ELECTRICAL AND STARTING SYSTEM
SWITCH GPWIRING GP
STARTING AID GP
WIRING GP
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
#SEBP56230250
158-6634: SWITCH GP-TOGGLE
158-6634 SWITCH GP-TOGGLE -SECONDARY SHUTDOWN
S/N KAY2000-UP
PART OF 313-1114 BATTERY & WIRING GP
S/N KAY2000-UP
PART OF 313-1114 BATTERY & WIRING GP
For full view, you need register
Parts for your M325D L MH EXCAVATOR:
#SEBP56230251
165-5970: SWITCH GP-TOGGLE
165-5970 SWITCH GP-TOGGLE -FUEL PRIMING PUMP
S/N KAY2000-UP
PART OF 259-5053 WIRING GP-FUEL SYSTEM
S/N KAY2000-UP
PART OF 259-5053 WIRING GP-FUEL SYSTEM
For full view, you need register
Parts for your M325D L MH EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | |
| 2. | 6T-3632 | [1] | LOCKWASHER | |
| 3. | 6T-3633 | [1] | RING-LOCKING | |
| 4. | 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5. | 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 6. | 112-4550 E | SLEEVE (15-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
#SEBP56230252
249-6923: SWIVEL GP-ELECTRIC
249-6923 SWIVEL GP-ELECTRIC
S/N KAY2000-2038
PART OF 303-9264 WIRING GP-STABILIZER
FIELD REPLACEMENT FOR @@@@@364-2801@@@@@
S/N KAY2000-2038
PART OF 303-9264 WIRING GP-STABILIZER
FIELD REPLACEMENT FOR @@@@@364-2801@@@@@
For full view, you need register
Parts for your M325D L MH EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 261-2422 | [1] | COVER | |
| 2. | 195-9770 | [1] | SEAL-O-RING | |
| 3. | 242-8819 | [1] | PLUG AS | |
| 4. | 5C-8312 M | [3] | NUT (M4X0.7-THD) | |
| 5. | 3B-4501 | [3] | LOCKWASHER | |
| 6. | 178-9983 M | [4] | LOCKNUT (M4X0.7-THD) | |
| 7. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 8. | 5C-2890 M | [4] | NUT (M6X1-THD) | |
| 9. | 3B-4504 | [4] | LOCKWASHER | |
| 10. | 8T-8729 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 11. | 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | |
| 12. | 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | |
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 13. | 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 14. | 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | |
| 15. | 8T-8730 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | |
| M | METRIC PART | |||
#SEBP56230253
364-2801: SWIVEL GP-ELECTRIC
364-2801 SWIVEL GP-ELECTRIC
S/N KAY2000-UP
FIELD REPLACEMENT ORDER @@@@@249-6923@@@@@
S/N KAY2000-UP
FIELD REPLACEMENT ORDER @@@@@249-6923@@@@@
For full view, you need register
Parts for your M325D L MH EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 379-0958 | [1] | COVER | |
| 2. | 379-0959 | [1] | WASHER-PLASTIC | |
| 3. | 5C-2874 M | [1] | NUT (M5X0.8-THD) | |
| 4. | 151-9274 | [1] | KIT-RECEPTACLE (4-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5. | 171-0596 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | |
| 6. | 9X-3402 | [7] | SOCKET-CONNECTOR (16-GA TO 18-GA) | |
| 7. | 9X-3401 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| M | METRIC PART | |||
#SEBP56230254
377-1954: SWIVEL GP-ELECTRIC
377-1954 SWIVEL GP-ELECTRIC
S/N KAY2039-UP
7-PIN
PART OF 303-9264 WIRING GP-STABILIZER
S/N KAY2039-UP
7-PIN
PART OF 303-9264 WIRING GP-STABILIZER
For full view, you need register
Parts for your M325D L MH EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 379-0958 | [1] | COVER | |
| 2. | 379-0959 | [1] | WASHER-PLASTIC | |
| 3. | 5C-2874 M | [1] | NUT (M5X0.8-THD) | |
| 4. | 151-9274 | [1] | KIT-RECEPTACLE (4-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5. | 171-0596 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | |
| 6. | 9X-3402 | [7] | SOCKET-CONNECTOR (16-GA TO 18-GA) | |
| 7. | 9X-3401 | [7] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| M | METRIC PART | |||
#SEBP56230255
