WORK TOOLS
BUCKET GPWORK TOOLS
BUCKET GP
#SEBP56150700
331-1248: BUCKET & ADJUSTER GP
331-1248 BUCKET & ADJUSTER GP -SEVERE SERVICE ROCK, JC-FAMILY
S/N BYP1-UP
2400-MM (96-IN) WIDE X 6-CU M (7.9-CU YD) CAPACITY. J-800 ADAPTERS, QTY OF 5
PART OF 374-8290 BUCKET AR-SEVERE SERVICE SPADE
AN ATTACHMENT
S/N BYP1-UP
2400-MM (96-IN) WIDE X 6-CU M (7.9-CU YD) CAPACITY. J-800 ADAPTERS, QTY OF 5
PART OF 374-8290 BUCKET AR-SEVERE SERVICE SPADE
AN ATTACHMENT
For full view, you need register
Parts for your 390D EXCAVATOR:
CATERPILLAR SIS#SEBP56150701
331-1251: BUCKET & ADJUSTER GP
331-1251 BUCKET & ADJUSTER GP -EXTREME SERVICE ROCK, JC-FAMILY
S/N BYP1-UP
2050-MM (82-IN) WIDE X 5-CU M (6.5-CU YD) CAPACITY. J-800 ADAPTERS, QTY OF 4
AN ATTACHMENT
S/N BYP1-UP
2050-MM (82-IN) WIDE X 5-CU M (6.5-CU YD) CAPACITY. J-800 ADAPTERS, QTY OF 4
AN ATTACHMENT
For full view, you need register
Parts for your 390D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 109-9080 | [1] | EDGE-SEGMENT (CENTER) | |
| 2. | 109-9081 | [1] | EDGE-SEGMENT (LH) | |
| 3. | 305-1767 Y | [1] | ADJUSTER GP-BUCKET (JC-FAMILY) | |
| 4. | 357-2688 Y | [1] | PROTECTOR GP-SIDE BAR (JC-FAMILY) | |
| 5. | 360-6050 Y | [1] | BUCKET AS-EXTREME SERVICE ROCK (JC-FAMILY) | |
| 6. | 109-9082 | [1] | EDGE-SEGMENT (RH) | |
| 7. | 2C-9259 | [2] | PLATE-IDENTIFICATION (CAT) | |
| 8. | 3K-9770 | [9] | NUT-FULL (1-1/4-7-THD) | |
| 9. | 198-1092 | [9] | BOLT-PLOW (1-1/4-7X5.5-IN) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56150702
331-1252: BUCKET & ADJUSTER GP
331-1252 BUCKET & ADJUSTER GP -EXTREME SERVICE ROCK, JC-FAMILY
S/N BYP1-UP
2350-MM (93-IN) WIDE X 5.4-CU M (7.1-CU YD) CAPACITY. J-800 ADAPTERS, QTY OF 4
PART OF 374-8291 BUCKET AR-EXTREME SERV SPADE
AN ATTACHMENT
S/N BYP1-UP
2350-MM (93-IN) WIDE X 5.4-CU M (7.1-CU YD) CAPACITY. J-800 ADAPTERS, QTY OF 4
PART OF 374-8291 BUCKET AR-EXTREME SERV SPADE
AN ATTACHMENT
For full view, you need register
Parts for your 390D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 257-1782 | [1] | EDGE-SEGMENT (CENTER) | |
| 2. | 257-1783 | [1] | EDGE-SEGMENT (RH) | |
| 3. | 257-1784 | [1] | EDGE-SEGMENT (LH) | |
| 4. | 305-1767 Y | [1] | ADJUSTER GP-BUCKET (JC-FAMILY) | |
| 5. | 357-2688 Y | [1] | PROTECTOR GP-SIDE BAR (JC-FAMILY) | |
| 6. | 360-6051 Y | [1] | BUCKET AS-EXTREME SERV SPADE (JC-FAMILY) | |
| 7. | 2C-9259 | [2] | PLATE-IDENTIFICATION (CAT) | |
| 8. | 3K-9770 | [12] | NUT-FULL (1-1/4-7-THD) | |
| 9. | 198-1092 | [12] | BOLT-PLOW (1-1/4-7X5.5-IN) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56150703
331-1253: BUCKET & ADJUSTER GP
