AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

356-0663 CYLINDER GP-BOOM S/N KCZ1-UP 210-MM (8.3-IN) BORE X 1967-MM (77.4-IN) STROKE PART OF 356-0664 CYLINDER & SEAL GP-BOOM AN ATTACHMENT 390D


HYDRAULIC SYSTEM
CYLINDER GP

EXCAVATOR 390D EXCAVATOR KCZ
 390D Excavator KCZ00001-UP (MACHINE) POWERED BY C18 Engine SEBP5616 390D KCZ   (2010)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BOOM
353-9616 CYLINDER GP-BOOM
CYLINDER GP-BOOM
353-9616 CYLINDER GP-BOOM
CYLINDER GP-BOOM
356-0663 CYLINDER GP-BOOM
CYLINDER GP-BOOM
362-9780 CYLINDER GP-BOOM
CYLINDER GP-BUCKET
354-6071 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
361-2862 CYLINDER GP-BUCKET
 

#SEBP56160510
 

356-0663: CYLINDER GP-BOOM

356-0663 CYLINDER GP-BOOM
S/N KCZ1-UP
210-MM (8.3-IN) BORE X 1967-MM (77.4-IN) STROKE
PART OF 356-0664 CYLINDER & SEAL GP-BOOM
AN ATTACHMENT
i03958109 SEBP5616
3560663 CYLINDER GP-BOOM Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-3377 [1] WEDGE-RECEPTACLE LOCK (4-PIN)  
2. 8T-8737 [1] PLUG-SEAL  
3. 102-2244 [1] GROMMET  
4. 155-9095 [1] STOP  
5. 155-9096 J [1] RING-SEAL  
6. 155-9097 [1] HEAD  
7. 155-9099 [1] RING-RETAINING  
8. 165-9295 J [1] SEAL-LIP TYPE  
9. 170-9852 J [1] SEAL-BUFFER  
10. 172-3918 J [1] SEAL AS  
11. 212-0907 [1] PLATE-CONNECTOR  
12. 214-1639 [1] MAGNET  
13. 217-8763 [1] COVER-PROTECTION  
14. 243-3177 [1] RETAINER  
15. [1] SENSOR GP-POSITION  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
16. 331-9341 [1] PISTON  
17. 331-9344 [1] ROD AS  
17A. 172-2997 [1] BUSHING  
18. 356-0662 [1] CYLINDER AS  
18A. 244-4258 [1] BUSHING  
19. 095-1280 M [2] SETSCREW-SOCKET (M16X2X20-MM)  
20. 095-1732 J [1] SEAL-O-RING  
21. 155-9093 J [2] RING  
22. 155-9094 J [1] RING  
23. 155-9098 J [1] RING-BACKUP  
24. 155-9100 [1] BUSHING  
25. 155-9103 J [1] RING-BACKUP  
26. 188-2199 [1] SEAL-O-RING  
27. 215-1942 [1] RING-BACKUP  
28. 216-0010 J [1] SEAL-U-CUP  
29. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
30. 3V-2431 [2] WASHER (10.2X16X2-MM THK)  
31. 6V-8223 M [1] SETSCREW-SOCKET (M10X1.5X16-MM)  
32. 7X-2489 M [11] BOLT (M24X3X100-MM)  
33. 8T-4167 [11] WASHER-HARD (26X44X4-MM THK)  
34. 8T-8894 M [2] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
35. 9X-1386 E SLEEVE (20-CM)  
   
    AVAILABLE REPAIR KIT(S):
  215-9999 J [1] KIT-SEAL (BOOM CYLINDER)  
   
  E   ORDER BY THE CENTIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP56160511
 

