299-2604 WIRING GP-QUICK COUPLER S/N JGB1-UP; KHS1-UP PART OF 302-9403 CONTROL AR-COUPLER AN ATTACHMENT 349D L

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 299-2604 WIRING GP-
1. 283-2913 WIRING GP-
2. 230-0961 WIRING GP-

POWER TRAIN

DRIVE GP-FINAL

3. 227-6044 DRIVE GP-F
4. 227-6045 DRIVE GP-F
5. 333-3036 DRIVE GP-F
6. 353-0500 DRIVE GP-F
7. 353-0527 DRIVE GP-F
8. 353-0528 DRIVE GP-F

POWER TRAIN AR

9. 227-6042 POWER TRAI
0. INFORMATION

EXCAVATOR 349D L EXCAVATOR JGB
349D L Excavators JGB00001-UP (MACHINE) POWERED BY C13 Engine SEBP5662 349D L JGB (2011)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

291-7757 WIRING GP-PLATFORM

291-7768 WIRING GP-PLATFORM

299-2604 WIRING GP-QUICK COUPLER

283-2913 WIRING GP-RADIO

230-0961 WIRING GP-UNIT INJECTOR

303-2702 INSTALLATION AR-RADIO

#SEBP56620350

299-2604: WIRING GP-QUICK COUPLER

WIRING GP-QUICK COUPLER

299-2604 WIRING GP-QUICK COUPLER
S/N JGB1-UP; KHS1-UP
PART OF 302-9403 CONTROL AR-COUPLER
AN ATTACHMENT

i02903632 SEBP5662

2992604 WIRING GP-QUICK COUPLER Parts scheme

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[6]	STRAP-CABLE
2.	7I-2673	[1]	STRAP-CABLE
3.	7K-1181	[23]	STRAP-CABLE
4.	299-2643	[1]	HARNESS AS-SOLENOID
5.	4P-7428	[1]	CLIP (LADDER)
6.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
7.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
	M		METRIC PART

#SEBP56620351

283-2913: WIRING GP-RADIO

WIRING GP-RADIO

283-2913 WIRING GP-RADIO
S/N JGB1-UP; KHS1-UP
12-VOLT
PART OF 371-9200, 371-9201, 371-9205, 371-9206, 391-8961, 391-8962, 391-8964, 391-8965 DISTRIBUTION AR
CANNOT BE USED WITH @@@@@251-0538@@@@@, @@@@@303-2702@@@@@, @@@@@302-9403@@@@@
AN ATTACHMENT

i02724420 SEBP5662

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[11]	STRAP-CABLE
2.	4I-7889	[1]	SPACER (11X25X45-MM THK)
3.	7K-1181	[10]	STRAP-CABLE
4.	116-0118	[1]	CLIP
5.	149-5050	[4]	RELAY (24-VOLT)(SPEAKERS)
6.	170-2512 Y	[1]	SWITCH GP-TOGGLE (12-VOLT, 24-VOLT SPEAKER)
7.	267-7676	[1]	BRACKET AS
8.	267-7695	[1]	BRACKET AS
9.	283-2914	[1]	HARNESS AS-RADIO
	8T-8737	[9]	PLUG-SEAL
	8T-8730	[21]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9W-0844	[6]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	149-5069	[8]	TERMINAL-BLADE (14-GA TO 20-GA)
	149-5070	[12]	TERMINAL-BLADE (16-GA TO 20-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	8T-8729	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	9W-0852	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	3S-2093	[25]	STRAP-CABLE
	149-5051	[4]	CONNECTOR-RECEPTACLE
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	231-2295	[2]	PLUG AS-CONNECTOR (8-PIN)
			(EACH INCLUDES)
	264-7033	[1]	SEAL-CONNECTOR
	243-4509	[2]	RECEPTACLE AS-CONNECTOR (8-PIN)
10.	283-2984	[1]	COVER
11.	324-5770	[1]	CONVERTER-POWER (24-VOLT TO 12-VOLT)
12.	8T-4171 M	[4]	BOLT (M6X1X12-MM)
13.	8T-5005 M	[1]	BOLT (M10X1.5X70-MM)
14.	9X-2042 M	[7]	SCREW-TRUSS HEAD (M6X1X12-MM)
15.	9X-8256	[4]	WASHER (6.6X12X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP56620352

230-0961: WIRING GP-UNIT INJECTOR

WIRING GP-UNIT INJECTOR

230-0961 WIRING GP-UNIT INJECTOR
S/N TXF1-UP; MHX7634-UP
PART OF 317-9990, 356-2433 ENGINE AR-CORE

i02056539 SEBP5662

2300961 WIRING GP-UNIT INJECTOR Parts scheme

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7E-6508	[6]	CAP AS
2.	418-7614 Y	[1]	HARNESS AS-WIRING (UNIT INJECTOR)
3.	6V-8837 M	[5]	BOLT (M6X1X16-MM)
4.	6V-8836 M	[2]	BOLT (M6X1X14-MM)
5.	9X-8267	[2]	WASHER (6.6X12X2-MM THK)
6.	237-9960	[5]	CLIP (LADDER)
7.	3S-2093	[5]	STRAP-CABLE
8.	5P-0537	[5]	WASHER-HARD (7.2X14.5X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP56620353

227-6044: DRIVE GP-FINAL

DRIVE GP-FINAL

227-6044 DRIVE GP-FINAL -WITH MOTOR
S/N JGB1-522; KHS1-124
PART OF 353-0500 DRIVE GP-FINAL

i02488618 SEBP5662

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	225-4504 CY	[1]	MOTOR & MTG GP-TRAVEL
2.	227-6045 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP56620354

227-6045: DRIVE GP-FINAL

DRIVE GP-FINAL

227-6045 DRIVE GP-FINAL -WITHOUT MOTOR
S/N JGB1-522; KHS1-124
PART OF 227-6044 DRIVE GP-FINAL

i02161077 SEBP5662

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2R-0524	[2]	CONE-BEARING
2.	2R-0525	[2]	CUP-BEARING
3.	4I-7576	[14]	WASHER (66.3X104X3-MM THK)
4.	7M-8485	[2]	SEAL-O-RING
5.	7Y-0661	[3]	SHAFT-PLANETARY
6.	7Y-0662	[4]	SHAFT-PLANETARY
7.	199-4583	[11]	BEARING AS
8.	7Y-0808 B	[1]	SHIM (1.6-MM THK)
9.	7Y-1469	[1]	COUPLING
10.	7Y-1470	[1]	GEAR-SUN (21-TEETH)
11.	7Y-1472 B	[1]	SHIM (0.15-MM THK)
12.	7Y-1473 B	[1]	SHIM (0.3-MM THK)
13.	7Y-1474 B	[1]	SHIM (0.4-MM THK)
14.	7Y-1475 B	[1]	SHIM (0.5-MM THK)
15.	7Y-1476 B	[1]	SHIM (0.6-MM THK)
16.	7Y-1477 B	[1]	SHIM (0.7-MM THK)
17.	7Y-1478 B	[1]	SHIM (0.8-MM THK)
18.	7Y-1479 B	[1]	SHIM (1-MM THK)
19.	7Y-1480 B	[1]	SHIM (1.6-MM THK)
20.	7Y-1482	[1]	CARRIER-PLANETARY
21.	7Y-1483	[1]	GEAR-RING (63-TEETH)
22.	7Y-1485	[1]	CARRIER-PLANETARY
23.	7Y-1487	[1]	GEAR-RING (85-TEETH)
24.	7Y-1488	[1]	CARRIER AS
	7Y-0656	[3]	SHAFT-PLANETARY
25.	7Y-1491	[1]	GEAR-SUN (21-TEETH)
26.	7Y-1493	[1]	SPACER (8.7X50X14-MM THK)
27.	7Y-1495	[3]	GEAR-PLANETARY (29-TEETH)
28.	7Y-1498	[1]	COVER
29.	7Y-1499	[3]	GEAR-PLANETARY (20-TEETH)
30.	7Y-1504	[4]	GEAR-PLANETARY (20-TEETH)
31.	7Y-5235 M	[20]	BOLT (M24X3X190-MM)
32.	110-7217	[2]	RING-RETAINING
33.	114-1541	[6]	PIN-DOWEL
34.	169-5559	[1]	GEAR-SUN (26-TEETH)
35.	199-4719	[1]	GEAR-COUPLING
36.	200-3489	[1]	HOUSING-MOTOR
37.	200-3490	[1]	HOUSING-GEAR
38.	205-9025	[1]	SEAL GP-DUO-CONE
	205-9024	[2]	RING-TORIC
39.	227-6048	[12]	WASHER (26X40X4-MM THK)
40.	094-0584	[6]	WASHER (40.3X72X1-MM THK)
41.	199-4582	[3]	BEARING AS
42.	095-0891	[7]	PIN-SPRING
43.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
44.	3E-2338	[2]	PLUG-PIPE (FINAL DRIVE, OIL DRAIN, FILL)
45.	6V-8133 M	[12]	BOLT (M24X3X80-MM)
46.	7Y-1484	[1]	SPACER (191X221X8.5-MM THK)
47.	7Y-1492	[2]	SPACER (67X101.1X10-MM THK)
48.	8C-5240	[1]	SEAL-O-RING
49.	8T-3957 M	[10]	BOLT-SOCKET HEAD (M12X1.75X30-MM)
50.	8T-4167	[20]	WASHER-HARD (26X44X4-MM THK)
51.	8T-4240	[3]	RING-RETAINING
52.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP56620355

