HYDRAULIC SYSTEM
CYLINDER GPDRIVE GP
HYDRAULIC SYSTEM
CYLINDER GP#SEBP56160520
169-0776: CYLINDER GP-COUPLER
169-0776 CYLINDER GP-COUPLER
S/N KCZ1-UP
90-MM (3.5-IN) BORE X 200-MM (7.9-IN) STROKE
PART OF 169-0762 LOCK GP-QUICK COUPLER
AN ATTACHMENT
S/N KCZ1-UP
90-MM (3.5-IN) BORE X 200-MM (7.9-IN) STROKE
PART OF 169-0762 LOCK GP-QUICK COUPLER
AN ATTACHMENT
Parts for your 390D EXCAVATOR:
CATERPILLAR SIS#SEBP56160521
353-9625: CYLINDER GP-STICK
353-9625 CYLINDER GP-STICK
S/N KCZ1-UP
220-MM (8.7-IN) BORE X 2262-MM (89-IN) STROKE
PART OF 353-9643 CYLINDER & SEAL GP-HYDRAULIC
AN ATTACHMENT
S/N KCZ1-UP
220-MM (8.7-IN) BORE X 2262-MM (89-IN) STROKE
PART OF 353-9643 CYLINDER & SEAL GP-HYDRAULIC
AN ATTACHMENT
Parts for your 390D EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 116-3516 M | [1] | NUT-SELF LOCKING (M120X2-THD) | |
2. | 116-3518 | [1] | STOP | |
3. | 116-3519 J | [1] | RING-SEAL | |
4. | 165-9296 J | [1] | SEAL-LIP TYPE | |
5. | 170-9853 J | [1] | SEAL-BUFFER | |
6. | 173-3366 | [1] | HEAD | |
7. | 215-9972 | [1] | PISTON | |
8. | 317-8434 | [1] | NUT | |
9. | 317-8435 | [1] | ROD AS | |
9A. | 172-2848 | [1] | BUSHING | |
10. | 353-9626 | [1] | CYLINDER AS | |
353-9631 | [1] | CAP & BEARING AS | ||
10A. | 172-2848 | [1] | BUSHING | |
11. | 191-5704 | [1] | STOP | |
12. | 095-1733 J | [1] | SEAL-O-RING | |
13. | 103-8364 | [1] | RING-RETAINING | |
14. | 128-9262 | [1] | BUSHING | |
15. | 155-9157 J | [2] | RING | |
16. | 170-4763 M | [2] | SETSCREW-SOCKET | |
17. | 173-3414 J | [1] | RING | |
18. | 215-9864 J | [1] | RING-BACKUP | |
19. | 216-0011 J | [1] | SEAL-U-CUP | |
20. | 4I-6442 J | [1] | RING-BACKUP | |
21. | 8C-9182 J | [1] | SEAL AS | |
22. | 9X-6618 M | [12] | BOLT (M30X3.5X130-MM) | |
23. | 9X-8258 | [12] | WASHER (33X56X6-MM THK) | |
24. | 8C-4893 | [1] | SEAL-HEAD (211.58-MM ID) | |
AVAILABLE REPAIR KIT(S): | ||||
216-0000 J | [1] | KIT-SEAL (STICK CYLINDER) | ||
J | KIT MARKED J SERVICES PART(S) MARKED J | |||
M | METRIC PART |
#SEBP56160522
363-1685: CYLINDER GP-STICK
363-1685 CYLINDER GP-STICK
S/N KCZ1-UP
220-MM (8.7-IN) BORE X 2262-MM (89.1-IN) STROKE
FIELD REPLACEMENT FOR @@@@@365-3312@@@@@
S/N KCZ1-UP
220-MM (8.7-IN) BORE X 2262-MM (89.1-IN) STROKE
FIELD REPLACEMENT FOR @@@@@365-3312@@@@@
Parts for your 390D EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 116-3519 J | [1] | RING-SEAL | |
2. | 128-9262 | [1] | BUSHING | |
3. | 155-9157 J | [2] | RING | |
4. | 165-9296 J | [1] | SEAL-LIP TYPE | |
5. | 173-3414 J | [1] | RING | |
6. | 191-5704 | [1] | STOP | |
7. | 317-8435 | [1] | ROD AS | |
7A. | 172-2848 | [1] | BUSHING | |
8. | 350-3842 M | [2] | SETSCREW (M8X1.25X12.3-MM) | |
9. | 353-9626 | [1] | CYLINDER AS | |
9A. | 172-2848 | [1] | BUSHING | |
10. | 365-3598 | [1] | HEAD | |
11. | 365-9196 J | [1] | SEAL-O-RING | |
12. | 367-3934 J | [1] | SEAL-BUFFER | |
