AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

242-6748 CYLINDER & SEAL GP-STICK S/N PCM1-UP 140-MM (5.5-IN) BORE X 1504-MM (59.2-IN) STROKE PART OF 242-6747 CYLINDER & LINES GP-STICK AN ATTACHMENT 320D GC


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
FILTER GP

EXCAVATOR 320D GC EXCAVATOR PCM
 320D GC Excavator PCM00001-UP (MACHINE) POWERED BY C6.4 Engine SEBP5618 320D GC PCM   (2010)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & SEAL GP-BUCKET
349-4134 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-STICK
242-6734 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
242-6748 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
341-2802 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
349-4128 CYLINDER & SEAL GP-STICK
 

#SEBP56180250
 

242-6748: CYLINDER & SEAL GP-STICK

242-6748 CYLINDER & SEAL GP-STICK
S/N PCM1-UP
140-MM (5.5-IN) BORE X 1504-MM (59.2-IN) STROKE
PART OF 242-6747 CYLINDER & LINES GP-STICK
AN ATTACHMENT
i02573935 SEBP5618
2426748 CYLINDER & SEAL GP-STICK Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-0736 J [1] SEAL-LIP TYPE  
2. 154-0738 J [1] RING-BACKUP  
3. 154-0737 J [1] SEAL-U-CUP  
4. 154-0739 J [1] SEAL-BUFFER  
5. 096-5625 [1] BUSHING  
6. 094-1931 [1] RING-RETAINING  
7. 188-4181 [1] HEAD  
8. 4I-3628 M [12] BOLT-SOCKET HEAD (M18X2.5X80-MM)  
9. 095-1721 J [1] SEAL-O-RING  
10. 4I-3627 J [1] RING-BACKUP  
11. 247-8876 [1] CYLINDER AS  
11A. 241-7381 [1] BUSHING  
12. 247-8877 [1] ROD AS  
12A. 241-7381 [1] BUSHING  
13. 4I-8869 [1] STOP  
14. 126-1876 J [1] RING-SEAL  
15. 4I-3631 J [2] RING-BACKUP  
16. 096-1570 J [1] SEAL AS  
17. 247-8874 J [2] RING  
18. 096-1571 J [2] RING  
19. 247-8873 [1] PISTON  
20. 096-6210 M [1] SETSCREW-SOCKET (M14X2X14-MM)  
21. 4B-9880 [1] BALL  
22. 085-8605 [1] RING-RETAINING  
23. 194-8359 J [1] RING-SEAL  
24. 121-1549 [1] STOP  
25. 085-8604 [2] RING-RETAINING  
26. 166-1494 [4] SEAL-LIP TYPE  
27. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
   
    AVAILABLE REPAIR KIT(S):
  259-0775 J [1] KIT-SEAL (HYDRAULIC CYLINDER)(STICK)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP56180251
 

341-2802: CYLINDER & SEAL GP-STICK

341-2802 CYLINDER & SEAL GP-STICK
S/N PCM1-UP
140-MM (5.5-IN) BORE X 1504-MM (59.2-IN) STROKE
FIELD REPLACEMENT FOR @@@@@349-4128@@@@@
FIELD INSTALLATION
i05270913 SEBP5618
3412802 CYLINDER & SEAL GP-STICK Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 352-1098 [1] CYLINDER AS-STICK  
1A. 357-5711 [2] BUSHING  
2. 352-1104 [1] ROD AS  
2A. 240-2914 [2] BUSHING  
3. 188-4181 [1] HEAD  
4. 095-1721 J [1] SEAL-O-RING  
5. 4I-3627 J [1] RING-BACKUP  
6. 096-5625 [1] BUSHING  
7. 094-1931 [1] RING-RETAINING  
8. 350-0955 J [1] SEAL-BUFFER  
9. 350-0960 J [1] SEAL-U-CUP  
10. 121-1372 J [1] RING-BACKUP  
11. 456-0195 J [1] SEAL-LIP TYPE  
12. 126-1876 J [1] RING-SEAL  
13. 378-1556 [1] STOP  
14. 247-8873 [1] PISTON  
15. 096-1571 J [2] RING  
16. 247-8874 J [2] RING  
17. 096-1570 J [1] SEAL AS  
18. 4I-3631 J [2] RING-BACKUP  
19. 4B-9880 [1] BALL  
20. 096-6210 M [1] SETSCREW-SOCKET (M14X2X14-MM)  
21. 085-8605 [1] RING-RETAINING  
22. 194-8359 J [1] RING-SEAL  
23. 085-8604 [2] RING-RETAINING  
24. 121-1549 [1] STOP  
25. 4I-3628 M [12] BOLT-SOCKET HEAD (M18X2.5X80-MM)  
26. 166-1494 [4] SEAL-LIP TYPE  
27. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
   