239-1134: VALVE GP-ETHER STARTING
239-1134 VALVE GP-ETHER STARTING
S/N KAY2000-UP
24-VOLT
PART OF 239-6676 STARTING AID GP-ETHER
S/N KAY2000-UP
24-VOLT
PART OF 239-6676 STARTING AID GP-ETHER
For full view, you need register
#SEBP56230256
251-0439: WIRING GP-BOOM FLOAT
251-0439 WIRING GP-BOOM FLOAT
S/N KAY2000-UP
PART OF 286-4714 CONTROL AR-BOOM
Type 1
S/N KAY2000-UP
PART OF 286-4714 CONTROL AR-BOOM
Type 1
For full view, you need register
Parts for your M325D L MH EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [16] | STRAP-CABLE | |
| 2. | 7K-1181 | [8] | STRAP-CABLE | |
| 3. | 111-4836 | [2] | CLIP | |
| 4. | 116-0118 | [2] | CLIP | |
| 5. | 204-1611 | [9] | STRAP (DUAL) | |
| 6. | 267-7964 | [1] | HARNESS AS-SENSOR | |
| 186-3735 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [10] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [3] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 243-4506 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 243-4507 | [1] | RECEPTACLE AS-CONNECTOR (4-PIN) | ||
| 3S-2093 | [1] | STRAP-CABLE | ||
| 125-7874 BE | TUBE-HEAT SHRINK (5.72-MM DIA) | |||
| 125-7875 BE | TUBE-HEAT SHRINK (7.44-MM DIA) | |||
| 7. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 8. | 6G-2263 | [1] | SPACER (10.5X19X28.5-MM THK) | |
| 9. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 11. | 8T-4199 M | [1] | BOLT (M8X1.25X12-MM) | |
| 12. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP56230257
251-0439: WIRING GP-BOOM FLOAT
251-0439 WIRING GP-BOOM FLOAT
S/N KAY2000-UP
PART OF 286-4714 CONTROL AR-BOOM
Type 2
S/N KAY2000-UP
PART OF 286-4714 CONTROL AR-BOOM
Type 2
For full view, you need register
Parts for your M325D L MH EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [16] | STRAP-CABLE | |
| 2. | 7K-1181 C | [9] | STRAP-CABLE | |
| 3. | 111-4836 | [2] | CLIP | |
| 4. | 116-0118 C | [1] | CLIP | |
| 5. | 204-1611 C | [10] | STRAP (DUAL) | |
| 6. | 267-7964 | [1] | HARNESS AS-SENSOR | |
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [10] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [1] | STRAP-CABLE | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 243-4506 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 243-4507 | [1] | RECEPTACLE AS-CONNECTOR (4-PIN) | ||
| 7. | 4P-7428 C | [1] | CLIP (LADDER) | |
| 8. | 6G-2263 | [1] | SPACER (10.5X19X28.5-MM THK) | |
| 9. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 11. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP56230258
272-2253: WIRING GP-CAB
For full view, you need register
Parts for your M325D L MH EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8016 | [1] | RESISTOR AS (BACKUP)(BACKUP) | |
| 2. | 113-8490 | [13] | FUSE (10-AMPERE) | |
| 3. | 113-8491 | [12] | FUSE (15-AMPERE) | |
| 4. | 113-8493 | [2] | FUSE (25-AMPERE) | |
| 5. | 124-3548 | [2] | FUSE (30-AMPERE) | |
| 6. | 141-2759 | [8] | FUSE (5-AMPERE) | |
| 7. | 161-3128 | [1] | RELAY (24-VOLT)(BOOM FLOODLIGHT) | |
| 7A. | 161-3128 | [1] | RELAY (24-VOLT)(HORN) | |
| 7B. | 161-3128 | [1] | RELAY (24-VOLT)(MATERIAL HANDLER LOCK CANCEL) | |
| 7C. | 161-3128 | [1] | RELAY (24-VOLT)(HYD CAB RISER SPEED LIMIT) | |
| 7D. | 161-3128 | [1] | RELAY (24-VOLT)(GRAPPLE) | |
| 7E. | 161-3128 | [1] | RELAY (24-VOLT)(WIPER) | |
| 8. | 170-6888 | [1] | PULLER-FUSE | |
| 9. | 241-8368 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY) | |
| 10. | 346-5495 | [1] | RELAY AS (24-VOLT)(WIPER) | |
| 11. | 274-5413 | [1] | HARNESS AS-CAB | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7Y-3950 | [2] | TERMINAL-BLADE (14-GA TO 20-GA)(MALE) | ||
| 7Y-3951 | [3] | TERMINAL-BLADE (14-GA)(FEMALE) | ||
| 7Y-3952 | [2] | PLUG-CONNECTOR (2-PIN) | ||
