIC
HYDRAULIC SYSTEM
LINES GP-AUXILIARY
LINES GP-BOOM

EXCAVATOR 390D EXCAVATOR BYP
 390D Excavator BYP00001-UP (MACHINE) POWERED BY C18 Engine SEBP5615 390D BYP   (2010)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-STICK
365-3312 CYLINDER GP-STICK
CYLINDER GP-STICK
570-1981 CYLINDER GP-STICK
570-1985 KIT-HYDRAULIC CYLINDER
 

#SEBP56150510
 

570-1985: KIT-HYDRAULIC CYLINDER

570-1985 KIT-HYDRAULIC CYLINDER
S/N BYP1-UP
PART OF 570-1981 CYLINDER GP-STICK
AN ATTACHMENT
i07776834 SEBP5615
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  155-9157 [2] RING  
  173-3414 [1] RING  
  365-9197 [2] RING-BACKUP  
  514-6719 [1] RING-BACKUP  
  116-3519 [1] RING-SEAL  
  570-1984 [1] RING-WEAR  
  8C-9182 [1] SEAL AS  
  367-3934 [1] SEAL-BUFFER  
  8C-4893 [1] SEAL-HEAD (211.58-MM ID)  
  514-6718 [1] SEAL-LIP TYPE  
  365-9196 [1] SEAL-O-RING  
  367-3961 [1] SEAL-U-CUP  
 

#SEBP56150511
 

234-6613: LEVER GP-CONTROL

234-6613 LEVER GP-CONTROL -HYDRAULIC LOCKOUT
S/N BYP1-UP
PART OF 421-1434 CONSOLE GP-OPERATOR
i02111038 SEBP5615
2346613 LEVER GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
3. 111-4799 [1] SWITCH AS-LIMIT (NEUTRAL START)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  5P-5998 D TUBE (0.3-M)  
4. 185-8286 M [2] SCREW-MACHINE (M4X0.7X8-MM)  
5. 234-6615 [1] KNOB  
6. 087-4683 [2] LOCKWASHER  
7. 120-9027 M [2] SCREW-PAN HEAD (M3X0.5X16-MM)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP56150512
 

352-6790: LINES GP-AUXILIARY HYDRAULIC

352-6790 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N BYP1-UP
HB-FAMILY
FOR USE WITH 5.5-M (18-FT) STICK
AN ATTACHMENT
i03909980 SEBP5615
3526790 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 292-7752 [2] VALVE AS-MANUAL (AUXILIARY, SHUTOFF)  
2. 302-9217 [2] TUBE AS  
3. 306-1355 [8] CLAMP-HALF  
4. 350-4085 I [2] HOSE AS  
5. 100-4982 M [8] BOLT-SELF-LOCKING (M16X2X45-MM)  
6. 1P-3705 [6] SEAL-RECTANGULAR  
7. 5P-8077 [8] FLANGE-HALF  
8. 7X-2557 M [4] BOLT (M16X2X140-MM)  
9. 8T-4140 M [16] BOLT (M16X2X60-MM)  
10. 8T-4193 M [8] BOLT (M16X2X50-MM)  
11. 9X-8257 [36] WASHER (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP56150513
 

352-6791: LINES GP-AUXILIARY HYDRAULIC

352-6791 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N BYP1-UP
HB-FAMILY
FOR USE WITH 4.4-M (14.4-FT) STICK
AN ATTACHMENT
i03909977 SEBP5615
3526791 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 292-7752 [2] VALVE AS-MANUAL (AUXILIARY, SHUTOFF)  
2. 302-9216 [2] TUBE AS  
3. 306-1355 [8] CLAMP-HALF  
4. 350-4084 I [2] HOSE AS  
5. 100-4982 M [8] BOLT-SELF-LOCKING (M16X2X45-MM)  
6. 1P-3705 [6] SEAL-RECTANGULAR  
7. 5P-8077 [8] FLANGE-HALF  
8. 7X-2557 M [4] BOLT (M16X2X140-MM)  
9. 8T-4140 M [16] BOLT (M16X2X60-MM)  
10. 8T-4193 M [8] BOLT (M16X2X50-MM)  
11. 9X-8257 [36] WASHER (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP56150514
 

