377-8135 WIRING GP-CHASSIS S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP PART OF 349-2261, 349-2262 CONTROL AR-AUXILIARY AN ATTACHMENT 336E

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 377-8135 WIRING GP-
1. 377-8136 WIRING GP-
2. 416-1813 WIRING GP-
3. 319-0885 WIRING GP-
4. 319-0885 WIRING GP-
5. 328-0023 WIRING GP-
6. 369-0146 WIRING GP-
7. 319-0880 WIRING GP-
8. 324-5724 WIRING GP-
9. 324-5726 WIRING GP-
0. INFORMATION

EXCAVATOR 336E EXCAVATOR CMR
336E & 336E L Excavators CMR00001-UP (MACHINE) POWERED BY C9.3 Engine SEBP5672 336E CMR (2011)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

342-3033 WIRING GP-CHASSIS

377-8135 WIRING GP-CHASSIS

377-8136 WIRING GP-CHASSIS

416-1813 WIRING GP-CHASSIS

319-0885 WIRING GP-COMMUNICATION

#SEBP56720480

377-8135: WIRING GP-CHASSIS

WIRING GP-CHASSIS

377-8135 WIRING GP-CHASSIS
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 349-2261, 349-2262 CONTROL AR-AUXILIARY
AN ATTACHMENT

i04629493 SEBP5672

For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[35]	STRAP-CABLE
2.	7I-2673	[1]	STRAP-CABLE
3.	7K-1181	[10]	STRAP-CABLE
4.	204-1611	[1]	STRAP (DUAL)
5.	177-2215	[1]	STRAP-DUAL CLAMP
6.	350-8242	[1]	HARNESS AS-CHASSIS
	8T-8730	[19]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[13]	PLUG-SEAL
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	9X-3402	[10]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4009	[2]	PLUG AS-CONNECTOR (12-PIN)
			(EACH INCLUDES)
	264-7034	[1]	SEAL-CONNECTOR
	230-4011	[3]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	264-7031	[1]	SEAL-CONNECTOR
	342-2972	[3]	CAP-CONNECTOR (2-PIN)
7.	369-0172	[1]	HARNESS AS-SENSOR
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	9X-3402	[6]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	237-0227	[2]	PLUG AS-CONNECTOR (3-PIN)
			(EACH INCLUDES)
	264-7030	[1]	SEAL-CONNECTOR
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
8.	4P-7581	[1]	CLIP (LADDER)
9.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
10.	8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP56720481

377-8136: WIRING GP-CHASSIS

WIRING GP-CHASSIS

377-8136 WIRING GP-CHASSIS
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 376-9638, 376-9639 FILTER AR-HYDRAULIC
AN ATTACHMENT

i04631315 SEBP5672

For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[41]	STRAP-CABLE
2.	7I-2673	[1]	STRAP-CABLE
3.	7K-1181	[9]	STRAP-CABLE
4.	204-1611	[1]	STRAP (DUAL)
5.	177-2215	[1]	STRAP-DUAL CLAMP
6.	350-8242	[1]	HARNESS AS-CHASSIS
	8T-8730	[19]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[3]	STRAP-CABLE
	8T-8737	[13]	PLUG-SEAL
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	9X-3402	[10]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	2L-8079	[1]	TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
	230-4009	[2]	PLUG AS-CONNECTOR (12-PIN)
			(EACH INCLUDES)
	264-7034	[1]	SEAL-CONNECTOR
	230-4011	[3]	PLUG AS-CONNECTOR (2-PIN)
			(EACH INCLUDES)
	264-7029	[1]	SEAL-CONNECTOR
	230-5008	[1]	PLUG AS-CONNECTOR (4-PIN)
	264-7031	[1]	SEAL-CONNECTOR
	342-2972	[3]	CAP-CONNECTOR (2-PIN)
7.	369-0172	[1]	HARNESS AS-SENSOR
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	9X-3402	[6]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-3401	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	237-0227	[2]	PLUG AS-CONNECTOR (3-PIN)
			(EACH INCLUDES)
	264-7030	[1]	SEAL-CONNECTOR
	243-4507	[1]	RECEPTACLE AS-CONNECTOR (4-PIN)
8.	4P-7581	[1]	CLIP (LADDER)
9.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
10.	8T-4199 M	[1]	BOLT (M8X1.25X12-MM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP56720482

416-1813: WIRING GP-CHASSIS

WIRING GP-CHASSIS

416-1813 WIRING GP-CHASSIS
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
TO ENABLE ENGINE ECM TO CHANGE TO PWM CONTROL
FIELD INSTALLATION

i04939638 SEBP5672

For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
415-9728	[1]	HARNESS AS-CHASSIS
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
9X-3402	[1]	SOCKET-CONNECTOR (16-GA TO 18-GA)
9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
243-4505	[1]	RECEPTACLE AS-CONNECTOR (2-PIN)
230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
264-7029	[1]	SEAL-CONNECTOR
8T-8737	[2]	PLUG-SEAL
7K-1181	[1]	STRAP-CABLE
E		ORDER BY THE CENTIMETER

#SEBP56720483

319-0885: WIRING GP-COMMUNICATION

WIRING GP-COMMUNICATION

319-0885 WIRING GP-COMMUNICATION -MACHINE SECURITY SYSTEM
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 337-8363 INSTALLATION GP-SECURITY
Type 1
AN ATTACHMENT

i04029418 SEBP5672

3190885 WIRING GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[2]	STRAP-CABLE
2.	328-0391 Y	[1]	SWITCH GP-START (ENGINE, KEY)
3.	350-8490 Y	[1]	HARNESS AS-POWER (MACHINE SECURITY SYSTEM)
4.	353-1910	[1]	COVER
5.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
6.	8C-7581 M	[2]	SCREW-MACHINE (M4X0.7X8-MM)
7.	205-0826	[1]	FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP56720484

319-0885: WIRING GP-COMMUNICATION

WIRING GP-COMMUNICATION

319-0885 WIRING GP-COMMUNICATION -MACHINE SECURITY SYSTEM
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 337-8363 INSTALLATION GP-SECURITY
Type 2
AN ATTACHMENT

i07048025 SEBP5672

For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[3]	STRAP-CABLE
2.	328-0391 Y	[1]	SWITCH GP-START (ENGINE, KEY)
3.	350-8490 Y	[1]	HARNESS AS-POWER (MACHINE SECURITY SYSTEM)
4.	353-1910	[1]	COVER
5.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
6.	8C-7581 M	[2]	SCREW-MACHINE (M4X0.7X8-MM)
7.	205-0826	[1]	FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP56720485

328-0023: WIRING GP-COMMUNICATION

WIRING GP-COMMUNICATION

328-0023 WIRING GP-COMMUNICATION -PRODUCT LINK
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 337-8360 CONTROL AR-COMMUNICATION
AN ATTACHMENT

i04186909 SEBP5672

3280023 WIRING GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[3]	STRAP-CABLE
2.	336-5907	[1]	HARNESS AS-CONTROL (PRODUCT LINK)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[2]	STRAP-CABLE
	8T-8737	[3]	PLUG-SEAL
	110-9198	[5]	PLUG-SEAL
	9X-3401	[7]	PIN-CONNECTOR (16-GA TO 18-GA)
	243-4510	[1]	RECEPTACLE AS-CONNECTOR (12-PIN)
	275-6785	[1]	PLUG AS-CONNECTOR (14-PIN)
4.	4P-7581	[1]	CLIP (LADDER)
5.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
6.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
	M		METRIC PART

#SEBP56720486

369-0146: WIRING GP-COMMUNICATION

WIRING GP-COMMUNICATION

369-0146 WIRING GP-COMMUNICATION -MACHINE SECURITY SYSTEM
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 366-8683 INSTALLATION GP-SECURITY
AN ATTACHMENT

i04415391 SEBP5672

3690146 WIRING GP-COMMUNICATION Parts scheme

For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[3]	STRAP-CABLE
2.	328-0391 Y	[1]	SWITCH GP-START (ENGINE, KEY)
3.	350-8490 Y	[1]	HARNESS AS-POWER (MACHINE SECURITY SYSTEM)
4.	363-9619	[1]	COVER
5.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
6.	8C-7581 M	[2]	SCREW-MACHINE (M4X0.7X8-MM)
7.	205-0826	[1]	FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP56720487