362-9780: CYLINDER GP-BOOM

362-9780 CYLINDER GP-BOOM
S/N KCZ1-UP
210-MM (8.3-IN) BORE X 1967-MM (77.4-IN) STROKE
PART OF 362-6003 CYLINDER & SEAL GP-BOOM
FIELD REPLACEMENT FOR @@@@@353-9616@@@@@
AN ATTACHMENT
i05736763 SEBP5616
3629780 CYLINDER GP-BOOM Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5M-6214 [1] PLUG (1/8-27 PTF)  
2. 8T-6757 [2] PLUG-PIPE  
3. 8T-8382 J [1] SEAL-HEAD  
4. 155-9093 J [2] RING  
5. 155-9094 J [1] RING  
6. 155-9096 J [1] RING-SEAL  
7. 155-9099 [1] RING-RETAINING  
8. 155-9103 J [1] RING-BACKUP  
9. 165-9295 J [1] SEAL-LIP TYPE  
10. 172-3918 J [1] SEAL AS  
11. 353-9617 [1] CYLINDER AS  
11A. 244-4258 [1] BUSHING  
12. 358-5990 J [1] SEAL-O-RING  
13. 365-2911 J [2] RING-BACKUP  
14. 367-3932 J [1] SEAL-BUFFER  
15. 367-3933 J [1] SEAL-U-CUP  
16. 383-8636 [1] STOP  
17. 420-8988 [1] ROD AS  
17A. 172-2997 [1] BUSHING  
18. 423-8109 [1] HEAD  
19. 433-5663 [1] PISTON  
20. 155-9100 [1] BUSHING  
21. 173-9684 M [11] BOLT (M24X3X100-MM)  
22. 188-4192 [1] LOCKNUT-SPECIAL  
23. 6V-8237 [11] WASHER (26X44X4-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  370-1871 J [1] KIT-SEAL (BOOM CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP56160512
 

354-6071: CYLINDER GP-BUCKET

354-6071 CYLINDER GP-BUCKET
S/N KCZ1-UP
200-MM (7.9-IN) BORE X 1451-MM (57.2-IN) STROKE
PART OF 354-6070 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT
i03929071 SEBP5616
3546071 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 354-6072 [1] CYLINDER AS  
1A. 198-5529 [1] BUSHING  
2. 315-3319 [1] ROD AS  
2A. 6E-0813 [1] BUSHING  
3. 300-9672 [1] PISTON  
4. 147-5776 J [1] RING  
5. 147-5738 J [2] RING  
6. 8C-9179 J [1] SEAL AS  
7. 6V-8223 M [1] SETSCREW-SOCKET (M10X1.5X16-MM)  
8. 209-6026 [1] HEAD  
9. 4I-6330 J [1] RING-BACKUP  
10. 095-1731 J [1] SEAL-O-RING  
11. 128-9261 [1] BUSHING  
12. 102-0786 [1] RING-RETAINING  
13. 216-0009 J [1] SEAL-U-CUP  
14. 147-5771 J [1] RING-BACKUP  
15. 165-9294 J [1] SEAL-LIP TYPE  
16. 095-1280 M [2] SETSCREW-SOCKET (M16X2X20-MM)  
17. 9X-8258 [11] WASHER (33X56X6-MM THK)  
18. 9X-6618 M [11] BOLT (M30X3.5X130-MM)  
19. 214-1639 [1] MAGNET  
20. 243-3177 [1] RETAINER  
21. 300-8784 [1] SENSOR GP-POSITION  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
22. 102-2244 [1] GROMMET  
23. 212-0907 [1] PLATE-CONNECTOR  
24. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
25. 3E-3377 [1] WEDGE-RECEPTACLE LOCK (4-PIN)  
26. 217-8763 [1] COVER-PROTECTION  
27. 3V-2431 [2] WASHER (10.2X16X2-MM THK)  
28. 8T-8894 M [2] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
29. 215-1942 [1] RING-BACKUP  
30. 188-2199 [1] SEAL-O-RING  
31. 8T-8737 [1] PLUG-SEAL  
32. 170-9851 J [1] SEAL-BUFFER  
33. 9X-1386 E SLEEVE (20-CM)  
   
    AVAILABLE REPAIR KIT(S):
  215-9995 J [1] KIT-SEAL (BUCKET CYLINDER)  
  E   ORDER BY THE CENTIMETER
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP56160513
 

