AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

362-8053 WIRING GP-CEM S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP PART OF 362-8782 MODULE AR-CLEAN EMISSIONS 336E


ELECTRICAL AND STARTING SYSTEM
WIRING GP

EXCAVATOR 336E EXCAVATOR CMR
 336E & 336E L Excavators CMR00001-UP (MACHINE) POWERED BY C9.3 Engine SEBP5672 336E CMR   (2011)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CAB
378-6947 WIRING GP-CAB
378-6948 WIRING GP-CAB
WIRING GP-CEM
362-8053 WIRING GP-CEM
WIRING GP-CEM
362-8054 WIRING GP-CEM
WIRING GP-CHASSIS
319-0881 WIRING GP-CHASSIS
WIRING GP-CHASSIS
319-0881 WIRING GP-CHASSIS
 

#SEBP56720470
 

362-8053: WIRING GP-CEM

362-8053 WIRING GP-CEM
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 362-8782 MODULE AR-CLEAN EMISSIONS
i04228067 SEBP5672
3628053 WIRING GP-CEM Parts scheme
  For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 267-4211 [1] SPACER (8.8X16X15-MM THK)  
2. 290-1993 [25] STRAP-CABLE  
3. 295-6237 [1] WIRE AS-IGNITION  
4. 315-0225 [1] CLAMP-WIRE  
5. 341-4176 [1] SENSOR GP-TEMPERATURE (DUAL SENSOR- DPF, FLAME DETECT)  
6. 342-9070 [1] RECEPTACLE AS (AFTERTREATMENT IDENTIFICATION)  
  281-8812 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
7. 347-9210 [4] SPACER (11X26X60-MM THK)  
8. 352-4755 [1] WIRE AS (NOZZLE HEATER)  
9. 362-8054 Y [1] WIRING GP-CEM  
10. 364-8334 [1] PLATE AS  
11. 225-3368 M [1] BOLT (M8X1.25X90-MM)  
12. 226-1388 [2] SPACER (9X20X10-MM THK)  
13. 285-6393 [3] CLIP  
14. 311-8366 [12] WASHER-HARD (8.8X16X2-MM THK)  
15. 338-8453 M [3] BOLT (M8X1.25X40-MM)  
16. 341-3624 [3] CLIP (LADDER)  
17. 344-1193 M [2] BOLT (M8X1.25X25-MM)  
18. 344-1194 M [3] BOLT (M8X1.25X80-MM)  
19. 344-1202 M [1] BOLT (M8X1.25X12-MM)  
20. 344-1206 M [1] BOLT (M6X1X16-MM)  
21. 8T-9405 M [1] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
22. 4P-5918 [1] CLIP  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56720471
 

362-8054: WIRING GP-CEM

362-8054 WIRING GP-CEM
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 362-8053 WIRING GP-CEM
i04228086 SEBP5672
3628054 WIRING GP-CEM Parts scheme
  For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [15] STRAP-CABLE  
2. 362-8055 [1] HARNESS AS-CEM (CLEAN EMISSIONS MODULE)  
  3E-6446 [1] CAP AS-CONNECTOR  
  110-6844 [1] SEAL  
  2L-8078 [1] TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW)  
  8T-8737 [23] PLUG-SEAL  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  9X-3402 [48] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [48] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9X-3401 [25] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [25] PIN-CONNECTOR (14-GA TO 16-GA)  
  1P-0810 E TAPE-ELECTRICAL (18-CM)  
  240-7876 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  240-7877 [1] PLUG AS-CONNECTOR (2-PIN)  
  264-7029 [1] SEAL-CONNECTOR  
  240-7878 [3] PLUG AS-CONNECTOR (3-PIN)  
    (EACH INCLUDES)
  264-7030 [1] SEAL-CONNECTOR  
  240-7879 [1] PLUG AS-CONNECTOR (3-PIN)  
  264-7030 [1] SEAL-CONNECTOR  
  261-0524 [1] PLUG AS-CONNECTOR (4-PIN)  
  264-7031 [1] SEAL-CONNECTOR  
  281-3119 [1] PLUG AS-CONNECTOR (3-PIN)  
  264-7030 [1] SEAL-CONNECTOR  
  281-3120 [1] PLUG AS-CONNECTOR (3-PIN)  
  264-7030 [1] SEAL-CONNECTOR  
  281-3125 [1] PLUG AS-CONNECTOR (4-PIN)  
  264-7031 [1] SEAL-CONNECTOR  
  281-3132 [1] PLUG AS-CONNECTOR (6-PIN)  
  264-7032 [1] SEAL-CONNECTOR  
  281-3134 [1] PLUG AS-CONNECTOR (6-PIN)  
  264-7032 [1] SEAL-CONNECTOR  
  281-3395 [1] PLUG AS-CONNECTOR (12-PIN)  
  264-7034 [1] SEAL-CONNECTOR  
  289-5150 E SLEEVE (151-CM)  
  317-1204 E SLEEVE (16-CM)  
  324-6267 [2] RECEPTACLE AS-CONNECTOR (40-PIN)  
  326-4516 [2] TIE-CABLE  
3. 363-7547 [1] PLATE  
  E   ORDER BY THE CENTIMETER
 

