ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP56720460
319-0879: WIRING GP-CAB
319-0879 WIRING GP-CAB -REAR, RH
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 350-8399 CONTROL & MONITOR GP-CAB
Type 3
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 350-8399 CONTROL & MONITOR GP-CAB
Type 3
For full view, you need register
Parts for your 336E EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [3] | STRAP-CABLE | |
| 2. | 7K-1181 | [12] | STRAP-CABLE | |
| 3. | 167-3593 | [1] | STRAP | |
| 4. | 213-0772 | [1] | SWITCH AS-MAGNETIC (24-VOLT)(MAIN RELAY) | |
| 5. | 270-2679 | [1] | LOCKWASHER | |
| 6. | 306-8689 | [1] | CABLE AS | |
| 6V-2366 J | CABLE-ELECTRICAL (4-GA, RED)(3-DM) | |||
| 9G-4343 | [2] | TERMINAL-RING (4-GA, 1/4-IN SCREW) | ||
| 7. | 325-8700 | [1] | PLUG AS | |
| 8T-8737 | [12] | PLUG-SEAL | ||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 455-0709 | [1] | SEAL-CONNECTOR | ||
| 8. | 328-0046 | [1] | CABLE AS | |
| 6V-2369 D | CABLE (4-GA, BLACK)(0.2-M) | |||
| 9G-4343 | [2] | TERMINAL-RING (4-GA, 1/4-IN SCREW) | ||
| 9. | 328-0060 | [1] | BRACKET AS | |
| 10. | 328-0186 | [1] | BRACKET AS-BASE | |
| 11. | 350-8462 | [1] | CABLE AS | |
| 6V-2366 J | CABLE-ELECTRICAL (4-GA, RED)(3-DM) | |||
| 9G-4343 | [1] | TERMINAL-RING (4-GA, 1/4-IN SCREW) | ||
| 324-5685 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 328-0111 | [1] | PIN-CONNECTOR | ||
| 12. | 388-6734 Y | [1] | PANEL GP-FUSE (FUSE, RELAY) | |
| 13. | 483-1261 | [1] | PANEL AS-SWITCH (12/24-VDC)(OPERATOR CONSOLE, RH) | |
| 483-1262 | [1] | KNOB | ||
| 14. | 459-6025 | [1] | BRACKET | |
| 15. | 461-3979 C | [1] | HARNESS AS-CAB | |
| 8T-8729 | [38] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8730 | [54] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [96] | STRAP-CABLE | ||
| 5P-6001 D | TUBE-HEAT SHRINK (4.75-MM DIA)(0.1-M) | |||
| 7Y-3951 | [4] | TERMINAL-BLADE (14-GA) | ||
| 7Y-3952 | [2] | PLUG-CONNECTOR (2-PIN) | ||
| 7Y-3966 | [1] | TERMINAL AS | ||
| 7Y-3962 | [1] | TERMINAL-BULLET (MALE) | ||
| 7Y-3964 | [1] | TUBE (CONNECTOR TERMINAL) | ||
| 7Y-3967 | [10] | TERMINAL AS | ||
| (EACH INCLUDES) | ||||
| 7Y-3963 | [1] | TERMINAL-BULLET (FEMALE) | ||
| 7Y-3965 | [1] | TUBE (RECEPTACLE TERMINAL) | ||
| 8T-8737 | [113] | PLUG-SEAL | ||
| 102-7964 | [2] | PLUG-CONNECTOR (16-PIN) | ||
| 102-7965 | [108] | TERMINAL (FEMALE) | ||
| 9W-0852 | [17] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0844 | [29] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 111-4815 | [2] | PLUG-CONNECTOR (7-PIN) | ||
| 111-4816 | [1] | PLUG-CONNECTOR (13-PIN) | ||
| 116-0086 | [1] | PLUG-CONNECTOR (9-PIN) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(59-CM) | |||
| 121-1022 | [1] | DIODE | ||
| 121-1173 | [3] | TERMINAL (MALE) | ||
| 125-4766 | [1] | PLUG-CONNECTOR (17-PIN) | ||
| 125-4784 | [1] | PLUG-CONNECTOR (12-PIN) | ||
| 125-4785 | [42] | TERMINAL (FEMALE) | ||
| 125-4838 | [2] | WEDGE-PLUG LOCK (7-PIN) | ||
| 125-4839 | [1] | WEDGE-PLUG LOCK (9-PIN) | ||
| 125-4840 | [1] | WEDGE-PLUG LOCK (13-PIN) | ||
| 125-4841 | [2] | WEDGE-PLUG LOCK (21-PIN) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(140-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(55-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(10-CM) | |||
| 9X-3402 | [112] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [112] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8065 | [3] | TERMINAL-RING (10-GA TO 12-GA, NO. 8 SCREW) | ||
| 2L-8067 | [3] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 138-5184 | [1] | PLUG-CONNECTOR (20-PIN) | ||
| 9X-3401 | [54] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [54] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 153-2540 | [10] | TERMINAL (FEMALE) | ||
| 153-2541 | [1] | PLUG-CONNECTOR (10-PIN) | ||
| 153-2602 | [2] | RECEPTACLE-CONNECTOR (1-PIN) | ||