352-6793: LINES GP-AUXILIARY HYDRAULIC

352-6793 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N BYP1-UP
JB-FAMILY
FOR USE WITH 3.4-M (11.2-FT) STICK
AN ATTACHMENT
i03909941 SEBP5615
3526793 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 292-7752 [2] VALVE AS-MANUAL (AUXILIARY, SHUTOFF)  
2. 302-9219 [2] TUBE AS  
3. 306-1355 [8] CLAMP-HALF  
4. 350-4082 I [2] HOSE AS  
5. 100-4982 M [8] BOLT-SELF-LOCKING (M16X2X45-MM)  
6. 1P-3705 [6] SEAL-RECTANGULAR  
7. 5P-8077 [8] FLANGE-HALF  
8. 7X-2557 M [4] BOLT (M16X2X140-MM)  
9. 8T-4140 M [16] BOLT (M16X2X60-MM)  
10. 8T-4193 M [8] BOLT (M16X2X50-MM)  
11. 9X-8257 [36] WASHER (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP56150515
 

352-6794: LINES GP-AUXILIARY HYDRAULIC

352-6794 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N BYP1-UP
JB-FAMILY
FOR USE WITH 2.92-M (9.6-FT) STICK
AN ATTACHMENT
i03909936 SEBP5615
3526794 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 292-7752 [2] VALVE AS-MANUAL (AUXILIARY, SHUTOFF)  
2. 302-9218 [2] TUBE AS  
3. 306-1355 [4] CLAMP-HALF  
4. 338-6209 I [2] HOSE AS  
5. 100-4982 M [4] BOLT-SELF-LOCKING (M16X2X45-MM)  
6. 1P-3705 [6] SEAL-RECTANGULAR  
7. 5P-8077 [8] FLANGE-HALF  
8. 7X-2557 M [4] BOLT (M16X2X140-MM)  
9. 8T-4140 M [16] BOLT (M16X2X60-MM)  
10. 8T-4193 M [8] BOLT (M16X2X50-MM)  
11. 9X-8257 [32] WASHER (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP56150516
 

330-2409: LINES GP-BOOM

330-2409 LINES GP-BOOM
S/N BYP1-UP
PART OF 303-2688 BOOM AR-REACH
AN ATTACHMENT
i03907922 SEBP5615
3302409 LINES GP-BOOM Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6H-3615 [5] PLUG-PROTECTION  
2. 9F-2167 [5] SCREW-PURGE (3/8-24X1.164-IN)  
3. 138-5708 [50] CLIP-HALF  
4. 138-5709 [25] GROMMET  
5. 317-4855 [3] TUBE AS  
6. 333-4594 [1] PLATE  
7. 333-7054 I [2] HOSE AS  
8. 333-7055 I [1] HOSE AS  
9. 353-0792 [1] TUBE GP-HYDRAULIC  
  1P-3706 [1] SEAL-RECTANGULAR  
  8T-4193 M [4] BOLT (M16X2X50-MM)  
  9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
10. 353-0793 [1] TUBE GP-HYDRAULIC  
  1P-3706 [1] SEAL-RECTANGULAR  
  8T-4193 M [4] BOLT (M16X2X50-MM)  
  9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
11. 353-0794 [3] TUBE AS  
12. 353-0795 [2] TUBE GP-HYDRAULIC  
    (EACH INCLUDES)
  1P-3706 [1] SEAL-RECTANGULAR  
  8T-4193 M [4] BOLT (M16X2X50-MM)  
  9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
13. 353-0796 [1] TUBE AS  
14. 353-0797 [1] TUBE AS  
15. 170-8555 M [10] BOLT (M16X2X90-MM)  
16. 1P-3705 [13] SEAL-RECTANGULAR  
17. 1P-3706 [7] SEAL-RECTANGULAR  
18. 5P-0049 [7] COVER  
19. 5P-8077 [26] FLANGE-HALF  
20. 7X-2554 M [42] BOLT (M16X2X70-MM)  
21. 8T-4132 M [10] NUT (M16X2-THD)  
22. 8T-4140 M [50] BOLT (M16X2X60-MM)  
23. 8T-4193 M [28] BOLT (M16X2X50-MM)  
24. 9X-8257 [140] WASHER (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP56150517
 