#SEBP56720472
 

319-0881: WIRING GP-CHASSIS

319-0881 WIRING GP-CHASSIS
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 335-0082 ELECTRICAL AR
Type 1
i04256903 SEBP5672
3190881 WIRING GP-CHASSIS Parts scheme
  For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 C [19] STRAP-CABLE  
2. 7K-1181 C [20] STRAP-CABLE  
3. 085-7329 [1] SPACER (9X19X30-MM THK)  
4. 111-4837 [2] CLIP  
5. 328-0377 [1] BRACKET AS  
6. 364-0240 C [1] HARNESS AS-CHASSIS (EXHAUST MODULE)  
  110-6845 [2] PLUG AS-CONNECTOR (40-PIN)  
    (EACH INCLUDES)
  110-6844 [1] SEAL  
  3S-2093 [5] STRAP-CABLE  
  8T-8737 [33] PLUG-SEAL  
  9W-0852 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)  
  9X-3402 [53] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [53] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  126-1768 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  2L-8069 [1] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  238-8245 [1] PLUG AS-CONNECTOR (2-PIN)  
  264-7029 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  281-8811 [1] PLUG AS-CONNECTOR (6-PIN)  
  264-7032 [1] SEAL-CONNECTOR  
  324-5678 [1] RESISTOR AS (120-OHM)  
  264-7029 [1] SEAL-CONNECTOR  
7. 4P-7581 C [1] CLIP (LADDER)  
8. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
9. 8T-4121 C [3] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
11. 8T-4137 CM [1] BOLT (M10X1.5X20-MM)  
12. 8T-6869 M [1] BOLT (M8X1.25X60-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP56720473
 

319-0881: WIRING GP-CHASSIS

319-0881 WIRING GP-CHASSIS
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 335-0082, 377-8140 ELECTRICAL AR
Type 2
i07505968 SEBP5672
3190881 WIRING GP-CHASSIS Parts scheme
  For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [19] STRAP-CABLE  
2. 7K-1181 [20] STRAP-CABLE  
3. 085-7329 [1] SPACER (9X19X30-MM THK)  
4. 111-4837 [2] CLIP  
5. 328-0377 [1] BRACKET AS  
6. 377-8096 C [1] HARNESS AS-CHASSIS (EXHAUST MODULE)  
  110-6845 [2] PLUG AS-CONNECTOR (40-PIN)  
    (EACH INCLUDES)
  110-6844 [1] SEAL  
  8T-8737 [32] PLUG-SEAL  
  9W-0852 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM)  
  9X-3402 [49] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [49] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  126-1768 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  2L-8069 [1] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  238-8245 [1] PLUG AS-CONNECTOR (2-PIN)  
  264-7029 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  324-5678 [1] RESISTOR AS (120-OHM)  
  264-7029 [1] SEAL-CONNECTOR  
7. 4P-7581 [1] CLIP (LADDER)  
8. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
9. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
11. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
12. 8T-6869 M [1] BOLT (M8X1.25X60-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP56720474
 

