AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

289-6913 DOOR GP-ACCESS -PUMP COMPARTMENT S/N PCM1-UP PART OF 273-7726, 358-9720 HOOD & GUARD GP 320D GC


FRAME AND BODY
DOOR GP
FENDER GP
FRAME GP
GEAR & BEARING GP
GUARD GP
HANDRAIL GP

EXCAVATOR 320D GC EXCAVATOR PCM
 320D GC Excavator PCM00001-UP (MACHINE) POWERED BY C6.4 Engine SEBP5618 320D GC PCM   (2010)

FRAME AND BODY

DOOR GP
DOOR GP-ACCESS
289-6913 DOOR GP-ACCESS
DOOR GP-ACCESS
289-6915 DOOR GP-ACCESS
DOOR GP-ACCESS
289-6917 DOOR GP-ACCESS
DOOR GP-ACCESS
298-2977 DOOR GP-ACCESS
 

#SEBP56180170
 

289-6913: DOOR GP-ACCESS

289-6913 DOOR GP-ACCESS -PUMP COMPARTMENT
S/N PCM1-UP
PART OF 273-7726, 358-9720 HOOD & GUARD GP
i02748724 SEBP5618
2896913 DOOR GP-ACCESS Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 289-6914 [1] DOOR AS-ACCESS  
  165-2976 [2] HINGE  
2. 298-2942 J [1] LATCH AS  
3. 099-6418 M [4] NUT (M6X1-THD)  
4. 244-7928 [1] INSULATION  
5. 244-7927 [1] INSULATION  
6. 248-8961 [1] LINER  
7. 184-8862 [1] COVER  
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP56180171
 

289-6915: DOOR GP-ACCESS

289-6915 DOOR GP-ACCESS -RADIATOR
S/N PCM1-869
PART OF 273-7726 HOOD & GUARD GP
i02748794 SEBP5618
2896915 DOOR GP-ACCESS Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 099-6418 M [4] NUT (M6X1-THD)  
2. 122-4101 [1] RUBBER  
3. 208-4289 [1] CUSHION  
4. 244-7929 [1] INSULATION  
5. 165-2976 [2] HINGE  
6. 298-2942 J [1] LATCH AS  
  366-6478 [1] LOCK AS  
7. 307-7656 [1] LINER  
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP56180172
 

289-6917: DOOR GP-ACCESS

289-6917 DOOR GP-ACCESS -RADIATOR
S/N PCM870-UP
PART OF 358-9720 HOOD & GUARD GP
i02754838 SEBP5618
2896917 DOOR GP-ACCESS Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 099-6418 M [4] NUT (M6X1-THD)  
2. 122-4101 [1] RUBBER  
3. 208-4289 [1] CUSHION  
4. 293-6644 [1] DOOR AS-ACCESS  
4A. 165-2976 [2] HINGE  
5. 298-2942 J [1] LATCH AS  
6. 307-7656 [1] LINER  
  J   REQUIRES CORPORATE KEY
  M   METRIC PART
 

#SEBP56180173
 

298-2977: DOOR GP-ACCESS

298-2977 DOOR GP-ACCESS -AIR CLEANER, BATTERY
S/N PCM1-UP
PART OF 273-7726, 358-9720 HOOD & GUARD GP
i02927441 SEBP5618
2982977 DOOR GP-ACCESS Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 236-3747 [1] INSULATION  
2. 236-3748 [1] INSULATION  
3. 250-5054 [1] LINER  
4. [1] DOOR AS-ACCESS  
4A. 165-2976 [2] HINGE  
5. 208-4289 [1] CUSHION  
 

#SEBP56180174
 

223-3042: FENDER & COVER GP

223-3042 FENDER & COVER GP
S/N PCM1-UP
PART OF 351-9703 CHASSIS AR
i02533964 SEBP5618
2233042 FENDER & COVER GP Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-8573 [2] BOLT AS  
2. 236-3702 [2] SPACER (15X35X11-MM THK)  
3. 236-3703 [2] WASHER (25X35X4-MM THK)  
4. 236-9570 [1] COVER AS  
5. 259-3543 [1] STEP AS  
6. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
7. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
 

