AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

230-0961 WIRING GP-UNIT INJECTOR S/N TXF1-UP; MHX7634-UP PART OF 317-9990, 356-2433 ENGINE AR-CORE ALSO AN ATTACHMENT 349D


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL
POWER TRAIN AR

EXCAVATOR 349D EXCAVATOR MEN
 349D & 349D L Excavators MEN00001-UP (MACHINE) POWERED BY C13 Engine SEBP5660 349D MEN   (2011)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-QUICK COUPLER
299-2604 WIRING GP-QUICK COUPLER
WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
WIRING GP-UNIT INJECTOR
230-0961 WIRING GP-UNIT INJECTOR
303-2702 INSTALLATION AR-RADIO
 

#SEBP56600460
 

230-0961: WIRING GP-UNIT INJECTOR

230-0961 WIRING GP-UNIT INJECTOR
S/N TXF1-UP; MHX7634-UP
PART OF 317-9990, 356-2433 ENGINE AR-CORE
ALSO AN ATTACHMENT
i02229274 SEBP5660
2300961 WIRING GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 349D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-6508 [6] CAP AS  
2. 418-7614 Y [1] HARNESS AS-WIRING (UNIT INJECTOR)  
3. 6V-8837 M [5] BOLT (M6X1X16-MM)  
4. 6V-8836 M [2] BOLT (M6X1X14-MM)  
5. 9X-8267 [2] WASHER (6.6X12X2-MM THK)  
6. 237-9960 [5] CLIP (LADDER)  
7. 3S-2093 [5] STRAP-CABLE  
8. 5P-0537 [5] WASHER-HARD (7.2X14.5X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56600461
 

227-6044: DRIVE GP-FINAL

227-6044 DRIVE GP-FINAL -WITH MOTOR
S/N NNF1-UP; MEN1-UP
PART OF 353-0500 DRIVE GP-FINAL
i02219641 SEBP5660
2276044 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 225-4504 Y [1] MOTOR & MTG GP-TRAVEL  
2. 227-6045 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP56600462
 

227-6045: DRIVE GP-FINAL

227-6045 DRIVE GP-FINAL -WITHOUT MOTOR
S/N NNF1-UP; MEN1-UP
PART OF 227-6044 DRIVE GP-FINAL
i02219800 SEBP5660
2276045 DRIVE GP-FINAL Parts scheme 2276045 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2R-0524 [2] CONE-BEARING  
2. 2R-0525 [2] CUP-BEARING  
3. 4I-7576 [14] WASHER (66.3X104X3-MM THK)  
4. 7M-8485 [2] SEAL-O-RING  
5. 7Y-0661 [3] SHAFT-PLANETARY  
6. 7Y-0662 [4] SHAFT-PLANETARY  
7. 199-4583 [11] BEARING AS  
8. 7Y-0808 B [1] SHIM (1.6-MM THK)  
9. 7Y-1469 [1] COUPLING  
10. 7Y-1470 [1] GEAR-SUN (21-TEETH)  
11. 7Y-1472 B [1] SHIM (0.15-MM THK)  
12. 7Y-1473 B [1] SHIM (0.3-MM THK)  
13. 7Y-1474 B [1] SHIM (0.4-MM THK)  
14. 7Y-1475 B [1] SHIM (0.5-MM THK)  
15. 7Y-1476 B [1] SHIM (0.6-MM THK)  
16. 7Y-1477 B [1] SHIM (0.7-MM THK)  
17. 7Y-1478 B [1] SHIM (0.8-MM THK)  
18. 7Y-1479 B [1] SHIM (1-MM THK)  
19. 7Y-1480 B [1] SHIM (1.6-MM THK)  
20. 7Y-1482 [1] CARRIER-PLANETARY  
21. 7Y-1483 [1] GEAR-RING (63-TEETH)  
22. 7Y-1485 [1] CARRIER-PLANETARY  
23. 7Y-1487 [1] GEAR-RING (85-TEETH)  
24. 7Y-1488 [1] CARRIER AS  
25. 7Y-1491 [1] GEAR-SUN (21-TEETH)  
26. 7Y-1493 [1] SPACER (8.7X50X14-MM THK)  
27. 7Y-1495 [3] GEAR-PLANETARY (29-TEETH)  
28. 7Y-1498 [1] COVER  
29. 7Y-1499 [3] GEAR-PLANETARY (20-TEETH)  
30. 7Y-1504 [4] GEAR-PLANETARY (20-TEETH)  
31. 7Y-5235 M [20] BOLT (M24X3X190-MM)  
32. 110-7217 [2] RING-RETAINING  
33. 114-1541 [6] PIN-DOWEL  
34. 169-5559 [1] GEAR-SUN (26-TEETH)  
35. 199-4719 [1] GEAR-COUPLING  
36. 200-3489 [1] HOUSING-MOTOR  
37. 200-3490 [1] HOUSING-GEAR  
38. 205-9025 [1] SEAL GP-DUO-CONE  
  205-9024 [2] RING-TORIC  
39. 227-6048 [12] WASHER (26X40X4-MM THK)  
40. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
41. 199-4582 [3] BEARING AS  
42. 095-0891 [7] PIN-SPRING  
43. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
44. 3E-2338 [2] PLUG-PIPE (FINAL DRIVE, OIL DRAIN, FILL)  
45. 6V-8133 M [12] BOLT (M24X3X80-MM)  
46. 7Y-1484 [1] SPACER (191X221X8.5-MM THK)  
47. 7Y-1492 [2] SPACER (67X101.1X10-MM THK)  
48. 8C-5240 [1] SEAL-O-RING  
49. 8T-3957 M [10] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
50. 8T-4167 [20] WASHER-HARD (26X44X4-MM THK)  
51. 8T-4240 [3] RING-RETAINING  
52. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP56600463
 

333-3036: DRIVE GP-FINAL

333-3036 DRIVE GP-FINAL -WITHOUT MOTOR
S/N NNF1-UP; MEN1-UP
PART OF 353-0528 DRIVE GP-FINAL
FIELD REPLACEMENT ORDER @@@@@521-3847@@@@@, @@@@@521-3848@@@@@
i04316228 SEBP5660
3333036 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2R-0524 [2] CONE-BEARING  
2. 2R-0525 [2] CUP-BEARING  
3. 3E-2338 [2] PLUG-PIPE  
4. 4I-7576 [14] WASHER (66.3X104X3-MM THK)  
5. 7Y-0661 [3] SHAFT-PLANETARY  
6. 7Y-0662 [4] SHAFT-PLANETARY  
7. 199-4583 [11] BEARING AS  
8. 7Y-0808 B [1] SHIM (1.6-MM THK)  
9. 7Y-1469 [1] COUPLING  
10. 7Y-1470 [1] GEAR-SUN (21-TEETH)  
11. 7Y-1472 B [1] SHIM (0.15-MM THK)  
  7Y-1473 B [1] SHIM (0.3-MM THK)  
  7Y-1474 B [1] SHIM (0.4-MM THK)  
  7Y-1475 B [1] SHIM (0.5-MM THK)  
  7Y-1476 B [1] SHIM (0.6-MM THK)  
  7Y-1477 B [1] SHIM (0.7-MM THK)  
  7Y-1478 B [1] SHIM (0.8-MM THK)  
  7Y-1479 B [1] SHIM (1-MM THK)  
  7Y-1480 B [1] SHIM (1.6-MM THK)  
20. 7Y-1482 [1] CARRIER-PLANETARY  
21. 7Y-1483 [1] GEAR-RING (63-TEETH)  
22. 7Y-1485 [1] CARRIER-PLANETARY  
23. 7Y-1487 [1] GEAR-RING (85-TEETH)  
24. 7Y-1488 [1] CARRIER AS  
  7Y-0656 [3] SHAFT-PLANETARY  
25. 7Y-1491 [1] GEAR-SUN (21-TEETH)  
26. 7Y-1493 [1] SPACER (8.7X50X14-MM THK)  
27. 7Y-1495 [3] GEAR-PLANETARY (29-TEETH)  
28. 7Y-1498 [1] COVER  
29. 7Y-1499 [3] GEAR-PLANETARY (20-TEETH)  
30. 7Y-1504 [4] GEAR-PLANETARY (20-TEETH)  
31. 454-6929 M [20] BOLT (M24X3X190-MM)  
32. 110-7217 [2] RING-RETAINING  
33. 114-1541 [6] PIN-DOWEL  
34. 169-5559 [1] GEAR-SUN (26-TEETH)  
35. 199-4719 [1] GEAR-COUPLING  
36. 227-6048 [12] WASHER (26X40X4-MM THK)  
37. 255-2272 [1] SEAL GP-DUO-CONE  
38. 333-3033 [1] HOUSING-MOTOR  
39. 333-3034 [1] HOUSING-GEAR  
40. 333-3035 [1] PLATE  
41. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
42. 199-4582 [3] BEARING AS  
43. 095-0891 [7] PIN-SPRING  
44. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
45. 4S-5924 [1] SEAL-O-RING  
46. 6V-8133 M [12] BOLT (M24X3X80-MM)  
47. 6V-8200 M [20] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
48. 7M-8485 [2] SEAL-O-RING  
49. 7Y-1484 [1] SPACER (191X221X8.5-MM THK)  
50. 7Y-1492 [2] SPACER (67X101.1X10-MM THK)  
51. 8C-5240 [1] SEAL-O-RING  
52. 8T-3957 M [10] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
53. 451-2177 [20] WASHER-HARD (26X44X4-MM THK)  
54. 451-2182 [20] WASHER-HARD (13.5X25.5X3-MM THK)  
55. 8T-4240 [3] RING-RETAINING  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP56600464
 

353-0500: DRIVE GP-FINAL

353-0500 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N NNF1-UP; MEN1-UP
PART OF 227-6042 POWER TRAIN AR
i04126949 SEBP5660
3530500 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-6399 Y [1] SPROCKET GP (NON-SEGMENTED)(NON-SEGMENTED)  
2. 227-6044 Y [1] DRIVE GP-FINAL (WITH MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP56600465
 

353-0527: DRIVE GP-FINAL

353-0527 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N NNF1-UP; MEN1-UP
PART OF 227-6042 POWER TRAIN AR
i04269576 SEBP5660
3530527 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-6399 Y [1] SPROCKET GP (NON-SEGMENTED)  
2. 353-0528 Y [1] DRIVE GP-FINAL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP56600466
 

353-0528: DRIVE GP-FINAL

353-0528 DRIVE GP-FINAL -WITH MOTOR
S/N NNF1-UP; MEN1-UP
PART OF 353-0527 DRIVE GP-FINAL
i04273970 SEBP5660
3530528 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 225-4504 Y [1] MOTOR & MTG GP-TRAVEL  
2. 333-3036 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP56600467
 

521-3847: DRIVE GP-FINAL

521-3847 DRIVE GP-FINAL -WITHOUT MOTOR, LH
S/N NNF1-UP; MEN1-UP
FIELD REPLACEMENT FOR @@@@@333-3036@@@@@
i07352121 SEBP5660
5213847 DRIVE GP-FINAL Parts scheme 5213847 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 346-5556 [2] CONE-BEARING  
2. 2R-0525 [2] CUP-BEARING  
3. 7Y-0661 [3] SHAFT-PLANETARY  
4. 7Y-0662 [4] SHAFT-PLANETARY  
5. 199-4583 [11] BEARING AS  
6. 7Y-0808 B [1] SHIM (1.6-MM THK)  
7. 7Y-1469 [1] COUPLING  
8. 7Y-1470 [1] GEAR-SUN (21-TEETH)  
9. 7Y-1474 B [1] SHIM (0.4-MM THK)  
  7Y-1472 B [1] SHIM (0.15-MM THK)  
  7Y-1473 B [1] SHIM (0.3-MM THK)  
  7Y-1475 B [1] SHIM (0.5-MM THK)  
  7Y-1476 B [1] SHIM (0.6-MM THK)  
  7Y-1477 B [1] SHIM (0.7-MM THK)  
  7Y-1478 B [1] SHIM (0.8-MM THK)  
  7Y-1479 B [1] SHIM (1-MM THK)  
  7Y-1480 B [1] SHIM (1.6-MM THK)  
10. 7Y-1482 [1] CARRIER-PLANETARY  
11. 7Y-1483 [1] GEAR-RING (63-TEETH)  
12. 7Y-1485 [1] CARRIER-PLANETARY  
13. 7Y-1487 [1] GEAR-RING (85-TEETH)  
14. 7Y-1488 [1] CARRIER AS  
  7Y-0656 [3] SHAFT-PLANETARY  
15. 7Y-1491 [1] GEAR-SUN (21-TEETH)  
16. 7Y-1493 [1] SPACER (8.7X50X14-MM THK)  
17. 7Y-1495 [3] GEAR-PLANETARY (29-TEETH)  
18. 7Y-1498 [1] COVER  
19. 7Y-1499 [3] GEAR-PLANETARY (20-TEETH)  
20. 7Y-1504 [4] GEAR-PLANETARY (20-TEETH)  
21. 110-7217 [2] RING-RETAINING  
22. 169-5559 [1] GEAR-SUN (26-TEETH)  
23. 199-4719 [1] GEAR-COUPLING  
24. 227-6048 [12] WASHER (26X40X4-MM THK)  
25. 255-2272 [1] SEAL GP-DUO-CONE  
26. 333-3034 [1] HOUSING-GEAR  
27. 333-3035 [1] PLATE  
28. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
29. 199-4582 [3] BEARING AS  
30. 095-0891 [7] PIN-SPRING  
31. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
32. 114-1541 [6] PIN-DOWEL  
33. 452-3521 [1] HOUSING-MOTOR  
34. 3E-2338 [2] PLUG-PIPE  
35. 4I-7576 [14] WASHER (66.3X104X3-MM THK)  
36. 4S-5924 [1] SEAL-O-RING  
37. 6V-8133 M [12] BOLT (M24X3X80-MM)  
38. 6V-8200 M [20] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
39. 451-2182 [20] WASHER-HARD (13.5X25.5X3-MM THK)  
40. 454-6929 M [20] BOLT (M24X3X190-MM)  
41. 7M-8485 [2] SEAL-O-RING  
50. 7Y-1484 [1] SPACER (191X221X8.5-MM THK)  
51. 7Y-1492 [2] SPACER (67X101.1X10-MM THK)  
52. 8C-5240 [1] SEAL-O-RING  
53. 451-2177 [20] WASHER-HARD (26X44X4-MM THK)  
54. 8T-3957 M [10] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
55. 8T-4240 [3] RING-RETAINING  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP56600468
 

