ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP56240200
350-9368: WIRING GP-CAB
For full view, you need register
Parts for your M316D WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | |
| 2. | 167-3593 | [1] | STRAP | |
| 3. | 193-9056 | [1] | SWITCH AS-ROCKER (HAZARD WARNING LIGHTS) | |
| 4. | 193-9057 | [1] | SWITCH AS-ROCKER (HEADLIGHT) | |
| (EACH SWITCH AS-ROCKER INCLUDES) | ||||
| 111-7899 | [1] | GASKET | ||
| 5. | 219-5762 | [1] | HARNESS AS-SENSOR (PUMP) | |
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 114-8843 E | SLEEVE-PLASTIC (40-CM) | |||
| 6. | 238-2318 | [1] | LIGHTER AS-CIGAR (24-VOLT) | |
| 7. | 337-5751 | [1] | SWITCH AS-ROCKER (FLOODLIGHT) | |
| 111-7899 | [1] | GASKET | ||
| 8. | 338-2368 | [1] | PLUG-BUTTON | |
| 9. | 350-9369 | [1] | HARNESS AS-CAB (CONSOLE) | |
| 111-7898 | [3] | CONNECTOR (8-PIN) | ||
| 142-9117 | [1] | CONNECTOR (10-PIN) | ||
| 5P-6271 | [1] | CONNECTOR AS | ||
| 7Y-3952 | [2] | PLUG-CONNECTOR (2-PIN) | ||
| 125-4784 | [1] | PLUG-CONNECTOR (12-PIN) | ||
| 138-5184 | [1] | PLUG-CONNECTOR (20-PIN) | ||
| 9X-3401 | [57] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [57] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4009 | [2] | PLUG AS-CONNECTOR (12-PIN) | ||
| 241-8834 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| (EACH PLUG AS-CONNECTOR INCLUDES) | ||||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 324-5678 | [2] | RESISTOR AS (120-OHM) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [8] | PLUG-SEAL | ||
| 230-4010 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 230-4012 | [2] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 230-5011 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 231-2300 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 231-2301 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 239-7357 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 263-4725 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 9W-1951 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 126-1766 | [22] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 8T-8730 | [12] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [3] | STRAP-CABLE | ||
| 8L-8413 | [10] | STRAP-CABLE (WHITE) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 5W-1987 | [7] | TERMINAL-BLADE (12-GA TO 16-GA) | ||
| 128-4178 | [3] | TERMINAL AS | ||
| (EACH INCLUDES) | ||||
| 2L-8068 | [1] | TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW) | ||
| 5P-6006 D | TUBE-HEAT SHRINK (9.52-MM DIA)(1-M) | |||
| 2L-8075 | [3] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 128-4168 | [1] | TERMINAL AS | ||
| 091-2436 | [1] | TERMINAL-BLADE (18-GA TO 22-GA) | ||
| 104-1995 | [26] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 7Y-3951 | [4] | TERMINAL-BLADE (14-GA) | ||
| 125-4785 | [33] | TERMINAL (FEMALE) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(85-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 10. | 352-3209 | [1] | FRAME | |
| 11. | 354-6988 | [1] | PANEL AS-SWITCH | |
| 12. | 095-0723 M | [3] | SCREW-SPECIAL (M3X0.5X10-MM) | |
| 13. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 14. | 6V-9498 | [1] | WASHER-HARD (3.2X7X0.5-MM THK) | |
| 15. | 3F-9556 | [2] | LOCKWASHER | |
| 16. | 3S-2093 B | [6] | STRAP-CABLE | |
| 17. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 18. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 19. | 6V-5210 M | [4] | SCREW-MACHINE (M4X0.7X10-MM) | |
| 20. | 7K-1181 B | [2] | STRAP-CABLE | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP56240201
377-1847: WIRING GP-CAB
For full view, you need register
Parts for your M316D WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | |
| 2. | 167-3593 | [1] | STRAP | |
| 3. | 193-9056 | [1] | SWITCH AS-ROCKER (HAZARD WARNING LIGHTS) | |
| 4. | 193-9057 | [1] | SWITCH AS-ROCKER (HEADLIGHT) | |
| (EACH SWITCH AS INCLUDES) | ||||
| 111-7899 | [1] | GASKET | ||
| 5. | 219-5762 | [1] | HARNESS AS-SENSOR (PUMP) | |
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 114-8843 E | SLEEVE-PLASTIC (40-CM) | |||
| 6. | 238-2318 | [1] | LIGHTER AS-CIGAR (24-VOLT) | |
| 7. | 337-5751 | [1] | SWITCH AS-ROCKER (FLOODLIGHT) | |
| 111-7899 | [1] | GASKET | ||
| 8. | 338-2368 | [1] | PLUG-BUTTON | |
| 9. | 352-3209 | [1] | FRAME | |