333-3036: DRIVE GP-FINAL

DRIVE GP-FINAL

333-3036 DRIVE GP-FINAL -WITHOUT MOTOR
S/N JGB523-UP; KHS125-UP
PART OF 353-0528 DRIVE GP-FINAL

i04045611 SEBP5662

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2R-0524	[2]	CONE-BEARING
2.	2R-0525	[2]	CUP-BEARING
3.	3E-2338	[2]	PLUG-PIPE
4.	4I-7576	[14]	WASHER (66.3X104X3-MM THK)
5.	7Y-0661	[3]	SHAFT-PLANETARY
6.	7Y-0662	[4]	SHAFT-PLANETARY
7.	199-4583	[11]	BEARING AS
8.	7Y-0808 B	[1]	SHIM (1.6-MM THK)
9.	7Y-1469	[1]	COUPLING
10.	7Y-1470	[1]	GEAR-SUN (21-TEETH)
11.	7Y-1472 B	[1]	SHIM (0.15-MM THK)
	7Y-1473 B	[1]	SHIM (0.3-MM THK)
	7Y-1474 B	[1]	SHIM (0.4-MM THK)
	7Y-1475 B	[1]	SHIM (0.5-MM THK)
	7Y-1476 B	[1]	SHIM (0.6-MM THK)
	7Y-1477 B	[1]	SHIM (0.7-MM THK)
	7Y-1478 B	[1]	SHIM (0.8-MM THK)
	7Y-1479 B	[1]	SHIM (1-MM THK)
	7Y-1480 B	[1]	SHIM (1.6-MM THK)
20.	7Y-1482	[1]	CARRIER-PLANETARY
21.	7Y-1483	[1]	GEAR-RING (63-TEETH)
22.	7Y-1485	[1]	CARRIER-PLANETARY
23.	7Y-1487	[1]	GEAR-RING (85-TEETH)
24.	7Y-1488	[1]	CARRIER AS
	7Y-0656	[3]	SHAFT-PLANETARY
25.	7Y-1491	[1]	GEAR-SUN (21-TEETH)
26.	7Y-1493	[1]	SPACER (8.7X50X14-MM THK)
27.	7Y-1495	[3]	GEAR-PLANETARY (29-TEETH)
28.	7Y-1498	[1]	COVER
29.	7Y-1499	[3]	GEAR-PLANETARY (20-TEETH)
30.	7Y-1504	[4]	GEAR-PLANETARY (20-TEETH)
31.	454-6929 M	[20]	BOLT (M24X3X190-MM)
32.	110-7217	[2]	RING-RETAINING
33.	114-1541	[6]	PIN-DOWEL
34.	169-5559	[1]	GEAR-SUN (26-TEETH)
35.	199-4719	[1]	GEAR-COUPLING
36.	227-6048	[12]	WASHER (26X40X4-MM THK)
37.	255-2272	[1]	SEAL GP-DUO-CONE
38.	333-3033	[1]	HOUSING-MOTOR
39.	333-3034	[1]	HOUSING-GEAR
40.	333-3035	[1]	PLATE
41.	094-0584	[6]	WASHER (40.3X72X1-MM THK)
42.	199-4582	[3]	BEARING AS
43.	095-0891	[7]	PIN-SPRING
44.	096-3216 M	[2]	SETSCREW-SOCKET (M12X1.75X12-MM)
45.	4S-5924	[1]	SEAL-O-RING
46.	6V-8133 M	[12]	BOLT (M24X3X80-MM)
47.	6V-8200 M	[20]	BOLT-SOCKET HEAD (M12X1.75X35-MM)
48.	7M-8485	[2]	SEAL-O-RING
49.	7Y-1484	[1]	SPACER (191X221X8.5-MM THK)
50.	7Y-1492	[2]	SPACER (67X101.1X10-MM THK)
51.	8C-5240	[1]	SEAL-O-RING
52.	8T-3957 M	[10]	BOLT-SOCKET HEAD (M12X1.75X30-MM)
53.	451-2177	[20]	WASHER-HARD (26X44X4-MM THK)
54.	451-2182	[20]	WASHER-HARD (13.5X25.5X3-MM THK)
55.	8T-4240	[3]	RING-RETAINING