    AVAILABLE REPAIR KIT(S):
  456-0202 J [1] KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP56180252
 

349-4128: CYLINDER & SEAL GP-STICK

349-4128 CYLINDER & SEAL GP-STICK
S/N PCM1-UP
140-MM (5.5-IN) BORE X 1504-MM (59.25-IN) STROKE
PART OF 349-4127 CYLINDER & LINES GP-STICK
FIELD REPLACEMENT ORDER @@@@@341-2802@@@@@
AN ATTACHMENT
i04157148 SEBP5618
3494128 CYLINDER & SEAL GP-STICK Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-6904 J [1] SEAL-LIP TYPE  
2. 121-1372 J [1] RING-BACKUP  
3. 350-0960 J [1] SEAL-U-CUP  
4. 350-0955 J [1] SEAL-BUFFER  
5. 096-5625 [1] BUSHING  
6. 094-1931 [1] RING-RETAINING  
7. 188-4181 [1] HEAD  
8. 4I-3628 M [12] BOLT-SOCKET HEAD (M18X2.5X80-MM)  
9. 095-1721 J [1] SEAL-O-RING  
10. 4I-3627 J [1] RING-BACKUP  
11. 247-8876 [1] CYLINDER AS  
11A. 241-7381 [1] BUSHING  
12. 247-8877 [1] ROD AS  
12A. 241-7381 [1] BUSHING  
13. 4I-8869 [1] STOP  
14. 126-1876 J [1] RING-SEAL  
15. 4I-3631 J [2] RING-BACKUP  
16. 096-1570 J [1] SEAL AS  
17. 247-8874 J [2] RING  
18. 096-1571 J [2] RING  
19. 247-8873 [1] PISTON  
20. 096-6210 M [1] SETSCREW-SOCKET (M14X2X14-MM)  
21. 4B-9880 [1] BALL  
22. 085-8605 [1] RING-RETAINING  
23. 194-8359 J [1] RING-SEAL  
24. 121-1549 [1] STOP  
25. 085-8604 [2] RING-RETAINING  
26. 166-1494 [4] SEAL-LIP TYPE  
27. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
   
    AVAILABLE REPAIR KIT(S):
  350-0970 J [1] KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP56180253
 

148-4644: DRIVE GP-SWING

148-4644 DRIVE GP-SWING -WITHOUT MOTOR
S/N PCM1-UP
PART OF 148-4679 DRIVE GP-SWING
i01319773 SEBP5618
1484644 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
2. 094-1509 [3] SHAFT-PLANETARY  
3. 148-4733 [3] GEAR-PLANETARY (26-TEETH)  
4. 114-1581 [1] SPACER (57.5X74X6-MM THK)  
5. 148-4732 [1] GEAR-SUN (20-TEETH)  
6. 093-1729 [2] RING-RETAINING  
7. 148-4632 [1] GEAR-SUN (23-TEETH)  
8. 191-2578 [1] CARRIER-PLANETARY  
9. 7Y-1434 [1] SPACER (40X69.5X6-MM THK)  
10. 148-4637 [1] CARRIER-PLANETARY  
11. 148-4640 [1] RING-RETAINING  
12. 148-4643 [1] BEARING  
13. 095-1022 [1] BEARING-ROLLER  
14. 148-4642 [1] SEAL-O-RING  
15. 227-6228 [1] CAGE  
16. 453-3447 M [6] BOLT (M12X1.75X40-MM)  
17. 451-2182 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 199-4561 [2] SEAL-LIP TYPE  
19. 148-4636 [1] SHAFT-PINION  
20. 148-4638 [1] HOUSING  
21. 3K-0360 [1] SEAL-O-RING  
22. 6V-7238 [1] VALVE-SHUTOFF (SWING DRIVE)  
23. 148-4634 [3] SHAFT-PLANETARY  
24. 095-0891 [3] PIN-SPRING  
25. 148-4635 [1] GEAR-RING (73-TEETH)  
26. 148-4633 [3] GEAR-PLANETARY (25-TEETH)  
27. 7Y-0252 [6] BEARING AS-ROLLER  
28. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
29. 095-0886 [3] PIN-SPRING  
30. 094-1516 [3] BEARING-ROLLER  
31. 171-9383 [1] SPACER  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP56180254
 