13. | 367-3961 J | [1] | SEAL-U-CUP | |
14. | 383-8638 | [1] | STOP | |
15. | 433-5664 | [1] | PISTON | |
16. | 436-8027 | [1] | NUT | |
17. | 103-8364 | [1] | RING-RETAINING | |
18. | 116-3516 M | [1] | NUT-SELF LOCKING (M120X2-THD) | |
19. | 177-9754 M | [12] | BOLT (M30X3.5X130-MM) | |
20. | 215-9864 J | [1] | RING-BACKUP | |
21. | 365-9197 J | [2] | RING-BACKUP | |
22. | 8C-4893 J | [1] | SEAL-HEAD (211.58-MM ID) | |
23. | 8C-9182 J | [1] | SEAL AS | |
24. | 9X-8399 | [12] | WASHER (33X56X6-MM THK) | |
25. | 5M-6213 | [2] | PLUG-PIPE (1/4-18-THD) | |
AVAILABLE REPAIR KIT(S): | ||||
370-1866 J | KIT-SEAL (STICK CYLINDER) | |||
J | KIT MARKED J SERVICES PART(S) MARKED J | |||
M | METRIC PART |
#SEBP56160523
365-3312: CYLINDER GP-STICK
365-3312 CYLINDER GP-STICK
S/N KCZ1-UP
220-MM (8.7-IN) BORE X 2262-MM (89.1-IN) STROKE
PART OF 353-9643 CYLINDER & SEAL GP-HYDRAULIC
FIELD REPLACEMENT ORDER @@@@@363-1685@@@@@
AN ATTACHMENT
S/N KCZ1-UP
220-MM (8.7-IN) BORE X 2262-MM (89.1-IN) STROKE
PART OF 353-9643 CYLINDER & SEAL GP-HYDRAULIC
FIELD REPLACEMENT ORDER @@@@@363-1685@@@@@
AN ATTACHMENT
Parts for your 390D EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 116-3519 J | [1] | RING-SEAL | |
2. | 128-9262 | [1] | BUSHING | |
3. | 155-9157 J | [2] | RING | |
4. | 165-9296 J | [1] | SEAL-LIP TYPE | |
5. | 173-3414 J | [1] | RING | |
6. | 191-5704 | [1] | STOP | |
7. | 317-8435 | [1] | ROD AS | |
7A. | 172-2848 | [1] | BUSHING | |
8. | 350-3842 M | [2] | SETSCREW (M8X1.25X12.3-MM) | |
9. | 353-9626 | [1] | CYLINDER AS | |
9A. | 172-2848 | [1] | BUSHING | |
10. | 365-3598 | [1] | HEAD | |
11. | 367-3934 J | [1] | SEAL-BUFFER | |
12. | 367-3961 J | [1] | SEAL-U-CUP | |
13. | 383-8638 | [1] | STOP | |
14. | 433-5664 | [1] | PISTON | |
15. | 436-8027 | [1] | NUT | |
16. | 103-8364 | [1] | RING-RETAINING | |
17. | 116-3516 M | [1] | NUT-SELF LOCKING (M120X2-THD) | |
18. | 177-9754 M | [12] | BOLT (M30X3.5X130-MM) | |
19. | 215-9864 J | [1] | RING-BACKUP | |
20. | 365-9196 J | [1] | SEAL-O-RING | |
21. | 365-9197 J | [2] | RING-BACKUP | |
22. | 5M-6213 | [2] | PLUG-PIPE (1/4-18-THD) | |
23. | 8C-4893 J | [1] | SEAL-HEAD (211.58-MM ID) | |
24. | 8C-9182 J | [1] | SEAL AS | |
25. | 9X-8258 | [12] | WASHER (33X56X6-MM THK) | |
AVAILABLE REPAIR KIT(S): | ||||
370-1866 J | [1] | KIT-SEAL (STICK CYLINDER) | ||
J | KIT MARKED J SERVICES PART(S) MARKED J | |||
M | METRIC PART |
#SEBP56160524
570-1981: CYLINDER GP-STICK
570-1981 CYLINDER GP-STICK
S/N KCZ1-UP
220-MM (8.7-IN) BORE X 2262-MM (89.1-IN) STROKE
PART OF 362-6005 CYLINDER & SEAL GP-STICK
FIELD REPLACEMENT FOR @@@@@363-1685@@@@@
AN ATTACHMENT
S/N KCZ1-UP
220-MM (8.7-IN) BORE X 2262-MM (89.1-IN) STROKE
PART OF 362-6005 CYLINDER & SEAL GP-STICK
FIELD REPLACEMENT FOR @@@@@363-1685@@@@@
AN ATTACHMENT
Parts for your 390D EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 5M-6213 | [2] | PLUG-PIPE (1/4-18-THD) | |