	1U-8846 BF		SEALANT-GASKET
	B		USE AS REQUIRED
	F		NOT SHOWN
	M		METRIC PART

#SEBP56620356

353-0500: DRIVE GP-FINAL

DRIVE GP-FINAL

353-0500 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N JGB1-522; KHS1-124
PART OF 227-6042, 227-6043 POWER TRAIN AR

i03933189 SEBP5662

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	115-6399 Y	[1]	SPROCKET GP (NON-SEGMENTED)
2.	227-6044 Y	[1]	DRIVE GP-FINAL (WITH MOTOR)
	Y		SEPARATE ILLUSTRATION

#SEBP56620357

353-0527: DRIVE GP-FINAL

DRIVE GP-FINAL

353-0527 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N JGB523-UP; KHS125-UP
PART OF 227-6042, 227-6043 POWER TRAIN AR

i04045614 SEBP5662

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	115-6399 Y	[1]	SPROCKET GP (NON-SEGMENTED)
2.	353-0528 Y	[1]	DRIVE GP-FINAL
	Y		SEPARATE ILLUSTRATION

#SEBP56620358

353-0528: DRIVE GP-FINAL

DRIVE GP-FINAL

353-0528 DRIVE GP-FINAL -WITH MOTOR
S/N JGB523-UP; KHS125-UP
PART OF 353-0527 DRIVE GP-FINAL

i04045608 SEBP5662

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	225-4504 Y	[1]	MOTOR & MTG GP-TRAVEL
2.	333-3036 Y	[1]	DRIVE GP-FINAL (WITHOUT MOTOR)
	Y		SEPARATE ILLUSTRATION

#SEBP56620359

227-6042: POWER TRAIN AR

POWER TRAIN AR

227-6042 POWER TRAIN AR
S/N JGB1-UP
PART OF 370-3230 GENERAL AR

i04893918 SEBP5662

For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
296-6252 Y	[1]	DRIVE GP-SWING (WITH MOTOR, LH)
296-6249 Y	[1]	DRIVE GP-SWING (WITH MOTOR, RH)
227-6050 Y	[1]	FASTENER GP-SWING & FINAL DR
353-0500 Y	[2]	DRIVE GP-FINAL (WITH MOTOR, SPROCKET)
		S/N JGB1-522
353-0527 Y	[2]	DRIVE GP-FINAL (WITH MOTOR, SPROCKET)
		S/N JGB523-UP
Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Operation and Maintenance Manual

Battery Disconnect Switch
345D and 349D Excavators

Battery or Battery Cable - Inspect/Replace
345D and 349D Excavators

Battery - Recycle
345D and 349D Excavators

SmartBoom Operation - If Equipped
345D and 349D Excavators

SmartBoom Control - If Equipped
345D and 349D Excavators

Power Receptacle - If Equipped
345D and 349D Excavators

Camera Harness - Disconnect and Connect
345D and 349D Excavators

Fuses - Replace
345D and 349D Excavators

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}
Troubleshooting Guide for 161-3128 Relay on Certain Excavators{1408, 7301}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for the 291-7757 Platform Wiring Gp {1408}
Installation Procedure for the 291-7757 Platform Wiring Gp {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}

