AVSPARE.COM
parts catalog

328-7416 STARTING MOTOR GP-ELECTRIC S/N C8N1-UP 24-VOLT PART OF 345-2887 ENGINE AR-PRIMARY 320E EXCAVATOR




ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
 

#SEBP56680360
 

328-7416: STARTING MOTOR GP-ELECTRIC

328-7416 STARTING MOTOR GP-ELECTRIC
S/N C8N1-UP
24-VOLT
PART OF 345-2887 ENGINE AR-PRIMARY
i04215957 SEBP5668
  For full view, you need register

Parts for your 320E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 183-1343 [3] STUD  
2. 110-8760 [1] STRAP  
3. 349-9075 Y [1] STARTING MOTOR GP-ELECTRIC  
4. 362-0714 [1] HARNESS AS-POWER  
  2L-8076 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  230-4012 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
5. 6I-0233 M [3] NUT (M12X1.75-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56680361
 

349-9075: STARTING MOTOR GP-ELECTRIC

349-9075 STARTING MOTOR GP-ELECTRIC
S/N C8N1-UP
24-VOLT
PART OF 328-7416 STARTING MOTOR GP-ELECTRIC
i04219191 SEBP5668
  For full view, you need register

Parts for your 320E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 352-6069 [1] KIT-SWITCH (RELAY)(STARTING MOTOR)  
    (INCLUDES SWITCH AS, JUMP START PROTECTION COVER, BOLTS, & ANCHOR)
2. 359-4539 [1] KIT-HARDWARE (MAGNETIC SWITCH)(STARTING MOTOR)  
    (INCLUDES NUTS & WASHER)
 

#SEBP56680362
 

354-5671: STARTING MOTOR GP-ELECTRIC

354-5671 STARTING MOTOR GP-ELECTRIC
S/N C8N1-UP
PART OF 391-2934 STARTING MOTOR GP-ELECTRIC
i06913696 SEBP5668
  For full view, you need register

Parts for your 320E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 230-4012 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
2. 488-3767 [1] YOKE AS  
3. 488-3768 [1] HOLDER AS-BRUSH  
4. 488-3770 [1] ARMATURE AS  
5. 488-3771 [1] DRIVE AS-CLUTCH  
6. 488-3779 [1] HOUSING AS-DRIVE  
7. 488-3787 [1] SWITCH AS-RELAY  
   
    AVAILABLE REPAIR KIT(S):
  488-3794 [1] KIT-GEAR  
    (KIT INCLUDES: SHOCK ABSORBER AND GEAR)
  488-3797 [1] KIT-SHIFT LEVER  
    (KIT INCLUDES: SHAFT, LEVER, AND WASHERS)
  488-3798 [1] KIT-PINION  
    (KIT INCLUDES: NUTS, PINION,RETAINER, AND SPR)
  488-3799 [1] KIT-HARDWARE  
    (KIT INCLUDES: BOLTS, NUTS, SCREWS, AND WASHERS)
 

#SEBP56680363
 

391-2934: STARTING MOTOR GP-ELECTRIC

391-2934 STARTING MOTOR GP-ELECTRIC
S/N C8N1-UP
PART OF 345-2887, 434-2181, 465-1365 ENGINE AR-PRIMARY
i04862570 SEBP5668
  For full view, you need register

Parts for your 320E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 354-5671 Y [1] STARTING MOTOR GP-ELECTRIC  
2. 183-1343 [3] STUD  
3. 6I-0233 M [3] NUT (M12X1.75-THD)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP56680364
 

357-3849: SWITCH & MTG GP-LIMIT

357-3849 SWITCH & MTG GP-LIMIT -WINDOW WIPER
S/N SXE1-UP; LAK1-UP; AWS1-UP; KLT1-UP
PART OF 363-9632 INSTALLATION AR, 316-8853 INSTALLATION AR-CAB
i03862670 SEBP5668
  For full view, you need register

Parts for your 320E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-1163 [1] BRACKET  
2. 357-3967 Y [1] SWITCH GP-LIMIT (WIPER)  
3. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56680365
 

7N-0719: SWITCH GP-DISCONNECT

7N-0719 SWITCH GP-DISCONNECT -BATTERY
S/N SXE1-UP; LAK1-UP; AWS1-UP; KLT1-UP
PART OF 341-5331 WIRING GP-CHASSIS
i01102384 SEBP5668
  For full view, you need register

Parts for your 320E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-3922 [1] LOCKWASHER  
2. 8H-5303 [1] NUT (3/4-16-THD)  
3. 9F-5644 [2] LOCKWASHER  
4. 6F-7045 [2] NUT-FULL (3/8-24-THD)  
5. 8H-5306 [1] KEY (BATTERY DISCONNECT)  
 

#SEBP56680366
 

357-3967: SWITCH GP-LIMIT

357-3967 SWITCH GP-LIMIT -WIPER
S/N SXE1-UP; LAK1-UP; AWS1-UP; KLT1-UP
PART OF 357-3849 SWITCH & MTG GP-LIMIT
i04086413 SEBP5668
  For full view, you need register