2. | 8C-4893 J | [1] | SEAL-HEAD (211.58-MM ID) | |
3. | 8C-9182 J | [1] | SEAL AS | |
4. | 9X-8399 | [12] | WASHER (33X56X6-MM THK) | |
5. | 103-8364 | [1] | RING-RETAINING | |
6. | 116-3516 M | [1] | NUT-SELF LOCKING (M120X2-THD) | |
7. | 116-3519 J | [1] | RING-SEAL | |
8. | 155-9157 J | [2] | RING | |
9. | 173-3414 J | [1] | RING | |
10. | 177-9754 M | [12] | BOLT (M30X3.5X130-MM) | |
11. | 191-5704 | [1] | STOP | |
12. | 317-8435 | [1] | ROD AS | |
12A. | 172-2848 | [1] | BUSHING | |
13. | 350-3842 M | [2] | SETSCREW (M8X1.25X12.3-MM) | |
14. | 353-9626 | [1] | CYLINDER AS | |
14A. | 172-2848 | [1] | BUSHING | |
15. | 365-9196 J | [1] | SEAL-O-RING | |
16. | 365-9197 J | [2] | RING-BACKUP | |
17. | 367-3934 J | [1] | SEAL-BUFFER | |
18. | 367-3961 J | [1] | SEAL-U-CUP | |
19. | 383-8638 | [1] | STOP | |
20. | 433-5664 | [1] | PISTON | |
21. | 436-8027 | [1] | NUT | |
22. | 514-6718 J | [1] | SEAL-LIP TYPE | |
23. | 514-6719 J | [1] | RING-BACKUP | |
24. | 570-1982 | [1] | HEAD | |
25. | 570-1983 | [1] | BEARING-SLEEVE | |
26. | 570-1984 J | [1] | RING-WEAR | |
AVAILABLE REPAIR KIT(S): | ||||
570-1985 JY | [1] | KIT-HYDRAULIC CYLINDER | ||
J | KIT MARKED J SERVICES PART(S) MARKED J | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP56160525
6I-3638: DRIVE GP-PUMP
Parts for your 390D EXCAVATOR:
CATERPILLAR SIS#SEBP56160526
148-4598: DRIVE GP-SWING
148-4598 DRIVE GP-SWING -WITHOUT MOTOR, FRONT
S/N KCZ1-UP
PART OF 227-6131 DRIVE GP-SWING
S/N KCZ1-UP
PART OF 227-6131 DRIVE GP-SWING
Parts for your 390D EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 148-4602 | [4] | GEAR-PLANETARY (24-TEETH) | |
2. | 094-1528 | [8] | WASHER (53X84X1-MM THK) | |
3. | 148-4608 | [4] | SHAFT-PLANETARY | |
4. | 191-2525 | [1] | COVER-HOUSING | |
5. | 148-4600 | [1] | GEAR-SUN (17-TEETH) | |
6. | 7I-7684 M | [2] | SPACER (50X79.6X6-MM THK) | |
7. | 199-4680 | [1] | GAUGE-OIL LEVEL (SWING DRIVE) | |
8. | 199-4678 | [1] | PIPE AS | |
9. | 096-1441 | [1] | RING-RETAINING | |
10. | 093-1730 | [1] | RING-RETAINING | |
11. | 148-4601 | [1] | GEAR-SUN (17-TEETH) | |
12. | 191-2511 | [1] | CARRIER-PLANETARY | |
13. | 114-1322 | [1] | RING-RETAINING | |
14. | 148-4607 | [1] | CARRIER-PLANETARY | |
15. | 148-4604 | [1] | GEAR-RING (67-TEETH) | |
17. | 1U-8846 B | SEALANT-GASKET | ||
18. | 110-7149 | [1] | RING-RETAINING | |
19. | 9U-8693 | [1] | BEARING-ROLLER | |
20. | 6V-7238 | [1] | VALVE-SHUTOFF | |
21. | 3K-0360 | [1] | SEAL-O-RING | |
22. | 7I-7619 | [1] | BEARING-ROLLER | |
23. | 128-9170 | [2] | SEAL-LIP TYPE | |
24. | 199-4496 | [1] | SHAFT-PINION | |
25. | 7I-7611 | [1] | CAGE | |
26. | 453-3447 M | [10] | BOLT (M12X1.75X40-MM) | |
27. | 451-2182 | [10] | WASHER-HARD (13.5X25.5X3-MM THK) | |
28. | 5M-4454 | [1] | SEAL-O-RING | |
29. | 191-2524 | [1] | HOUSING | |