| 10. | 476-0305 | [1] | PANEL AS-CONTROL | |
| 483-1262 | [1] | KNOB | ||
| 11. | 377-1848 Y | [1] | HARNESS AS-CAB | |
| 12. | 095-0723 M | [3] | SCREW-SPECIAL (M3X0.5X10-MM) | |
| 13. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 14. | 6V-9498 | [3] | WASHER-HARD (3.2X7X0.5-MM THK) | |
| 15. | 3F-9556 | [2] | LOCKWASHER | |
| 16. | 3S-2093 B | [6] | STRAP-CABLE | |
| 17. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 18. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 19. | 6V-5210 M | [4] | SCREW-MACHINE (M4X0.7X10-MM) | |
| 20. | 7K-1181 B | [2] | STRAP-CABLE | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56240202
377-1847: WIRING GP-CAB
For full view, you need register
Parts for your M316D WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 B | [2] | STRAP-CABLE | |
| 3. | 193-9056 | [1] | SWITCH AS-ROCKER (HAZARD WARNING LIGHTS) | |
| 4. | 193-9057 | [1] | SWITCH AS-ROCKER (HEADLIGHT) | |
| (EACH SWITCH AS INCLUDES) | ||||
| 111-7899 | [1] | GASKET | ||
| 5. | 219-5762 | [1] | HARNESS AS-SENSOR (PUMP) | |
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 114-8843 E | SLEEVE-PLASTIC (40-CM) | |||
| 6. | 238-2318 | [1] | LIGHTER AS-CIGAR (24-VOLT) | |
| 7. | 337-5751 | [1] | SWITCH AS-ROCKER (FLOODLIGHT) | |
| 111-7899 | [1] | GASKET | ||
| 8. | 338-2368 | [1] | PLUG-BUTTON | |
| 9. | 352-3209 | [1] | FRAME | |
| 10. | 476-0305 | [1] | PANEL AS-CONTROL | |
| 483-1262 | [1] | KNOB | ||
| 11. | 476-0308 CY | [1] | HARNESS AS-CAB | |
| 13. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 15. | 3F-9556 | [2] | LOCKWASHER | |
| 16. | 3S-2093 B | [6] | STRAP-CABLE | |
| 17. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 18. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 19. | 6V-5210 M | [4] | SCREW-MACHINE (M4X0.7X10-MM) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56240203
377-1849: WIRING GP-CAB
For full view, you need register
Parts for your M316D WHEELED EXCAVATOR:
CATERPILLAR SIS#SEBP56240204
337-5816: WIRING GP-CAMERA
For full view, you need register
Parts for your M316D WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 251-4169 | [1] | CABLE AS-COMMUNICATION (11-M) | |
| 2. | 265-5571 | [1] | PLATE | |
| 3. | 337-5775 Y | [1] | BRACKET GP-MOUNTING (REAR VIEW, CAMERA) | |
| 4. | 3S-2093 B | [15] | STRAP-CABLE | |
| 5. | 4P-7581 | [1] | CLIP (LADDER) | |
| 6. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 7. | 7K-1181 B | [5] | STRAP-CABLE | |
| 8. | 8T-4908 M | [2] | BOLT (M8X1.25X25-MM) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56240205
337-5756: WIRING GP-CHASSIS
For full view, you need register
Parts for your M316D WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 120-5967 | [1] | SOCKET-WIRING | |
| 2. | 121-5327 | [1] | GROMMET | |
| 3. | 132-1805 | [1] | STRAP AS-GROUND | |
| 4. | 337-5757 | [1] | HARNESS AS-CHASSIS (ELECTRIC) | |
| 289-3195 E | CONDUIT (131-CM) | |||
| 123-7615 | [3] | CONNECTOR (1-PIN) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [10] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [4] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [3] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 231-2297 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 264-7033 | [1] | SEAL-CONNECTOR | ||
| 239-7356 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 230-5009 | [1] | RECEPTACLE AS-CONNECTOR (4-PIN) | ||
| 104-6692 | [7] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 214-0864 | [1] | RECEPTACLE AS (4-PIN) | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8730 | [49] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [10] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [32] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [32] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 5P-3454 | [1] | TERMINAL-RING (4-GA, 5/16-IN SCREW) | ||
| 131-1489 | [3] | TERMINAL AS-RING (6-GA TO 8-GA) | ||
| (EACH INCLUDES) | ||||
| 6H-3592 | [1] | TERMINAL-RING (6-GA TO 8-GA, 5/16-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM) | |||
| 131-1490 | [1] | TERMINAL AS (6-GA TO 8-GA) | ||
| 6H-3587 | [1] | TERMINAL-RING (6-GA TO 8-GA, 3/8-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM) | |||
| 131-1497 | [1] | TERMINAL AS-RING (10-GA TO 12-GA) | ||
| 2L-8068 | [1] | TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM) | |||
| 2L-8076 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 201-4022 | [1] | TERMINAL AS (6-GA) | ||
| 104-1995 | [6] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(50-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 5. | 096-0192 | [1] | LOCKWASHER | |
| 6. | 124-7346 | [1] | LOCKWASHER | |
| 7. | 3F-9556 | [6] | LOCKWASHER | |
| 8. | 3S-2093 B | [38] | STRAP-CABLE | |
| 9. | 4P-7428 | [1] | CLIP (LADDER) | |
| 10. | 5C-2874 M | [1] | NUT (M5X0.8-THD) | |
| 11. | 5C-7261 M | [3] | NUT (M8X1.25-THD) | |
| 12. | 5P-4116 | [3] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 13. | 7K-1181 B | [15] | STRAP-CABLE | |
| 14. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 16. | 144-0195 E | HOSE (400-CM) | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP56240206
337-5766: WIRING GP-CHASSIS
For full view, you need register
Parts for your M316D WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 337-5767 | [1] | HARNESS AS-CHASSIS (ELECTRONIC) | |
| 342-2972 | [1] | CAP-CONNECTOR (2-PIN) | ||
| 342-2973 | [2] | CAP-CONNECTOR (3-PIN) | ||
| 342-2974 | [1] | CAP-CONNECTOR (6-PIN) | ||
| 342-2975 | [1] | CAP-CONNECTOR (8-PIN) | ||
| 126-1774 | [2] | COVER-CONNECTOR | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [19] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 147-1445 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 147-1446 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [6] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [17] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4011 | [2] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 230-5010 | [2] | PLUG AS-CONNECTOR (6-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 231-2295 | [2] | PLUG AS-CONNECTOR (8-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7033 | [1] | SEAL-CONNECTOR | ||
| 231-2296 | [1] | PLUG AS-CONNECTOR (8-PIN) | ||
| 264-7033 | [1] | SEAL-CONNECTOR | ||
| 237-0227 | [3] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 238-8245 | [2] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 239-7352 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 281-8801 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 281-8811 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 324-5678 | [1] | RESISTOR AS (120-OHM) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 238-8247 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [85] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 230-4010 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 230-4012 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 230-5011 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 104-6692 | [9] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 214-0864 | [1] | RECEPTACLE AS (4-PIN) | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 274-3779 | [1] | CAP-SEAL | ||
| 8T-8730 | [31] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [1] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [33] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [135] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [135] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 3S-2093 | [4] | STRAP-CABLE | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 131-1497 | [4] | TERMINAL AS-RING (10-GA TO 12-GA) | ||
| (EACH INCLUDES) | ||||
| 2L-8068 | [1] | TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM) | |||
| 2L-8078 | [1] | TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(150-CM) | |||
| 2. | 3S-2093 B | [33] | STRAP-CABLE | |
| 3. | 7K-1181 B | [23] | STRAP-CABLE | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP56240207
337-5810: WIRING GP-CHASSIS
For full view, you need register
Parts for your M316D WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6C-9089 | [1] | NUT-CAP | |
| 2. | 261-7642 | [1] | BRACKET | |
| 3. | 337-5805 | [1] | HARNESS AS-ENGINE (ECM) | |
| 122-8912 | [1] | CAP | ||
| 245-1045 | [1] | COVER | ||
| 245-1044 | [2] | LOCK-CONNECTOR | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDFES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 245-1042 | [1] | PLUG AS-CONNECTOR (64-PIN) | ||
| 267-7207 M | [1] | BOLT-SPECIAL (M6X1-THD) | ||
| 267-7208 | [1] | RING-RETAINING | ||
| 274-4990 | [1] | SEAL | ||
