ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP56300200
329-1276: WIRING GP-HYDRAULIC GENERATOR
329-1276 WIRING GP-HYDRAULIC GENERATOR
S/N D3X1-UP
15-KW
PART OF 358-9322 GENERATOR AR-HYDRAULIC
S/N D3X1-UP
15-KW
PART OF 358-9322 GENERATOR AR-HYDRAULIC
For full view, you need register
Parts for your M322D MH WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 118-8985 | [1] | NUT-CLAMP | |
| 2. | 206-2423 | [42] | SADDLE-MOUNTING | |
| 3. | 329-1272 | [1] | CABLE GP-ELECTRICAL | |
| 336-0679 | [1] | CONNECTOR GP-ELECTRICAL | ||
| 329-1283 | [1] | GLAND-CABLE | ||
| 344-1584 | [1] | COVER-PROTECTION | ||
| 344-1585 | [1] | INSERT-CONNECTOR | ||
| 4. | 329-1277 | [1] | CABLE AS | |
| 128-4170 | [2] | TERMINAL AS | ||
| (EACH INCLUDES) | ||||
| 6H-3587 | [1] | TERMINAL-RING (6-GA TO 8-GA, 3/8-IN SCREW) | ||
| 6V-9023 E | TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM) | |||
| 6H-3587 | [1] | TERMINAL-RING (6-GA TO 8-GA, 3/8-IN SCREW) | ||
| 6V-9023 E | TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM) | |||
| 336-0678 | [1] | CONNECTOR GP-ELECTRICAL | ||
| 329-1283 | [1] | GLAND-CABLE | ||
| 340-8294 | [1] | COVER-CONNECTOR | ||
| 340-8295 | [1] | INSERT-FEMALE | ||
| 5. | 337-5777 | [1] | PLATE | |
| 6. | 204-2281 | [1] | STRAP-CABLE | |
| 7. | 293-9452 | [1] | MOUNTING-CABLE TIE | |
| 8. | 5P-7464 | [2] | CLIP (SLOT) | |
| 9. | 5P-7465 | [2] | CLIP (TAB) | |
| 10. | 6V-1249 | [2] | GROMMET (22-MM ID) | |
| 11. | 7K-1181 | [87] | STRAP-CABLE | |
| 12. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 13. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 8T-4244 M | [2] | NUT (M12X1.75-THD) | |
| 15. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 16. | 9X-8256 | [1] | WASHER (6.6X12X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP56300201
337-5827: WIRING GP-HYDRAULIC GENERATOR
337-5827 WIRING GP-HYDRAULIC GENERATOR -SLOPE & GRADE
S/N D3X1-UP
12.5-KW
PART OF 358-9321 GENERATOR AR-HYDRAULIC
S/N D3X1-UP
12.5-KW
PART OF 358-9321 GENERATOR AR-HYDRAULIC
For full view, you need register
Parts for your M322D MH WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 241-0157 | [2] | FILM-WARNING (ELECTROCUTION HAZARD, READ OMM) | |
| 2. | 241-0158 | [2] | FILM-WARNING (SHOCK, ELECTROCUTION HAZARD) | |
| 3. | 287-6880 | [1] | BRACKET AS | |
| 4. | 289-9758 Y | [1] | BOX GP-JUNCTION (GENERATOR) | |
| 5. | 337-5828 | [1] | HARNESS AS-BOX (GENERATOR CHASSIS) | |
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [8] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [6] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 230-4014 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 230-5011 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 8T-8730 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0844 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 2L-8078 | [1] | TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW) | ||
| 6. | 105-3482 M | [4] | BOLT-SOCKET HEAD (M8X1.25X16-MM) | |
| 7. | 3S-2093 B | [23] | STRAP-CABLE | |
| 8. | 4P-7581 | [1] | CLIP (LADDER) | |
| 9. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4133 M | [3] | NUT (M10X1.5-THD) | |
| 11. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 12. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 13. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 14. | 8T-3425 D | CHANNEL-TRIM (0.1-M) | ||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56300202
344-7072: WIRING GP-HYDRAULIC GENERATOR
344-7072 WIRING GP-HYDRAULIC GENERATOR
S/N D3X1-UP
15-KW
PART OF 329-1268 GENERATOR MTG & CONTROL GP
S/N D3X1-UP
15-KW
PART OF 329-1268 GENERATOR MTG & CONTROL GP
For full view, you need register
Parts for your M322D MH WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-4890 | [1] | NUT-SPECIAL (1/2-14-THD) | |
