ELECTRICAL AND STARTING SYSTEM
SENSOR GPELECTRICAL AND STARTING SYSTEM
SENSOR GP
#SEBP56680340
339-6972: SENSOR & MTG GP-SOOT
339-6972 SENSOR & MTG GP-SOOT
S/N SXE1-297; LAK1-162; AWS1-127; KLT1-154
PART OF 341-5350 INSTALLATION AR-CEM
S/N SXE1-297; LAK1-162; AWS1-127; KLT1-154
PART OF 341-5350 INSTALLATION AR-CEM
For full view, you need register
Parts for your 320E EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 326-4516 | [11] | TIE-CABLE | |
| 2. | 357-5353 Y | [1] | SENSOR GP-SOOT | |
| 3. | 132-5789 | [5] | CLIP (LADDER) | |
| 4. | 4P-7581 | [6] | CLIP (LADDER) | |
| 5. | 6V-7357 M | [2] | BOLT (M6X1X25-MM) | |
| 6. | 8T-4121 | [11] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4191 M | [11] | BOLT (M10X1.5X16-MM) | |
| 8. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56680341
339-6972: SENSOR & MTG GP-SOOT
339-6972 SENSOR & MTG GP-SOOT
S/N SXE298-1832; LAK163-279; AWS128-234; KLT155-174
PART OF 341-5350 INSTALLATION AR-CEM
S/N SXE298-1832; LAK163-279; AWS128-234; KLT155-174
PART OF 341-5350 INSTALLATION AR-CEM
For full view, you need register
Parts for your 320E EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 364-8013 CY | [1] | SENSOR GP-SOOT | |
| 2. | 132-5789 | [5] | CLIP (LADDER) | |
| 3. | 326-4516 | [11] | TIE-CABLE | |
| 4. | 4P-7581 | [6] | CLIP (LADDER) | |
| 5. | 6V-7357 M | [2] | BOLT (M6X1X25-MM) | |
| 6. | 8T-4121 | [11] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4136 M | [7] | BOLT (M10X1.5X25-MM) | |
| 8. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 9. | 8T-4191 M | [3] | BOLT (M10X1.5X16-MM) | |
| 10. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56680342
339-6972: SENSOR & MTG GP-SOOT
339-6972 SENSOR & MTG GP-SOOT
S/N SXE1833-2103; LAK280-291; AWS235-262; KLT175-178
PART OF 341-5350 INSTALLATION AR-CEM
S/N SXE1833-2103; LAK280-291; AWS235-262; KLT175-178
PART OF 341-5350 INSTALLATION AR-CEM
For full view, you need register
Parts for your 320E EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 390-2833 CY | [1] | SENSOR GP-SOOT | |
| 2. | 132-5789 | [5] | CLIP (LADDER) | |
| 3. | 326-4516 | [11] | TIE-CABLE | |
| 4. | 4P-7581 C | [5] | CLIP (LADDER) | |
| 5. | 6V-7357 M | [2] | BOLT (M6X1X25-MM) | |
| 6. | 8T-4121 | [11] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4136 M | [7] | BOLT (M10X1.5X25-MM) | |
| 8. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 9. | 8T-4191 M | [3] | BOLT (M10X1.5X16-MM) | |
| 10. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 11. | 4P-8134 C | [1] | CLIP (LADDER) | |
| 12. | 435-5273 C | [1] | HARNESS AS-SENSOR (DIESEL EXHAUST FLUID) | |
| 8T-8737 | [2] | PLUG-SEAL | ||
| 9X-3402 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 281-8811 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 281-8812 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56680343
339-6972: SENSOR & MTG GP-SOOT
339-6972 SENSOR & MTG GP-SOOT
S/N SXE2104-UP; LAK292-UP; AWS263-UP; KLT179-UP
PART OF 341-5350 INSTALLATION AR-CEM