| 153-2620 | [1] | PLUG AS-CONNECTOR (54-PIN, BLACK) | ||
| 153-2630 | [1] | PLUG AS-CONNECTOR (54-PIN, BROWN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 163-6759 | [1] | SEAL | ||
| 153-2631 | [2] | TERMINAL (14-GA TO 20-GA) | ||
| 155-2256 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 155-2258 | [1] | WEDGE-PLUG LOCK (12-PIN) | ||
| 163-6803 | [9] | PLUG-CONNECTOR (5-PIN) | ||
| 163-6804 | [1] | PLUG-CONNECTOR (8-PIN) | ||
| 167-3487 | [9] | WEDGE-PLUG LOCK (5-PIN) | ||
| 167-3542 | [1] | RECEPTACLE-CONNECTOR (5-PIN) | ||
| 190-7614 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 239-7356 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 230-4009 | [5] | PLUG AS-CONNECTOR (12-PIN) | ||
| (EACH PLUG AS INCLUDES) | ||||
| 455-0709 | [1] | SEAL-CONNECTOR | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 455-0705 | [1] | SEAL-CONNECTOR | ||
| 230-5008 | [2] | PLUG AS-CONNECTOR (4-PIN) | ||
| (EACH INCLUDES) | ||||
| 455-0706 | [1] | SEAL-CONNECTOR | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 455-0707 | [1] | SEAL-CONNECTOR | ||
| 231-2295 | [3] | PLUG AS-CONNECTOR (8-PIN) | ||
| (EACH INCLUDES) | ||||
| 455-0708 | [1] | SEAL-CONNECTOR | ||
| 238-2363 | [7] | TERMINAL (FEMALE) | ||
| 243-4505 | [3] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 243-4508 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 243-4509 | [1] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 324-5678 | [3] | RESISTOR AS (120-OHM) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 324-5680 | [1] | RECEPTACLE AS-CONNECTOR (120-PIN) | ||
| 324-5681 | [1] | SEAL | ||
| 324-5682 | [1] | PANEL AS | ||
| 324-5683 | [1] | SEAL | ||
| 324-5684 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 327-9954 | [3] | CAP (12-PIN CONNECTOR) | ||
| 327-9955 | [1] | CAP (1-PIN CONNECTOR) | ||
| 342-2973 | [1] | CAP-CONNECTOR (3-PIN) | ||
| 342-2975 | [1] | CAP-CONNECTOR (8-PIN) | ||
| 342-2976 | [3] | CAP-CONNECTOR (12-PIN) | ||
| 342-2978 | [2] | CAP-CONNECTOR (4-PIN) | ||
| 424-4322 | [1] | COVER-CONNECTOR | ||
| 451-8019 | [1] | RECEPTACLE AS-CONNECTOR (14-PIN) | ||
| 16. | 087-3796 | [1] | SPACER (17.61X21.34X48-MM THK) | |
| 17. | 095-0723 M | [1] | SCREW-SPECIAL (M3X0.5X10-MM) | |
| 18. | 096-5962 | [1] | WASHER-HARD (3.4X7X0.8-MM THK) | |
| 19. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 20. | 114-6658 C | [1] | WASHER (6.5X17X1-MM THK) | |
| 21. | 156-6175 | [6] | CLIP (LADDER) | |
| 22. | 163-6795 | [1] | STRAP-CABLE | |
| 23. | 203-9007 | [1] | NUT (1-1/2-18-THD) | |
| 24. | 4P-7581 | [3] | CLIP (LADDER) | |
| 25. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 26. | 5C-9553 M | [2] | BOLT (M6X1X16-MM) | |
| 27. | 5P-4115 | [3] | WASHER-HARD (7.2X19X2-MM THK) | |
| 28. | 6V-5210 M | [4] | SCREW-MACHINE (M4X0.7X10-MM) | |
| 29. | 7X-2535 M | [1] | BOLT (M6X1X60-MM) | |
| 30. | 8T-0328 | [2] | WASHER-HARD (5.5X10X1-MM THK) | |
| 31. | 8T-4127 M | [2] | SCREW-MACHINE (M5X0.8X20-MM) | |
| 32. | 9X-2042 M | [24] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 33. | 9X-2046 M | [4] | SCREW-TRUSS HEAD (M6X1X35-MM) | |
| 34. | 9X-8256 | [3] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| J | ORDER BY THE DECIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56720461
319-1189: WIRING GP-CAB
319-1189 WIRING GP-CAB -GRADE CONTROL
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 339-5196 GRADE CONTROL AR
Type 1
AN ATTACHMENT
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 339-5196 GRADE CONTROL AR
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 336E EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 C | [12] | STRAP-CABLE | |
| 2. | 163-6795 | [2] | STRAP-CABLE | |
| 3. | 369-0093 C | [1] | HARNESS AS-CAB | |
| 3S-2093 | [17] | STRAP-CABLE | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 8T-8737 | [63] | PLUG-SEAL | ||
