AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

337-5778 WIRING GP-STABILIZER -FRONT & REAR, LH & RH S/N D2W1-UP PART OF 354-7128, 354-7134, 354-7142, 358-2165 UNDERCARRIAGE AR M322D


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
AXLE GP
COUPLING GP

WHEELED EXCAVATOR M322D WHEELED EXCAVATOR D2W
 M322D Excavator D2W00001-UP (MACHINE) POWERED BY C6.6 Engine SEBP5626 M322D D2W   (2011)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-MONITOR
337-5814 WIRING GP-MONITOR
WIRING GP-RIDE CONTROL
337-5792 WIRING GP-RIDE CONTROL
WIRING GP-STABILIZER
337-5778 WIRING GP-STABILIZER
WIRING GP-STABILIZER
364-2785 WIRING GP-STABILIZER
WIRING GP-UNDERCARRIAGE/SWIVEL
242-5028 WIRING GP-UNDERCARRIAGE/SWIVEL
WIRING GP-WORK TOOL
337-5784 WIRING GP-WORK TOOL
 

#SEBP56260200
 

337-5778: WIRING GP-STABILIZER

337-5778 WIRING GP-STABILIZER -FRONT & REAR, LH & RH
S/N D2W1-UP
PART OF 354-7128, 354-7134, 354-7142, 358-2165 UNDERCARRIAGE AR
i04169369 SEBP5626
3375778 WIRING GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your M322D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 337-5779 [1] HARNESS AS-CONSOLE (STABILIZER)  
  292-2896 E CONDUIT (61-CM)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8L-8413 [8] STRAP-CABLE (WHITE)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  104-1995 [16] TERMINAL-BLADE (14-GA TO 18-GA)  
  111-7898 [4] CONNECTOR (8-PIN)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  230-5008 [1] PLUG AS-CONNECTOR (4-PIN)  
  264-7031 [1] SEAL-CONNECTOR  
2. 7K-1181 B [3] STRAP-CABLE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP56260201
 

364-2785: WIRING GP-STABILIZER

364-2785 WIRING GP-STABILIZER -UNDERCARRIAGE
S/N D2W1-UP
PART OF 354-7128, 354-7134, 354-7142, 358-2165 UNDERCARRIAGE AR
i04169489 SEBP5626
3642785 WIRING GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your M322D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5C-9553 M [2] BOLT (M6X1X16-MM)  
2. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
3. 175-3350 [1] PLUG AS-CONNECTOR  
4. 175-3352 [1] PLUG AS-CONNECTOR  
5. 199-6978 [1] ROD  
6. 237-0075 [1] HARNESS AS-SENSOR (TRAVEL SPEED)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDE RECEPTACLE AS & WEDGE)
  114-8843 E SLEEVE-PLASTIC (25-CM)  
  128-4178 [1] TERMINAL AS  
  2L-8068 [1] TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW)  
  5P-6006 D TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M)  
7. 249-6923 Y [1] SWIVEL GP-ELECTRIC  
8. 364-2786 [1] HARNESS AS-SOLENOID  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDE RECEPTACLE AS & WEDGE)
  104-6692 [2] RECEPTACLE AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  8T-8737 [2] PLUG-SEAL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDE RECEPTACLE AS & WEDGE)
  8T-8730 [8] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  131-1497 [1] TERMINAL AS-RING (10-GA TO 12-GA)  
  2L-8068 [1] TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM)  
9. 3F-9556 [1] LOCKWASHER  
10. 3S-2093 B [24] STRAP-CABLE  
11. 5C-7261 M [1] NUT (M8X1.25-THD)  
12. 155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
13. 155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDEG & INTERFACE SEAL)
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56260202
 

242-5028: WIRING GP-UNDERCARRIAGE/SWIVEL

242-5028 WIRING GP-UNDERCARRIAGE/SWIVEL
S/N D2W1-UP
PART OF 354-7147 UNDERCARRIAGE AR
i02174459 SEBP5626
2425028 WIRING GP-UNDERCARRIAGE/SWIVEL Parts scheme
  For full view, you need register

Parts for your M322D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
2. 199-6978 [1] ROD  
3. 237-0075 [1] HARNESS AS-SENSOR (TRAVEL SPEED)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  114-8843 E SLEEVE-PLASTIC (25-CM)  
  128-4178 [1] TERMINAL AS  
  2L-8068 [1] TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW)  
  5P-6006 L [1] TUBE-HEAT SHRINK (9.52-MM DIA)(10-DM)  
4. 377-1953 Y [1] SWIVEL GP-ELECTRIC  
5. 355-4378 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6. 3F-9556 [2] LOCKWASHER  
7. 3S-2093 [5] STRAP-CABLE  
8. 5C-7261 M [1] NUT (M8X1.25-THD)  
9. 5C-9553 M [2] BOLT (M6X1X16-MM)  
10. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  L   ORDER BY THE DECIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56260203
 