30. | 148-4611 | [8] | WASHER (71.3X112X1-MM THK) | |
31. | 191-2514 | [8] | BEARING AS | |
32. | 148-4609 | [4] | SHAFT-PLANETARY | |
33. | 148-4603 | [4] | GEAR-PLANETARY (24-TEETH) | |
34. | 099-5194 | [8] | PIN-SPRING | |
35. | 453-4169 M | [24] | BOLT (M16X2X200-MM) | |
36. | 451-2175 | [24] | WASHER-HARD (17.5X30X3.5-MM THK) | |
37. | 191-2513 | [4] | BEARING AS-ROLLER | |
38. | 227-6221 C | [1] | BREATHER AS (SWING DRIVE) | |
4H-6112 | [1] | BREATHER (SWING DRIVE) | ||
227-6215 | [1] | BOSS (1/4-18-THD) | ||
267-6785 | [1] | PIPE | ||
39. | 171-9413 | [1] | SPACER (140.5X160X103.2-MM THK) | |
40. | 199-4672 | [1] | CONNECTOR AS | |
6V-9746 | [1] | SEAL-O-RING | ||
B | USE AS REQUIRED | |||
C | CHANGE FROM PREVIOUS TYPE | |||
M | METRIC PART |
#SEBP56160527
148-4626: DRIVE GP-SWING
148-4626 DRIVE GP-SWING -WITHOUT MOTOR, REAR
S/N KCZ1-UP
PART OF 227-6130 DRIVE GP-SWING
S/N KCZ1-UP
PART OF 227-6130 DRIVE GP-SWING
Parts for your 390D EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 148-4602 | [4] | GEAR-PLANETARY (24-TEETH) | |
2. | 094-1528 | [8] | WASHER (53X84X1-MM THK) | |
3. | 148-4608 | [4] | SHAFT-PLANETARY | |
4. | 191-2525 | [1] | COVER-HOUSING | |
5. | 148-4600 | [1] | GEAR-SUN (17-TEETH) | |
6. | 7I-7684 M | [2] | SPACER (50X79.6X6-MM THK) | |
7. | 199-4672 | [1] | CONNECTOR AS | |
6V-9746 | [1] | SEAL-O-RING | ||
8. | 199-4674 | [1] | PIPE AS | |
9. | 096-1441 | [1] | RING-RETAINING | |
10. | 093-1730 | [1] | RING-RETAINING | |
11. | 148-4601 | [1] | GEAR-SUN (17-TEETH) | |
12. | 191-2511 | [1] | CARRIER-PLANETARY | |
13. | 114-1322 | [1] | RING-RETAINING | |
14. | 148-4607 | [1] | CARRIER-PLANETARY | |
15. | 148-4604 | [1] | GEAR-RING (67-TEETH) | |
18. | 110-7149 | [1] | RING-RETAINING | |
19. | 9U-8693 | [1] | BEARING-ROLLER | |
20. | 7I-7619 | [1] | BEARING-ROLLER | |
21. | 128-9170 | [2] | SEAL-LIP TYPE | |
22. | 199-4496 | [1] | SHAFT-PINION | |
23. | 7I-7611 | [1] | CAGE | |
24. | 453-3447 M | [10] | BOLT (M12X1.75X40-MM) | |
25. | 451-2182 | [10] | WASHER-HARD (13.5X25.5X3-MM THK) | |
26. | 5M-4454 | [1] | SEAL-O-RING | |
27. | 191-2524 | [1] | HOUSING | |
28. | 6V-7238 | [1] | VALVE-SHUTOFF | |
29. | 3K-0360 | [1] | SEAL-O-RING | |
30. | 148-4611 | [8] | WASHER (71.3X112X1-MM THK) | |
31. | 191-2514 | [8] | BEARING AS | |
32. | 148-4609 | [4] | SHAFT-PLANETARY | |
33. | 148-4603 | [4] | GEAR-PLANETARY (24-TEETH) | |
34. | 099-5194 | [8] | PIN-SPRING | |
35. | 453-4169 M | [24] | BOLT (M16X2X200-MM) | |
36. | 451-2175 | [24] | WASHER-HARD (17.5X30X3.5-MM THK) | |
37. | 191-2513 | [4] | BEARING AS-ROLLER | |
38. | 227-6221 C | [1] | BREATHER AS (SWING DRIVE) | |
4H-6112 | [1] | BREATHER (SWING DRIVE) | ||
227-6215 | [1] | BOSS (1/4-18-THD) | ||
267-6785 | PIPE | |||
39. | 171-9413 | [1] | SPACER (140.5X160X103.2-MM THK) | |
40. | 199-4681 | [1] | GAUGE-OIL LEVEL (SWING DRIVE) | |