319-1188: WIRING GP-CHASSIS

319-1188 WIRING GP-CHASSIS -GRADE CONTROL
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 339-5196 GRADE CONTROL AR
AN ATTACHMENT
i04025975 SEBP5672
3191188 WIRING GP-CHASSIS Parts scheme 3191188 WIRING GP-CHASSIS Parts scheme
  For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [11] STRAP-CABLE  
2. 7K-1181 [26] STRAP-CABLE  
3. 111-4836 [1] CLIP  
4. 111-4837 [3] CLIP  
5. 360-6171 [1] HARNESS AS-CHASSIS  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)  
  3S-2093 [2] STRAP-CABLE  
  243-4509 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
  2L-8069 [1] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
  324-5678 [1] RESISTOR AS (120-OHM)  
  264-7029 [1] SEAL-CONNECTOR  
  230-4009 [2] PLUG AS-CONNECTOR (12-PIN)  
    (EACH INCLUDES)
  264-7034 [1] SEAL-CONNECTOR  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  243-4510 [1] RECEPTACLE AS-CONNECTOR (12-PIN)  
  253-2695 [1] PLUG AS-CONNECTOR  
  9X-3401 [23] PIN-CONNECTOR (16-GA TO 18-GA)  
  126-1768 [25] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  8T-8737 [3] PLUG-SEAL  
  262-8088 E HOSE (67-CM)  
6. 336-6351 [1] HARNESS AS-CONTROL  
  3S-2093 [2] STRAP-CABLE  
  8T-8737 [35] PLUG-SEAL  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(50-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  9X-3402 [8] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-3401 [15] PIN-CONNECTOR (16-GA TO 18-GA)  
  230-4009 [2] PLUG AS-CONNECTOR (12-PIN)  
    (EACH INCLUDES)
  264-7034 [1] SEAL-CONNECTOR  
  231-2295 [1] PLUG AS-CONNECTOR (8-PIN)  
  264-7033 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
  243-4510 [2] RECEPTACLE AS-CONNECTOR (12-PIN)  
  324-5678 [1] RESISTOR AS (120-OHM)  
  264-7029 [1] SEAL-CONNECTOR  
7. 336-6352 [1] BRACKET AS  
8. 350-8128 [1] BRACKET AS  
9. 4I-3953 [1] GROMMET  
10. 7Y-4529 [1] GROMMET  
11. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
14. 116-0118 [1] CLIP  
15. 7X-2621 M [1] BOLT (M10X1.5X12-MM)  
16. 4P-7581 [1] CLIP (LADDER)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP56720475
 

319-1197: WIRING GP-CHASSIS

319-1197 WIRING GP-CHASSIS -QUICK COUPLER
S/N KED1-UP; TEG1-UP; GTJ1-UP
PART OF 448-1172 CONTROL AR-QUICK COUPLER
AN ATTACHMENT
i04026057 SEBP5672
3191197 WIRING GP-CHASSIS Parts scheme
  For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 C [9] STRAP-CABLE  
2. 7K-1181 C [9] STRAP-CABLE  
3. 347-4734 [2] CLIP  
4. 350-8241 C [1] HARNESS AS-CHASSIS  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [11] PLUG-SEAL  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  230-4009 [1] PLUG AS-CONNECTOR (12-PIN)  
  264-7034 [1] SEAL-CONNECTOR  
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  264-7029 [1] SEAL-CONNECTOR  
5. 4P-7581 [2] CLIP (LADDER)  
6. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
8. 450-6306 [1] HARNESS AS-PUMP  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  455-0704 [1] SEAL-CONNECTOR  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
9. 116-0118 [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP56720476
 

319-1261: WIRING GP-CHASSIS

319-1261 WIRING GP-CHASSIS -CMB FCTN, HYD CONT, ELEC RLF
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 310-0432, 323-7872 CONTROL AR-AUXILIARY
AN ATTACHMENT
i04181949 SEBP5672
3191261 WIRING GP-CHASSIS Parts scheme
  For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [31] STRAP-CABLE  
2. 7K-1181 [10] STRAP-CABLE  
3. 204-1673 [6] STRAP-CABLE  
4. 342-2977 [1] HARNESS AS-CONTROL  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  9X-3402 [6] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  237-0227 [2] PLUG AS-CONNECTOR (3-PIN)  
    (EACH INCLUDES)
  264-7030 [1] SEAL-CONNECTOR  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
5. 350-8242 [1] HARNESS AS-CHASSIS  
  8T-8730 [19] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  8T-8737 [13] PLUG-SEAL  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  9X-3402 [10] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-4009 [2] PLUG AS-CONNECTOR (12-PIN)  
    (EACH INCLUDES)
  264-7034 [1] SEAL-CONNECTOR  
  230-4011 [3] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  230-5008 [1] PLUG AS-CONNECTOR (4-PIN)  
  264-7031 [1] SEAL-CONNECTOR  
  342-2972 [3] CAP-CONNECTOR (2-PIN)  
6. 4P-7581 [1] CLIP (LADDER)  
7. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
8. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP56720477
 

324-5820: WIRING GP-CHASSIS

324-5820 WIRING GP-CHASSIS -CAMERA
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 314-3612, 360-7207 CAMERA & MIRROR AR, 344-0797 INSTALLATION AR
AN ATTACHMENT
i04004548 SEBP5672
3245820 WIRING GP-CHASSIS Parts scheme
  For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [8] STRAP-CABLE  
2. 7K-1181 [10] STRAP-CABLE  
3. 111-4837 [2] CLIP  
4. 350-8239 [1] CABLE AS-COMMUNICATION (CAMERA)  
  347-0115 J CABLE (44-DM)  
5. 4P-7581 [2] CLIP (LADDER)  
6. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
8. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
  J   ORDER BY THE DECIMETER
  M   METRIC PART
 

#SEBP56720478
 

342-3033: WIRING GP-CHASSIS

342-3033 WIRING GP-CHASSIS -CMB FCTN, 1-WAY FLOW, HAMMER
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 314-3606, 331-7908 FILTER AR-HYDRAULIC
Type 1
AN ATTACHMENT
i04181272 SEBP5672
3423033 WIRING GP-CHASSIS Parts scheme
  For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [35] STRAP-CABLE  
2. 7K-1181 [10] STRAP-CABLE  
3. 177-2215 [6] STRAP-DUAL CLAMP  
4. 342-2977 [1] HARNESS AS-CONTROL  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  9X-3402 [6] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  237-0227 [2] PLUG AS-CONNECTOR (3-PIN)  
  264-7030 [1] SEAL-CONNECTOR  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
5. 350-8242 [1] HARNESS AS-CHASSIS  
  8T-8730 [19] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  8T-8737 [13] PLUG-SEAL  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  9X-3402 [10] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-4009 [2] PLUG AS-CONNECTOR (12-PIN)  
    (EACH INCLUDES)
  264-7034 [1] SEAL-CONNECTOR  
  230-4011 [3] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  230-5008 [1] PLUG AS-CONNECTOR (4-PIN)  
  264-7031 [1] SEAL-CONNECTOR  
  342-2972 [3] CAP-CONNECTOR (2-PIN)  
6. 4P-7581 [1] CLIP (LADDER)  
7. 4P-7582 [1] CLIP (LADDER)  
8. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
9. 8T-4190 M [1] BOLT (M16X2X25-MM)  
10. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
11. 9X-8257 [1] WASHER (17.5X30X3.5-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP56720479
 