337-5784: WIRING GP-WORK TOOL

337-5784 WIRING GP-WORK TOOL -MULTIFUNCTION COMBINED VALVE
S/N D2W1-UP
PART OF 357-6465 VALVE & LINES AR
i04158493 SEBP5626
3375784 WIRING GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your M322D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 337-5785 [1] HARNESS AS-WORK TOOL  
  230-5011 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [8] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
2. 3S-2093 B [2] STRAP-CABLE  
3. 7K-1181 B [2] STRAP-CABLE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP56260204
 

331-1410: AXLE & TRANSMISSION AR

331-1410 AXLE & TRANSMISSION AR -REAR
S/N D2W1-UP
PART OF 241-7438 AXLE AR-REAR
i05067491 SEBP5626
3311410 AXLE & TRANSMISSION AR Parts scheme
  For full view, you need register

Parts for your M322D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 416-1918 Y [1] TRANSMISSION GP (DIRECT DRIVE)  
2. 333-8031 [2] HOUSING-AXLE  
3. 333-8044 [2] SHAFT-AXLE  
4. 333-8034 [1] HOUSING  
5. 110-0181 B [2] RING (2-MM THK)  
  110-0182 B [2] RING (1.95-MM THK)  
  110-0183 B [2] RING (1.9-MM THK)  
  110-0184 B [2] RING (1.85-MM THK)  
  098-2962 B [2] SHIM (1.8-MM THK)  
  098-2960 B [2] SHIM (1.6-MM THK)  
  098-2959 B [2] SHIM (1.5-MM THK)  
  098-2958 B [2] SHIM (1.4-MM THK)  
  098-2957 B [2] SHIM (1.3-MM THK)  
  110-0191 B [2] RING (1.25-MM THK)  
  6T-8668 B [2] SHIM (1.2-MM THK)  
  110-0192 B [2] RING (1.15-MM THK)  
  6T-8669 B [2] SHIM (1.1-MM THK)  
  110-0193 B [2] RING (1.05-MM THK)  
  6T-8670 B [2] SHIM (1-MM THK)  
  110-0194 B [2] RING (0.95-MM THK)  
  110-0195 B [2] RING (0.9-MM THK)  
  110-0167 B [2] WASHER (90X99.8X0.85-MM THK)  
  6T-8671 B [2] SHIM (0.8-MM THK)  
  110-0168 B [2] WASHER (90X99.8X0.75-MM THK)  
  6T-8672 B [2] SHIM (0.7-MM THK)  
  110-0169 B [2] WASHER (90X99.8X0.65-MM THK)  
  6T-8673 B [2] SHIM (0.6-MM THK)  
  6T-8674 B [2] SHIM (0.5-MM THK)  
  110-0177 B [2] WASHER (90X99.8X0.45-MM THK)  
  6T-8675 B [2] SHIM (0.4-MM THK)  
  110-0178 B [2] WASHER (90X99.8X0.35-MM THK)  
  110-0180 B [2] WASHER (90X99.8X0.3-MM THK)  
  193-1125 B [2] SHIM (0.1-MM THK)  
  193-1127 B [2] SHIM (0.15-MM THK)  
35. 8U-2306 [1] BEARING  
36. 110-2463 [1] BEARING-ROLLER  
37. 270-4969 [2] SEAL-O-RING  
38. 336-7380 M [36] BOLT (M18X2.5X65-MM)  
39. 333-8037 [20] STUD-WHEEL  
40. 263-3629 [3] PLUG AS  
    (EACH INCLUDES)
  203-0215 [1] SEAL-O-RING  
41. 203-0215 [1] SEAL-O-RING  
42. 263-3630 [1] PLUG AS-MAGNET (AXLE)  
43. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
44. 6V-8149 M [10] NUT (M12X1.75-THD)  
45. 372-4118 [1] GEAR-CROWN  
46. 331-1401 [2] WASHER-THRUST  
47. 366-0492 [2] GEAR-DIFFERENTIAL  
48. 366-0493 [4] GEAR-DIFFERENTIAL  
49. 331-1404 [4] WASHER-THRUST  
50. 366-0494 [2] RING  
51. 333-8013 [1] CASE-DIFFERENTIAL  
52. 331-1407 [1] SPIDER  
53. 7X-2436 M [16] BOLT (M12X1.75X100-MM)  
54. 6V-8200 M [4] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
55. 270-3849 [2] HUB GP-WHEEL  
    (EACH INCLUDES)
  243-0378 [1] NUT  
56. 5W-5682 [2] VALVE AS-PURGE (AXLE)  
57. 8T-4140 M [28] BOLT (M16X2X60-MM)  
58. 8U-6079 [2] SEAL-O-RING  
59. 375-2548 [2] GEAR-SUN  
60. 269-2430 [2] RING  
61. 121-8167 [2] BEARING-ROLLER  
62. 269-2431 [2] BEARING-ROLLER  
63. 333-8030 [2] HUB-FLANGE  
64. 7X-5762 [2] SEAL-O-RING  
65. 263-3701 [2] GEAR-CARRIER  
66. 320-9728 [4] SEAL-O-RING  
67. 320-9731 [2] SEAL-O-RING  
68. 298-2314 [2] GEAR-INTERNAL  
69. 328-8804 [2] PISTON  
70. 263-4057 [8] DOWEL  
71. 355-2319 [2] SEAL  
72. 238-3303 [2] RING (2-MM THK)  
73. 8U-0754 [2] SEAL  
74. 238-3304 [2] RING (2-MM THK)  
75. 8U-3592 [16] SPRING  
76. 238-3305 [16] SPRING  
77. 298-2315 [16] BOLT-SPECIAL  
78. 8U-3591 [16] SPACER (6.5X15X7-MM THK)  
79. 263-3704 [14] DISC-CLUTCH (4.5-MM THK)  
  238-3309 B [14] DISC-CLUTCH (2.5-MM THK)  
  238-3307 B [2] DISC-CLUTCH (2-MM THK)  
  238-3308 B [2] DISC-CLUTCH (3-MM THK)  
83. 375-1360 C [2] WASHER-THRUST (10X40.2X5.1-MM THK)  
84. 375-8264 C [2] CAGE-PINION  
85. 375-1359 [6] GEAR-PLANETARY  
87. 110-4737 [6] RING-RETAINING  
88. 6V-3668 M [4] BOLT (M12X1.75X30-MM)  
89. 243-5336 M [2] BOLT (M10X1.5X20-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56260205
 