| 7Y-3963 | [1] | TERMINAL-BULLET (FEMALE)(FEMALE) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 102-7964 | [2] | PLUG-CONNECTOR (16-PIN) | ||
| 111-4815 | [1] | PLUG-CONNECTOR (7-PIN) | ||
| 116-0255 | [1] | TERMINAL-BLADE (10-GA TO 20-GA)(FEMALE) | ||
| 119-3662 BE | TUBE-HEAT SHRINK (10.85-MM DIA) | |||
| 102-7965 | [49] | TERMINAL (FEMALE) | ||
| 124-0010 | [5] | TERMINAL (12-GA TO 16-GA) | ||
| 125-4841 | [2] | WEDGE-PLUG LOCK (21-PIN) | ||
| 125-4838 | [1] | WEDGE-PLUG LOCK (7-PIN) | ||
| 125-7874 BE | TUBE-HEAT SHRINK (5.72-MM DIA) | |||
| 125-7875 BE | TUBE-HEAT SHRINK (7.44-MM DIA) | |||
| 9X-3402 | [9] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [9] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8067 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 2L-8050 | [1] | TERMINAL-RING (6-GA, 1/4-IN SCREW) | ||
| -OR- | ||||
| 2L-8058 | [1] | TERMINAL-RING (8-GA, 1/4-IN SCREW) | ||
| 134-3296 | [1] | HOUSING-PLUG | ||
| 134-3297 | [1] | SEAL | ||
| 149-5069 | [13] | TERMINAL-BLADE (14-GA TO 20-GA)(FEMALE) | ||
| 149-5070 | [19] | TERMINAL-BLADE (16-GA TO 20-GA)(FEMALE) | ||
| 149-5071 | [4] | TERMINAL-BLADE (12-GA TO 14-GA)(FEMALE) | ||
| 153-2602 | [2] | RECEPTACLE-CONNECTOR (1-PIN) | ||
| 153-2631 | [2] | TERMINAL (14-GA TO 20-GA) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 163-6803 | [1] | PLUG-CONNECTOR (5-PIN) | ||
| 167-3487 | [1] | WEDGE-PLUG LOCK (5-PIN) | ||
| 170-6890 | [11] | TERMINAL-BLADE (14-GA) | ||
| 170-6891 | [18] | TERMINAL-BLADE (16-GA TO 18-GA) | ||
| 179-9046 | [1] | TERMINAL (14-GA TO 20-GA) | ||
| 189-3158 | [2] | SUPPRESSOR-ARC | ||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 238-2319 | [1] | BASE AS (FUSE, RELAY PANEL) | ||
| 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | ||
| 095-0742 M | [2] | SCREW-MACHINE (M6X1X16-MM) | ||
| 170-9394 | [40] | TERMINAL | ||
| 238-2363 | [4] | TERMINAL (FEMALE) | ||
| 12. | 280-1375 | [1] | WIRE AS | |
| 13. | 280-1376 | [1] | WIRE AS | |
| 14. | 095-0742 M | [4] | SCREW-MACHINE (M6X1X16-MM) | |
| 15. | 096-0061 B | [3] | STRAP-CABLE | |
| 16. | 132-5789 | [1] | CLIP (LADDER) | |
| 17. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 18. | 6V-7357 M | [2] | BOLT (M6X1X25-MM) | |
| 19. | 7X-2619 M | [1] | BOLT (M6X1X10-MM) | |
| 20. | 8T-0087 | [1] | LOCKWASHER | |
| 21. | 8T-0286 M | [1] | BOLT (M5X0.8X8-MM) | |
| 22. | 8T-4171 M | [2] | BOLT (M6X1X12-MM) | |
| 23. | 9X-2042 M | [1] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 24. | 9X-8256 | [9] | WASHER (6.6X12X2-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56230259
284-8650: WIRING GP-CAB
For full view, you need register
Parts for your M325D L MH EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 149-5050 | [1] | RELAY (24-VOLT)(BOOM FLOAT, DISABLE) | |
| 1A. | 149-5050 | [1] | RELAY (24-VOLT)(BOOM FLOAT UP) | |
| 2. | 161-3128 | [1] | RELAY (24-VOLT)(BOOM FLOAT DOWN) | |
| 3. | 236-3941 | [1] | SWITCH AS-ROCKER (SMARTBOOM)(BOOM FLOAT) | |
| 111-7899 | [1] | GASKET | ||
| 4. | 284-8649 | [1] | HARNESS AS-CAB | |
| 163-6803 | [2] | PLUG-CONNECTOR (5-PIN) | ||
| 5. | 096-0061 B | [3] | STRAP-CABLE | |
| 6. | 8T-0286 M | [2] | BOLT (M5X0.8X8-MM) | |
| 7. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
Information:
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
Troubleshooting
CID 0091 FMI 02 Incorrect Throttle Switch inputs
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Fuel Filter Differential Pressure Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
Engine Shutdown Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
CID 2766 FMI 02 Intermediate Engine Speed Switch erratic, intermittent, or incorrect
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer
