251-0435 WIRING GP-CONSOLE -RH S/N JGB1-490; KHS1-124 PART OF 251-0433 WIRING GP-CONSOLE 349D L EXCAVATOR

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 251-0435 WIRING GP-
1. 251-0435 WIRING GP-
2. 299-2602 WIRING GP-
3. 354-0015 WIRING GP-
4. 306-8346 WIRING GP-
5. 350-8247 WIRING GP-
6. 299-2605 WIRING GP-
7. 219-7462 WIRING GP-
8. 354-0045 WIRING GP-
9. 354-0045 WIRING GP-
0. INFORMATION

EXCAVATOR 349D L EXCAVATOR JGB
349D L Excavators JGB00001-UP (MACHINE) POWERED BY C13 Engine SEBP5662 349D L JGB (2011)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

231-1836 WIRING GP-CONSOLE

251-0433 WIRING GP-CONSOLE

251-0435 WIRING GP-CONSOLE

299-2602 WIRING GP-CONTROL

354-0015 WIRING GP-CONTROL

#SEBP56620330

251-0435: WIRING GP-CONSOLE

WIRING GP-CONSOLE

251-0435 WIRING GP-CONSOLE -RH
S/N JGB1-490; KHS1-124
PART OF 251-0433 WIRING GP-CONSOLE

i02475166 SEBP5662

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[5]	STRAP-CABLE
2.	7K-1181	[2]	STRAP-CABLE
3.	283-3074	[1]	SWITCH AS-TOGGLE (AUTO/MANUAL ENG SPEED CONTROL)
4.	163-6711	[1]	SWITCH AS-TOGGLE (MANUAL ENGINE SPEED CONTROL)
5.	163-6795	[2]	STRAP-CABLE
6.	251-0602	[1]	BRACKET
7.	259-4877	[1]	HARNESS AS-CONSOLE
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[10]	STRAP-CABLE
	7Y-3967	[2]	TERMINAL AS
			(EACH INCLUDES)
	7Y-3963	[1]	TERMINAL-BULLET (FEMALE)
	7Y-3965	[1]	TUBE (RECEPTACLE TERMINAL)
	102-7964	[1]	PLUG-CONNECTOR (16-PIN)
	102-7965	[14]	TERMINAL (FEMALE)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	264-7031	[1]	SEAL-CONNECTOR
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	231-2295	[1]	PLUG AS-CONNECTOR (8-PIN)
	264-7033	[1]	SEAL-CONNECTOR
	239-7352	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
	247-2693	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
8.	9X-2042 M	[3]	SCREW-TRUSS HEAD (M6X1X12-MM)
9.	8C-5063 E		CONDUIT-FLEXIBLE (15.49-MM ID, SPLIT)(10-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP56620331

251-0435: WIRING GP-CONSOLE

WIRING GP-CONSOLE

251-0435 WIRING GP-CONSOLE -RH
S/N JGB491-UP; KHS125-UP
PART OF 251-0433 WIRING GP-CONSOLE

i04885377 SEBP5662

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[4]	STRAP-CABLE
2.	7K-1181	[2]	STRAP-CABLE
3.	163-6795 C	[1]	STRAP-CABLE
4.	373-8980 C	[1]	HARNESS AS-CONSOLE
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8730	[8]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[11]	STRAP-CABLE
	7Y-3963	[2]	TERMINAL-BULLET (FEMALE)
	7Y-3965	[2]	TUBE (RECEPTACLE TERMINAL)
	8T-8737	[27]	PLUG-SEAL
	102-7964	[1]	PLUG-CONNECTOR (16-PIN)
	102-7965	[14]	TERMINAL (FEMALE)
	9W-0852	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[7]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-4841	[1]	WEDGE-PLUG LOCK (21-PIN)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	9X-3402	[24]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[24]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2259	[1]	WEDGE-PLUG LOCK (8-PIN)
	230-4009	[1]	PLUG AS-CONNECTOR (12-PIN)
	264-7034	[1]	SEAL-CONNECTOR
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	264-7031	[1]	SEAL-CONNECTOR
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	231-2295	[1]	PLUG AS-CONNECTOR (8-PIN)
	264-7033	[1]	SEAL-CONNECTOR
	238-2363	[7]	TERMINAL (FEMALE)
	239-7352	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
	247-2693	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
5.	3E-9375 CE		CONDUIT (10-CM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER

#SEBP56620332

299-2602: WIRING GP-CONTROL

WIRING GP-CONTROL

299-2602 WIRING GP-CONTROL -SYSTEM 16, 1-WAY, 2-PUMP
S/N JGB1-UP; KHS1-UP
PART OF 285-1787 CONTROL AR-AUXILIARY
AN ATTACHMENT

i04191051 SEBP5662

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[5]	STRAP-CABLE
2.	6G-2263 C	[2]	SPACER (10.5X19X28.5-MM THK)
3.	7K-1181 C	[15]	STRAP-CABLE
4.	186-4574	[1]	PLUG AS
	8T-8737	[2]	PLUG-SEAL
5.	299-2649	[1]	HARNESS AS-VALVE (PUMP CONTROL)
	8T-8737	[6]	PLUG-SEAL
	9X-3402	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	243-4509	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
6.	132-5789 C	[3]	CLIP (LADDER)
7.	4P-7581	[2]	CLIP (LADDER)
8.	8T-4121 C	[4]	WASHER-HARD (11X21X2.5-MM THK)
9.	8T-4137 CM	[2]	BOLT (M10X1.5X20-MM)
10.	8T-4185 CM	[2]	BOLT (M10X1.5X50-MM)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP56620333

354-0015: WIRING GP-CONTROL

WIRING GP-CONTROL

354-0015 WIRING GP-CONTROL -ACCUGRADE READY
S/N JGB1-UP; KHS1-UP
PART OF 299-2996 WIRING GP-CHASSIS
AN ATTACHMENT

i03881117 SEBP5662

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[4]	STRAP-CABLE
2.	091-9035	[1]	SPACER (11X25X20-MM THK)
3.	275-6842	[1]	HARNESS AS-CONTROL (DISPLAY, GPS RADIO)
	8T-8737	[6]	PLUG-SEAL
	9X-3401	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	167-8987	[1]	PLUG AS-CONNECTOR (8-PIN)
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
4.	132-5789	[1]	CLIP (LADDER)
5.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4196 M	[1]	BOLT (M10X1.5X35-MM)
	M		METRIC PART

#SEBP56620334

306-8346: WIRING GP-CONVERTER

WIRING GP-CONVERTER

306-8346 WIRING GP-CONVERTER -COMMUNICATION RADIO
S/N JGB1-UP; KHS1-UP
PART OF 303-2702 INSTALLATION AR-RADIO
AN ATTACHMENT

i02849002 SEBP5662

3068346 WIRING GP-CONVERTER Parts scheme

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[7]	STRAP-CABLE
2.	7K-1181	[14]	STRAP-CABLE
3.	306-8411	[1]	HARNESS AS-CAB
	155-2271	[2]	KIT-CONNECTING PLUG (4-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	8T-8737	[12]	PLUG-SEAL
	102-8804	[2]	KIT-RECEPTACLE (4-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	8T-8730	[4]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[6]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	3S-2093	[16]	STRAP-CABLE
	7Y-3966	[2]	TERMINAL AS
			(EACH INCLUDES)
	7Y-3962	[1]	TERMINAL-BULLET (MALE)
	7Y-3964	[1]	TUBE (CONNECTOR TERMINAL)
	2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)
4.	306-8641	[2]	CABLE AS
5.	324-5770	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
6.	5C-9553 M	[4]	BOLT (M6X1X16-MM)
7.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP56620335

350-8247: WIRING GP-CONVERTER

WIRING GP-CONVERTER

350-8247 WIRING GP-CONVERTER
S/N JGB1-UP; KHS1-UP
12-VOLT, 10-AMP POWER SUPPLY
PART OF 341-3130 OPTION AR-CAB
CANNOT BE USED WITH @@@@@303-2702@@@@@
AN ATTACHMENT

i04039396 SEBP5662

3508247 WIRING GP-CONVERTER Parts scheme

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	475-2681	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
2.	324-5771	[2]	SOCKET-AUXILIARY POWER (12-VOLT)
3.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
4.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
	M		METRIC PART

#SEBP56620336

299-2605: WIRING GP-COUNTERWEIGHT

WIRING GP-COUNTERWEIGHT

299-2605 WIRING GP-COUNTERWEIGHT -COUNTERWEIGHT REMOVAL
S/N JGB1-UP
PART OF 309-0166, 309-0167 COUNTERWEIGHT AR
AN ATTACHMENT