| 9W-1951 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 9W-0852 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(50-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 9X-3402 | [12] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [12] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [34] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [34] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 230-4009 | [2] | PLUG AS-CONNECTOR (12-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 231-2295 | [1] | PLUG AS-CONNECTOR (8-PIN) | ||
| 264-7033 | [1] | SEAL-CONNECTOR | ||
| 239-7356 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 243-4505 | [2] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 243-4506 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 243-4509 | [2] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 243-4510 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 272-5000 | [2] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 324-5678 | [2] | RESISTOR AS (120-OHM) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 4. | 350-8498 | [1] | HARNESS AS-PLATFORM | |
| 3S-2093 | [3] | STRAP-CABLE | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 9X-3402 | [16] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [16] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [15] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [15] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 243-4506 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 328-0076 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 342-2973 | [1] | CAP-CONNECTOR (3-PIN) | ||
| 5. | 7K-1181 C | [1] | STRAP-CABLE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP56720462
319-1189: WIRING GP-CAB
319-1189 WIRING GP-CAB -GRADE CONTROL
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 339-5196 GRADE CONTROL AR
Type 2
AN ATTACHMENT
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 339-5196 GRADE CONTROL AR
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 336E EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [12] | STRAP-CABLE | |
| 2. | 163-6795 | [2] | STRAP-CABLE | |
| 3. | 417-9083 C | [1] | HARNESS AS-CAB | |
| 3S-2093 | [18] | STRAP-CABLE | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 8T-8737 | [85] | PLUG-SEAL | ||
| 9W-1951 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 9W-0852 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(50-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 9X-3402 | [13] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [13] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [35] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [35] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 230-4009 | [2] | PLUG AS-CONNECTOR (12-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 231-2295 | [1] | PLUG AS-CONNECTOR (8-PIN) | ||
| 264-7033 | [1] | SEAL-CONNECTOR | ||
| 239-7356 | [2] | PLUG AS-CONNECTOR (12-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 243-4505 | [2] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 243-4506 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 243-4509 | [2] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 243-4510 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 272-5000 | [3] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 324-5678 | [2] | RESISTOR AS (120-OHM) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 4. | 350-8498 | [1] | HARNESS AS-PLATFORM | |
| 3S-2093 | [3] | STRAP-CABLE | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 9X-3402 | [16] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [16] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [15] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [15] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 243-4506 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 328-0076 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 342-2973 | [1] | CAP-CONNECTOR (3-PIN) | ||
| 5. | 7K-1181 C | [2] | STRAP-CABLE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP56720463
319-1189: WIRING GP-CAB
319-1189 WIRING GP-CAB -GRADE CONTROL
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 339-5196 GRADE CONTROL AR
Type 3
AN ATTACHMENT
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 339-5196 GRADE CONTROL AR
Type 3
AN ATTACHMENT
For full view, you need register
Parts for your 336E EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 C | [13] | STRAP-CABLE | |
| 2. | 163-6795 | [2] | STRAP-CABLE | |
| 3. | 450-4671 C | [1] | HARNESS AS-CAB | |
| 3S-2093 | [18] | STRAP-CABLE | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 8T-8737 | [83] | PLUG-SEAL | ||
| 9W-1951 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(50-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 9X-3402 | [13] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [13] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8077 | TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW) | |||
| 9X-3401 | [35] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [35] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 230-4009 | [2] | PLUG AS-CONNECTOR (12-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 231-2295 | [1] | PLUG AS-CONNECTOR (8-PIN) | ||
| 264-7033 | [1] | SEAL-CONNECTOR | ||
| 239-7356 | [2] | PLUG AS-CONNECTOR (12-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 243-4505 | [2] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 243-4509 | [2] | RECEPTACLE AS-CONNECTOR (8-PIN) | ||
| 243-4510 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 272-5000 | [3] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 324-5678 | [2] | RESISTOR AS (120-OHM) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 4. | 350-8498 | [1] | HARNESS AS-PLATFORM | |
| 3S-2093 | [3] | STRAP-CABLE | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 9X-3402 | [16] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [16] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [15] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [15] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 243-4506 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 328-0076 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 342-2973 | [1] | CAP-CONNECTOR (3-PIN) | ||
| 5. | 7K-1181 | [2] | STRAP-CABLE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP56720464
324-5819: WIRING GP-CAB
324-5819 WIRING GP-CAB -WORK AREA VISUAL SYSTEM, REAR
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 314-3612, 360-7207 CAMERA & MIRROR AR, 344-0797 INSTALLATION AR
AN ATTACHMENT
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 314-3612, 360-7207 CAMERA & MIRROR AR, 344-0797 INSTALLATION AR
AN ATTACHMENT
For full view, you need register
Parts for your 336E EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [9] | STRAP-CABLE | |
| 2. | 111-4836 | [1] | CLIP | |
| 3. | 328-0340 | [1] | HARNESS AS-WIRING | |
| 8T-8730 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [3] | STRAP-CABLE | ||
| 7Y-3962 | [1] | TERMINAL-BULLET (MALE) | ||
| 7Y-3964 | [1] | TUBE (CONNECTOR TERMINAL) | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 2L-8077 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW) | ||
| 230-5010 | [1] | PLUG AS-CONNECTOR (6-PIN) | ||
| 264-7032 | [1] | SEAL-CONNECTOR | ||
| 347-0115 J | CABLE (37-DM) | |||
| 4. | 423-4415 | [1] | SHEET | |
| 5. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 6. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 7. | 2V-8260 | [1] | GROMMET | |
| 8. | 7K-1181 | [1] | STRAP-CABLE | |
| E | ORDER BY THE CENTIMETER | |||
| J | ORDER BY THE DECIMETER | |||
| M | METRIC PART | |||
#SEBP56720465
327-9961: WIRING GP-CAB
327-9961 WIRING GP-CAB -CMB FCTN, 1-WAY FLOW, HAMMER