S/N SXE2104-UP; LAK292-UP; AWS263-UP; KLT179-UP
PART OF 341-5350 INSTALLATION AR-CEM
For full view, you need register
Parts for your 320E EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 464-4913 CY | [1] | SENSOR GP-SOOT | |
| 2. | 132-5789 | [5] | CLIP (LADDER) | |
| 3. | 326-4516 | [11] | TIE-CABLE | |
| 4. | 4P-7581 | [5] | CLIP (LADDER) | |
| 5. | 6V-7357 M | [2] | BOLT (M6X1X25-MM) | |
| 6. | 8T-4121 | [11] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4136 M | [7] | BOLT (M10X1.5X25-MM) | |
| 8. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 9. | 8T-4191 M | [3] | BOLT (M10X1.5X16-MM) | |
| 10. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 11. | 4P-8134 | [1] | CLIP (LADDER) | |
| 12. | 464-8260 CY | [1] | HARNESS AS-MONITOR (EXHAUST) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56680344
351-8193: SENSOR GP-ENGINE
351-8193 SENSOR GP-ENGINE
S/N C8N1-UP
PART OF 345-2887, 465-1365 ENGINE AR-PRIMARY
Type 1
S/N C8N1-UP
PART OF 345-2887, 465-1365 ENGINE AR-PRIMARY
Type 1
For full view, you need register
Parts for your 320E EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 199-9252 | [3] | SEAL-O-RING | |
| 2. | 199-9267 | [4] | SEAL-O-RING | |
| 3. | 199-9751 | [1] | SEAL-O-RING | |
| 4. | 256-6454 | [1] | SENSOR-TEMPERATURE (2-PIN)(COOLANT TEMPERATURE) | |
| 4A. | 256-6454 | [1] | SENSOR-TEMPERATURE (2-PIN)(AIR INLET MANIFOLD) | |
| 5. | 276-5603 | [1] | SEAL-O-RING | |
| 6. | 320-3060 | [1] | SENSOR GP-PRESSURE (ENGINE OIL PRESSURE) | |
| 7. | 320-3061 | [1] | SENSOR GP-PRESSURE (NRS OUTLET) | |
| 7A. | 320-3061 | [1] | SENSOR GP-PRESSURE (NRS INLET) | |
| 8. | 320-3062 | [1] | SENSOR GP-PRESSURE (ARD COMBUSTION AIR) | |
| 9. | 320-3063 | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC) | |
| 10. | 332-7865 | [2] | TIE-CABLE | |
| 11. | 339-8822 | [1] | SENSOR AS-TEMPERATURE | |
| 12. | 386-3803 | [1] | MANIFOLD AS | |
| 295-6661 | [1] | PLUG | ||
| 13. | 385-4319 | [1] | PIPE AS | |
| 330-8196 | [2] | SEAL-O-RING | ||
| 14. | 385-4320 | [1] | PIPE AS | |
| 330-8196 | [2] | SEAL-O-RING | ||
| 15. | 355-9555 | [1] | BRACKET | |
| 16. | 358-9934 | [2] | UNION | |
| 17. | 385-0697 | [2] | CLAMP | |
| 18. | 359-5102 | [1] | BRACKET AS | |
| 19. | 124-3815 M | [7] | BOLT (M8X1.25X16-MM) | |
| 20. | 228-4947 | [2] | SEAL-O-RING | |
| 21. | 232-3861 | [1] | PLUG (BLANKING) | |
| 22. | 238-0120 | [1] | SENSOR GP-SPEED (TIMING, CAMSHAFT) | |
| 22A. | 238-0120 | [1] | SENSOR GP-SPEED (TIMING, CRANKSHAFT) | |
| 23. | 6I-0254 M | [3] | BOLT (M8X1.25X30-MM) | |
| M | METRIC PART | |||
#SEBP56680345
351-8193: SENSOR GP-ENGINE
351-8193 SENSOR GP-ENGINE
S/N C8N1-UP
PART OF 345-2887, 434-2181, 465-1365 ENGINE AR-PRIMARY
Type 2
S/N C8N1-UP
PART OF 345-2887, 434-2181, 465-1365 ENGINE AR-PRIMARY
Type 2
For full view, you need register
Parts for your 320E EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 199-9252 | [3] | SEAL-O-RING | |
| 2. | 199-9267 | [4] | SEAL-O-RING | |
| 3. | 199-9751 | [1] | SEAL-O-RING | |