338-6164: LINES GP-BOOM

338-6164 LINES GP-BOOM
S/N BYP1-UP
PART OF 303-2689 BOOM AR
AN ATTACHMENT
i03907931 SEBP5615
3386164 LINES GP-BOOM Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6H-3615 [5] PLUG-PROTECTION  
2. 9F-2167 [5] SCREW-PURGE (3/8-24X1.164-IN)  
3. 138-5708 [46] CLIP-HALF  
4. 138-5709 [23] GROMMET  
5. 317-4890 [3] TUBE AS  
6. 317-4891 [2] TUBE AS  
7. 333-4590 [1] TUBE AS  
8. 333-4591 [1] TUBE AS  
9. 333-4592 [1] TUBE AS  
10. 333-4593 [1] TUBE AS  
11. 333-4594 [1] PLATE  
12. 333-7054 I [2] HOSE AS  
13. 333-7055 I [1] HOSE AS  
14. 170-8555 M [10] BOLT (M16X2X90-MM)  
15. 1P-3705 [13] SEAL-RECTANGULAR  
16. 1P-3706 [4] SEAL-RECTANGULAR  
17. 5P-0049 [7] COVER  
18. 5P-8077 [26] FLANGE-HALF  
19. 7X-2554 M [38] BOLT (M16X2X70-MM)  
20. 8T-4132 M [10] NUT (M16X2-THD)  
21. 8T-4140 M [50] BOLT (M16X2X60-MM)  
22. 8T-4193 M [16] BOLT (M16X2X50-MM)  
23. 9X-8257 [124] WASHER (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP56150518
 

338-6165: LINES GP-BOOM

338-6165 LINES GP-BOOM
S/N BYP1-UP
PART OF 303-2690 BOOM AR-MASS
AN ATTACHMENT
i03907992 SEBP5615
3386165 LINES GP-BOOM Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9F-2167 [5] SCREW-PURGE (3/8-24X1.164-IN)  
2. 138-5709 [18] GROMMET  
3. 317-4860 [3] TUBE AS  
4. 333-4594 [1] PLATE  
5. 333-4604 [2] TUBE AS  
6. 333-4605 [1] TUBE AS  
7. 333-4606 [1] TUBE AS  
8. 333-7056 I [2] HOSE AS  
9. 333-7192 I [1] HOSE AS  
10. 8T-4140 M [50] BOLT (M16X2X60-MM)  
11. 9X-8257 [106] WASHER (17.5X30X3.5-MM THK)  
12. 8T-4132 M [10] NUT (M16X2-THD)  
13. 8T-4193 M [8] BOLT (M16X2X50-MM)  
14. 7X-2554 M [28] BOLT (M16X2X70-MM)  
15. 170-8555 M [10] BOLT (M16X2X90-MM)  
16. 138-5708 [36] CLIP-HALF  
17. 1P-3705 [13] SEAL-RECTANGULAR  
18. 1P-3706 [2] SEAL-RECTANGULAR  
19. 5P-8077 [26] FLANGE-HALF  
20. 6H-3615 [5] PLUG-PROTECTION  
21. 5P-0049 [7] COVER  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP56150519
 