Parts for your 320E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 111-4799 [1] SWITCH AS-LIMIT (WIPER)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  5P-5998 [3] TUBE  
3. 357-3968 [1] BRACKET AS  
4. 357-3971 [1] BRACKET  
5. 096-5962 [2] WASHER-HARD (3.4X7X0.8-MM THK)  
6. 120-9027 M [2] SCREW-PAN HEAD (M3X0.5X16-MM)  
7. 5P-8524 [1] GROMMET  
8. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
  M   METRIC PART
 

#SEBP56680367
 

334-6464: SWITCH GP-POSITION

334-6464 SWITCH GP-POSITION -HYDRAULIC LOCKOUT
S/N SXE1-UP; LAK1-UP; AWS1-UP; KLT1-UP
PART OF 316-8822 CONSOLE GP-OPERATOR
FIELD REPLACEMENT ORDER @@@@@383-5711@@@@@
i04033018 SEBP5668
  For full view, you need register

Parts for your 320E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
3. 111-4799 [1] SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  5P-5998 D TUBE (0.3-M)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 334-6454 [1] KNOB  
5. 087-4683 [2] LOCKWASHER  
6. 120-9027 M [2] SCREW-PAN HEAD (M3X0.5X16-MM)  
7. 369-4778 [2] SCREW-TRUSS HEAD  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP56680368
 

383-5711: SWITCH GP-POSITION

383-5711 SWITCH GP-POSITION -HYDRAULIC LOCKOUT
S/N SXE2125-UP; LAK295-UP; AWS271-UP; KLT180-UP
PART OF 316-8822 CONSOLE GP-OPERATOR
Type 1
FIELD REPLACEMENT FOR @@@@@334-6464@@@@@
i04786467 SEBP5668
  For full view, you need register

Parts for your 320E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
3. 111-4799 [1] SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  5P-5998 D TUBE (0.3-M)  
4. 383-5712 [1] KNOB  
5. 087-4683 [2] LOCKWASHER  
6. 120-9027 M [2] SCREW-PAN HEAD (M3X0.5X16-MM)  
7. 5C-8312 M [2] NUT (M4X0.7-THD)  
8. 383-5713 [2] PIN  
9. 383-5714 [2] PLATE  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP56680369
 

383-5711: SWITCH GP-POSITION

383-5711 SWITCH GP-POSITION -HYDRAULIC LOCKOUT
S/N SXE2125-UP; LAK295-UP; AWS271-UP; KLT180-UP
PART OF 316-8822 CONSOLE GP-OPERATOR
Type 2
FIELD REPLACEMENT FOR @@@@@334-6464@@@@@
i06299073 SEBP5668
  For full view, you need register

Parts for your 320E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 4I-3038 [2] WASHER (3.3X8X0.5-MM THK)  
3. 111-4799 [1] SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  5P-5998 D TUBE (0.3-M)  
4. 5C-8312 M [2] NUT (M4X0.7-THD)  
5. 120-9027 M [2] SCREW-PAN HEAD (M3X0.5X16-MM)  
  D   ORDER BY THE METER
  M   METRIC PART
 

Information:

Special Instruction
Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}
Retrofit Procedure for the Electric Starting Motor Group on Certain 300E Series Excavators and Mobile Hydraulic Power Units{1453}
Retrofit Procedure for the Electric Starting Motor Group on Certain 300E Series Excavators and Mobile Hydraulic Power Units{1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Starter Motor
C6.6 Engines For Caterpillar Built Machines
Information Release Memo
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 &amp; C3.4 ENGINES
CAT� REMAN ANNOUNCES ADDITIONAL REMANUFACTURED COMPONENTS FOR CERTAIN 3044, 3046, 3064, 3066 & C3.4 ENGINES
Testing and Adjusting
Electric Starting System - Test
C6.6 Engines for Caterpillar Built Machines
Disassembly and Assembly
Electric Starting Motor - Remove and Install
C6.6 Engines for Caterpillar Built Machines
Electric Starting Motor
320E and 323E Excavators C6.6 Engine Supplement
Service Magazine
Starting Motor Servicing on Certain C4.4, C6.4, C6.6, and C7.1 Machine Engines {1453}
Starting Motor Servicing on Certain C4.4, C6.4, C6.6, and C7.1 Machine Engines {1453}

Caterpillar Parts SIS Catalog 320E :

Truck sale:

 
Caterpillar 320E
- Crawler Excavators
THE CHINA ENGINEERS, LTD
 
Caterpillar 320E
- Crawler Excavators
THE CHINA ENGINEERS, LTD
 
Caterpillar 320E
- Crawler Excavators
THE CHINA ENGINEERS, LTD
122,000 
Caterpillar 320E, Crawler Excavators, Construction
- Crawler Excavators
ALTORFER INDUSTRIES
4,860 
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.