| 4. | 256-6454 | [1] | SENSOR-TEMPERATURE (2-PIN)(COOLANT TEMPERATURE) | |
| 4A. | 256-6454 | [1] | SENSOR-TEMPERATURE (2-PIN)(AIR INLET MANIFOLD) | |
| 5. | 276-5603 | [1] | SEAL-O-RING | |
| 6. | 320-3060 | [1] | SENSOR GP-PRESSURE (ENGINE OIL PRESSURE) | |
| 7. | 320-3061 | [1] | SENSOR GP-PRESSURE (NRS OUTLET) | |
| 7A. | 320-3061 | [1] | SENSOR GP-PRESSURE (NRS INLET) | |
| 8. | 320-3062 | [1] | SENSOR GP-PRESSURE (ARD COMBUSTION AIR) | |
| 9. | 320-3063 | [1] | SENSOR GP-PRESSURE (ATMOSPHERIC) | |
| 10. | 332-7865 | [2] | TIE-CABLE | |
| 11. | 339-8822 | [1] | SENSOR AS-TEMPERATURE | |
| 11A. | 281-8802 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | |
| 12. | 388-7603 | [1] | MANIFOLD AS | |
| 12A. | 295-6661 | [1] | PLUG | |
| 13. | 385-4319 | [1] | PIPE AS | |
| 13A. | 330-8196 | [2] | SEAL-O-RING | |
| 14. | 385-4320 | [1] | PIPE AS | |
| 14A. | 330-8196 | [2] | SEAL-O-RING | |
| 15. | 369-1202 C | [1] | BRACKET AS | |
| 16. | 358-9934 | [2] | UNION | |
| 17. | 385-0697 | [2] | CLAMP | |
| 19. | 124-3815 M | [7] | BOLT (M8X1.25X16-MM) | |
| 20. | 228-4947 | [2] | SEAL-O-RING | |
| 21. | 232-3861 | [1] | PLUG (BLANKING) | |
| 22. | 238-0120 | [1] | SENSOR GP-SPEED (TIMING, CAMSHAFT) | |
| 22A. | 238-0120 | [1] | SENSOR GP-SPEED (TIMING, CRANKSHAFT) | |
| 23. | 6I-0254 M | [3] | BOLT (M8X1.25X30-MM) | |
| 24. | 330-8196 | [1] | SEAL-O-RING | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP56680346
423-6434: SENSOR GP-LIQUID LEVEL
423-6434 SENSOR GP-LIQUID LEVEL
S/N SXE1-UP; LAK1-UP; AWS1-UP; KLT1-UP
PART OF 360-5510, 483-0997 FILTER GP-WATER SEP & FUEL
S/N SXE1-UP; LAK1-UP; AWS1-UP; KLT1-UP
PART OF 360-5510, 483-0997 FILTER GP-WATER SEP & FUEL
For full view, you need register
Parts for your 320E EXCAVATOR:
CATERPILLAR SIS#SEBP56680347
344-4514: SENSOR GP-MACHINE LEVEL
344-4514 SENSOR GP-MACHINE LEVEL
S/N SXE1-UP; LAK1-UP
PART OF 344-4508, 344-4509 SPECIAL AR, 445-7435, 445-7441 SPECIAL AR-SHOVEL CRANE
S/N SXE1-UP; LAK1-UP
PART OF 344-4508, 344-4509 SPECIAL AR, 445-7435, 445-7441 SPECIAL AR-SHOVEL CRANE
For full view, you need register
Parts for your 320E EXCAVATOR:
CATERPILLAR SIS#SEBP56680348
345-1948: SENSOR GP-POSITION
345-1948 SENSOR GP-POSITION
S/N SXE1-UP; LAK1-UP; AWS1-UP; KLT1-UP
PART OF 338-6927, 338-6929, 431-4578, 449-4165 SENSOR & MTG GP-POSITION
S/N SXE1-UP; LAK1-UP; AWS1-UP; KLT1-UP
PART OF 338-6927, 338-6929, 431-4578, 449-4165 SENSOR & MTG GP-POSITION
For full view, you need register
Parts for your 320E EXCAVATOR:
CATERPILLAR SIS#SEBP56680349
331-1134: SENSOR GP-PRESSURE
331-1134 SENSOR GP-PRESSURE
S/N SXE1651-UP; LAK264-UP; AWS231-UP; KLT174-UP
PART OF 455-7493 LINES GP-AIR
S/N SXE1651-UP; LAK264-UP; AWS231-UP; KLT174-UP
PART OF 455-7493 LINES GP-AIR
For full view, you need register
Parts for your 320E EXCAVATOR:
CATERPILLAR SISInformation:
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Special Instruction
Instructions for Installing Rotary Position Sensor for Cat<SUP>®</SUP> Grade Control on Certain Series E and Series F Excavators {5736, 7220}
Instructions for Installing Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736, 7220}
Instructions for Installing Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736, 7220}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Machine Guidance Upgrades For Cat<SUP>®</SUP> Grade Control Hydraulic Excavators {7220}
Machine Guidance Upgrades For Cat® Grade Control Hydraulic Excavators {7220}
Machine Guidance Upgrades For Cat® Grade Control Hydraulic Excavators {7220}
Troubleshooting Guide for the Rotary Position Sensor for Cat<SUP>®</SUP> Grade Control on Certain Series E and Series F Excavators {5736}
Troubleshooting Guide for the Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736}
Troubleshooting Guide for the Rotary Position Sensor for Cat® Grade Control on Certain Series E and Series F Excavators {5736}
Technical Information Bulletin
Failure of Temperature Sensor Gp in Clean Emissions Module on certain Cat<SUP>®</SUP> Products{108D, 1408, 1919}
Failure of Temperature Sensor Gp in Clean Emissions Module on certain Cat® Products{108D, 1408, 1919}
Failure of Temperature Sensor Gp in Clean Emissions Module on certain Cat® Products{108D, 1408, 1919}
The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}
The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}
The Rotary Position Sensor is Off-Center on Certain E series and F series Excavators{0766, 5736}
Failure of Rotary Position Sensors on Certain Caterpillar Machines {1913, 5736, 5737}
Failure of Rotary Position Sensors on Certain Caterpillar Machines {1913, 5736, 5737}
Failure of Rotary Position Sensors on Certain Caterpillar Machines {1913, 5736, 5737}
Specifications
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Troubleshooting
Disassembly and Assembly
Temperature Sensor (Cooled Exhaust Gas) - Remove and Install
C6.6 Engines for Caterpillar Built Machines
C6.6 Engines for Caterpillar Built Machines
Pressure Sensor (Cooled Exhaust Gas) - Remove and Install - NRS Inlet and Outlet Pressure Sensors
C6.6 Engines for Caterpillar Built Machines
C6.6 Engines for Caterpillar Built Machines
Pressure Sensor (DPF) - Remove and Install - Clean Emissions Module
C6.6 Engines for Caterpillar Built Machines
C6.6 Engines for Caterpillar Built Machines
Service Magazine
New Engine Software on Certain C7.1, C6.6, and C4.4 Machine Engines {1250, 1920, 7431}
New Engine Software on Certain C7.1, C6.6, and C4.4 Machine Engines {1250, 1920, 7431}
New Engine Software on Certain C7.1, C6.6, and C4.4 Machine Engines {1250, 1920, 7431}
Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}
Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}
Improvements Have Been Made to the Temperature Sensors for Certain C9 through C32 Machine Engines {7400, 7400}
Soot Sensor Module on Certain C4.4 and C7.1 Machine Engines {108F, 1335}
Soot Sensor Module on Certain C4.4 and C7.1 Machine Engines {108F, 1335}
Soot Sensor Module on Certain C4.4 and C7.1 Machine Engines {108F, 1335}
