FUEL SYSTEM
LINES GP-FUELFILTER GP-FUEL
PUMP GP-FUEL TRANSFER
PUMP GP-FUEL INJECTION
TANK GP-FUEL
FUEL SYSTEM
LINES GP-FUEL
#SEBP56500080
375-3089: LINES GP-FUEL
For full view, you need register
Parts for your 320D FM EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4I-0379 | [2] | VALVE-MANUAL (FUEL SHUTOFF) | |
| 2. | 003-7764 | [4] | END-HOSE | |
| 3. | 095-1386 | [11] | CLAMP-HOSE | |
| 4. | 135-8572 | [1] | BOLT AS | |
| 5. | 170-2901 | [1] | GROMMET | |
| 6. | 293-6789 | [1] | BRACKET AS | |
| 7. | 307-7804 | [1] | HOSE AS | |
| 8. | 375-3090 | [1] | SHEET AS | |
| 8T-3490 M | [3] | NUT-WELD (M10X1.5-THD) | ||
| 9. | 375-3092 | [1] | SPACER-SPECIAL | |
| 10. | 375-3093 | [1] | HOSE AS | |
| 11. | 381-9061 | [1] | BASE AS-FUEL FILTER | |
| 12. | 381-9064 | [1] | INDICATOR-FUEL FILTER CHANGE | |
| 13. | 438-5386 | [1] | FILTER AS-WATER SEP & FUEL (ULTRA HIGH EFFICIENCY)(ULTRA HIGH EFFICIENCY) | |
| 14. | 134-3299 | [1] | GROMMET | |
| 15. | 149-8142 | [2] | CONNECTOR | |
| 16. | 3K-0360 | [4] | SEAL-O-RING | |
| 17. | 8T-0119 | [2] | ELBOW | |
| 18. | 2R-1498 | [3] | GROMMET | |
| 19. | 5K-8451 | [13] | CLIP (LOOP) | |
| 20. | 6D-4636 | [3] | CLIP (LOOP) | |
| 21. | 7Y-8167 | [1] | GROMMET (50-MM ID) | |
| 22. | 8L-2786 | [3] | SEAL-O-RING | |
| 23. | 8T-1159 M | [3] | BOLT-SOCKET HEAD (M10X1.5X25-MM) | |
| 24. | 8T-4121 | [30] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 26. | 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | |
| 27. | 8T-4137 M | [18] | BOLT (M10X1.5X20-MM) | |
| 28. | 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | |
| 29. | 9M-8406 | [8] | CLIP (LOOP) | |
| 30. | 9S-4185 | [3] | PLUG (3/4-16-THD) | |
| 31. | 5P-1442 E | HOSE (75-CM) | ||
| 31A. | 5P-1442 E | HOSE (439-CM) | ||
| 31B. | 5P-1442 E | HOSE (30-CM) | ||
| 31C. | 5P-1442 E | HOSE (161-CM) | ||
| 32. | 4I-9521 | [2] | BAND-MARKER (RED, L1) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP56500081
297-7671: MOUNTING GP-FUEL FILTER
297-7671 MOUNTING GP-FUEL FILTER
S/N KHN1-UP
PART OF 272-4742, 309-4873 INSTALLATION AR-ENGINE
S/N KHN1-UP
PART OF 272-4742, 309-4873 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 320D FM EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 116-0118 | [1] | CLIP | |
| 3. | 135-8575 B | [4] | BOLT AS | |
| -OR- | ||||
| 135-8578 BJ | [2] | BOLT AS | ||
| 4. | 294-1831 | [2] | CLAMP | |
| 5. | 297-7672 | [1] | PLATE AS | |
| 6. | 297-7673 | [1] | BRACKET AS | |
| 7. | 297-7674 | [1] | PLATE AS | |
| 8. | 132-5789 | [1] | CLIP (LADDER) | |
| 9. | 7X-2535 M | [1] | BOLT (M6X1X60-MM) | |
| 10. | 7X-7729 | [1] | WASHER (11X25X3-MM THK) | |
| 11. | 8T-4121 | [7] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 13. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 14. | 8T-4182 M | [2] | BOLT (M10X1.5X45-MM) | |
| 15. | 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| 16. | 8T-6466 M | [3] | BOLT (M10X1.5X60-MM) | |
| 17. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| B | USE AS REQUIRED | |||