148-4679: DRIVE GP-SWING

148-4679 DRIVE GP-SWING -WITH MOTOR
S/N PCM1-UP
PART OF 267-6767 POWER TRAIN AR
i02638996 SEBP5618
1484679 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-4644 Y [1] DRIVE GP-SWING (WITHOUT MOTOR)  
2. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
3. 114-1399 [1] PIPE-GAUGE  
4. 158-8985 Y [1] MOTOR & MTG GP-SWING  
5. 227-6221 [1] BREATHER AS (SWING DRIVE)  
5A. 4H-6112 [1] BREATHER (SWING DRIVE)  
5B. 227-6215 [1] BOSS (1/4-18-THD)  
5C. 267-6785 [1] PIPE  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP56180255
 

227-6166: FASTENER GP-SWING & FINAL DR

227-6166 FASTENER GP-SWING & FINAL DR
S/N PCM1-UP
PART OF 267-6767 POWER TRAIN AR
i02544890 SEBP5618
2276166 FASTENER GP-SWING & FINAL DR Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2Y-5503 [2] CORK  
2. 5D-1026 [1] CLAMP-BAND  
3. 096-4755 [1] PIN  
4. 461-3878 M [32] BOLT (M20X2.5X160-MM)  
5. 461-3882 M [12] BOLT (M24X3X70-MM)  
6. 8T-3282 [32] WASHER-HARD (22X35X3.5-MM THK)  
7. 6V-8237 [12] WASHER (26X44X4-MM THK)  
8. 5P-0767 E HOSE (90-CM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP56180256
 

158-8987: FILTER & VALVE GP-PILOT

158-8987 FILTER & VALVE GP-PILOT -HYDRAULIC OIL
S/N PCM1-UP
PART OF 239-1711 TANK & FILTER GP-HYDRAULIC
i02998214 SEBP5618
1588987 FILTER & VALVE GP-PILOT Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5I-8670 C [1] FILTER-OIL (ADVANCED EFFICIENCY)(HYDRAULIC, PILOT)  
2. 215-4909 C [1] VALVE GP-PILOT RELIEF (HYDRAULIC FILTER)  
2A. 095-1584 [1] SEAL-O-RING  
2B. 095-1590 [1] SEAL-O-RING  
2C. 095-1596 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP56180257
 

188-4140: FILTER GP-OIL

188-4140 FILTER GP-OIL -HYDRAULIC RETURN
S/N PCM1-UP
PART OF 239-1711 TANK & FILTER GP-HYDRAULIC
Type 1
i02252856 SEBP5618
1884140 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 173-3503 Y [1] BLOCK GP-HYDRAULIC  
2. 129-8034 [1] VALVE AS-BYPASS  
3. 123-2003 [2] SEAL-O-RING  
4. 173-3507 [1] HOUSING AS  
5. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
6. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 188-4142 Y [1] FILTER GP-OIL (HYDRAULIC RETURN)  
8. 173-3510 [1] COVER  
9. 173-3518 [1] INDICATOR AS (HYDRAULIC RETURN FILTER)  
10. 159-7784 [1] SEAL-O-RING  
11. 6V-4298 M [4] BOLT (M5X0.8X16-MM)  
12. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
13. 8T-6693 M [4] SCREW-MACHINE (M5X0.8X16-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56180258
 

188-4140: FILTER GP-OIL

188-4140 FILTER GP-OIL -HYDRAULIC RETURN
S/N PCM1-UP
PART OF 239-1711 TANK & FILTER GP-HYDRAULIC
Type 2
i05426091 SEBP5618
1884140 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 173-3503 Y [1] BLOCK GP-HYDRAULIC  
2. 129-8034 [1] VALVE AS-BYPASS  
3. 123-2003 [2] SEAL-O-RING  
4. 173-3507 [1] HOUSING AS  
5. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
6. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 419-8528 CY [1] FILTER GP-OIL (HYDRAULIC RETURN)  
8. 173-3510 [1] COVER  
9. 173-3518 [1] INDICATOR AS (HYDRAULIC RETURN FILTER)  
10. 159-7784 [1] SEAL-O-RING  
12. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
13. 8T-6693 M [4] SCREW-MACHINE (M5X0.8X16-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56180259
 

