AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

337-1529 FRAME GP-UPPER S/N WTD1-143 PART OF 359-2579 CHASSIS AR 349D L EXCAVATOR


FRAME AND BODY
FRAME GP
GEAR & BEARING GP
GUARD GP

EXCAVATOR 349D L EXCAVATOR WTD
 349D L Excavator WTD00001-UP (MACHINE) POWERED BY C13 Engine SEBP5663 349D L WTD   (2011)

FRAME AND BODY

FRAME GP
FRAME GP-UPPER
337-1529 FRAME GP-UPPER
FRAME GP-UPPER
337-1618 FRAME GP-UPPER
FRAME GP-UPPER
344-6835 FRAME GP-UPPER
FRAME GP-UPPER
376-4596 FRAME GP-UPPER
FRAME GP-UPPER
384-2949 FRAME GP-UPPER
 

#SEBP56630430
 

337-1529: FRAME GP-UPPER

337-1529 FRAME GP-UPPER
S/N WTD1-143
PART OF 359-2579 CHASSIS AR
i04415232 SEBP5663
3371529 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-0575 B [4] SHIM (1-MM THK)  
2. 4I-0577 B [2] SHIM (2-MM THK)  
3. 4I-4996 [2] PIN AS  
4. 133-2428 B [2] SHIM (0.5-MM THK)  
5. 201-2771 [3] WASHER (26X90X8-MM THK)  
6. 234-3942 [1] PIN AS  
7. 308-8772 B [1] SHIM (0.5-MM THK)  
8. 308-8773 B [2] SHIM (1-MM THK)  
9. 308-8774 B [1] SHIM (2-MM THK)  
10. 365-7063 C [1] FRAME AS-UPPER  
10A. 7Y-1113 [1] BOSS  
10B. 248-1768 [1] STEP AS  
11. 4I-1129 [2] SPACER (113X150X14-MM THK)  
12. 7X-2573 M [3] BOLT (M24X3X40-MM)  
13. 8T-4167 [3] WASHER-HARD (26X44X4-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP56630431
 

337-1618: FRAME GP-UPPER

337-1618 FRAME GP-UPPER
S/N WTD1-UP
PART OF 340-3894 COUNTERWEIGHT AR
AN ATTACHMENT
i04371552 SEBP5663
3371618 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-0575 B [4] SHIM (1-MM THK)  
2. 4I-0577 B [2] SHIM (2-MM THK)  
3. 4I-2509 [2] PLATE-END  
4. 4I-4996 [2] PIN AS  
5. 126-6367 [2] SUPPORT  
6. 133-2428 B [2] SHIM (0.5-MM THK)  
7. 201-2771 [3] WASHER (26X90X8-MM THK)  
8. 234-3942 [1] PIN AS  
9. 308-8772 B [1] SHIM (0.5-MM THK)  
10. 308-8773 B [2] SHIM (1-MM THK)  
11. 308-8774 B [1] SHIM (2-MM THK)  
12. 365-7065 C [1] FRAME AS-UPPER  
12A. 7Y-1113 [1] BOSS  
12B. 248-1768 [1] STEP AS  
13. 4I-1129 [2] SPACER (113X150X14-MM THK)  
14. 5P-1076 [8] WASHER-HARD (13.5X30X4-MM THK)  
15. 453-2852 M [3] BOLT (M24X3X40-MM)  
16. 451-2177 [3] WASHER-HARD (26X44X4-MM THK)  
17. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
   
    THE FOLLOWING REPAIR PARTS ARE AVAILABLE FOR REPAIR OF DAMAGED SKIRTS
  178-0852 F [1] PLATE-SKIRT (1100-MM)  
  184-5724 F [1] PLATE-SKIRT (2000-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP56630432
 