265-9271: AXLE AR-FRONT

265-9271 AXLE AR-FRONT
S/N D2W1-UP
PART OF 250-3290 POWER TRAIN AR
i03705743 SEBP5626
2659271 AXLE AR-FRONT Parts scheme
  For full view, you need register

Parts for your M322D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-0965 [20] RING  
2. 303-9445 M [20] NUT-HEX FLANGE (M22X1.5-THD)  
3. 303-9446 [20] LOCKWASHER  
4. 5W-2817 [1] FITTING-GREASE  
5. 093-0349 [1] WASHER (22X60X6-MM THK)  
6. 139-4550 [1] EXTENSION  
7. 331-1405 CY [1] AXLE GP-STEERING (FRONT)  
8. 243-0919 [2] FITTING  
9. 248-3220 [2] PLATE AS  
10. 265-9253 [1] PIN AS  
11. 133-2424 B [1] SHIM (0.5-MM THK)  
12. 6V-6560 [2] SEAL-O-RING  
13. 6V-8398 [2] SEAL-O-RING  
14. 7X-2552 M [8] BOLT (M16X2X30-MM)  
15. 8T-4123 [1] WASHER (3.62X5.75X0.375-MM THK)  
16. 8T-5460 M [1] BOLT (M20X2.5X40-MM)  
17. 8T-7490 [2] CONNECTOR-TUBE  
18. 8T-7524 [2] SEAL-O-RING  
19. 093-0086 B [1] SHIM (1-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56260206
 

241-7438: AXLE AR-REAR

241-7438 AXLE AR-REAR
S/N D2W1-UP
PART OF 250-3290 POWER TRAIN AR
i03740122 SEBP5626
2417438 AXLE AR-REAR Parts scheme
  For full view, you need register

Parts for your M322D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-0965 [20] RING  
2. 303-9445 M [20] NUT-HEX FLANGE (M22X1.5-THD)  
3. 303-9446 [20] LOCKWASHER  
4. 8U-5923 [2] FITTING AS  
5. 331-1410 CY [1] AXLE & TRANSMISSION AR  
6. 241-6199 [1] ELBOW AS  
  6V-8398 [1] SEAL-O-RING  
  8T-6850 [1] SEAL-O-RING  
  227-0061 [1] ELBOW  
7. 6V-6560 [2] SEAL-O-RING  
8. 6V-7676 M [8] NUT (M24X3-THD)  
9. 6V-8398 [3] SEAL-O-RING  
10. 8T-4167 [16] WASHER-HARD (26X44X4-MM THK)  
11. 9X-8477 M [8] BOLT (M24X3X280-MM)  
12. 8T-6850 [1] SEAL-O-RING  
13. 8T-7488 [1] CONNECTOR  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56260207
 

331-1405: AXLE GP-STEERING

331-1405 AXLE GP-STEERING
S/N D2W1-305
PART OF 265-9271 AXLE AR-FRONT
i05067571 SEBP5626
3311405 AXLE GP-STEERING Parts scheme 3311405 AXLE GP-STEERING Parts scheme
  For full view, you need register