| 2. | 6Y-6815 | [1] | GASKET AS (CONNECTOR) | |
| 3. | 8W-4756 | [1] | BUSHING-TERMINAL | |
| 4. | 135-2543 | [1] | BOOT (RED) | |
| 5. | 144-4361 Y | [1] | GENERATOR GP-HYDRAULIC | |
| 6. | 329-1275 | [1] | HARNESS AS-PANEL | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 340-8298 | [1] | TERMINAL-BLADE | ||
| 340-8299 | [1] | TERMINAL-BLADE | ||
| 340-8300 | [1] | TERMINAL-BLADE | ||
| 340-8301 | [1] | TERMINAL-BLADE | ||
| 7. | 338-2369 | [1] | BRACKET AS | |
| 6V-9632 M | [6] | NUT-WELD (M6X1-THD) | ||
| 8. | 338-2370 | [3] | BLOCK AS | |
| (EACH INCLUDES) | ||||
| 4B-4276 | [2] | WASHER (7X16X1.6-MM THK) | ||
| 5C-2890 M | [1] | NUT (M6X1-THD) | ||
| 6V-7357 M | [1] | BOLT (M6X1X25-MM) | ||
| 9. | 340-8298 | [1] | TERMINAL-BLADE | |
| 10. | 340-8299 | [1] | TERMINAL-BLADE | |
| 11. | 340-8300 | [1] | TERMINAL-BLADE | |
| 12. | 340-8301 | [1] | TERMINAL-BLADE | |
| 13. | 129-3178 M | [3] | LOCKNUT (M6X1-THD) | |
| 14. | 5C-9553 M | [6] | BOLT (M6X1X16-MM) | |
| 15. | 9X-8256 | [9] | WASHER (6.6X12X2-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56300203
337-5803: WIRING GP-MACHINE
For full view, you need register
Parts for your M322D MH WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-0718 Y | [1] | SWITCH GP-DISCONNECT (BATTERY) | |
| 2. | 8U-2738 | [2] | CAP-PROTECTION | |
| 3. | 118-3534 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(START RELAY) | |
| 4. | 123-8838 | [1] | HOLDER AS-FUSE | |
| 5. | 134-3355 | [1] | STRAP AS | |
| 6. | 232-6315 | [1] | FUSE (80-AMPERE) | |
| 7. | 241-8368 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(GLOW PLUG) | |
| 8. | 256-6393 | [1] | BRACKET | |
| 9. | 261-4704 | [1] | CABLE AS | |
| 159-8050 E | CABLE (00-GA, BLACK)(26-CM) | |||
| [1] | TERMINAL AS | |||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 6V-2722 D | TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M) | |||
| [1] | TERMINAL AS | |||
| 030-1705 | [1] | TERMINAL-CABLE (00-GA, 5/16-IN SCREW) | ||
| 6V-2722 D | TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M) | |||
| 10. | 271-5306 | [1] | CABLE AS-BATTERY (NEGATIVE) | |
| [1] | TERMINAL AS | |||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 6V-2722 D | TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M) | |||
| 7N-5274 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 9G-8909 | [1] | COVER-TERMINAL (BLACK) | ||
| 3S-6050 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(48-CM) | |||
| 11. | 273-3623 | [1] | STRAP AS-GROUND | |
| 12. | 328-0132 | [1] | CABLE AS (JUMPER) | |
| 9G-0002 | [1] | COVER AS-TERMINAL (RED) | ||
| 9G-0005 | [1] | COVER AS-TERMINAL (BLACK) | ||
| (EACH COVER AS INCLUDES) | ||||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| 159-8049 E | CABLE (00-GA, RED)(31-CM) | |||
| 8C-5918 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 8T-9756 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| (EACH TERMINAL AS INCLUDES) | ||||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 13. | 337-5804 | [1] | HARNESS AS-ENGINE (ECM) | |
| 207-1219 | [1] | FUSE (20-AMPERE) | ||
| 232-6314 | [2] | FUSE (60-AMPERE) | ||
| 232-6315 | [2] | FUSE (80-AMPERE) | ||
| 123-8838 | [5] | HOLDER AS-FUSE | ||
| 150-5311 | [1] | LOCKWASHER | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 121-2970 | [1] | TERMINAL-BATTERY (POSITIVE) | ||
| 131-1489 | [1] | TERMINAL AS-RING (6-GA TO 8-GA) | ||
| 6H-3592 | [1] | TERMINAL-RING (6-GA TO 8-GA, 5/16-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM) | |||
| 152-5545 | [1] | TERMINAL AS | ||
| 149-8020 | [1] | TERMINAL-RING (6-GA TO 8-GA, NO. 10 SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM) | |||
| 201-4021 | [4] | TERMINAL AS (8-GA) | ||
| 201-4022 | [3] | TERMINAL AS (6-GA) | ||