521-3848: DRIVE GP-FINAL

521-3848 DRIVE GP-FINAL -WITHOUT MOTOR, RH
S/N NNF1-UP; MEN1-UP
FIELD REPLACEMENT FOR @@@@@333-3036@@@@@
i07352150 SEBP5660
5213848 DRIVE GP-FINAL Parts scheme 5213848 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 346-5556 [2] CONE-BEARING  
2. 2R-0525 [2] CUP-BEARING  
3. 7Y-0661 [3] SHAFT-PLANETARY  
4. 7Y-0662 [4] SHAFT-PLANETARY  
5. 199-4583 [11] BEARING AS  
6. 7Y-0808 B [1] SHIM (1.6-MM THK)  
7. 7Y-1469 [1] COUPLING  
8. 7Y-1470 [1] GEAR-SUN (21-TEETH)  
9. 7Y-1474 B [1] SHIM (0.4-MM THK)  
  7Y-1472 B [1] SHIM (0.15-MM THK)  
  7Y-1473 B [1] SHIM (0.3-MM THK)  
  7Y-1475 B [1] SHIM (0.5-MM THK)  
  7Y-1476 B [1] SHIM (0.6-MM THK)  
  7Y-1477 B [1] SHIM (0.7-MM THK)  
  7Y-1478 B [1] SHIM (0.8-MM THK)  
  7Y-1479 B [1] SHIM (1-MM THK)  
  7Y-1480 B [1] SHIM (1.6-MM THK)  
10. 7Y-1482 [1] CARRIER-PLANETARY  
11. 7Y-1483 [1] GEAR-RING (63-TEETH)  
12. 7Y-1485 [1] CARRIER-PLANETARY  
13. 7Y-1487 [1] GEAR-RING (85-TEETH)  
14. 7Y-1488 [1] CARRIER AS  
  7Y-0656 [3] SHAFT-PLANETARY  
15. 7Y-1491 [1] GEAR-SUN (21-TEETH)  
16. 7Y-1493 [1] SPACER (8.7X50X14-MM THK)  
17. 7Y-1495 [3] GEAR-PLANETARY (29-TEETH)  
18. 7Y-1498 [1] COVER  
19. 7Y-1499 [3] GEAR-PLANETARY (20-TEETH)  
20. 7Y-1504 [4] GEAR-PLANETARY (20-TEETH)  
21. 110-7217 [2] RING-RETAINING  
22. 169-5559 [1] GEAR-SUN (26-TEETH)  
23. 199-4719 [1] GEAR-COUPLING  
24. 227-6048 [12] WASHER (26X40X4-MM THK)  
25. 255-2272 [1] SEAL GP-DUO-CONE  
  205-9114 [2] RING-TORIC  
26. 333-3034 [1] HOUSING-GEAR  
27. 333-3035 [1] PLATE  
28. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
29. 199-4582 [3] BEARING AS  
30. 095-0891 [7] PIN-SPRING  
31. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
32. 114-1541 [6] PIN-DOWEL  
33. 452-3520 [1] HOUSING-MOTOR  
34. 3E-2338 [2] PLUG-PIPE  
35. 4I-7576 [14] WASHER (66.3X104X3-MM THK)  
36. 4S-5924 [1] SEAL-O-RING  
37. 6V-8133 M [12] BOLT (M24X3X80-MM)  
38. 6V-8200 M [20] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
39. 451-2182 [20] WASHER-HARD (13.5X25.5X3-MM THK)  
40. 454-6929 M [20] BOLT (M24X3X190-MM)  
41. 7M-8485 [2] SEAL-O-RING  
50. 7Y-1484 [1] SPACER (191X221X8.5-MM THK)  
51. 7Y-1492 [2] SPACER (67X101.1X10-MM THK)  
52. 8C-5240 [1] SEAL-O-RING  
53. 451-2177 [20] WASHER-HARD (26X44X4-MM THK)  
54. 8T-3957 M [10] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
55. 8T-4240 [3] RING-RETAINING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP56600469
 

227-6042: POWER TRAIN AR

227-6042 POWER TRAIN AR
S/N NNF1-UP; MEN1-UP
PART OF 359-2568, 359-2569 GENERAL AR
i05714370 SEBP5660
  For full view, you need register