Parts for your M322D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 372-4118 [1] GEAR-CROWN  
2. 269-2406 [1] PINION  
3. 110-0124 B [1] SHIM (2-MM THK)  
  110-0122 B [1] SHIM (1.8-MM THK)  
  110-0121 B [1] SHIM (1.5-MM THK)  
  110-0120 B [1] SHIM (1.2-MM THK)  
  129-9912 B [1] SHIM (1.9-MM THK)  
  129-9913 B [1] SHIM (1.7-MM THK)  
  129-9914 B [1] SHIM (1.6-MM THK)  
  129-9915 B [1] SHIM (1.4-MM THK)  
  129-9916 B [1] SHIM (1.3-MM THK)  
  190-8567 B [1] SHIM (1-MM THK)  
  190-8566 B [1] SHIM (0.9-MM THK)  
  190-8565 B [1] SHIM (0.8-MM THK)  
  190-8563 B [1] SHIM (0.7-MM THK)  
  190-8561 B [1] SHIM (0.6-MM THK)  
  5W-2074 B [1] SHIM (0.5-MM THK)  
  5W-2073 B [1] SHIM (0.3-MM THK)  
  5W-3644 B [1] SHIM (0.2-MM THK)  
  5W-2072 B [1] SHIM (0.1-MM THK)  
  193-1123 B [1] SHIM (0.75-MM THK)  
  193-1124 B [1] SHIM (0.65-MM THK)  
  331-1378 B [1] SHIM (1.25-MM THK)  
  331-1379 B [1] SHIM (1.35-MM THK)  
  331-1381 B [1] SHIM (1.45-MM THK)  
  331-1382 B [1] SHIM (1.55-MM THK)  
  331-1383 B [1] SHIM (1.65-MM THK)  
  331-1384 B [1] SHIM (1.75-MM THK)  
  331-1386 B [1] SHIM (1.85-MM THK)  
31. 110-0158 B [1] RING (16-MM THK)  
  110-0157 B [1] RING (16.1-MM THK)  
  110-0156 B [1] RING (16.2-MM THK)  
  110-0155 B [1] RING (16.3-MM THK)  
  110-0154 B [1] RING (16.4-MM THK)  
  110-0153 B [1] RING (16.5-MM THK)  
  110-0152 B [1] RING (16.6-MM THK)  
  110-0151 B [1] RING (16.7-MM THK)  
  110-0150 B [1] RING (16.8-MM THK)  
  110-0146 B [1] RING (16.92-MM THK)  
  110-0140 B [1] RING (17.1-MM THK)  
  110-0139 B [1] RING (17.2-MM THK)  
  110-0138 B [1] RING (17.3-MM THK)  
  110-0137 B [1] RING (17.4-MM THK)  
  110-0148 B [1] RING (16.86-MM THK)  
  110-0144 B [1] RING (16.98-MM THK)  
  110-0142 B [1] RING (17.04-MM THK)  
  202-9635 B [1] RING (16.56-MM THK)  
  202-9636 B [1] RING (16.62-MM THK)  
  202-9637 B [1] RING (16.64-MM THK)  
  202-9643 B [1] RING (16.68-MM THK)  
  202-9644 B [1] RING (16.72-MM THK)  
  202-9669 B [1] RING (16.74-MM THK)  
  202-9670 B [1] RING (16.76-MM THK)  
  202-9671 B [1] RING (16.78-MM THK)  
  202-9672 B [1] RING (16.82-MM THK)  
  202-9673 B [1] RING (16.84-MM THK)  
  202-9679 B [1] RING (16.88-MM THK)  
  202-9680 B [1] RING (16.9-MM THK)  
  202-9681 B [1] RING (16.94-MM THK)  
  193-1454 B [1] RING (16.66-MM THK)  
  193-1455 B [1] RING (16.96-MM THK)  
  193-1458 B [1] RING (17-MM THK)  
  193-1460 B [1] RING (17.02-MM THK)  
  193-1461 B [1] RING (17.06-MM THK)  
  193-1462 B [1] RING (17.08-MM THK)  
  193-1463 B [1] RING (17.12-MM THK)  
  193-1464 B [1] RING (17.14-MM THK)  
  193-1465 B [1] RING (17.16-MM THK)  
  193-1466 B [1] RING (17.18-MM THK)  
  193-1467 B [1] RING (17.22-MM THK)  
  193-1469 B [1] RING (17.24-MM THK)  
  193-1470 B [1] RING (17.26-MM THK)  
  193-1471 B [1] RING (17.28-MM THK)  
75. 269-2407 [1] BEARING-ROLLER  
76. 269-2408 [1] SEAL-RING  
77. 8U-2506 [1] WASHER (30.5X55.5X6-MM THK)  
78. 110-0848 M [1] NUT (M30X1.5-THD)  
79. 331-1387 [1] FLANGE-DRIVE  
80. 331-1388 [1] PLATE-DEFLECTOR  
81. 331-1401 [2] WASHER-THRUST  
82. 366-0492 [2] GEAR-DIFFERENTIAL  
83. 366-0493 [4] GEAR-DIFFERENTIAL  
84. 331-1404 [4] WASHER-THRUST  
85. 333-8013 [1] CASE-DIFFERENTIAL  
86. 331-1407 [1] SPIDER  
87. 7X-2436 M [16] BOLT (M12X1.75X100-MM)  
88. 6V-8200 M [4] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
89. 110-0181 B [2] RING (2-MM THK)  
  110-0182 B [2] RING (1.95-MM THK)  
  110-0183 B [2] RING (1.9-MM THK)  
  110-0184 B [2] RING (1.85-MM THK)  
  098-2962 B [2] SHIM (1.8-MM THK)  
  098-2960 B [2] SHIM (1.6-MM THK)  
  098-2959 B [2] SHIM (1.5-MM THK)  
  098-2958 B [2] SHIM (1.4-MM THK)  
  098-2957 B [2] SHIM (1.3-MM THK)  