361-2862: CYLINDER GP-BUCKET

361-2862 CYLINDER GP-BUCKET
S/N KCZ1-UP
220-MM (8.7-IN) BORE X 1586-MM (62.4-IN) STROKE
PART OF 361-2898 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT
i03983449 SEBP5616
3612862 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-3516 M [1] NUT-SELF LOCKING (M120X2-THD)  
2. 165-9296 J [1] SEAL-LIP TYPE  
3. 367-3934 J [1] SEAL-BUFFER  
4. 421-1899 [1] HEAD  
5. 433-5664 [1] PISTON  
6. 361-2827 [1] CYLINDER AS  
6A. 172-2848 [1] BUSHING  
7. 361-2830 [1] ROD AS-HYDRAULIC CYLINDER  
7A. 308-8824 [1] BUSHING  
8. 095-1733 J [1] SEAL-O-RING  
9. 103-8364 [1] RING-RETAINING  
10. 128-9262 [1] BUSHING  
11. 155-9157 J [2] RING  
12. 173-3414 J [1] RING  
13. 215-9864 J [1] RING-BACKUP  
14. 367-3961 J [1] SEAL-U-CUP  
15. 4I-6442 J [1] RING-BACKUP  
16. 8C-9182 J [1] SEAL AS  
17. 177-9754 M [12] BOLT (M30X3.5X130-MM)  
18. 9X-8399 [12] WASHER (33X56X6-MM THK)  
19. 8T-6757 [1] PLUG-PIPE  
20. 5M-6213 [1] PLUG-PIPE (1/4-18-THD)  
   
    AVAILABLE REPAIR KIT(S):
  370-1869 J [1] KIT-SEAL (BUCKET CYLINDER)  
    (ALSO INCLUDES SEAL RING)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP56160514
 

361-3321: CYLINDER GP-BUCKET

361-3321 CYLINDER GP-BUCKET
S/N KCZ1-UP
200-MM (7.9-IN) BORE X 1451-MM (57.1-IN) STROKE
PART OF 361-3322 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT
i03983354 SEBP5616
3613321 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 361-3318 [1] CYLINDER AS  
1A. 198-5529 BUSHING  
2. 361-3320 [1] ROD AS  
2A. 6E-0813 [1] BUSHING  
3. 424-2919 [1] HEAD  
4. 433-5662 [1] PISTON  
5. 147-5776 J [1] RING  
6. 147-5738 J [2] RING  
7. 8C-9179 J [1] SEAL AS  
8. 095-1731 J [1] SEAL-O-RING  
9. 4I-6330 J [1] RING-BACKUP  
10. 128-9261 [1] BUSHING  
11. 102-0786 [1] RING-RETAINING  
12. 367-3928 J [1] SEAL-BUFFER  
13. 367-3929 J [1] SEAL-U-CUP  
14. 147-5771 J [1] RING-BACKUP  
15. 165-9294 J [1] SEAL-LIP TYPE  
16. 9X-8399 [11] WASHER (33X56X6-MM THK)  
17. 177-9754 M [11] BOLT (M30X3.5X130-MM)  
18. 116-3513 M [1] LOCKNUT-NYLON (M105X2-THD)  
19. 5M-6213 [1] PLUG-PIPE (1/4-18-THD)  
20. 8T-6757 [1] PLUG-PIPE  
   
    AVAILABLE REPAIR KIT(S):
  370-1940 J [1] KIT-SEAL  
    (ALSO INCLUDES SEAL RING)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP56160515
 