331-1253 BUCKET & ADJUSTER GP -SEVERE SERVICE ROCK, JC-FAMILY
S/N BYP1-UP
2300-MM (93-IN) WIDE X 5.7-CU M (7.5-CU YD) CAPACITY. J-800 ADAPTERS, QTY OF 4
AN ATTACHMENT
S/N BYP1-UP
2300-MM (93-IN) WIDE X 5.7-CU M (7.5-CU YD) CAPACITY. J-800 ADAPTERS, QTY OF 4
AN ATTACHMENT
For full view, you need register
Parts for your 390D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 257-1782 | [1] | EDGE-SEGMENT (CENTER) | |
| 2. | 257-1783 | [1] | EDGE-SEGMENT (RH) | |
| 3. | 257-1784 | [1] | EDGE-SEGMENT (LH) | |
| 4. | 305-1767 Y | [1] | ADJUSTER GP-BUCKET (JC-FAMILY) | |
| 5. | 357-2688 Y | [1] | PROTECTOR GP-SIDE BAR (JC-FAMILY) | |
| 6. | 360-6052 Y | [1] | BUCKET AS-SEVERE SERVICE ROCK (JC-FAMILY) | |
| 7. | 2C-9259 | [2] | PLATE-IDENTIFICATION (CAT) | |
| 8. | 3K-9770 | [12] | NUT-FULL (1-1/4-7-THD) | |
| 9. | 198-1092 | [12] | BOLT-PLOW (1-1/4-7X5.5-IN) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56150704
338-8622: BUCKET & ADJUSTER GP
338-8622 BUCKET & ADJUSTER GP -SEVERE SERV SPADE, JC-FAMILY
S/N BYP1-UP
2350-MM (93-IN) WIDE X 5.7-CU M (7.5-CU YD) CAPACITY. J-800 ADAPTERS, QTY OF 4
Type 1
AN ATTACHMENT
S/N BYP1-UP
2350-MM (93-IN) WIDE X 5.7-CU M (7.5-CU YD) CAPACITY. J-800 ADAPTERS, QTY OF 4
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 390D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 357-2688 Y | [1] | PROTECTOR GP-SIDE BAR (JC-FAMILY) | |
| 2. | 257-1782 | [1] | EDGE-SEGMENT (CENTER) | |
| 3. | 257-1784 | [1] | EDGE-SEGMENT (LH) | |
| 4. | 257-1783 | [1] | EDGE-SEGMENT (RH) | |
| 5. | Y | [1] | ADJUSTER GP-BUCKET (JC-FAMILY) | |
| 6. | 3K-9770 | [12] | NUT-FULL (1-1/4-7-THD) | |
| 7. | 362-7824 Y | [1] | BUCKET AS-EXTREME SERV SPADE | |
| 8. | 198-1092 | [12] | BOLT-PLOW (1-1/4-7X5.5-IN) | |
| 9. | 2C-9259 | [2] | PLATE-IDENTIFICATION (CAT) | |
| 10. | 312-5694 | [1] | SETSCREW (1/4-20X0.25-IN) | |
| 11. | 336-2651 | [1] | FLANGE | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56150705
338-8622: BUCKET & ADJUSTER GP
338-8622 BUCKET & ADJUSTER GP -SEVERE SERV SPADE, JC-FAMILY
S/N BYP1-UP
2350-MM (93-IN) WIDE X 5.7-CU M (7.5-CU YD) CAPACITY. J-800 ADAPTERS, QTY OF 4
Type 2
AN ATTACHMENT
S/N BYP1-UP
2350-MM (93-IN) WIDE X 5.7-CU M (7.5-CU YD) CAPACITY. J-800 ADAPTERS, QTY OF 4
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 390D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 357-2688 Y | [1] | PROTECTOR GP-SIDE BAR (JC-FAMILY) | |
| 2. | 257-1782 | [1] | EDGE-SEGMENT (CENTER) | |
| 3. | 257-1784 | [1] | EDGE-SEGMENT (LH) | |
| 4. | 257-1783 | [1] | EDGE-SEGMENT (RH) | |
| 5. | Y | [1] | ADJUSTER GP-BUCKET (JC-FAMILY) | |