342-3033: WIRING GP-CHASSIS

342-3033 WIRING GP-CHASSIS -CMB FCTN, 1-WAY FLOW, HAMMER
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 314-3606, 331-7908 FILTER AR-HYDRAULIC
Type 2
AN ATTACHMENT
i04671214 SEBP5672
3423033 WIRING GP-CHASSIS Parts scheme
  For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 C [36] STRAP-CABLE  
2. 7K-1181 C [9] STRAP-CABLE  
3. 177-2215 [6] STRAP-DUAL CLAMP  
4. 342-2977 [1] HARNESS AS-CONTROL  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  9X-3402 [6] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  237-0227 [2] PLUG AS-CONNECTOR (3-PIN)  
  264-7030 [1] SEAL-CONNECTOR  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
5. 350-8242 [1] HARNESS AS-CHASSIS  
  8T-8730 [19] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  8T-8737 [13] PLUG-SEAL  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  9X-3402 [10] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-4009 [2] PLUG AS-CONNECTOR (12-PIN)  
    (EACH INCLUDES)
  264-7034 [1] SEAL-CONNECTOR  
  230-4011 [3] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  230-5008 [1] PLUG AS-CONNECTOR (4-PIN)  
  264-7031 [1] SEAL-CONNECTOR  
  342-2972 [3] CAP-CONNECTOR (2-PIN)  
6. 4P-7581 [1] CLIP (LADDER)  
8. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
10. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Battery or Battery Cable - Inspect/Replace
336E Excavator
Battery - Recycle
336E Excavator
Fuses - Replace
336E Excavator
Power Receptacle - If Equipped
336E Excavator
Battery Disconnect Switch
336E Excavator
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for the 417-4689 Hydraulic Lines Kit on Certain Hydraulic Excavators{1408, 5057, 5479}
Installation Procedure for the 417-4689 Hydraulic Lines Kit on Certain Hydraulic Excavators{1408, 5057, 5479}
Replacing the DPF Delta Pressure Sensor Lines and ARD Air Pressure Sensor Lines on 336E Excavators, 568 Excavators, and 336E Mobile Hydraulic Power Units{108D, 1408, 1439}
Replacing the DPF Delta Pressure Sensor Lines and ARD Air Pressure Sensor Lines on 336E Excavators, 568 Excavators, and 336E Mobile Hydraulic Power Units{108D, 1408, 1439}
Installation Procedure for Warning Beacon on Certain E-Series Excavators {1408, 1431, 7301}
Installation Procedure for Warning Beacon on Certain E-Series Excavators {1408, 1431, 7301}
Updating the NOx Reduction System Delta Pressure Sensor on Certain C9.3 Through C32 Engines {1408, 191N}
Updating the NOx Reduction System Delta Pressure Sensor on Certain C9.3 Through C32 Engines {1408, 191N}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Installation Procedure for the <NOBR>462-1661</NOBR> Coupler Control Ar on Certain Hydraulic Excavators {1408, 5057, 7301, 7405, 7557}
Installation Procedure for the 462-1661 Coupler Control Ar on Certain Hydraulic Excavators {1408, 5057, 7301, 7405, 7557}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Failure of Temperature Sensor Gp in Clean Emissions Module on certain Cat<SUP>&reg;</SUP> Products{108D, 1408, 1919}
Failure of Temperature Sensor Gp in Clean Emissions Module on certain Cat® Products{108D, 1408, 1919}
Specifications
Electronic Unit Injector Wiring
C9.3 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
Service Letter-Asia
Systems Operation
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
Testing and Adjusting
Wiring Harness (Open Circuit) - Test
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
Wiring Harness (Short Circuit) - Test
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
Electrical Connector - Inspect
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
Electric Starting System - Test
C9.3 Engines for Caterpillar Built Machines
System Schematic
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
Connector Contact Description
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators
Overload Warning - Set - If Equipped
336E Excavator Hydraulic System
System Schematic
Machine Security System (MSS3i) Integrated
Troubleshooting
Electrical Component and Connector Locations
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
MID 299, 96-4
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
MID 299, 96-9
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
MID 299, 600-4
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
MID 299, 600-9
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
MID 299, 2300-9
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System
Disassembly and Assembly
Inlet Manifold Pressure Sensor - Remove and Install
C9.3
Engines for Caterpillar Built Machines
Service Magazine
An Improved Design of the Battery and Wiring Gp is Now Used on Certain 336E and 349E Excavators {1402, 1408}
2011/08/10
RF Soot Sensor System Is Being Removed from Certain Tier 4 Interim Machines {108F, 1335, 1408, 7490}
2011/11/02
A New Routing Is Used on Fuel Injector Wiring Harnesses on C9.3 Machine Engines {1290, 1408, 1900}
2011/12/23
A New Unit Injector Wiring Group Is Used on Certain C9.3 Machine Engines {1290, 1408}
2012/09/13
A New NOx Reduction System Delta Pressure Sensor Is Now Used on Certain C9.3 through C32 ACERT Engines {1052, 1058, 1408, 1718, 1907, 1912, 1916, 1917, 1923, 1924, 1925, 3175, 4351, 4352, 7400, 7494}
2014/02/03
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
New Cable Straps Are Used on the Aftertreatment Sensors of Certain C9.3 Through C18 Machine Engines {1408, 1900}
2015/05/01
A New Antenna Assembly is Now Available for the ROPS on Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}
2014/11/19
Rework Procedure is Available to Replace a Cab Harness Connector to Match the Harness Connector of a Field Installed Product Link Kit on Certain E Series and F Series Excavators {1408, 7301}
2014/11/17
A New Cat Grade Control Harness Routing is Now Available for Certain Excavators with Cat Grade Control Configurations {1408}
2015/07/27
A New Special Instruction is Available for Troubleshooting the Upper Window Wiper Relay Circuit on Certain 311D-349D, E Series, and F Series Excavators {1408, 7305}
2015/08/07
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
A New Electronic Control Module (ECM) Cover Is Now Used For Certain C9.3 Machine Engines {1408}
A New Electronic Control Module (ECM) Cover Is Now Used For Certain C9.3 Machine Engines {1408}
A New Cab Harness Assembly for the Air Conditioner is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301, 7320}
A New Cab Harness Assembly for the Air Conditioner is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301, 7320}
New Cab Harness Routing Is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}
New Cab Harness Routing Is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}
Updated Instructions for GRADE System Calibration and Measure-Up Procedure Are Now Used on Certain Excavators {7220}
Updated Instructions for GRADE System Calibration and Measure-Up Procedure Are Now Used on Certain Excavators {7220}