362-4589: CYLINDER GP-BUCKET

362-4589 CYLINDER GP-BUCKET
S/N KCZ1-UP
220-MM (8.7-IN) BORE X 1586-MM (62.4-IN) STROKE. JB-FAMILY
PART OF 362-6002 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT
i05735763 SEBP5616
3624589 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 362-4564 [1] CYLINDER AS-HYDRAULIC  
1A. 172-2848 [1] BUSHING  
2. 361-2830 [1] ROD AS-HYDRAULIC CYLINDER  
2A. 308-8824 [1] BUSHING  
3. 421-1899 [1] HEAD  
4. 433-5664 [1] PISTON  
5. 116-3516 JM [1] NUT-SELF LOCKING (M120X2-THD)  
6. 155-9157 J [2] RING  
7. 514-6718 J [1] SEAL-LIP TYPE  
8. 367-3934 J [1] SEAL-BUFFER  
9. 173-3414 J [1] RING  
10. 095-1733 J [1] SEAL-O-RING  
11. 103-8364 [1] RING-RETAINING  
12. 128-9262 [1] BUSHING  
13. 367-3961 J [1] SEAL-U-CUP  
14. 514-6719 J [1] RING-BACKUP  
15. 4I-6442 J [1] RING-BACKUP  
16. 8C-9182 J [1] SEAL AS  
17. 9X-8399 [12] WASHER (33X56X6-MM THK)  
18. 177-9754 M [12] BOLT (M30X3.5X130-MM)  
19. 5M-6213 [1] PLUG-PIPE (1/4-18-THD)  
20. 8T-6757 [1] PLUG-PIPE  
   
    AVAILABLE REPAIR KIT(S):
  519-1485 J [1] KIT-SEAL (BUCKET CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP56160516
 

362-5365: CYLINDER GP-BUCKET

362-5365 CYLINDER GP-BUCKET
S/N KCZ1-UP
200-MM (7.87-IN) BORE X 1451-MM (57.13-IN) STROKE
PART OF 362-6004 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT
i05738696 SEBP5616
3625365 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 362-4928 [1] CYLINDER AS-HYDRAULIC  
1A. 198-5529 BUSHING  
2. 361-3320 [1] ROD AS  
2A. 6E-0813 [1] BUSHING  
3. 424-2919 [1] HEAD  
4. 433-5662 [1] PISTON  
5. 147-5776 J [1] RING  
6. 147-5738 J [2] RING  
7. 8C-9179 J [1] SEAL AS  
8. 095-1731 J [1] SEAL-O-RING  
9. 4I-6330 J [1] RING-BACKUP  
10. 128-9261 [1] BUSHING  
11. 102-0786 [1] RING-RETAINING  
12. 367-3928 J [1] SEAL-BUFFER  
13. 367-3929 J [1] SEAL-U-CUP  
14. 147-5771 J [1] RING-BACKUP  
15. 165-9294 J [1] SEAL-LIP TYPE  
16. 9X-8399 [11] WASHER (33X56X6-MM THK)  
17. 177-9754 M [11] BOLT (M30X3.5X130-MM)  
18. 116-3513 M [1] LOCKNUT-NYLON (M105X2-THD)  
19. 5M-6213 [1] PLUG-PIPE (1/4-18-THD)  
20. 8T-6757 [1] PLUG-PIPE  
   
    AVAILABLE REPAIR KIT(S):
  370-1940 J [1] KIT-SEAL (BUCKET)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP56160517
 

570-1989: CYLINDER GP-BUCKET

570-1989 CYLINDER GP-BUCKET
S/N KCZ1-UP
220-MM (8.7-IN) BORE X 1586-MM (62.4-IN) STROKE
PART OF 362-6002 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT
i07635867 SEBP5616
5701989 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-6442 J [1] RING-BACKUP  
2. 8C-9182 J [1] SEAL AS  
3. 9X-8399 [12] WASHER (33X56X6-MM THK)  
4. 103-8364 [1] RING-RETAINING  
5. 116-3516 M [1] NUT-SELF LOCKING (M120X2-THD)  
6. 128-9262 [1] BUSHING  
7. 155-9157 J [2] RING  
8. 173-3414 J [1] RING  
9. 362-4564 [1] CYLINDER AS-HYDRAULIC  
10. 367-3934 J [1] SEAL-BUFFER  
11. 367-3961 J [1] SEAL-U-CUP  
12. 421-1899 [1] HEAD  
13. 433-5664 [1] PISTON  
14. 514-6718 J [1] SEAL-LIP TYPE  
15. 514-6719 J [1] RING-BACKUP  
16. 095-1733 J [1] SEAL-O-RING  
17. 177-9754 M [12] BOLT (M30X3.5X130-MM)  
18. 570-1990 [1] ROD AS  
18A. 308-8824 [1] BUSHING  
   