| 6. | 3K-9770 | [12] | NUT-FULL (1-1/4-7-THD) | |
| 7. | 416-9633 CY | [1] | BUCKET AS-EXTREME SERV SPADE (JC-FAMILY) | |
| 8. | 198-1092 | [12] | BOLT-PLOW (1-1/4-7X5.5-IN) | |
| 9. | 2C-9259 | [2] | PLATE-IDENTIFICATION (CAT) | |
| 10. | 312-5694 | [1] | SETSCREW (1/4-20X0.25-IN) | |
| 11. | 336-2651 | [1] | FLANGE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56150706
339-4493: BUCKET & ADJUSTER GP
339-4493 BUCKET & ADJUSTER GP -SEVERE SERVICE ROCK, JC-FAMILY
S/N BYP1-UP
2050-MM (82-IN) WIDE X 5-CU M (6.5-CU YD) CAPACITY. J-800 ADAPTERS, QTY OF 4
AN ATTACHMENT
S/N BYP1-UP
2050-MM (82-IN) WIDE X 5-CU M (6.5-CU YD) CAPACITY. J-800 ADAPTERS, QTY OF 4
AN ATTACHMENT
For full view, you need register
Parts for your 390D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 109-9080 | [3] | EDGE-SEGMENT (CENTER) | |
| 3. | 138-0006 | [14] | RETAINER-G.E.T. | |
| 4. | 138-0032 | [14] | COVER-ADAPTER | |
| 5. | 209-9311 | [9] | BOLT-PLOW (1-1/4-7X6.5-IN) | |
| 6. | 357-2688 Y | [1] | PROTECTOR GP-SIDE BAR (JC-FAMILY) | |
| 7. | 365-5807 Y | [1] | ADJUSTER GP-BUCKET | |
| 8. | 365-5809 | [3] | PLATE-WEAR (CENTER) | |
| 9. | 365-5812 Y | [1] | BUCKET AS-SEVERE SERVICE ROCK | |
| 10. | 2C-9259 | [2] | PLATE-IDENTIFICATION (CAT) | |
| 12. | 3K-9770 | [9] | NUT-FULL (1-1/4-7-THD) | |
| 13. | 5P-8362 | [9] | NUT (1-1/4-7-THD) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56150707
339-4494: BUCKET & ADJUSTER GP
339-4494 BUCKET & ADJUSTER GP -JC-FAMILY, EXTREME SERVICE ROCK
S/N BYP1-UP
2050-MM (82-IN) WIDE X 5-CU M (6.5-CU YD) CAPACITY. J-800 ADAPTERS, QTY OF 4
AN ATTACHMENT
S/N BYP1-UP
2050-MM (82-IN) WIDE X 5-CU M (6.5-CU YD) CAPACITY. J-800 ADAPTERS, QTY OF 4
AN ATTACHMENT
For full view, you need register
Parts for your 390D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 109-9080 | [1] | EDGE-SEGMENT (CENTER) | |
| 2. | 109-9081 | [1] | EDGE-SEGMENT (LH) | |
| 4. | 138-0006 | [14] | RETAINER-G.E.T. | |
| 5. | 138-0032 | [14] | COVER-ADAPTER | |
| 6. | 209-9311 | [9] | BOLT-PLOW (1-1/4-7X6.5-IN) | |
| 7. | 357-2688 Y | [1] | PROTECTOR GP-SIDE BAR (JC-FAMILY) | |
| 8. | 365-5807 Y | [1] | ADJUSTER GP-BUCKET | |
| 9. | 365-5809 | [1] | PLATE-WEAR (CENTER) | |
| 10. | 365-5810 | [1] | PLATE-WEAR (LH) | |
| 11. | 365-5811 | [1] | PLATE-WEAR (RH) | |
| 12. | 365-5813 Y | [1] | BUCKET AS-EXTREME SERVICE ROCK | |
| 13. | 109-9082 | [1] | EDGE-SEGMENT (RH) | |
| 14. | 2C-9259 | [2] | PLATE-IDENTIFICATION (CAT) | |
| 16. | 3K-9770 | [9] | NUT-FULL (1-1/4-7-THD) | |
| 17. | 5P-8362 | [9] | NUT (1-1/4-7-THD) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56150708