| 364-2790 | [1] | TERMINAL AS (10-GA) | ||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 1S-7252 | [1] | TERMINAL-CABLE (00-GA, 3/8-IN SCREW) | ||
| 9G-4344 | [2] | TERMINAL-RING (4-GA, 1/2-IN SCREW) | ||
| 9G-4336 | [1] | TERMINAL-RING (4-GA, 3/8-IN SCREW) | ||
| 115-1185 | [3] | RING-TERMINAL | ||
| 14. | 124-7346 | [2] | LOCKWASHER | |
| 15. | 159-7463 M | [1] | BOLT (M10X1.5X240-MM) | |
| 16. | 177-0358 M | [6] | BOLT-SOCKET HEAD (M4X0.7X55-MM) | |
| 17. | 1H-3244 | [1] | LOCKWASHER | |
| 18. | 204-2281 | [4] | STRAP-CABLE | |
| 19. | 293-9452 | [4] | MOUNTING-CABLE TIE | |
| 20. | 3F-9556 | [2] | LOCKWASHER | |
| 21. | 3S-2093 B | [2] | STRAP-CABLE | |
| 22. | 4P-8134 | [1] | CLIP (LADDER) | |
| 23. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 24. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 25. | 5C-9553 M | [3] | BOLT (M6X1X16-MM) | |
| 26. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 27. | 5P-6264 | [1] | GROMMET | |
| 28. | 6P-6591 | [1] | GROMMET | |
| 29. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 30. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 31. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 32. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 33. | 8T-4190 M | [1] | BOLT (M16X2X25-MM) | |
| 34. | 8T-4226 | [1] | WASHER-PLATED (10.5X45X3-MM THK) | |
| 35. | 8T-4970 M | [4] | BOLT (M6X1X14-MM) | |
| 36. | 9X-8256 | [8] | WASHER (6.6X12X2-MM THK) | |
| 37. | 9X-8257 | [1] | WASHER (17.5X30X3.5-MM THK) | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56300204
273-4821: WIRING GP-MIRROR
273-4821 WIRING GP-MIRROR -HEATED, INCLUDES ADAPTER
S/N D3X1-UP
PART OF 333-0123 MIRROR GP, 333-0121 MIRROR GP-REAR VIEW
S/N D3X1-UP
PART OF 333-0123 MIRROR GP, 333-0121 MIRROR GP-REAR VIEW
For full view, you need register
#SEBP56300205
337-5800: WIRING GP-MIRROR
337-5800 WIRING GP-MIRROR -EXTERIOR, HEATED
S/N D3X1-UP
PART OF 333-0123 MIRROR GP, 333-0121 MIRROR GP-REAR VIEW
S/N D3X1-UP
PART OF 333-0123 MIRROR GP, 333-0121 MIRROR GP-REAR VIEW
For full view, you need register
Parts for your M322D MH WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7Y-3966 | [1] | TERMINAL AS | |
| 7Y-3962 | [1] | TERMINAL-BULLET (MALE) | ||
| 7Y-3964 | [1] | TUBE (CONNECTOR TERMINAL) | ||
| 2. | 7Y-3967 | [1] | TERMINAL AS | |
| 7Y-3963 | [1] | TERMINAL-BULLET (FEMALE) | ||
| 7Y-3965 | [1] | TUBE (RECEPTACLE TERMINAL) | ||
| 3. | 252-6699 | [1] | SWITCH AS-ROCKER (HEATED MIRROR) | |
| 111-7899 | [1] | GASKET | ||
| 4. | 268-2560 | [1] | CABLE AS | |
| 5. | 3S-2093 B | [5] | STRAP-CABLE | |
| 6. | 4P-7581 | [1] | CLIP (LADDER) | |
| B | USE AS REQUIRED | |||
#SEBP56300206
337-5814: WIRING GP-MONITOR
337-5814 WIRING GP-MONITOR -CAMERA, REAR
S/N D3X1-UP
PART OF 337-5845, 377-1846 ELECTRICAL AR
S/N D3X1-UP
PART OF 337-5845, 377-1846 ELECTRICAL AR
For full view, you need register
Parts for your M322D MH WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 350-9367 | [1] | HARNESS AS-WIRING (CAMERA, REAR) | |
| 7Y-3950 | [2] | TERMINAL-BLADE (14-GA TO 20-GA) | ||
| 7Y-3953 | [1] | CONNECTOR-RECEPTACLE | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 2. | 3S-2093 B | [2] | STRAP-CABLE | |
| B | USE AS REQUIRED | |||
#SEBP56300207
337-5778: WIRING GP-STABILIZER
337-5778 WIRING GP-STABILIZER -FRONT & REAR, LH & RH
S/N D3X1-UP
PART OF 337-5845, 377-1846 ELECTRICAL AR
S/N D3X1-UP
PART OF 337-5845, 377-1846 ELECTRICAL AR
For full view, you need register
Parts for your M322D MH WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 337-5779 | [1] | HARNESS AS-CONSOLE (STABILIZER) | |