    AVAILABLE REPAIR KIT(S):
  519-1485 J [1] KIT-SEAL (BUCKET CYLINDER)  
    (ALSO INCLUDES BACK-UP RING)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP56160518
 

155-9196: CYLINDER GP-COUNTERWEIGHT

155-9196 CYLINDER GP-COUNTERWEIGHT
S/N KCZ1-UP
PART OF 294-1295 COUNTERWEIGHT AR
AN ATTACHMENT
i01701089 SEBP5616
1559196 CYLINDER GP-COUNTERWEIGHT Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-9197 Y [1] CYLINDER GP-COUNTERWEIGHT  
2. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
3. 7X-4803 [2] SEAL-LIP TYPE  
4. 096-0854 [2] SEAL-LIP TYPE  
5. 3B-8485 [1] ELBOW  
  Y   SEPARATE ILLUSTRATION
 

#SEBP56160519
 

155-9197: CYLINDER GP-COUNTERWEIGHT

155-9197 CYLINDER GP-COUNTERWEIGHT
S/N KCZ1-UP
150-MM (5.9-IN) BORE X 940-MM (37-IN) STROKE
PART OF 155-9196 CYLINDER GP-COUNTERWEIGHT
AN ATTACHMENT
i01701091 SEBP5616
1559197 CYLINDER GP-COUNTERWEIGHT Parts scheme
  For full view, you need register

Parts for your 390D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 188-4224 [1] CYLINDER AS  
1A. 7Y-4666 [1] BUSHING  
2. 7Y-4695 M [1] LOCKNUT (M80X2-THD)  
3. 188-4217 J [2] RING  
4. 9X-3601 J [1] SEAL AS  
5. 188-4218 J [1] RING  
6. 188-4216 [1] PISTON  
7. 095-1633 J [1] SEAL-O-RING  
8. 7Y-4673 J [1] RING-BACKUP  
9. 358-8524 [1] HEAD  
10. 7Y-5215 M [8] BOLT-SOCKET HEAD (M24X3X90-MM)  
11. 173-3363 [1] ROD AS  
11A. 7Y-5102 [1] BUSHING  
12. 7Y-4672 [1] RING-RETAINING  
13. 114-0760 [1] BUSHING  
14. 128-9265 J [1] SEAL-BUFFER  
15. 170-9864 J [1] SEAL-U-CUP  
16. 7Y-4669 J [1] RING-BACKUP  
17. 165-9290 J [1] SEAL-LIP TYPE  
   