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 310-0432, 323-7872, 349-2261, 349-2262 CONTROL AR-AUXILIARY, 314-3606, 331-7908, 376-9638, 376-9639 FILTER AR-HYDRAULIC
AN ATTACHMENT
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 310-0432, 323-7872, 349-2261, 349-2262 CONTROL AR-AUXILIARY, 314-3606, 331-7908, 376-9638, 376-9639 FILTER AR-HYDRAULIC
AN ATTACHMENT
For full view, you need register
Parts for your 336E EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [12] | STRAP-CABLE | |
| 2. | 7K-1181 | [2] | STRAP-CABLE | |
| 3. | 116-0118 | [1] | CLIP | |
| 4. | 163-6795 | [1] | STRAP-CABLE | |
| 5. | 360-6294 | [1] | HARNESS AS-CAB | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [6] | STRAP-CABLE | ||
| 8T-8737 | [29] | PLUG-SEAL | ||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 243-4506 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 243-4510 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 324-5684 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 6. | 360-6295 | [1] | HARNESS AS-PLATFORM | |
| 3S-2093 | [2] | STRAP-CABLE | ||
| 8T-8737 | [11] | PLUG-SEAL | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 9X-3402 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 237-0227 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 243-4506 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 328-0076 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 342-2972 | [1] | CAP-CONNECTOR (2-PIN) | ||
| E | ORDER BY THE CENTIMETER | |||
#SEBP56720466
328-0054: WIRING GP-CAB
328-0054 WIRING GP-CAB -ROOF
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 350-8399 CONTROL & MONITOR GP-CAB
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 350-8399 CONTROL & MONITOR GP-CAB
For full view, you need register
Parts for your 336E EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 7I-2673 | [2] | STRAP-CABLE | |
| 3. | 7Y-5505 | [2] | SPEAKER AS | |
| (EACH INCLUDES) | ||||
| 7Y-3951 | [2] | TERMINAL-BLADE (14-GA) | ||
| 7Y-3954 | [1] | CONNECTOR-PLUG (3-PIN) | ||
| 4. | 163-6795 | [5] | STRAP-CABLE | |
| 5. | 251-0637 | [4] | INSULATION | |
| 6. | 327-9967 | [1] | HARNESS AS-CAB | |
| 8T-8729 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [14] | STRAP-CABLE | ||
| 7Y-3950 | [4] | TERMINAL-BLADE (14-GA TO 20-GA) | ||
| 7Y-3955 | [2] | CONNECTOR-RECEPTACLE | ||
| 7Y-3962 | [2] | TERMINAL-BULLET (MALE) | ||
| 7Y-3964 | [2] | TUBE (CONNECTOR TERMINAL) | ||
| 7Y-3963 | [2] | TERMINAL-BULLET (FEMALE) | ||
| 7Y-3965 | [2] | TUBE (RECEPTACLE TERMINAL) | ||
| 8T-8737 | [4] | PLUG-SEAL | ||
| 9W-0852 | [3] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 2L-8067 | [2] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 2L-8075 | [1] | TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW) | ||
| 167-3630 | [1] | CONNECTOR-PLUG | ||
| 167-3631 | [2] | TERMINAL (FEMALE) | ||
| 243-4510 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 5P-3059 | [1] | TERMINAL-FORK (18-GA TO 22-GA, NO. 6 SCREW) | ||
| 7. | 466-7113 | [1] | ANTENNA AS | |
| 8. | 342-3601 | [1] | COVER AS | |
| 9. | 096-6166 | [2] | WASHER-HARD (4.5X9X1-MM THK) | |
| 10. | 156-6175 | [1] | CLIP (LADDER) | |
| 11. | 6V-9491 M | [2] | SCREW-MACHINE (M4X0.7X20-MM) | |
| 12. | 8T-0337 M | [6] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 13. | 9X-2042 M | [2] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| 14. | 101-2846 E | GUARD (9-CM EACH) | ||
| 15. | 7K-1181 | [1] | STRAP-CABLE | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP56720467
328-0103: WIRING GP-CAB
328-0103 WIRING GP-CAB -FRONT, RH
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 350-8399 CONTROL & MONITOR GP-CAB
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 350-8399 CONTROL & MONITOR GP-CAB
For full view, you need register
Parts for your 336E EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 163-6795 | [3] | STRAP-CABLE | |