344-6835: FRAME GP-UPPER

344-6835 FRAME GP-UPPER -ACCUGRADE
S/N WTD1-UP
PART OF 346-4605 SPECIAL AR
AN ATTACHMENT
i04292809 SEBP5663
3446835 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-0575 B [4] SHIM (1-MM THK)  
2. 4I-0577 B [2] SHIM (2-MM THK)  
3. 4I-4996 [2] PIN AS  
4. 133-2428 B [2] SHIM (0.5-MM THK)  
5. 201-2771 [2] WASHER (26X90X8-MM THK)  
6. 308-8772 B [1] SHIM (0.5-MM THK)  
7. 308-8773 B [2] SHIM (1-MM THK)  
8. 308-8774 B [1] SHIM (2-MM THK)  
9. 308-8947 [1] PIN AS  
10. 350-6445 C [1] PLATE  
11. 308-8953 [1] PLATE  
12. 337-1530 [1] FRAME AS-UPPER  
12A. 7Y-1113 [1] BOSS  
12B. 248-1768 [1] STEP AS  
13. 096-4885 M [2] LOCKNUT (M16X2-THD)  
14. 4I-1129 [2] SPACER (113X150X14-MM THK)  
15. 5A-3604 M [4] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
16. 7X-2573 M [2] BOLT (M24X3X40-MM)  
17. 8T-4140 M [2] BOLT (M16X2X60-MM)  
18. 8T-4167 [3] WASHER-HARD (26X44X4-MM THK)  
19. 7X-2575 CM [1] BOLT (M24X3X60-MM)  
20. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
   
    THE FOLLOWING REPAIR PARTS ARE AVAILABLE FOR REPAIR OF DAMAGED SKIRTS
  178-0852 F [1] PLATE-SKIRT (1100-MM)  
  184-5724 F [1] PLATE-SKIRT (2000-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP56630433
 

376-4596: FRAME GP-UPPER

376-4596 FRAME GP-UPPER
S/N WTD144-UP
PART OF 359-2579 CHASSIS AR
i05052550 SEBP5663
3764596 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-0575 B [4] SHIM (1-MM THK)  
2. 4I-0577 B [2] SHIM (2-MM THK)  
3. 4I-4996 [2] PIN AS  
4. 133-2428 B [2] SHIM (0.5-MM THK)  
5. 201-2771 [3] WASHER (26X90X8-MM THK)  
6. 234-3942 [1] PIN AS  
7. 308-8772 B [1] SHIM (0.5-MM THK)  
8. 308-8773 B [2] SHIM (1-MM THK)  
9. 308-8774 B [1] SHIM (2-MM THK)  
10. 376-4591 [1] FRAME AS-UPPER  
10A. 7Y-1113 [1] BOSS  
10B. 248-1768 [1] STEP AS  
11. 4I-1129 [2] SPACER (113X150X14-MM THK)  
12. 453-2852 M [3] BOLT (M24X3X40-MM)  
13. 451-2177 [3] WASHER-HARD (26X44X4-MM THK)  
   
    THE FOLLOWING REPAIR PART(S) ARE AVAILABLE FOR REPAIR OF DAMAGED SKIRTS
  178-0852 F [1] PLATE-SKIRT (1100-MM)  
  184-5724 F [1] PLATE-SKIRT (2000-MM)  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP56630434
 