| J | USE 135-8578 BOLT AS. ON MACHINES WITH S/N PREFIXES BZF, EAX, GKS | |||
| M | METRIC PART | |||
#SEBP56500082
327-7207: MOUNTING GP-FUEL FILTER
327-7207 MOUNTING GP-FUEL FILTER
S/N KHN1-UP
PART OF 354-1056 COOLING AR-HIGH AMBIENT TEMP
S/N KHN1-UP
PART OF 354-1056 COOLING AR-HIGH AMBIENT TEMP
For full view, you need register
Parts for your 320D FM EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 116-0118 | [1] | CLIP | |
| 3. | 135-8575 | [6] | BOLT AS | |
| 4. | 297-7674 | [1] | PLATE AS | |
| 5. | 327-7211 | [1] | PLATE AS | |
| 6. | 327-7214 | [1] | PLATE AS | |
| 7. | 327-7217 | [1] | BLOCK | |
| 8. | 132-5789 | [1] | CLIP (LADDER) | |
| 9. | 8T-4121 | [9] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 11. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 12. | 8T-4182 M | [2] | BOLT (M10X1.5X45-MM) | |
| 13. | 8T-6466 M | [3] | BOLT (M10X1.5X60-MM) | |
| 14. | 8T-6685 M | [2] | BOLT (M10X1.5X110-MM) | |
| 15. | 4P-7581 | [1] | CLIP (LADDER) | |
| 16. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 17. | 8T-4896 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 18. | 294-1833 | [3] | CLAMP | |
| 19. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| 20. | 8C-8451 M | [3] | BOLT (M6X1X40-MM) | |
| M | METRIC PART | |||
#SEBP56500083
305-4678: MOUNTING GP-PUMP
305-4678 MOUNTING GP-PUMP -FUEL INJECTION
S/N GDC7002-UP
PART OF 272-4683 ENGINE AR-CORE, 327-7199 ENGINE AR-PRIMARY
S/N GDC7002-UP
PART OF 272-4683 ENGINE AR-CORE, 327-7199 ENGINE AR-PRIMARY
For full view, you need register
Parts for your 320D FM EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 326-4635 Y | [1] | PUMP GP-FUEL INJECTION | |
| 2. | 294-1834 | [1] | NUT | |
| 3. | 294-1846 | [1] | SEAL-O-RING | |
| 4. | 294-1836 | [1] | KEY-WOODRUFF | |
| 5. | 294-1839 | [1] | FLANGE | |
| 6. | 294-1841 | [1] | GASKET | |
| 7. | 294-1842 | [1] | SEAL-O-RING | |
| 8. | 095-8799 | [1] | BOLT (M8X1.25X30.5-MM) | |
| 9. | 294-1843 | [1] | BOLT (M10X1.5X47-MM) | |
| 10. | 294-1821 | [3] | BOLT (M8X1.25X35.5-MM) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56500084
326-4635: PUMP GP-FUEL INJECTION
326-4635 PUMP GP-FUEL INJECTION
S/N GDC7002-UP
PART OF 305-4678 MOUNTING GP-PUMP
S/N GDC7002-UP
PART OF 305-4678 MOUNTING GP-PUMP
For full view, you need register
Parts for your 320D FM EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 238-0120 | [1] | SENSOR GP-SPEED (INJECTION PUMP) | |
| 2. | 247-6019 | [1] | SEAL-O-RING | |
| 3. | 257-2381 | [2] | PIN | |
| 4. | 257-2382 | [2] | PLUG | |
| 5. | 258-8149 | [2] | SPRING | |
| 6. | 292-3751 | [1] | PUMP GP-FUEL TRANSFER | |
| 7. | 294-3031 | [1] | BOLT-SPECIAL | |
| 8. | 294-3032 | [1] | WASHER-SPECIAL | |
| 9. | 117-1385 | [1] | SEAL-O-RING | |
| 10. | 334-2932 | [1] | SEAL-O-RING | |
| 11. | 5A-3604 M | [5] | BOLT-SOCKET HEAD (M8X1.25X25-MM) | |
| 12. | 8L-2779 | [1] | SEAL-O-RING | |
| 13. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| 14. | 3B-4509 | [1] | LOCKWASHER | |
| 15. | 295-4801 M | [1] | NUT (M14X1.5-THD) | |