  110-0191 B [2] RING (1.25-MM THK)  
  6T-8668 B [2] SHIM (1.2-MM THK)  
  110-0192 B [2] RING (1.15-MM THK)  
  6T-8669 B [2] SHIM (1.1-MM THK)  
  110-0193 B [2] RING (1.05-MM THK)  
  6T-8670 B [2] SHIM (1-MM THK)  
  110-0194 B [2] RING (0.95-MM THK)  
  110-0195 B [2] RING (0.9-MM THK)  
  110-0167 B [2] WASHER (90X99.8X0.85-MM THK)  
  6T-8671 B [2] SHIM (0.8-MM THK)  
  110-0168 B [2] WASHER (90X99.8X0.75-MM THK)  
  6T-8672 B [2] SHIM (0.7-MM THK)  
  110-0169 B [2] WASHER (90X99.8X0.65-MM THK)  
  6T-8673 B [2] SHIM (0.6-MM THK)  
  6T-8674 B [2] SHIM (0.5-MM THK)  
  110-0177 B [2] WASHER (90X99.8X0.45-MM THK)  
  6T-8675 B [2] SHIM (0.4-MM THK)  
  110-0178 B [2] WASHER (90X99.8X0.35-MM THK)  
  110-0180 B [2] WASHER (90X99.8X0.3-MM THK)  
  193-1125 B [2] SHIM (0.1-MM THK)  
  193-1127 B [2] SHIM (0.15-MM THK)  
119. 8U-2306 [1] BEARING  
120. 110-2463 [1] BEARING-ROLLER  
121. 270-4969 [2] SEAL-O-RING  
122. 336-7380 M [36] BOLT (M18X2.5X65-MM)  
124. 263-3629 [3] PLUG AS  
    (EACH INCLUDES)
  203-0215 [1] SEAL-O-RING  
125. 203-0215 [1] SEAL-O-RING  
126. 263-3630 [1] PLUG AS-MAGNET (AXLE)  
128. 333-8003 [2] HOUSING-AXLE  
129. 333-8004 [1] HOUSING  
130. 220-2593 [4] BUSHING-SLEEVE  
131. 333-8005 [4] SEAL-RING  
132. 173-8253 [2] SLEEVE  
133. 372-3535 Y [2] UNIVERSAL JOINT GP  
134. 269-2415 Y [1] TIE ROD GP (LH)  
135. 269-2416 Y [1] TIE ROD GP (RH)  
136. 271-5030 M [2] LOCKNUT (M30X1.5-THD)  
137. 333-8018 [1] HOUSING GP-AXLE (LH)  
138. 333-8019 [1] HOUSING GP-AXLE (RH)  
    (EACH HOUSING GP INCLUDES)
  243-0378 [1] NUT  
139. 333-8048 [5] BEARING-TAPERED ROLLER  
140. 5W-1833 [4] CAP  
141. 5W-1855 [4] SEAL-O-RING  
142. 333-8025 [2] TRUNNION  
143. 5W-2998 [4] FITTING-GREASE  
144. 135-3437 [4] SEAL-O-RING  
145. 8T-6430 M [16] BOLT (M20X2.5X50-MM)  
146. 333-8026 [2] TRUNNION  
148. 243-0917 [2] WASHER-THRUST  
149. 243-0918 [2] WASHER-THRUST  
150. 110-0846 [2] RING-RETAINING  
151. 5W-5682 [2] VALVE AS-PURGE (AXLE)  
152. 8U-2354 B [2] SHIM (6-MM THK)  
  5W-6405 B [2] SHIM (6.5-MM THK)  
  5W-7644 B [2] SHIM (4-MM THK)  
  5W-7642 B [2] SHIM (5-MM THK)  
  5W-7641 B [2] SHIM (5.5-MM THK)  
  5W-7643 B [2] SHIM (4.5-MM THK)  
  128-1733 B [2] SHIM (2-MM THK)  
  128-1734 B [2] SHIM (3-MM THK)  
  5W-6408 B [2] WASHER (18.5X35X8-MM THK)  
  202-8145 B [2] WASHER (18.5X35X9-MM THK)  
  202-8149 B [2] WASHER (18.5X35X14-MM THK)  
163. 5W-2173 M [4] BOLT (M18X2.5X40-MM)  
164. 241-8122 M [2] NUT (M18X2.5-THD)  
165. 375-1286 CY [1] CYLINDER GP-HYDRAULIC  
166. 6V-3823 M [6] BOLT (M12X1.75X60-MM)  
167. 269-2430 [2] RING  
168. 121-8167 [2] BEARING-ROLLER  
169. 269-2431 [2] BEARING-ROLLER  
170. 333-8030 [2] HUB-FLANGE  
171. 7X-5762 [2] SEAL-O-RING  
172. 263-3701 [2] GEAR-CARRIER  
173. 320-9728 [4] SEAL-O-RING  
174. 320-9731 [2] SEAL-O-RING  
175. 298-2314 [2] GEAR-INTERNAL  
176. 328-8804 [2] PISTON  
177. 263-4057 [8] DOWEL  
178. 355-2319 [2] SEAL  
179. 238-3303 [2] RING (2-MM THK)  
180. 8U-0754 [2] SEAL  
181. 238-3304 [2] RING (2-MM THK)  
182. 8U-3592 [16] SPRING  
183. 238-3305 [16] SPRING  
184. 298-2315 [16] BOLT-SPECIAL  
185. 8U-3591 [16] SPACER (6.5X15X7-MM THK)  
186. 263-3704 [14] DISC-CLUTCH (4.5-MM THK)  
187. 238-3309 B [14] DISC-CLUTCH (2.5-MM THK)  
188. 238-3307 B [2] DISC-CLUTCH (2-MM THK)  
  238-3308 B [2] DISC-CLUTCH (3-MM THK)  
190. 375-1360 [2] WASHER-THRUST (10X40.2X5.1-MM THK)  
191. 375-8264 [2] CAGE-PINION  
192. 375-1359 [6] GEAR-PLANETARY  
194. 110-4737 [6] RING-RETAINING  
195. 6V-3668 M [4] BOLT (M12X1.75X30-MM)  
196. 243-5336 M [2] BOLT (M10X1.5X20-MM)  
197. 333-8037 [20] STUD-WHEEL  
198. 366-0494 [2] RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56260208
 