384-2949: FRAME GP-UPPER

384-2949 FRAME GP-UPPER -GRADE CONTROL
S/N WTD1-UP
PART OF 379-7187, 419-0558 SPECIAL AR
AN ATTACHMENT
i05030013 SEBP5663
3842949 FRAME GP-UPPER Parts scheme
  For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-0575 [4] SHIM (1-MM THK)  
2. 4I-0577 [2] SHIM (2-MM THK)  
3. 4I-4996 [2] PIN AS  
4. 133-2428 [2] SHIM (0.5-MM THK)  
5. 201-2771 [2] WASHER (26X90X8-MM THK)  
6. 308-8772 B [1] SHIM (0.5-MM THK)  
7. 308-8773 B [2] SHIM (1-MM THK)  
8. 308-8774 B [1] SHIM (2-MM THK)  
9. 308-8947 [1] PIN AS  
10. 350-6445 [1] PLATE  
11. 308-8953 [1] PLATE  
12. 376-4591 [1] FRAME AS-UPPER  
12A. 7Y-1113 [1] BOSS  
12B. 248-1768 [1] STEP AS  
13. 096-4885 M [2] LOCKNUT (M16X2-THD)  
14. 4I-1129 [2] SPACER (113X150X14-MM THK)  
15. 5A-3604 M [4] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
16. 453-2852 M [2] BOLT (M24X3X40-MM)  
17. 447-1707 M [2] BOLT (M16X2X60-MM)  
18. 451-2177 [3] WASHER-HARD (26X44X4-MM THK)  
19. 447-1722 M [1] BOLT (M24X3X60-MM)  
20. 451-2175 [2] WASHER-HARD (17.5X30X3.5-MM THK)  
   
    THE FOLLOWING REPAIR PARTS ARE AVAILABLE FOR REPAIR OF DAMAGED SKIRTS
  178-0852 F [1] PLATE-SKIRT (1100-MM)  
  184-5724 F [1] PLATE-SKIRT (2000-MM)  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP56630435
 

227-6036: GEAR & BEARING GP-SWING

227-6036 GEAR & BEARING GP-SWING
S/N WTD1-UP
PART OF 294-1316 FRAME AR-UNDERCARRIAGE
i04151931 SEBP5663
2276036 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-9243 [4] ELBOW-FLARED  
2. 6I-6441 [13] CORK  
3. 7Y-1647 [1] GASKET  
4. 7Y-1650 [1] CLAMP-HOSE  
5. 148-4573 [1] PLUG  
6. 353-0490 CY [1] GEAR & BEARING GP-SWING  
7. 333-3084 C [1] TUBE AS (RH)  
8. 333-3081 C [1] TUBE AS (LH)  
9. 227-6105 [1] BOOT  
10. 227-6106 [1] RETAINER  
11. 353-0518 C [54] SPACER (24.5X44X14-MM THK)  
12. 461-3887 M [70] BOLT (M24X3X140-MM)  
13. 461-3889 CM [54] BOLT (M24X3X160-MM)  
14. 148-4703 [1] COVER  
15. 148-4704 [1] GASKET  
16. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
17. 4N-9170 [4] CLIP (LOOP)  
18. 7Y-1095 [1] DOWEL  
19. 7Y-1507 [70] SPACER (24.5X44X43-MM THK)  
20. 7Y-1648 [1] STRIP  
21. 453-3454 [14] WASHER-HARD (11X21X2.5-MM THK)  
22. 455-3798 M [12] BOLT (M10X1.5X25-MM)  
23. 457-8759 M [2] BOLT (M10X1.5X20-MM)  
24. 8T-4199 M [4] BOLT (M8X1.25X12-MM)  
25. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56630436
 

353-0490: GEAR & BEARING GP-SWING

353-0490 GEAR & BEARING GP-SWING
S/N WTD1-UP
PART OF 227-6036 GEAR & BEARING GP-SWING
i04152138 SEBP5663
3530490 GEAR & BEARING GP-SWING Parts scheme
  For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 227-6075 [1] SEAL-DUST  
3. 148-4685 E SEAL (469-CM)  
4. 352-7064 [1] CAP  
  E   ORDER BY THE CENTIMETER
 

#SEBP56630437
 

340-3886: GUARD AR-BOTTOM

340-3886 GUARD AR-BOTTOM -HEAVY-DUTY
S/N WTD1-UP
AN ATTACHMENT
i03676481 SEBP5663
  For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  337-1071 Y [1] GUARD GP-BOTTOM (HEAVY-DUTY)  
  134-8893 Y [1] GUARD GP-SWIVEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP56630438
 