#SEBP56180175
 

273-6716: FRAME GP-UPPER

273-6716 FRAME GP-UPPER
S/N PCM1-UP
PART OF 351-9703 CHASSIS AR
i02747670 SEBP5618
2736716 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 093-0083 B [4] SHIM (1-MM THK)  
2. 308-8776 B [2] SHIM (1-MM THK)  
3. 093-0115 B [2] SHIM (2-MM THK)  
4. 308-8777 B [1] SHIM (2-MM THK)  
5. 093-0349 [3] WASHER (22X60X6-MM THK)  
6. 093-0363 [2] SPACER (83X120X12-MM THK)  
7. 308-8775 B [1] SHIM (0.5-MM THK)  
8. 133-2425 B [2] SHIM (0.5-MM THK)  
9. 4I-4812 [2] PIN AS  
10. 212-2838 [2] SHIM (2-MM THK)  
11. 245-7900 J [1] CAP  
12. 245-7901 J [1] CAP  
13. 315-0800 [1] PIN AS  
14. 352-9597 [1] FRAME AS-UPPER  
14A. 163-3729 [1] STEP AS  
14B. 7Y-0633 [1] BOSS  
  178-0852 [1] PLATE-SKIRT (1100-MM)  
  184-5724 [1] PLATE-SKIRT (2000-MM)  
15. 8T-4123 [3] WASHER (3.62X5.75X0.375-MM THK)  
16. 8T-4191 BM [1] BOLT (M10X1.5X16-MM)  
17. 8T-4780 M [3] BOLT (M20X2.5X30-MM)  
  B   USE AS REQUIRED
  J   USE ON MACHINE WITHOUT LOWER WIPER
  M   METRIC PART
 

#SEBP56180176
 

227-6081: GEAR & BEARING GP-SWING

227-6081 GEAR & BEARING GP-SWING
S/N PCM1-UP
PART OF 227-6147 GEAR & BEARING GP-SWING
i02271992 SEBP5618
2276081 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 227-6071 [1] SEAL-DUST  
3. 148-4685 E SEAL (368-CM)  
4. 352-7064 [1] CAP  
  E   ORDER BY THE CENTIMETER
 

#SEBP56180177
 

227-6147: GEAR & BEARING GP-SWING

227-6147 GEAR & BEARING GP-SWING
S/N PCM1-UP
PART OF 247-7454 FRAME AR-UNDERCARRIAGE
i02545711 SEBP5618
2276147 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-9243 [2] ELBOW-FLARED  
2. 7Y-1647 [1] GASKET  
3. 7Y-1650 [1] CLAMP-HOSE  
4. 468-5306 [40] SPACER (20.5X38X34-MM THK)  
5. 148-4689 [1] TUBE AS  
6. 171-9464 [37] SPACER (20.6X38X6-MM THK)  
7. 227-6081 Y [1] GEAR & BEARING GP-SWING  
8. 227-6105 [1] BOOT  
9. 227-6106 [1] RETAINER  
10. 096-4902 [1] DOWEL  
11. 148-4703 [1] COVER  
12. 148-4704 [1] GASKET  
13. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
14. 4N-9170 [2] CLIP (LOOP)  
15. 7Y-1648 [1] STRIP  
16. 145-9278 M [40] BOLT (M20X2.5X90-MM)  
17. 5Q-3560 M [37] BOLT (M20X2.5X110-MM)  
18. 453-3454 [14] WASHER-HARD (11X21X2.5-MM THK)  
19. 457-8759 M [2] BOLT (M10X1.5X20-MM)  
20. 455-3798 M [12] BOLT (M10X1.5X25-MM)  
21. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56180178
 