374-0032: LINES GP-BOOM

374-0032 LINES GP-BOOM
S/N BYP1-UP
PART OF 303-2689 BOOM AR
Type 1
AN ATTACHMENT
i05537984 SEBP5615
3740032 LINES GP-BOOM Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9F-2167 [5] SCREW-PURGE (3/8-24X1.164-IN)  
2. 138-5709 [23] GROMMET  
3. 317-4890 [3] TUBE AS  
4. 317-4891 [2] TUBE AS  
5. 333-4590 [1] TUBE AS  
6. 333-4591 [1] TUBE AS  
7. 333-4592 [1] TUBE AS  
8. 333-4593 [1] TUBE AS  
9. 333-4594 [1] PLATE  
10. 354-3803 I [2] HOSE AS  
11. 354-3837 I [1] HOSE AS  
12. 138-5708 [46] CLIP-HALF  
13. 453-4135 M [10] BOLT (M16X2X90-MM)  
14. 1P-3705 [13] SEAL-RECTANGULAR  
15. 1P-3706 [4] SEAL-RECTANGULAR  
16. 5P-0049 [7] COVER  
17. 5P-8077 [26] FLANGE-HALF  
18. 6H-3615 [5] PLUG-PROTECTION  
19. 453-2838 M [38] BOLT (M16X2X70-MM)  
20. 451-2183 M [10] NUT (M16X2-THD)  
21. 447-1707 M [50] BOLT (M16X2X60-MM)  
22. 447-1711 M [16] BOLT (M16X2X50-MM)  
23. 451-2175 [124] WASHER-HARD (17.5X30X3.5-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
The Lip Type Seal Installed in the Cylinder Heads of the Bucket Cylinder and Stick Cylinder May Move Out of the Cylinder Head Seal Groove on 390D Excavators{5457, 5458}
The Lip Type Seal Installed in the Cylinder Heads of the Bucket Cylinder and Stick Cylinder May Move Out of the Cylinder Head Seal Groove on 390D Excavators{5457, 5458}
Stick Cylinder Rod Bending or Cracking on Certain 390D and 390F Excavators and Mobile Hydraulic Power Units {5458}
Stick Cylinder Rod Bending or Cracking on Certain 390D and 390F Excavators and Mobile Hydraulic Power Units {5458}
Stick Cylinder Rod Assembly May Bend or Crack on Certain Excavators and Mobile Hydraulic Power Units {5458}
Stick Cylinder Rod Assembly May Bend or Crack on Certain Excavators and Mobile Hydraulic Power Units {5458}
Specifications
Boom Cylinder
390D Excavator Machine System Specifications
Boom Cylinder Lines
390D Excavator Machine System Specifications
Load Control Valve (Boom)
390D Excavator Machine System Specifications
Boom Cylinder Lines
390D Excavator Machine System Specifications
Boom Lines
390D Excavator Machine System Specifications
Stick Cylinder
390D Excavator Machine System Specifications
Boom Lines
390D Excavator Machine System Specifications
Bucket Cylinder
390D Excavator Machine System Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Systems Operation
Cylinders (Boom, Stick and Bucket)
390D Excavator Hydraulic System
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Cylinder Drift - Check - Empty Bucket
390D Excavator Hydraulic System
Cylinder Drift - Check - Loaded Bucket
390D Excavator Hydraulic System
Cylinder Speed - Check
390D Excavator Hydraulic System
Relief Valve (Counterweight Cylinder) - Test and Adjust
390D Excavator Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Counterweight Cylinder - Remove
390D Excavator Machine Systems
Counterweight Cylinder - Install
390D Excavator Machine Systems
Bucket Cylinder - Remove and Install
390D Excavator Machine Systems
Cylinder Pressure Release - Boom Lowering Control Valve
390D Excavator Machine Systems
Stick Cylinder - Remove and Install
390D Excavator Machine Systems
Service Magazine
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
New Seal Kits for the Stick Cylinder is Now Used on Certain Excavators {5458}
2013/01/15
A New Boom Cylinder Group and Rod Assembly is Now Used on Certain Excavators, Material Handlers, and Mobile Hydraulic Power Units {5456}
A New Boom Cylinder Group and Rod Assembly is Now Used on Certain Excavators, Material Handlers, and Mobile Hydraulic Power Units {5456}
Improved Stick and Bucket Cylinder Rod Seals Are Now Used on Certain Excavators {5457, 5458}
Improved Stick and Bucket Cylinder Rod Seals Are Now Used on Certain Excavators {5457, 5458}

Caterpillar Parts SIS Catalog 390D :

297-0222 HYDRAULIC AR
HEAD GP-PUMP
510-2323 HEAD GP-PUMP
HEAD GP-PUMP
191-5593 HEAD GP-PUMP
GAUGE GP-SIGHT
347-6081 GAUGE GP-SIGHT
GAUGE GP-SIGHT
227-0620 GAUGE GP-SIGHT
FILTER GP-OIL
6E-5534 FILTER GP-OIL
FILTER GP-OIL
419-8528 FILTER GP-OIL
FILTER GP-OIL
250-0729 FILTER GP-OIL
LEVER GP-CONTROL
234-6613 LEVER GP-CONTROL
LINES GP-AUXILIARY HYDRAULIC
352-6790 LINES GP-AUXILIARY HYDRAULIC
LINES GP-AUXILIARY HYDRAULIC
352-6791 LINES GP-AUXILIARY HYDRAULIC
LINES GP-AUXILIARY HYDRAULIC
352-6793 LINES GP-AUXILIARY HYDRAULIC
LINES GP-AUXILIARY HYDRAULIC
352-6794 LINES GP-AUXILIARY HYDRAULIC
LINES GP-BOOM
330-2409 LINES GP-BOOM
LINES GP-BOOM
338-6164 LINES GP-BOOM
LINES GP-BOOM
338-6165 LINES GP-BOOM

Truck sale:

Caterpillar 390D
 
Caterpillar 390D
- Crawler Excavators
FINNING CANADA
Caterpillar 390D, bucket, Construction
14,264 
Caterpillar 390D, bucket, Construction
- bucket
FINNING CANADA
Caterpillar 390D, schaufel, Bau-Und Bergbauausrüstung
29.311 
Caterpillar 390D, schaufel, Bau-Und Bergbauausrüstung
- bucket
FINNING CANADA
 
387,487 
Caterpillar 390D, Construction
- Crawler Excavators
EMPIRE MACHINERY
Caterpillar CATBKT390D_47, Construction
12,500 
Caterpillar CATBKT390D_47, Construction
- bucket
KELLY TRACTOR CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.