331-1405: AXLE GP-STEERING

331-1405 AXLE GP-STEERING
S/N D2W306-UP
PART OF 265-9271 AXLE AR-FRONT
i05067630 SEBP5626
3311405 AXLE GP-STEERING Parts scheme 3311405 AXLE GP-STEERING Parts scheme
  For full view, you need register

Parts for your M322D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 372-4118 [1] GEAR-CROWN  
2. 372-4121 [1] PINION  
3. 110-0124 B [1] SHIM (2-MM THK)  
  110-0122 B [1] SHIM (1.8-MM THK)  
  110-0121 B [1] SHIM (1.5-MM THK)  
  110-0120 B [1] SHIM (1.2-MM THK)  
  129-9912 B [1] SHIM (1.9-MM THK)  
  129-9913 B [1] SHIM (1.7-MM THK)  
  129-9914 B [1] SHIM (1.6-MM THK)  
  129-9915 B [1] SHIM (1.4-MM THK)  
  129-9916 B [1] SHIM (1.3-MM THK)  
  190-8567 B [1] SHIM (1-MM THK)  
  190-8566 B [1] SHIM (0.9-MM THK)  
  190-8565 B [1] SHIM (0.8-MM THK)  
  190-8563 B [1] SHIM (0.7-MM THK)  
  190-8561 B [1] SHIM (0.6-MM THK)  
  5W-2074 B [1] SHIM (0.5-MM THK)  
  5W-2073 B [1] SHIM (0.3-MM THK)  
  5W-3644 B [1] SHIM (0.2-MM THK)  
  5W-2072 B [1] SHIM (0.1-MM THK)  
  193-1123 B [1] SHIM (0.75-MM THK)  
  193-1124 B [1] SHIM (0.65-MM THK)  
  331-1378 B [1] SHIM (1.25-MM THK)  
  331-1379 B [1] SHIM (1.35-MM THK)  
  331-1381 B [1] SHIM (1.45-MM THK)  
  331-1382 B [1] SHIM (1.55-MM THK)  
  331-1383 B [1] SHIM (1.65-MM THK)  
  331-1384 B [1] SHIM (1.75-MM THK)  
  331-1386 B [1] SHIM (1.85-MM THK)  
31. 110-0158 B [1] RING (16-MM THK)  
  490-0441 B [1] RING (16.1-MM THK)  
  110-0156 B [1] RING (16.2-MM THK)  
  110-0155 B [1] RING (16.3-MM THK)  
  110-0154 B [1] RING (16.4-MM THK)  
  110-0153 B [1] RING (16.5-MM THK)  
  110-0152 B [1] RING (16.6-MM THK)  
  110-0151 B [1] RING (16.7-MM THK)  
  490-0458 B [1] RING (16.8-MM THK)  
  110-0146 B [1] RING (16.92-MM THK)  
  110-0139 B [1] RING (17.2-MM THK)  
  490-7393 B [1] RING (17.3-MM THK)  
  490-7394 B [1] RING (17.4-MM THK)  
  420-6082 B [1] RING (16.9-MM THK)  
  110-0144 B [1] RING (16.98-MM THK)  
  437-1494 B [1] RING (17.04-MM THK)  
  202-9635 B [1] RING (16.56-MM THK)  
  202-9636 B [1] RING (16.62-MM THK)  
  202-9637 B [1] RING (16.64-MM THK)  
  202-9643 B [1] RING (16.68-MM THK)  
  202-9644 B [1] RING (16.72-MM THK)  
  202-9669 B [1] RING (16.74-MM THK)  
  202-9670 B [1] RING (16.76-MM THK)  
  202-9671 B [1] RING (16.78-MM THK)  
  202-9672 B [1] RING (16.82-MM THK)  
  202-9673 B [1] RING (16.84-MM THK)  
  202-9679 B [1] RING (16.88-MM THK)  
  202-9680 B [2] RING (16.9-MM THK)  
  202-9681 B [1] RING (16.94-MM THK)  
  193-1454 B [1] RING (16.66-MM THK)  
  490-7374 B [1] RING (16.96-MM THK)  
  490-0443 B [1] RING (16.3-MM THK)  
  193-1460 B [1] RING (17.02-MM THK)  
  473-6651 B [1] RING (17.06-MM THK)  
  193-1462 B [1] RING (17.08-MM THK)  
  193-1463 B [1] RING (17.12-MM THK)  
  193-1464 B [1] RING (17.14-MM THK)  
  193-1465 B [1] RING (17.16-MM THK)  
  193-1466 B [1] RING (17.18-MM THK)  
  193-1467 B [1] RING (17.22-MM THK)  
  193-1469 B [1] RING (17.24-MM THK)  
  193-1470 B [1] RING (17.26-MM THK)  
  193-1471 B [1] RING (17.28-MM THK)  
75. 269-2407 [1] BEARING-ROLLER  
76. 418-8616 [1] SEAL-LIP TYPE  
77. 8U-2506 [1] WASHER (30.5X55.5X6-MM THK)  
78. 110-0848 M [1] NUT (M30X1.5-THD)  
79. 417-6660 [1] FLANGE-DRIVE  
80. 331-1388 [1] PLATE-DEFLECTOR  
81. 331-1401 [2] WASHER-THRUST  
82. 366-0492 [2] GEAR-DIFFERENTIAL  
83. 366-0493 [4] GEAR-DIFFERENTIAL  
84. 331-1404 [4] WASHER-THRUST  
85. 333-8013 [1] CASE-DIFFERENTIAL  
86. 331-1407 [1] SPIDER  
87. 7X-2436 M [16] BOLT (M12X1.75X100-MM)  
88. 6V-8200 M [4] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
89. 110-0181 B [2] RING (2-MM THK)  
  110-0182 B [2] RING (1.95-MM THK)  
  110-0183 B [2] RING (1.9-MM THK)  
  110-0184 B [2] RING (1.85-MM THK)  
  098-2962 B [2] SHIM (1.8-MM THK)  
  098-2960 B [2] SHIM (1.6-MM THK)  
  098-2959 B [2] SHIM (1.5-MM THK)  