    AVAILABLE REPAIR KIT(S):
  191-5619 J [1] KIT-SEAL (COUNTERWEIGHT CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
The Lip Type Seal Installed in the Cylinder Heads of the Bucket Cylinder and Stick Cylinder May Move Out of the Cylinder Head Seal Groove on 390D Excavators{5457, 5458}
The Lip Type Seal Installed in the Cylinder Heads of the Bucket Cylinder and Stick Cylinder May Move Out of the Cylinder Head Seal Groove on 390D Excavators{5457, 5458}
Bucket Cylinder Rods are Breaking on Certain 390D, 390L, and 390F Excavators {5457}
Bucket Cylinder Rods are Breaking on Certain 390D, 390L, and 390F Excavators {5457}
Stick Cylinder Rod Bending or Cracking on Certain 390D and 390F Excavators and Mobile Hydraulic Power Units {5458}
Stick Cylinder Rod Bending or Cracking on Certain 390D and 390F Excavators and Mobile Hydraulic Power Units {5458}
Stick Cylinder Rod Assembly May Bend or Crack on Certain Excavators and Mobile Hydraulic Power Units {5458}
Stick Cylinder Rod Assembly May Bend or Crack on Certain Excavators and Mobile Hydraulic Power Units {5458}
Specifications
Counterweight Cylinder
390D Excavator Machine System Specifications
Boom Cylinder
390D Excavator Machine System Specifications
Boom Cylinder Lines
390D Excavator Machine System Specifications
Load Control Valve (Boom)
390D Excavator Machine System Specifications
Boom Lines
390D Excavator Machine System Specifications
Boom Cylinder Lines
390D Excavator Machine System Specifications
Cylinder Guard
390D Excavator Machine System Specifications
Bucket Cylinder
390D Excavator Machine System Specifications
Boom Lines
390D Excavator Machine System Specifications
Stick Cylinder
390D Excavator Machine System Specifications
Boom Lines
390D Excavator Machine System Specifications
Bucket Cylinder
390D Excavator Machine System Specifications
Bucket Cylinder
390D Excavator Machine System Specifications
Bucket Cylinder
390D Excavator Machine System Specifications
Boom Cylinder
390D Excavator Machine System Specifications
Bucket Cylinder
390D Excavator Machine System Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Systems Operation
Cylinders (Boom, Stick and Bucket)
390D Excavator Hydraulic System
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Cylinder Drift - Check - Empty Bucket
390D Excavator Hydraulic System
Cylinder Drift - Check - Loaded Bucket
390D Excavator Hydraulic System
Cylinder Speed - Check
390D Excavator Hydraulic System
Relief Valve (Counterweight Cylinder) - Test and Adjust
390D Excavator Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Counterweight Cylinder - Remove
390D Excavator Machine Systems
Counterweight Cylinder - Install
390D Excavator Machine Systems
Bucket Cylinder - Remove and Install
390D Excavator Machine Systems
Cylinder Pressure Release - Boom Lowering Control Valve
390D Excavator Machine Systems
Boom Cylinder - Remove and Install
390D Excavator Machine Systems
Stick Cylinder - Remove and Install
390D Excavator Machine Systems
Service Magazine
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
New Seal Kits for the Stick Cylinder is Now Used on Certain Excavators {5458}
2013/01/15
A New Boom Cylinder Group and Rod Assembly is Now Used on Certain Excavators, Material Handlers, and Mobile Hydraulic Power Units {5456}
A New Boom Cylinder Group and Rod Assembly is Now Used on Certain Excavators, Material Handlers, and Mobile Hydraulic Power Units {5456}
Improved Stick and Bucket Cylinder Rod Seals Are Now Used on Certain Excavators {5457, 5458}
Improved Stick and Bucket Cylinder Rod Seals Are Now Used on Certain Excavators {5457, 5458}

Caterpillar Parts SIS Catalog 390D :

CYLINDER GP-BOOM
353-9616 CYLINDER GP-BOOM
CYLINDER GP-BOOM
353-9616 CYLINDER GP-BOOM
CYLINDER & SEAL GP-STICK
362-6005 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-HYDRAULIC
353-9650 CYLINDER & SEAL GP-HYDRAULIC
CYLINDER & SEAL GP-HYDRAULIC
353-9643 CYLINDER & SEAL GP-HYDRAULIC
CYLINDER & SEAL GP-HYDRAULIC
353-9643 CYLINDER & SEAL GP-HYDRAULIC
CYLINDER & SEAL GP-BUCKET
362-6004 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BUCKET
362-6002 CYLINDER & SEAL GP-BUCKET
CYLINDER GP-BOOM
362-9780 CYLINDER GP-BOOM
CYLINDER GP-BUCKET
354-6071 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
361-2862 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
361-3321 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
362-4589 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
362-5365 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
570-1989 CYLINDER GP-BUCKET
CYLINDER GP-COUNTERWEIGHT
155-9196 CYLINDER GP-COUNTERWEIGHT

Truck sale:

Caterpillar 390D
 
Caterpillar 390D
- Crawler Excavators
FINNING CANADA
Caterpillar 390D, bucket, Construction
14,264 
Caterpillar 390D, bucket, Construction
- bucket
FINNING CANADA
Caterpillar 390D, schaufel, Bau-Und Bergbauausrüstung
29.311 
Caterpillar 390D, schaufel, Bau-Und Bergbauausrüstung
- bucket
FINNING CANADA
 
387,487 
Caterpillar 390D, Construction
- Crawler Excavators
EMPIRE MACHINERY
Caterpillar CATBKT390D_47, Construction
12,500 
Caterpillar CATBKT390D_47, Construction
- bucket
KELLY TRACTOR CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.