289-6424: GUARD GP-BOTTOM

289-6424 GUARD GP-BOTTOM
S/N PCM1-UP
PART OF 351-9703 CHASSIS AR
i02752002 SEBP5618
2896424 GUARD GP-BOTTOM Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-8576 [36] BOLT AS-LOCKING  
2. 165-2823 [1] SHEET  
3. 248-8992 [1] SHEET  
4. 248-8993 [1] SHEET  
5. 248-8994 [1] SHEET  
6. 248-8995 [1] SHEET  
7. 273-7674 [2] SHEET  
8. 286-6281 [1] SHEET AS  
9. 289-6603 [1] SHEET  
10. 342-0932 J [1] SHEET AS  
11. 342-0965 J [1] PLATE AS  
12. 8C-8992 JM [2] BOLT-LOCKING (M12X1.75X30-MM)  
13. 5P-1076 J [2] WASHER-HARD (13.5X30X4-MM THK)  
  J   OPTIONAL DESIGN FOR COLD WEATHER APPLICATIONS
  M   METRIC PART
 

#SEBP56180179
 

142-3835: HANDRAIL GP

142-3835 HANDRAIL GP
S/N PCM1-UP
PART OF 351-9703 CHASSIS AR
i01306093 SEBP5618
1423835 HANDRAIL GP Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
2. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
3. 177-5880 [2] SLEEVE  
4. 177-5879 [1] CLAMP  
5. 177-5877 [1] HANDHOLD AS  
6. 135-8578 [3] BOLT AS  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 320D GC :

COVER AS-ACCESS
298-2979 COVER AS-ACCESS
COUNTERWEIGHT GP
327-3252 COUNTERWEIGHT GP
COUNTERWEIGHT GP
327-3248 COUNTERWEIGHT GP
290-1902 COUNTERWEIGHT AR
COUNTERWEIGHT & MOUNTING GP
262-2608 COUNTERWEIGHT & MOUNTING GP
COUNTERWEIGHT & MOUNTING GP
262-2608 COUNTERWEIGHT & MOUNTING GP
COUNTERWEIGHT & MOUNTING GP
262-2607 COUNTERWEIGHT & MOUNTING GP
COUNTERWEIGHT & MOUNTING GP
262-2607 COUNTERWEIGHT & MOUNTING GP
DOOR GP-ACCESS
289-6915 DOOR GP-ACCESS
DOOR GP-ACCESS
289-6917 DOOR GP-ACCESS
DOOR GP-ACCESS
298-2977 DOOR GP-ACCESS
FENDER & COVER GP
223-3042 FENDER & COVER GP
FRAME GP-UPPER
273-6716 FRAME GP-UPPER
GEAR & BEARING GP-SWING
227-6081 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
227-6147 GEAR & BEARING GP-SWING
GUARD GP-BOTTOM
289-6424 GUARD GP-BOTTOM

Truck sale:

CATERPILLAR 320DGC 2011
 
CATERPILLAR 320DGC 2011
- TRACK EXCAVATORS
LEI SHING HONG
Shugang West Road #2 - Yangzhou Jiangsu testing
CATERPILLAR 320DGC 2011
 
CATERPILLAR 320DGC 2011
- TRACK EXCAVATORS
LEI SHING HONG
Shugang West Road #2 - Yangzhou Jiangsu testing
CATERPILLAR 320DGC 2012
 
CATERPILLAR 320DGC 2012
- TRACK EXCAVATORS
LEI SHING HONG
Shugang West Road #2 - Yangzhou Jiangsu testing
CATERPILLAR 320 DGC 2010
 
CATERPILLAR 320 DGC 2010
- TRACK EXCAVATORS
LEI SHING HONG
Shugang West Road #2 - Yangzhou Jiangsu testing
 
 
CATERPILLAR 320DGC 2011
- TRACK EXCAVATORS
LEI SHING HONG
Shugang West Road #2 - Yangzhou Jiangsu testing
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.