  098-2958 B [2] SHIM (1.4-MM THK)  
  098-2957 B [2] SHIM (1.3-MM THK)  
  110-0191 B [2] RING (1.25-MM THK)  
  6T-8668 B [2] SHIM (1.2-MM THK)  
  110-0192 B [2] RING (1.15-MM THK)  
  6T-8669 B [2] SHIM (1.1-MM THK)  
  110-0193 B [2] RING (1.05-MM THK)  
  6T-8670 B [2] SHIM (1-MM THK)  
  110-0194 B [2] RING (0.95-MM THK)  
  110-0195 B [2] RING (0.9-MM THK)  
  110-0167 B [2] WASHER (90X99.8X0.85-MM THK)  
  6T-8671 B [2] SHIM (0.8-MM THK)  
  110-0168 B [2] WASHER (90X99.8X0.75-MM THK)  
  6T-8672 B [2] SHIM (0.7-MM THK)  
  110-0169 B [2] WASHER (90X99.8X0.65-MM THK)  
  6T-8673 B [2] SHIM (0.6-MM THK)  
  6T-8674 B [2] SHIM (0.5-MM THK)  
  110-0177 B [2] WASHER (90X99.8X0.45-MM THK)  
  6T-8675 B [2] SHIM (0.4-MM THK)  
  110-0178 B [2] WASHER (90X99.8X0.35-MM THK)  
  110-0180 B [2] WASHER (90X99.8X0.3-MM THK)  
  193-1125 B [2] SHIM (0.1-MM THK)  
  193-1127 B [2] SHIM (0.15-MM THK)  
119. 8U-2306 [1] BEARING  
120. 110-2463 [1] BEARING-ROLLER  
121. 270-4969 [2] SEAL-O-RING  
122. 336-7380 M [36] BOLT (M18X2.5X65-MM)  
124. 263-3629 [3] PLUG AS  
    (EACH INCLUDES)
  203-0215 [1] SEAL-O-RING  
125. 203-0215 [1] SEAL-O-RING  
126. 263-3630 [1] PLUG AS-MAGNET (AXLE)  
128. 333-8003 [2] HOUSING-AXLE  
129. 333-8004 [1] HOUSING  
130. 220-2593 [4] BUSHING-SLEEVE  
131. 333-8005 [4] SEAL-RING  
132. 173-8253 [2] SLEEVE  
133. 372-3535 Y [2] UNIVERSAL JOINT GP  
134. 340-5790 CY [1] TIE ROD GP (LH)  
135. 340-5791 CY [1] TIE ROD GP (RH)  
136. 271-5030 M [2] LOCKNUT (M30X1.5-THD)  
137. 333-8018 [1] HOUSING GP-AXLE (LH)  
138. 333-8019 [1] HOUSING GP-AXLE (RH)  
    (EACH HOUSING GP INCLUDES)
  243-0378 [1] NUT  
139. 333-8048 [5] BEARING-TAPERED ROLLER  
140. 5W-1833 [4] CAP  
141. 5W-1855 [4] SEAL-O-RING  
142. 333-8025 [2] TRUNNION  
143. 5W-2998 [4] FITTING-GREASE  
144. 135-3437 [4] SEAL-O-RING  
145. 8T-6430 M [16] BOLT (M20X2.5X50-MM)  
146. 333-8026 [2] TRUNNION  
148. 243-0917 [2] WASHER-THRUST  
149. 243-0918 [2] WASHER-THRUST  
150. 110-0846 [2] RING-RETAINING  
151. 5W-5682 [2] VALVE AS-PURGE (AXLE)  
152. 8U-2354 B [2] SHIM (6-MM THK)  
  5W-6405 B [2] SHIM (6.5-MM THK)  
  5W-7644 B [2] SHIM (4-MM THK)  
  5W-7642 B [2] SHIM (5-MM THK)  
  5W-7641 B [2] SHIM (5.5-MM THK)  
  5W-7643 B [2] SHIM (4.5-MM THK)  
  128-1733 B [2] SHIM (2-MM THK)  
  128-1734 B [2] SHIM (3-MM THK)  
  5W-6408 B [2] WASHER (18.5X35X8-MM THK)  
  202-8145 B [2] WASHER (18.5X35X9-MM THK)  
  202-8149 B [2] WASHER (18.5X35X14-MM THK)  
163. 5W-2173 M [4] BOLT (M18X2.5X40-MM)  
164. 241-8122 M [2] NUT (M18X2.5-THD)  
165. 375-1286 Y [1] CYLINDER GP-HYDRAULIC  
166. 6V-3823 M [6] BOLT (M12X1.75X60-MM)  
167. 269-2430 [2] RING  
168. 121-8167 [2] BEARING-ROLLER  
169. 269-2431 [2] BEARING-ROLLER  
170. 333-8030 [2] HUB-FLANGE  
171. 7X-5762 [2] SEAL-O-RING  
172. 263-3701 [2] GEAR-CARRIER  
173. 320-9728 [4] SEAL-O-RING  
174. 320-9731 [2] SEAL-O-RING  
175. 298-2314 [2] GEAR-INTERNAL  
176. 328-8804 [2] PISTON  
177. 263-4057 [8] DOWEL  
178. 355-2319 [2] SEAL  
179. 238-3303 [2] RING (2-MM THK)  
180. 8U-0754 [2] SEAL  
181. 238-3304 [2] RING (2-MM THK)  
182. 8U-3592 [16] SPRING  
183. 238-3305 [16] SPRING  
184. 298-2315 [16] BOLT-SPECIAL  
185. 8U-3591 [16] SPACER (6.5X15X7-MM THK)  
186. 263-3704 [14] DISC-CLUTCH (4.5-MM THK)  
187. 238-3309 B [14] DISC-CLUTCH (2.5-MM THK)  
188. 238-3307 B [2] DISC-CLUTCH (2-MM THK)  
  238-3308 B [2] DISC-CLUTCH (3-MM THK)  
190. 375-1360 [2] WASHER-THRUST (10X40.2X5.1-MM THK)  
191. 375-8264 [2] CAGE-PINION  
192. 375-1359 [6] GEAR-PLANETARY  
194. 110-4737 [6] RING-RETAINING  
195. 6V-3668 M [4] BOLT (M12X1.75X30-MM)  
196. 243-5336 M [2] BOLT (M10X1.5X20-MM)  
197. 333-8037 [20] STUD-WHEEL  
198. 366-0494 [2] RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56260209
 