| 2. | 366-4622 | [1] | KIT-SERVICE METER (32-VOLT DC) | |
| (INCLUDES METER & FILM) | ||||
| 3. | 360-6264 C | [1] | HARNESS AS-CAB | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 8T-8730 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [17] | STRAP-CABLE | ||
| 7Y-3951 | [8] | TERMINAL-BLADE (14-GA) | ||
| 7Y-3954 | [1] | CONNECTOR-PLUG (3-PIN) | ||
| 7Y-3958 | [1] | CONNECTOR-PLUG (6-PIN) | ||
| 8T-8737 | [7] | PLUG-SEAL | ||
| 102-7965 | [15] | TERMINAL (FEMALE) | ||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 111-4816 | [1] | PLUG-CONNECTOR (13-PIN) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 121-1168 | [1] | CONNECTOR-RECEPTACLE | ||
| 121-1173 | [14] | TERMINAL (MALE) | ||
| 125-4840 | [1] | WEDGE-PLUG LOCK (13-PIN) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 9X-3402 | [7] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 163-6803 | [1] | PLUG-CONNECTOR (5-PIN) | ||
| 167-3487 | [1] | WEDGE-PLUG LOCK (5-PIN) | ||
| 230-4009 | [1] | PLUG AS-CONNECTOR (12-PIN) | ||
| 264-7034 | [1] | SEAL-CONNECTOR | ||
| 238-2366 | [7] | TERMINAL (MALE) | ||
| 4. | 342-2891 | [1] | HARNESS AS-CAB | |
| 3S-2093 | [2] | STRAP-CABLE | ||
| 7Y-3950 | [3] | TERMINAL-BLADE (14-GA TO 20-GA) | ||
| 7Y-3955 | [1] | CONNECTOR-RECEPTACLE | ||
| 349-5084 | [3] | TERMINAL-BLADE | ||
| 349-5085 | [3] | RECEPTACLE AS-CONNECTOR | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP56720468
378-6947: WIRING GP-CAB
378-6947 WIRING GP-CAB -COUPLER
S/N KED1-UP; TEG1-UP; GTJ1-UP
PART OF 378-6948 WIRING GP-CAB
AN ATTACHMENT
S/N KED1-UP; TEG1-UP; GTJ1-UP
PART OF 378-6948 WIRING GP-CAB
AN ATTACHMENT
For full view, you need register
Parts for your 336E EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [6] | STRAP-CABLE | |
| 2. | 259-7180 | [1] | COVER | |
| 3. | 328-0401 | [1] | BRACKET | |
| 4. | 336-5880 Y | [1] | SWITCH GP-TOGGLE (QUICK COUPLER) | |
| 5. | 336-6279 | [1] | HARNESS AS-SOLENOID | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [7] | STRAP-CABLE | ||
| 7Y-3951 | [2] | TERMINAL-BLADE (14-GA) | ||
| 7Y-3952 | [1] | PLUG-CONNECTOR (2-PIN) | ||
| 8T-8737 | [10] | PLUG-SEAL | ||
| 167-3542 | [1] | RECEPTACLE-CONNECTOR (5-PIN) | ||
| 167-3543 | [4] | TERMINAL (MALE) | ||
| 324-5684 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | ||
| 6. | 9X-2042 M | [2] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP56720469
378-6948: WIRING GP-CAB
378-6948 WIRING GP-CAB
S/N KED1-UP; TEG1-UP; GTJ1-UP
PART OF 448-1172 CONTROL AR-QUICK COUPLER
AN ATTACHMENT
S/N KED1-UP; TEG1-UP; GTJ1-UP
PART OF 448-1172 CONTROL AR-QUICK COUPLER
AN ATTACHMENT
For full view, you need register
Parts for your 336E EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 378-6947 Y | [1] | WIRING GP-CAB | ||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Operation and Maintenance Manual
Special Instruction
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for the 417-4689 Hydraulic Lines Kit on Certain Hydraulic Excavators{1408, 5057, 5479}
Installation Procedure for the 417-4689 Hydraulic Lines Kit on Certain Hydraulic Excavators{1408, 5057, 5479}
Installation Procedure for the 417-4689 Hydraulic Lines Kit on Certain Hydraulic Excavators{1408, 5057, 5479}
Replacing the DPF Delta Pressure Sensor Lines and ARD Air Pressure Sensor Lines on 336E Excavators, 568 Excavators, and 336E Mobile Hydraulic Power Units{108D, 1408, 1439}
Replacing the DPF Delta Pressure Sensor Lines and ARD Air Pressure Sensor Lines on 336E Excavators, 568 Excavators, and 336E Mobile Hydraulic Power Units{108D, 1408, 1439}
Replacing the DPF Delta Pressure Sensor Lines and ARD Air Pressure Sensor Lines on 336E Excavators, 568 Excavators, and 336E Mobile Hydraulic Power Units{108D, 1408, 1439}
Installation Procedure for Warning Beacon on Certain E-Series Excavators {1408, 1431, 7301}