| 324-5678 | [1] | RESISTOR AS (120-OHM) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 202-4990 | [1] | PLUG-CONNECTOR | ||
| 245-1048 | [39] | PLUG-CONNECTOR (1-PIN) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 230-4012 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 185-1861 | [2] | SEAL-WIRE | ||
| 307-2338 E | SLEEVE (13-CM) | |||
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [17] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 267-9572 | [25] | SOCKET-CONNECTION (18-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 131-1489 | [1] | TERMINAL AS-RING (6-GA TO 8-GA) | ||
| 6H-3592 | [1] | TERMINAL-RING (6-GA TO 8-GA, 5/16-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM) | |||
| 2L-8069 | [1] | TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW) | ||
| 2L-8076 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 364-2790 | [1] | TERMINAL AS (10-GA) | ||
| 235-4123 | [2] | TERMINAL (18-GA TO 20-GA) | ||
| 115-1185 | [1] | RING-TERMINAL | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 4. | 096-0192 | [1] | LOCKWASHER | |
| 5. | 130-1673 M | [1] | BOLT-SOCKET HEAD (M16X2X35-MM) | |
| 6. | 204-2281 | [2] | STRAP-CABLE | |
| 7. | 293-9452 | [2] | MOUNTING-CABLE TIE | |
| 8. | 3S-2093 B | [12] | STRAP-CABLE | |
| 9. | 5C-2874 M | [1] | NUT (M5X0.8-THD) | |
| 10. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 11. | 5C-9553 M | [1] | BOLT (M6X1X16-MM) | |
| 12. | 6V-7357 M | [1] | BOLT (M6X1X25-MM) | |
| 13. | 9X-8256 | [3] | WASHER (6.6X12X2-MM THK) | |
| 14. | 9X-8257 | [2] | WASHER (17.5X30X3.5-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP56240208
337-5752: WIRING GP-CONSOLE
For full view, you need register
Parts for your M316D WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 194-7843 | [1] | MAGNET | |
| 2. | 220-5815 | [6] | SCREW-PAN HEAD | |
| 3. | 240-1366 | [1] | SWITCH AS-POSITION (JOYSTICK) | |
| 4. | 322-8964 | [1] | SWITCH AS-START (KEY)(ENGINE) | |
| 7T-6799 | [1] | NUT-MOUNTING (1-32-THD) | ||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 243-4507 | [1] | RECEPTACLE AS-CONNECTOR (4-PIN) | ||
| 5. | 337-5753 | [1] | HARNESS AS-CONSOLE | |
| 292-2896 E | CONDUIT (176-CM) | |||
| 111-7898 | [4] | CONNECTOR (8-PIN) | ||
| 9X-3401 | [22] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS,WEDGE & INTRFACE SEAL) | ||||
| 230-5008 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 264-7031 | [1] | SEAL-CONNECTOR | ||
| 231-2295 | [1] | PLUG AS-CONNECTOR (8-PIN) | ||
| 264-7033 | [1] | SEAL-CONNECTOR | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 239-7353 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 241-8835 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 281-8812 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 8T-8730 | [18] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3402 | [11] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 5W-1987 | [2] | TERMINAL-BLADE (12-GA TO 16-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 104-1995 | [18] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 6. | 337-5811 | [1] | PLATE | |
| 7. | 095-0723 M | [4] | SCREW-SPECIAL (M3X0.5X10-MM) | |
| 8. | 096-5962 | [8] | WASHER-HARD (3.4X7X0.8-MM THK) | |
| 9. | 190-4375 | [1] | WASHER (26X40X2-MM THK) | |
| 10. | 3S-2093 | [8] | STRAP-CABLE | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP56240209
377-1851: WIRING GP-CONSOLE
For full view, you need register
Parts for your M316D WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 194-7843 | [1] | MAGNET | |
| 2. | 220-5815 | [6] | SCREW-PAN HEAD | |
| 3. | 486-1633 | [1] | SWITCH AS-POSITION (ARMREST) | |
| 4. | 322-8964 J | [1] | SWITCH AS-START (KEY)(ENGINE) | |
| 7T-6799 | [1] | NUT-MOUNTING (1-32-THD) | ||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 243-4507 | [1] | RECEPTACLE AS-CONNECTOR (4-PIN) | ||
| 5. | 337-5811 | [1] | PLATE | |
| 6. | 377-1852 Y | [1] | HARNESS AS-CONSOLE | |
| 7. | 095-0723 M | [4] | SCREW-SPECIAL (M3X0.5X10-MM) | |
| 8. | 096-5962 | [8] | WASHER-HARD (3.4X7X0.8-MM THK) | |
| 9. | 190-4375 | [1] | WASHER (26X40X2-MM THK) | |
| 10. | 3S-2093 B | [8] | STRAP-CABLE | |
| B | USE AS REQUIRED | |||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Special Instruction
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Caterpillar Parts SIS Catalog M316D :
Truck sale:
55,000