i03838583 SEBP5662

2992605 WIRING GP-COUNTERWEIGHT Parts scheme

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[3]	STRAP-CABLE
2.	7K-1181 C	[1]	STRAP-CABLE
3.	132-1854	[1]	BRACKET
4.	350-8070 C	[1]	HARNESS AS-SOLENOID (COUNTERWEIGHT REMOVAL SYSTEM)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
	9W-0852	[3]	PIN-CONNECTOR (14-GA TO 16-GA)
	9W-0844	[2]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	5P-2321	[3]	TERMINAL-FORK (14-GA TO 16-GA, NO. 6 SCREW)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	243-4508	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
	5P-3059	[2]	TERMINAL-FORK (18-GA TO 22-GA, NO. 6 SCREW)
5.	114-0421	[1]	SWITCH AS-TOGGLE (COUNTERWEIGHT REMOVAL)
	3L-8187	[12]	LOCKWASHER
	6T-3631	[2]	NUT-HEX (15/32-32-THD)
	6T-3632	[1]	LOCKWASHER
	6T-3633	[1]	RING-LOCKING
	6V-8374	[12]	SCREW-MACHINE (6-32X0.25-IN)
6.	6V-9673 M	[2]	SCREW-MACHINE (M5X0.8X12-MM)
7.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP56620337

219-7462: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

219-7462 WIRING GP-ELECTRONIC CONTROL
S/N MHX7634-UP
PART OF 291-9259 ENGINE AR-COMPLETE

i02068599 SEBP5662

2197462 WIRING GP-ELECTRONIC CONTROL Parts scheme

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[15]	STRAP-CABLE
3.	9X-2097 M	[1]	STUD (M8X1.25-THD)
4.	206-2423	[1]	SADDLE-MOUNTING
5.	219-7461	[1]	HARNESS AS-CONTROL (ELECTRONIC CONTROL MODULE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[2]	KIT-RECEPTACLE (3-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[2]	STRAP-CABLE
	8T-8737	[81]	PLUG-SEAL
	105-1797	[1]	MOUNT
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	194-5226	[62]	WIRE AS (16-GA)
			-OR-
	194-5227	[62]	WIRE AS (14-GA)
	9X-3401	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[6]	PIN-CONNECTOR (14-GA TO 16-GA)
	211-6807	[1]	COVER-CONNECTOR
	264-5732	[1]	PLUG AS-CONNECTOR (120-PIN)
	288-7324	[1]	SEAL-CONNECTOR
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)
6.	303-5952	[1]	STRAP-CABLE
7.	132-5789	[2]	CLIP (LADDER)
8.	156-6175	[2]	CLIP (LADDER)
10.	2Y-5829 M	[1]	NUT (M10X1.5-THD)
11.	4P-7581	[3]	CLIP (LADDER)
12.	5P-9085	[1]	CLIP (LOOP)
13.	6V-3918 M	[1]	BOLT (M8X1.25X50-MM)
14.	6V-5839	[5]	WASHER (11X21X2.5-MM THK)
15.	6V-8212 M	[4]	BOLT (M10X1.5X16-MM)
16.	6V-8836 M	[2]	BOLT (M6X1X14-MM)
19.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
20.	9X-8267	[2]	WASHER (6.6X12X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP56620338

354-0045: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

354-0045 WIRING GP-ELECTRONIC CONTROL
S/N TXF1-4789; MHX10094-12108
PART OF 291-9259 ENGINE AR-COMPLETE
FOR USE WITH @@@@@354-0042@@@@@

i03957677 SEBP5662

3540045 WIRING GP-ELECTRONIC CONTROL Parts scheme

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[13]	STRAP-CABLE
2.	5P-9085	[1]	CLIP (LOOP)
3.	354-0048 Y	[1]	HARNESS AS-ENGINE
4.	132-5789	[3]	CLIP (LADDER)
5.	156-6175	[2]	CLIP (LADDER)
6.	2Y-5829 M	[2]	NUT (M10X1.5-THD)
7.	4P-7581	[4]	CLIP (LADDER)
8.	6V-3918 M	[1]	BOLT (M8X1.25X50-MM)
9.	6V-5839	[6]	WASHER (11X21X2.5-MM THK)
10.	6V-8212 M	[4]	BOLT (M10X1.5X16-MM)
11.	6V-8836 M	[2]	BOLT (M6X1X14-MM)
12.	9X-8267	[2]	WASHER (6.6X12X2-MM THK)
13.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
14.	9X-2097 M	[1]	STUD (M8X1.25-THD)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP56620339