Installation of the 291-7758 Medium Pressure Wiring {1408}
Installation of the 291-7758 Medium Pressure Wiring {1408}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Installation Procedure of 259-4889 Chassis Wiring Gp on Certain Hydraulic Excavators{1408}
Installation Procedure of 259-4889 Chassis Wiring Gp on Certain Hydraulic Excavators{1408}

Installation Procedure for 336-6188 Quick Coupler Wiring Gp for Certain Hydraulic Excavators{1408}
Installation Procedure for 336-6188 Quick Coupler Wiring Gp for Certain Hydraulic Excavators{1408}

Installation Procedure for the <NOBR>456-4107</NOBR> Coupler Control Ar on Certain Hydraulic Excavators {1408, 5057, 7301, 7405, 7557}
Installation Procedure for the 456-4107 Coupler Control Ar on Certain Hydraulic Excavators {1408, 5057, 7301, 7405, 7557}

Installation Procedure for the 460-5489 Coupler Control Arrangement for Certain and Hydraulic Excavators{1408, 5057, 7332, 7405, 7557}
Installation Procedure for the 460-5489 Coupler Control Arrangement for Certain and Hydraulic Excavators{1408, 5057, 7332, 7405, 7557}

Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}

Specifications

Electronic Unit Injector Wiring
C11 and C13 Engines

Tool Operating Manual

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Systems Operation

Relays
345D, 349D and 349D2 Excavators Tool Control System

Senders
345D, 349D and 349D2 Excavators Tool Control System

Sensors
345D, 349D and 349D2 Excavators Tool Control System

Switches
345D, 349D and 349D2 Excavators Tool Control System

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines

Sensors
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Switches
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Testing and Adjusting

Electric Starting System - Test
C11 and C13 Engines for Caterpillar Built Machines

Wiring Harness (Open Circuit) - Test
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Overload Warning - Set - If Equipped
345D, 349D and 349D2 Excavators Hydraulic System

System Schematic
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electrical Connector - Inspect
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

System Schematic
Machine Security System (MSS3i) Integrated

Troubleshooting

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
C11 and C13 Engines for Caterpillar Built Machines

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
C11 and C13 Engines for Caterpillar Built Machines

Electrical Connectors - Inspect
C11 and C13 Engines for Caterpillar Built Machines

CID 0091 FMI 08 Throttle Position signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0274 FMI 04 Atmospheric Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

Fuel Filter Differential Pressure Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 0174 FMI 03 Fuel Temperature open/short to +batt
C11 and C13 Engines for Caterpillar Built Machines

CID 0174 FMI 04 Fuel Temperature short to ground
C11 and C13 Engines for Caterpillar Built Machines

CID 2417 FMI 05 Ether Injection Control Solenoid current low
C11 and C13 Engines for Caterpillar Built Machines

CID 2417 FMI 06 Ether Injection Control Solenoid current high
C11 and C13 Engines for Caterpillar Built Machines

Sensors and Electrical Connectors
C11 and C13 Engines for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

Throttle Switch Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C11 and C13 Engines for Caterpillar Built Machines

Low Engine Oil Pressure Lamp Circuit - Test
C11 and C13 Engines for Caterpillar Built Machines

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C11 and C13 Engines for Caterpillar Built Machines

CID 0190 FMI 08 Engine Speed signal abnormal
C11 and C13 Engines for Caterpillar Built Machines

MID 039 - CID 0096 - FMI 05
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0110 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 05
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0586 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 1178 - FMI 08
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 2280 - FMI 03
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Electrical Component and Connector Locations
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 12
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0588 - FMI 09
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

MID 039 - CID 0600 - FMI 04
345D, 349D and 349D2 Excavators and 345D MHPU, 349D MHPU and 349D2 MHPU Mobile Hydraulic Power Units Machine Electronic Control System

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08

A New Console Harness Assembly Is Available for Certain Excavators {1408}
2012/11/01

Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

The Correct Orientation of the Atmospheric Sensor Must Be Maintained on Certain Tier 3 Machine Engines {1923}
The Correct Orientation of the Atmospheric Sensor Must Be Maintained on Certain Tier 3 Machine Engines {1923}

Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04

The Control Panel Assembly has been Improved for Certain 311D to 349D Excavators {1408, 7301}
2014/03/27

A New Special Instruction is Available for Troubleshooting the Upper Window Wiper Relay Circuit on Certain 311D-349D, E Series, and F Series Excavators {1408, 7305}
2015/08/07

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}