1U-8846 BF | SEALANT-GASKET | |||
B | USE AS REQUIRED | |||
C | CHANGE FROM PREVIOUS TYPE | |||
F | NOT SHOWN | |||
M | METRIC PART |
#SEBP56160528
227-6130: DRIVE GP-SWING
Parts for your 390D EXCAVATOR:
CATERPILLAR SIS#SEBP56160529
227-6131: DRIVE GP-SWING
227-6131 DRIVE GP-SWING -WITH MOTOR, FRONT
S/N KCZ1-UP
PART OF 227-6129 POWER TRAIN AR
S/N KCZ1-UP
PART OF 227-6129 POWER TRAIN AR
Parts for your 390D EXCAVATOR:
CATERPILLAR SISInformation:
HYDRAULIC SYSTEM
CYLINDER GP
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
The Lip Type Seal Installed in the Cylinder Heads of the Bucket Cylinder and Stick Cylinder May Move Out of the Cylinder Head Seal Groove on 390D Excavators{5457, 5458}
The Lip Type Seal Installed in the Cylinder Heads of the Bucket Cylinder and Stick Cylinder May Move Out of the Cylinder Head Seal Groove on 390D Excavators{5457, 5458}
The Lip Type Seal Installed in the Cylinder Heads of the Bucket Cylinder and Stick Cylinder May Move Out of the Cylinder Head Seal Groove on 390D Excavators{5457, 5458}
Bucket Cylinder Rods are Breaking on Certain 390D, 390L, and 390F Excavators {5457}
Bucket Cylinder Rods are Breaking on Certain 390D, 390L, and 390F Excavators {5457}
Bucket Cylinder Rods are Breaking on Certain 390D, 390L, and 390F Excavators {5457}
Stick Cylinder Rod Bending or Cracking on Certain 390D and 390F Excavators and Mobile Hydraulic Power Units {5458}
Stick Cylinder Rod Bending or Cracking on Certain 390D and 390F Excavators and Mobile Hydraulic Power Units {5458}
Stick Cylinder Rod Bending or Cracking on Certain 390D and 390F Excavators and Mobile Hydraulic Power Units {5458}
Stick Cylinder Rod Assembly May Bend or Crack on Certain Excavators and Mobile Hydraulic Power Units {5458}
Stick Cylinder Rod Assembly May Bend or Crack on Certain Excavators and Mobile Hydraulic Power Units {5458}
Stick Cylinder Rod Assembly May Bend or Crack on Certain Excavators and Mobile Hydraulic Power Units {5458}
Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Systems Operation
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Disassembly and Assembly
Service Magazine
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
A New Boom Cylinder Group and Rod Assembly is Now Used on Certain Excavators, Material Handlers, and Mobile Hydraulic Power Units {5456}
A New Boom Cylinder Group and Rod Assembly is Now Used on Certain Excavators, Material Handlers, and Mobile Hydraulic Power Units {5456}
A New Boom Cylinder Group and Rod Assembly is Now Used on Certain Excavators, Material Handlers, and Mobile Hydraulic Power Units {5456}
Improved Stick and Bucket Cylinder Rod Seals Are Now Used on Certain Excavators {5457, 5458}
Improved Stick and Bucket Cylinder Rod Seals Are Now Used on Certain Excavators {5457, 5458}
Improved Stick and Bucket Cylinder Rod Seals Are Now Used on Certain Excavators {5457, 5458}