Installation Procedure for Warning Beacon on Certain E-Series Excavators {1408, 1431, 7301}
Installation Procedure for Warning Beacon on Certain E-Series Excavators {1408, 1431, 7301}
Updating the NOx Reduction System Delta Pressure Sensor on Certain C9.3 Through C32 Engines {1408, 191N}
Updating the NOx Reduction System Delta Pressure Sensor on Certain C9.3 Through C32 Engines {1408, 191N}
Updating the NOx Reduction System Delta Pressure Sensor on Certain C9.3 Through C32 Engines {1408, 191N}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Installation Procedure for the <NOBR>462-1661</NOBR> Coupler Control Ar on Certain Hydraulic Excavators {1408, 5057, 7301, 7405, 7557}
Installation Procedure for the462-1661 Coupler Control Ar on Certain Hydraulic Excavators {1408, 5057, 7301, 7405, 7557}
Installation Procedure for the
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Failure of Temperature Sensor Gp in Clean Emissions Module on certain Cat<SUP>®</SUP> Products{108D, 1408, 1919}
Failure of Temperature Sensor Gp in Clean Emissions Module on certain Cat® Products{108D, 1408, 1919}
Failure of Temperature Sensor Gp in Clean Emissions Module on certain Cat® Products{108D, 1408, 1919}
Specifications
Tool Operating Manual
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
Service Letter-Asia
Systems Operation
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
Testing and Adjusting
Wiring Harness (Open Circuit) - Test
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
Wiring Harness (Short Circuit) - Test
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
Electrical Connector - Inspect
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
System Schematic
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
Troubleshooting
Electrical Component and Connector Locations
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
MID 299, 96-4
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
MID 299, 96-9
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
MID 299, 600-4
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
MID 299, 600-9
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
MID 299, 2300-9
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
Disassembly and Assembly
Service Magazine
RF Soot Sensor System Is Being Removed from Certain Tier 4 Interim Machines {108F, 1335, 1408, 7490}
2011/11/02
2011/11/02
A New Routing Is Used on Fuel Injector Wiring Harnesses on C9.3 Machine Engines {1290, 1408, 1900}
2011/12/23
2011/12/23
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>®</SUP> Product {1463}
2014/03/04
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
A New Electronic Control Module (ECM) Cover Is Now Used For Certain C9.3 Machine Engines {1408}
A New Electronic Control Module (ECM) Cover Is Now Used For Certain C9.3 Machine Engines {1408}
A New Electronic Control Module (ECM) Cover Is Now Used For Certain C9.3 Machine Engines {1408}
A New Cab Harness Assembly for the Air Conditioner is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301, 7320}
A New Cab Harness Assembly for the Air Conditioner is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301, 7320}
A New Cab Harness Assembly for the Air Conditioner is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301, 7320}
New Cab Harness Routing Is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}
New Cab Harness Routing Is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}
New Cab Harness Routing Is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}
Updated Instructions for GRADE System Calibration and Measure-Up Procedure Are Now Used on Certain Excavators {7220}
Updated Instructions for GRADE System Calibration and Measure-Up Procedure Are Now Used on Certain Excavators {7220}
Updated Instructions for GRADE System Calibration and Measure-Up Procedure Are Now Used on Certain Excavators {7220}