341-8649: BUCKET & ADJUSTER GP
341-8649 BUCKET & ADJUSTER GP -GENERAL PURPOSE, HB2-FAMILY
S/N BYP1-UP
1100-MM (43-IN) WIDE X 2.2-CU M (2.8-CU YD) CAPACITY. K-150 ADAPTERS, QTY OF 3
AN ATTACHMENT
S/N BYP1-UP
1100-MM (43-IN) WIDE X 2.2-CU M (2.8-CU YD) CAPACITY. K-150 ADAPTERS, QTY OF 3
AN ATTACHMENT
For full view, you need register
Parts for your 390D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7Y-3477 Y | [1] | ADJUSTER GP-BUCKET (UB/WB/HB/JB-FAMILY) | ||
| 350-0491 Y | [1] | BUCKET AS-GENERAL PURPOSE | ||
| -OR- | ||||
| 485-8622 Y | [1] | BUCKET AS-GENERAL PURPOSE | ||
| 2C-9259 | [2] | PLATE-IDENTIFICATION (CAT) | ||
| (ON LH & RH SIDES OF BUCKET) | ||||
| 312-5694 | [1] | SETSCREW (1/4-20X0.25-IN) | ||
| (USE TO MOUNT BUCKET INFORMATION PLATE) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56150709
341-8650: BUCKET & ADJUSTER GP
341-8650 BUCKET & ADJUSTER GP -GENERAL PURPOSE, HB2-FAMILY
S/N BYP1-UP
1350-MM (54-IN) WIDE X 2.9-CU M (3.8-CU YD) CAPACITY. K-150 ADAPTERS, QTY OF 5
AN ATTACHMENT
S/N BYP1-UP
1350-MM (54-IN) WIDE X 2.9-CU M (3.8-CU YD) CAPACITY. K-150 ADAPTERS, QTY OF 5
AN ATTACHMENT
For full view, you need register
Parts for your 390D EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 7Y-3477 Y | [1] | ADJUSTER GP-BUCKET (UB/WB/HB/JB-FAMILY) | ||
| Y | [1] | BUCKET AS-GENERAL PURPOSE | ||
| -OR- | ||||
| 485-8629 Y | [1] | BUCKET AS-GENERAL PURPOSE (HB2-FAMILY) | ||
| 2C-9259 | [2] | PLATE-IDENTIFICATION (CAT) | ||
| (ON LH & RH SIDES OF BUCKET) | ||||
| 312-5694 | [1] | SETSCREW (1/4-20X0.25-IN) | ||
| (USE TO MOUNT BUCKET INFORMATION PLATE) | ||||
| Y | SEPARATE ILLUSTRATION | |||
Information:
WORK TOOLS
BUCKET GP
Operation and Maintenance Manual
Special Instruction
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Installation of Cutting Edge on SD and XD Buckets for Certain 390D Excavators{6503}
Installation of Cutting Edge on SD and XD Buckets for Certain 390D Excavators{6503}
Installation of Cutting Edge on SD and XD Buckets for Certain 390D Excavators{6503}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Procedure for Installation and Removal of Cat<SUP>®</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>®</SUP> Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Specifications
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Disassembly and Assembly
Service Magazine
Improved Rock Bucket and Adjuster Groups Are Used with Certain 390D Excavators {0679, 6001, 6513}
2012/07/16
2012/07/16
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