| 292-2896 E | CONDUIT (61-CM) | |||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8L-8413 | [8] | STRAP-CABLE (WHITE) | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 104-1995 | [16] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 111-7898 | [4] | CONNECTOR (8-PIN) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 9X-3402 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 230-5008 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 264-7031 | [1] | SEAL-CONNECTOR | ||
| 2. | 7K-1181 B | [3] | STRAP-CABLE | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP56300208
364-2785: WIRING GP-STABILIZER
364-2785 WIRING GP-STABILIZER -UNDERCARRIAGE
S/N D3X1-UP
PART OF 360-2855, 360-4021 UNDERCARRIAGE AR
S/N D3X1-UP
PART OF 360-2855, 360-4021 UNDERCARRIAGE AR
For full view, you need register
Parts for your M322D MH WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 2. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 3. | 175-3350 | [1] | PLUG AS-CONNECTOR | |
| 4. | 175-3352 | [1] | PLUG AS-CONNECTOR | |
| 5. | 199-6978 | [1] | ROD | |
| 6. | 237-0075 | [1] | HARNESS AS-SENSOR (TRAVEL SPEED) | |
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDE RECEPTACLE AS & WEDGE) | ||||
| 114-8843 E | SLEEVE-PLASTIC (25-CM) | |||
| 128-4178 | [1] | TERMINAL AS | ||
| 2L-8068 | [1] | TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW) | ||
| 5P-6006 D | TUBE-HEAT SHRINK (9.52-MM DIA)(0.1-M) | |||
| 7. | 249-6923 Y | [1] | SWIVEL GP-ELECTRIC | |
| 8. | 364-2786 | [1] | HARNESS AS-SOLENOID | |
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDE RECEPTACLE AS & WEDGE) | ||||
| 104-6692 | [2] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDE RECEPTACLE AS & WEDGE) | ||||
| 8T-8730 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 131-1497 | [1] | TERMINAL AS-RING (10-GA TO 12-GA) | ||
| 2L-8068 | [1] | TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(4-CM) | |||
| 9. | 3F-9556 | [1] | LOCKWASHER | |
| 10. | 3S-2093 B | [24] | STRAP-CABLE | |
| 11. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 12. | 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | |
| 13. | 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | |
| (EACH PLUG KIT INCLUDES PLUG AS, WEDEG & INTERFACE SEAL) | ||||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56300209
364-2787: WIRING GP-STABILIZER
364-2787 WIRING GP-STABILIZER -UNDERCARRIAGE
S/N D3X1-UP
PART OF 360-4020, 360-4023 UNDERCARRIAGE AR
Type 1
S/N D3X1-UP
PART OF 360-4020, 360-4023 UNDERCARRIAGE AR
Type 1
For full view, you need register
Parts for your M322D MH WHEELED EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | |
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 2. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 3. | 175-3350 | [1] | PLUG AS-CONNECTOR | |
| 4. | 175-3352 | [1] | PLUG AS-CONNECTOR | |
| 5. | 199-6978 | [1] | ROD | |
| 6. | 237-0075 | [1] | HARNESS AS-SENSOR (TRAVEL SPEED) | |
| 9X-3401 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPATCLE AS & WEDGE) | ||||
| 114-8843 E | SLEEVE-PLASTIC (25-CM) | |||
| 128-4178 | [1] | TERMINAL AS | ||
| 7. | 249-6923 Y | [1] | SWIVEL GP-ELECTRIC | |
| 8. | 304-0752 | [1] | HARNESS AS-SOLENOID | |
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPATCLE AS & WEDGE) | ||||
| 114-8843 E | SLEEVE-PLASTIC (105-CM) | |||
| 8T-8730 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 128-4178 | [1] | TERMINAL AS | ||
| 9. | 3F-9556 | [1] | LOCKWASHER | |
| 10. | 3S-2093 B | [13] | STRAP-CABLE | |
| 11. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 12. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Special Instruction
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Caterpillar Parts SIS Catalog M322D MH :
Truck sale:
148.331
Caterpillar M322D MH, mobilbagger, Bau-Und Bergbauausrüstung
- wheel excavator
BERGERAT MONNOYEUR S.A.S.
Belgium
- wheel excavator
BERGERAT MONNOYEUR S.A.S.
Belgium