188-4142: FILTER GP-OIL

188-4142 FILTER GP-OIL -HYDRAULIC RETURN
S/N PCM1-UP
PART OF 188-4140 FILTER GP-OIL
FIELD REPLACEMENT ORDER @@@@@419-8528@@@@@
i02252859 SEBP5618
1884142 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 320D GC EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 204-2762 [1] PLATE  
2. 173-3529 JM [6] BOLT (M6X1X15-MM)  
3. 3T-7528 J [6] SEAL-O-RING  
4. 173-3513 [1] BASE  
5. 3E-4297 J [2] SEAL-O-RING  
6. 137-3626 M [1] BOLT-SPECIAL (M6X1X23.25-MM)  
7. 188-4143 [1] FILM-INSTRUCTION (HYDRAULIC OIL RETURN FILTER)  
8. 179-9806 [1] FILTER ELEMENT AS-OIL (ADVANCED EFFICIENCY)(HYDRAULIC RETURN)  
9. 137-3623 J [4] SEAL-O-RING  
10. 6V-7658 J [2] SEAL-O-RING  
11. 177-2553 J [1] SEAL-O-RING  
12. 095-1681 J [1] SEAL-O-RING  
13. 173-3515 [1] RING-RETAINING  
14. 173-3516 [1] HANDLE  
15. 4J-7533 J [1] SEAL-O-RING  
16. 9S-4180 J [1] PLUG  
17. 137-3624 JM [8] SCREW (M3X0.5X5-MM)  
18. 137-3625 J [2] PAD  
19. 173-3517 [1] PLATE  
20. 137-3628 J [1] SHIM (0.1-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  201-9299 J [1] KIT-SERVICE (HYDRAULIC RETURN FILTER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 320D GC :

CYLINDER & SEAL GP-STICK
242-6734 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-BUCKET
349-4134 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BUCKET
341-2814 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BUCKET
242-6756 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BOOM
349-4126 CYLINDER & SEAL GP-BOOM
CYLINDER & SEAL GP-BOOM
242-6746 CYLINDER & SEAL GP-BOOM
CYLINDER & SEAL GP-BOOM
242-6731 CYLINDER & SEAL GP-BOOM
349-4127 CYLINDER & LINES GP-STICK
CYLINDER & SEAL GP-STICK
341-2802 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
349-4128 CYLINDER & SEAL GP-STICK
DRIVE GP-SWING
148-4644 DRIVE GP-SWING
DRIVE GP-SWING
148-4679 DRIVE GP-SWING
FASTENER GP-SWING & FINAL DR
227-6166 FASTENER GP-SWING & FINAL DR
FILTER & VALVE GP-PILOT
158-8987 FILTER & VALVE GP-PILOT
FILTER GP-OIL
188-4140 FILTER GP-OIL
FILTER GP-OIL
188-4140 FILTER GP-OIL

Truck sale:

CATERPILLAR 320DGC 2011
 
CATERPILLAR 320DGC 2011
- TRACK EXCAVATORS
LEI SHING HONG
Shugang West Road #2 - Yangzhou Jiangsu testing
CATERPILLAR 320DGC 2011
 
CATERPILLAR 320DGC 2011
- TRACK EXCAVATORS
LEI SHING HONG
Shugang West Road #2 - Yangzhou Jiangsu testing
CATERPILLAR 320DGC 2012
 
CATERPILLAR 320DGC 2012
- TRACK EXCAVATORS
LEI SHING HONG
Shugang West Road #2 - Yangzhou Jiangsu testing
CATERPILLAR 320 DGC 2010
 
CATERPILLAR 320 DGC 2010
- TRACK EXCAVATORS
LEI SHING HONG
Shugang West Road #2 - Yangzhou Jiangsu testing
 
 
CATERPILLAR 320DGC 2011
- TRACK EXCAVATORS
LEI SHING HONG
Shugang West Road #2 - Yangzhou Jiangsu testing
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.