275-4912: COUPLING GP-FLEXIBLE

275-4912 COUPLING GP-FLEXIBLE
S/N D2W1-UP
PART OF 354-7270 INSTALLATION AR
i02559761 SEBP5626
2754912 COUPLING GP-FLEXIBLE Parts scheme
  For full view, you need register

Parts for your M322D WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 134-9680 Y [1] COUPLING GP-PUMP  
2. 7X-3174 [8] BOLT (3/8-24X1.375-IN)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
C6.6 Engines for Caterpillar Built Machines

Caterpillar Parts SIS Catalog M322D :

WIRING GP-RIDE CONTROL
337-5792 WIRING GP-RIDE CONTROL
WIRING GP-MONITOR
337-5814 WIRING GP-MONITOR
WIRING GP-MIRROR
337-5800 WIRING GP-MIRROR
WIRING GP-MIRROR
273-4821 WIRING GP-MIRROR
WIRING GP-MACHINE
337-5803 WIRING GP-MACHINE
WIRING GP-FAN
314-2880 WIRING GP-FAN
WIRING GP-FAN
314-2878 WIRING GP-FAN
WIRING GP-FAN
297-1603 WIRING GP-FAN
WIRING GP-STABILIZER
364-2785 WIRING GP-STABILIZER
WIRING GP-UNDERCARRIAGE/SWIVEL
242-5028 WIRING GP-UNDERCARRIAGE/SWIVEL
WIRING GP-WORK TOOL
337-5784 WIRING GP-WORK TOOL
AXLE & TRANSMISSION AR
331-1410 AXLE & TRANSMISSION AR
AXLE AR-FRONT
265-9271 AXLE AR-FRONT
AXLE AR-REAR
241-7438 AXLE AR-REAR
AXLE GP-STEERING
331-1405 AXLE GP-STEERING
AXLE GP-STEERING
331-1405 AXLE GP-STEERING
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.