354-0045: WIRING GP-ELECTRONIC CONTROL

WIRING GP-ELECTRONIC CONTROL

354-0045 WIRING GP-ELECTRONIC CONTROL
S/N TXF4790-8664
PART OF 291-9259, 424-8407 ENGINE AR-COMPLETE
FOR USE WITH @@@@@354-0042@@@@@

i05397012 SEBP5662

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[14]	STRAP-CABLE
2.	5P-9085	[1]	CLIP (LOOP)
3.	385-2664 CY	[1]	HARNESS AS-ENGINE
4.	132-5789	[3]	CLIP (LADDER)
5.	156-6175	[2]	CLIP (LADDER)
6.	2Y-5829 M	[2]	NUT (M10X1.5-THD)
7.	4P-7581 C	[3]	CLIP (LADDER)
8.	6V-3918 M	[1]	BOLT (M8X1.25X50-MM)
9.	6V-5839 C	[7]	WASHER (11X21X2.5-MM THK)
10.	6V-8212 CM	[5]	BOLT (M10X1.5X16-MM)
11.	6V-8836 M	[2]	BOLT (M6X1X14-MM)
12.	9X-8267	[2]	WASHER (6.6X12X2-MM THK)
13.	9M-1974	[2]	WASHER-HARD (8.8X16X2-MM THK)
14.	9X-2097 M	[1]	STUD (M8X1.25-THD)
15.	352-3970 C	[1]	CLIP (LADDER)
16.	4P-8134 C	[1]	CLIP (LADDER)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Operation and Maintenance Manual

Battery Disconnect Switch
345D and 349D Excavators

Battery or Battery Cable - Inspect/Replace
345D and 349D Excavators

Battery - Recycle
345D and 349D Excavators

SmartBoom Operation - If Equipped
345D and 349D Excavators

SmartBoom Control - If Equipped
345D and 349D Excavators

Power Receptacle - If Equipped
345D and 349D Excavators

Camera Harness - Disconnect and Connect
345D and 349D Excavators

Fuses - Replace
345D and 349D Excavators

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for the 291-7757 Platform Wiring Gp {1408}
Installation Procedure for the 291-7757 Platform Wiring Gp {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}

Installation of the 291-7758 Medium Pressure Wiring {1408}
Installation of the 291-7758 Medium Pressure Wiring {1408}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Installation Procedure of 259-4889 Chassis Wiring Gp on Certain Hydraulic Excavators{1408}
Installation Procedure of 259-4889 Chassis Wiring Gp on Certain Hydraulic Excavators{1408}

Installation Procedure for 336-6188 Quick Coupler Wiring Gp for Certain Hydraulic Excavators{1408}
Installation Procedure for 336-6188 Quick Coupler Wiring Gp for Certain Hydraulic Excavators{1408}

Installation Procedure for the <NOBR>456-4107</NOBR> Coupler Control Ar on Certain Hydraulic Excavators {1408, 5057, 7301, 7405, 7557}
Installation Procedure for the 456-4107 Coupler Control Ar on Certain Hydraulic Excavators {1408, 5057, 7301, 7405, 7557}

Installation Procedure for the 460-5489 Coupler Control Arrangement for Certain and Hydraulic Excavators{1408, 5057, 7332, 7405, 7557}
Installation Procedure for the 460-5489 Coupler Control Arrangement for Certain and Hydraulic Excavators{1408, 5057, 7332, 7405, 7557}

Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}

Specifications

Electronic Unit Injector Wiring
C11 and C13 Engines

Tool Operating Manual

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Relays
345D, 349D and 349D2 Excavators Tool Control System

Senders
345D, 349D and 349D2 Excavators Tool Control System

Sensors
345D, 349D and 349D2 Excavators Tool Control System

Switches
345D, 349D and 349D2 Excavators Tool Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Sensors
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Switches
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C11 and C13 Engines for Caterpillar Built Machines

Wiring Harness (Open Circuit) - Test
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Overload Warning - Set - If Equipped
345D, 349D and 349D2 Excavators Hydraulic System

System Schematic
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electrical Connector - Inspect
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

System Schematic
Machine Security System (MSS3i) Integrated

Troubleshooting

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
C11 and C13 Engines for Caterpillar Built Machines

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
C11 and C13 Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
C11 and C13 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C11 and C13 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C11 and C13 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C11 and C13 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C11 and C13 Engines for Caterpillar Built Machines

Low Engine Oil Pressure Lamp Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C11 and C13 Engines for Caterpillar Built Machines

CID 0190 FMI 08 Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 05
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 05
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2280 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electrical Component and Connector Locations
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

A New Console Harness Assembly Is Available for Certain Excavators {1408}
2012/11/01

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

The Correct Orientation of the Atmospheric Sensor Must Be Maintained on Certain Tier 3 Machine Engines {1923}
The Correct Orientation of the Atmospheric Sensor Must Be Maintained on Certain Tier 3 Machine Engines {1923}

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

The Control Panel Assembly has been Improved for Certain 311D to 349D Excavators {1408, 7301}
2014/03/27

A New Special Instruction is Available for Troubleshooting the Upper Window Wiper Relay Circuit on Certain 311D-349D, E Series, and F Series Excavators {1408, 7305}
2015/08/07

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}