Caterpillar Parts SIS Catalog 336E :

378-6948 WIRING GP-CAB
WIRING GP-CAB
378-6947 WIRING GP-CAB
WIRING GP-CAB
328-0103 WIRING GP-CAB
WIRING GP-CAB
328-0054 WIRING GP-CAB
WIRING GP-CAB
327-9961 WIRING GP-CAB
WIRING GP-CAB
324-5819 WIRING GP-CAB
WIRING GP-CAB
319-1189 WIRING GP-CAB
WIRING GP-CAB
319-1189 WIRING GP-CAB
WIRING GP-CEM
362-8054 WIRING GP-CEM
WIRING GP-CHASSIS
319-0881 WIRING GP-CHASSIS
WIRING GP-CHASSIS
319-0881 WIRING GP-CHASSIS
WIRING GP-CHASSIS
319-1188 WIRING GP-CHASSIS
WIRING GP-CHASSIS
319-1197 WIRING GP-CHASSIS
WIRING GP-CHASSIS
319-1261 WIRING GP-CHASSIS
WIRING GP-CHASSIS
324-5820 WIRING GP-CHASSIS
WIRING GP-CHASSIS
342-3033 WIRING GP-CHASSIS

Truck sale:

Caterpillar 336E
 
Caterpillar 336E
- Crawler Excavators
ZIEGLER CAT
Caterpillar 336E, Crawler Excavators, Construction
67,500 
Caterpillar 336E, Crawler Excavators, Construction
- Crawler Excavators
ZIEGLER CAT
Caterpillar 336E, Crawler Excavators, Construction
117,460 
Caterpillar 336E, Crawler Excavators, Construction
- Crawler Excavators
TOROMONT CAT
Caterpillar 336E, Crawler Excavators, Construction
117,756 
Caterpillar 336E, Crawler Excavators, Construction
- Crawler Excavators
FINNING CANADA
Caterpillar 336EW, Crawler Excavators, Construction
325,000 
Caterpillar 336EW, Crawler Excavators, Construction
- Crawler Excavators
RING POWER CORP.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.