337-1069: GUARD GP-BOTTOM

337-1069 GUARD GP-BOTTOM
S/N WTD1-143
PART OF 359-2579 CHASSIS AR
i03679759 SEBP5663
3371069 GUARD GP-BOTTOM Parts scheme
  For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-8574 [44] BOLT AS  
2. 135-8576 [16] BOLT AS-LOCKING  
3. 140-1493 [1] SHEET  
4. 236-9206 [1] SHEET  
5. 248-9370 [1] SHEET  
6. 250-5284 [1] SHEET  
7. 250-5285 [1] SHEET  
8. 250-5286 [1] SHEET AS  
9. 262-2185 [1] SHEET AS  
10. 278-3707 [1] SHEET AS  
11. 307-7771 [1] SHEET AS  
12. 320-5477 [1] SHEET  
13. 342-1095 [1] SHEET  
14. 342-1097 [1] SHEET  
15. 2D-0388 [1] GROMMET (25.4-MM ID)  
16. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
17. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
  M   METRIC PART
 

#SEBP56630439
 

337-1069: GUARD GP-BOTTOM

337-1069 GUARD GP-BOTTOM
S/N WTD144-UP
PART OF 359-2579 CHASSIS AR
i04891670 SEBP5663
3371069 GUARD GP-BOTTOM Parts scheme
  For full view, you need register

Parts for your 349D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-8574 [44] BOLT AS  
2. 135-8576 [16] BOLT AS-LOCKING  
3. 140-1493 [1] SHEET  
4. 236-9206 [1] SHEET  
5. 248-9370 [1] SHEET  
6. 384-3985 C [1] SHEET  
7. 250-5285 [1] SHEET  
8. 250-5286 [1] SHEET AS  
9. 262-2185 [1] SHEET AS  
10. 278-3707 [1] SHEET AS  
11. 384-3986 C [1] SHEET AS  
12. 320-5477 [1] SHEET  
13. 342-1095 [1] SHEET  
14. 342-1097 [1] SHEET  
15. 2D-0388 [1] GROMMET (25.4-MM ID)  
16. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
17. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 349D L :

DOOR GP-ACCESS
366-6432 DOOR GP-ACCESS
DOOR AS-ACCESS
417-2023 DOOR AS-ACCESS
DOOR AS-ACCESS
366-6455 DOOR AS-ACCESS
DOOR AS-ACCESS
366-6454 DOOR AS-ACCESS
366-6453 DOOR AS-ACCESS
DOOR AS-ACCESS
351-2971 DOOR AS-ACCESS
COVER GP-HOOD
417-2027 COVER GP-HOOD
COVER GP-HOOD
351-3013 COVER GP-HOOD
FRAME GP-UPPER
337-1618 FRAME GP-UPPER
FRAME GP-UPPER
344-6835 FRAME GP-UPPER
FRAME GP-UPPER
376-4596 FRAME GP-UPPER
FRAME GP-UPPER
384-2949 FRAME GP-UPPER
GEAR & BEARING GP-SWING
227-6036 GEAR & BEARING GP-SWING
GEAR & BEARING GP-SWING
353-0490 GEAR & BEARING GP-SWING
340-3886 GUARD AR-BOTTOM
GUARD GP-BOTTOM
337-1069 GUARD GP-BOTTOM

Truck sale:

 
156,500 
Caterpillar 349DL, Construction
- Crawler Excavators
BANCO CATERPILLAR S.A.
Brazil
Caterpillar 349DL, Construction
390,000 
Caterpillar 349DL, Construction
- Crawler Excavators
EMPRESAS MATCO, S.A. DE C.V.
Mexico
Caterpillar 349DL, Construction
 
Caterpillar 349DL, Construction
- Crawler Excavators
FERREYROS S.A.
Peru
Caterpillar 349DL, Construction
267,583 
Caterpillar 349DL, Construction
- Crawler Excavators
J.A. DELMAS S.A.S.
Ivory Coast (Cote D'Ivoire)
Caterpillar 349DL, Construction
257,050 
Caterpillar 349DL, Construction
- Crawler Excavators
TRACTAFRIC EQUIPMENT
Netherlands
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.