Parts for your 349D EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  296-6252 Y [1] DRIVE GP-SWING (WITH MOTOR, LH)  
  296-6249 Y [1] DRIVE GP-SWING (WITH MOTOR, RH)  
  227-6050 Y [1] FASTENER GP-SWING & FINAL DR  
  227-6044 Y [2] DRIVE GP-FINAL (WITH MOTOR)  
    -OR-
  353-0500 Y [2] DRIVE GP-FINAL (WITH MOTOR, SPROCKET)  
    -OR-
  353-0527 Y [2] DRIVE GP-FINAL (WITH MOTOR, SPROCKET)  
  115-6399 Y [2] SPROCKET GP (NON-SEGMENTED)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Battery Disconnect Switch
345D, 349D and 349D2 Excavators
Battery or Battery Cable - Inspect/Replace
345D, 349D and 349D2 Excavators
Battery - Recycle
345D, 349D and 349D2 Excavators
SmartBoom Operation - If Equipped
345D, 349D and 349D2 Excavators
SmartBoom Control - If Equipped
345D, 349D and 349D2 Excavators
Power Receptacle - If Equipped
345D, 349D and 349D2 Excavators
Camera Harness - Disconnect and Connect
345D, 349D and 349D2 Excavators
Fuses - Replace
345D, 349D and 349D2 Excavators
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for the 291-7757 Platform Wiring Gp {1408}
Installation Procedure for the 291-7757 Platform Wiring Gp {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Installation of the 291-7758 Medium Pressure Wiring {1408}
Installation of the 291-7758 Medium Pressure Wiring {1408}
Installation of the 452-2031 Hammer Filter Ar on Certain Hydraulic Excavators{1408, 5068}
Installation of the 452-2031 Hammer Filter Ar on Certain Hydraulic Excavators{1408, 5068}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Installation Procedure of 259-4889 Chassis Wiring Gp on Certain Hydraulic Excavators{1408}
Installation Procedure of 259-4889 Chassis Wiring Gp on Certain Hydraulic Excavators{1408}
Installation of the 299-2598 Chassis Wiring Gp on Certain Hydraulic Excavators{1408, 7553}
Installation of the 299-2598 Chassis Wiring Gp on Certain Hydraulic Excavators{1408, 7553}
Master Guide for Field Installation of <NOBR>459-8880</NOBR> Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 5057, 5059, 5063, 7405, 7553, 7557}
Master Guide for Field Installation of 459-8880 Auxiliary Control Ar on Certain Hydraulic Excavators {1408, 5057, 5059, 5063, 7405, 7553, 7557}
Installation Procedure for 336-6188 Quick Coupler Wiring Gp for Certain Hydraulic Excavators{1408}
Installation Procedure for 336-6188 Quick Coupler Wiring Gp for Certain Hydraulic Excavators{1408}
Installation Procedure for the <NOBR>456-4107</NOBR> Coupler Control Ar on Certain Hydraulic Excavators {1408, 5057, 7301, 7405, 7557}
Installation Procedure for the 456-4107 Coupler Control Ar on Certain Hydraulic Excavators {1408, 5057, 7301, 7405, 7557}
Installation Procedure for 350-8454 Wiring Harness Fastener Gp for Certain Hydraulic Excavators{1408, 7553}
Installation Procedure for 350-8454 Wiring Harness Fastener Gp for Certain Hydraulic Excavators{1408, 7553}
Installation Procedure for 299-2599 Wiring Gp for Certain Hydraulic Excavators{1408}
Installation Procedure for 299-2599 Wiring Gp for Certain Hydraulic Excavators{1408}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Specifications
Electronic Unit Injector Wiring
C11 and C13 Engines
Electronic Unit Injector Wiring
C11 and C13 Engines
Tool Operating Manual
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Relays
345D, 349D and 349D2 Excavators Tool Control System
Senders
345D, 349D and 349D2 Excavators Tool Control System
Sensors
345D, 349D and 349D2 Excavators Tool Control System
Switches
345D, 349D and 349D2 Excavators Tool Control System
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines
Sensors
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Switches
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
C11 and C13 Engines for Caterpillar Built Machines
Wiring Harness (Open Circuit) - Test
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Wiring Harness (Short Circuit) - Test
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Overload Warning - Set - If Equipped
345D, 349D and 349D2 Excavators Hydraulic System
System Schematic
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Electrical Connector - Inspect
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
System Schematic
Machine Security System (MSS3i) Integrated
Troubleshooting
CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
C11 and C13 Engines for Caterpillar Built Machines
CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
C11 and C13 Engines for Caterpillar Built Machines
Electrical Connectors - Inspect
C11 and C13 Engines for Caterpillar Built Machines
CID 0091 FMI 08 Throttle Position signal abnormal
C11 and C13 Engines for Caterpillar Built Machines
CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C11 and C13 Engines for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C13 Engines for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C13 Engines for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines
Fuel Filter Differential Pressure Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines
CID 0174 FMI 03 Fuel Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines
CID 0174 FMI 04 Fuel Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines
CID 2417 FMI 05 Ether Injection Control Solenoid current low
C11 and C13 Engines for Caterpillar Built Machines
CID 2417 FMI 06 Ether Injection Control Solenoid current high
C11 and C13 Engines for Caterpillar Built Machines
Sensors and Electrical Connectors
C11 and C13 Engines for Caterpillar Built Machines
Engine Fan Control Solenoid Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines
Throttle Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines
MID 039 - CID 0096 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C11 and C13 Engines for Caterpillar Built Machines
Low Engine Oil Pressure Lamp Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines
CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C11 and C13 Engines for Caterpillar Built Machines
CID 0190 FMI 08 Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines
MID 039 - CID 0096 - FMI 05
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0110 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0110 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0586 - FMI 05
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0586 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 2280 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Electrical Component and Connector Locations
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0588 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0588 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0600 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
A New Console Harness Assembly Is Available for Certain Excavators {1408}
2015/04/13
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21
The Correct Orientation of the Atmospheric Sensor Must Be Maintained on Certain Tier 3 Machine Engines {1923}
The Correct Orientation of the Atmospheric Sensor Must Be Maintained on Certain Tier 3 Machine Engines {1923}
A New Engine Harness Assembly Is Now Used on Certain Machines Equipped with C11 and C13 Engines {1408}
2013/04/09
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
The Control Panel Assembly has been Improved for Certain 311D to 349D Excavators {1408, 7301}
2014/03/27
A New Special Instruction is Available for Troubleshooting the Upper Window Wiper Relay Circuit on Certain 311D-349D, E Series, and F Series Excavators {1408, 7305}
2015/08/07
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 349D :