| M | METRIC PART | |||
#SEBP56500085
358-6634: RAIL GP-FUEL
For full view, you need register
Parts for your 320D FM EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 305-5291 | [1] | VALVE AS-RELIEF (FUEL RAIL) |
#SEBP56500086
278-3896: TANK & MTG GP-FUEL
For full view, you need register
Parts for your 320D FM EXCAVATOR:
CATERPILLAR SIS#SEBP56500087
278-3896: TANK & MTG GP-FUEL
For full view, you need register
Parts for your 320D FM EXCAVATOR:
CATERPILLAR SIS#SEBP56500088
366-6363: TANK GP-FUEL
366-6363 TANK GP-FUEL
S/N KHN1-148
410-L (108.3-US GAL)
PART OF 278-3896 TANK & MTG GP-FUEL
S/N KHN1-148
410-L (108.3-US GAL)
PART OF 278-3896 TANK & MTG GP-FUEL
For full view, you need register
Parts for your 320D FM EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4I-0378 | [1] | GASKET-RUBBER | |
| 2. | 5P-4924 | [1] | ELBOW | |
| 3. | 003-7764 | [1] | END-HOSE | |
| 4. | 128-4411 | [1] | VALVE AS (FUEL SHUTOFF) | |
| 6. | 164-4858 Y | [1] | CAP GP-FUEL FILLER (EXTREME SERVICE, LOCKABLE) | |
| 7. | 303-9933 J | [1] | STRAINER AS-FUEL (FLOAT GAUGE) | |
| 8. | 341-1842 | [1] | SENDER AS-FUEL LEVEL | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 10. | 095-0736 M | [5] | SCREW-MACHINE (M5X0.8X10-MM) | |
| 13. | 3J-1907 | [1] | SEAL-O-RING | |
| 14. | 8T-0328 | [5] | WASHER-HARD (5.5X10X1-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 303-9937 J | [1] | KIT-GAUGE (FUEL STRAINER) | ||
| (INCLUDES STOPPER & FLOAT GAUGE) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56500089
375-8620: TANK GP-FUEL
375-8620 TANK GP-FUEL
S/N KHN149-UP
410-L (108.3-US GAL)
PART OF 278-3896 TANK & MTG GP-FUEL
S/N KHN149-UP
410-L (108.3-US GAL)
PART OF 278-3896 TANK & MTG GP-FUEL
For full view, you need register
Parts for your 320D FM EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4I-0378 | [1] | GASKET-RUBBER | |
| 2. | 3J-1907 | [1] | SEAL-O-RING | |
| 3. | 5P-4924 | [1] | ELBOW | |
| -OR- | ||||
| 165-2881 AFN | [1] | VALVE-BALL (SEDIMENT, WATER) | ||
| 193-9696 AFN | [1] | HOSE-DRAIN | ||
| 4. | 349-7059 | [1] | CAP AS-FUEL (LOCKABLE, VENTED)(EXTREME SERVICE, LOCKABLE) | |
| 7D-7111 | [1] | SEAL-O-RING | ||
| 350-7735 | [1] | KIT-CAP FILTER (FUEL TANK) | ||
| 5. | 003-7764 | [1] | END-HOSE | |
| 6. | 9N-3666 | [1] | VALVE-MANUAL (FUEL SHUTOFF) | |
| 7. | 341-1842 | [1] | SENDER AS-FUEL LEVEL | |
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECPTACLE AS & WEDGE) | ||||
| 8. | 303-9933 J | [1] | STRAINER AS-FUEL (FLOAT GAUGE) | |
| 9. | 095-0736 M | [5] | SCREW-MACHINE (M5X0.8X10-MM) | |
| 10. | 8T-0328 | [5] | WASHER-HARD (5.5X10X1-MM THK) | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 303-9937 J | [1] | KIT-GAUGE (FUEL STRAINER) | ||
| (INCLUDES STOPPER & FLOAT GAUGE) | ||||
| A | NOT PART OF THIS GROUP | |||
| F | NOT SHOWN | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| N | OPTIONAL USE TO DRAIN TANK IN COLD WEATHER | |||
Information:
FUEL SYSTEM
LINES GP-FUEL
Disassembly and Assembly
Caterpillar Parts SIS Catalog 320D FM :
Truck sale:
105,018
55,000