WIRING GP-REFUELING PUMP
238-1570 WIRING GP-REFUELING PUMP
WIRING GP-QUICK COUPLER
299-2604 WIRING GP-QUICK COUPLER
WIRING GP-PLATFORM
291-7768 WIRING GP-PLATFORM
WIRING GP-PLATFORM
291-7757 WIRING GP-PLATFORM
WIRING GP-MONITOR
306-8589 WIRING GP-MONITOR
WIRING GP-MONITOR
306-8544 WIRING GP-MONITOR
WIRING GP-MEDIUM PRESSURE
291-7758 WIRING GP-MEDIUM PRESSURE
WIRING GP-HAMMER
299-2607 WIRING GP-HAMMER
DRIVE GP-FINAL
227-6044 DRIVE GP-FINAL
DRIVE GP-FINAL
227-6045 DRIVE GP-FINAL
DRIVE GP-FINAL
333-3036 DRIVE GP-FINAL
DRIVE GP-FINAL
353-0500 DRIVE GP-FINAL
DRIVE GP-FINAL
353-0527 DRIVE GP-FINAL
DRIVE GP-FINAL
353-0528 DRIVE GP-FINAL
DRIVE GP-FINAL
521-3847 DRIVE GP-FINAL
DRIVE GP-FINAL
521-3848 DRIVE GP-FINAL
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.