319-0880: WIRING GP-CONSOLE

WIRING GP-CONSOLE

319-0880 WIRING GP-CONSOLE
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 350-8399 CONTROL & MONITOR GP-CAB

i04011232 SEBP5672

For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
324-5724 Y	[1]	WIRING GP-CONSOLE (LH)
324-5726 Y	[1]	WIRING GP-CONSOLE (RH)
Y		SEPARATE ILLUSTRATION

#SEBP56720488

324-5724: WIRING GP-CONSOLE

WIRING GP-CONSOLE

324-5724 WIRING GP-CONSOLE -LH
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 319-0880 WIRING GP-CONSOLE

i04011371 SEBP5672

For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[1]	STRAP-CABLE
2.	7K-1181	[2]	STRAP-CABLE
3.	324-5725	[1]	HARNESS AS-CONSOLE
	8T-8730	[10]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	3S-2093	[6]	STRAP-CABLE
	7Y-3963	[2]	TERMINAL-BULLET (FEMALE)
	8T-8737	[2]	PLUG-SEAL
	9W-0844	[4]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	119-3662 BE		TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM)
	125-7874 BE		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	9X-3402	[11]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	230-4011	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	231-2295	[1]	PLUG AS-CONNECTOR (8-PIN)
	264-7033	[1]	SEAL-CONNECTOR
	238-8245	[1]	PLUG AS-CONNECTOR (2-PIN)
	264-7029	[1]	SEAL-CONNECTOR
	239-7352	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	342-2972	[2]	CAP-CONNECTOR (2-PIN)
	342-2974	[1]	CAP-CONNECTOR (6-PIN)
4.	324-5732	[1]	BRACKET
5.	9X-2042 M	[2]	SCREW-TRUSS HEAD (M6X1X12-MM)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP56720489

324-5726: WIRING GP-CONSOLE

WIRING GP-CONSOLE

324-5726 WIRING GP-CONSOLE -RH
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 319-0880 WIRING GP-CONSOLE

i04011376 SEBP5672

For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[2]	STRAP-CABLE
2.	324-5727	[1]	HARNESS AS-CONSOLE
	3S-2093	[4]	STRAP-CABLE
	7Y-3963	[2]	TERMINAL-BULLET (FEMALE)
	7Y-3965	[2]	TUBE (RECEPTACLE TERMINAL)
	8T-8737	[2]	PLUG-SEAL
	125-7875 BE		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
	9X-3402	[6]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-3401	[6]	PIN-CONNECTOR (16-GA TO 18-GA)
	239-7352	[1]	PLUG AS-CONNECTOR (6-PIN)
	264-7032	[1]	SEAL-CONNECTOR
	243-4509	[1]	RECEPTACLE AS-CONNECTOR (8-PIN)
	342-2974	[1]	CAP-CONNECTOR (6-PIN)
3.	324-5732	[1]	BRACKET
4.	9X-2042 M	[2]	SCREW-TRUSS HEAD (M6X1X12-MM)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Operation and Maintenance Manual

Battery or Battery Cable - Inspect/Replace
336E Excavator

Battery - Recycle
336E Excavator

Fuses - Replace
336E Excavator

Power Receptacle - If Equipped
336E Excavator

Battery Disconnect Switch
336E Excavator

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}

Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}

Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}

Installation Procedure for the 417-4689 Hydraulic Lines Kit on Certain Hydraulic Excavators{1408, 5057, 5479}
Installation Procedure for the 417-4689 Hydraulic Lines Kit on Certain Hydraulic Excavators{1408, 5057, 5479}

Replacing the DPF Delta Pressure Sensor Lines and ARD Air Pressure Sensor Lines on 336E Excavators, 568 Excavators, and 336E Mobile Hydraulic Power Units{108D, 1408, 1439}
Replacing the DPF Delta Pressure Sensor Lines and ARD Air Pressure Sensor Lines on 336E Excavators, 568 Excavators, and 336E Mobile Hydraulic Power Units{108D, 1408, 1439}

Installation Procedure for Warning Beacon on Certain E-Series Excavators {1408, 1431, 7301}
Installation Procedure for Warning Beacon on Certain E-Series Excavators {1408, 1431, 7301}

Updating the NOx Reduction System Delta Pressure Sensor on Certain C9.3 Through C32 Engines {1408, 191N}
Updating the NOx Reduction System Delta Pressure Sensor on Certain C9.3 Through C32 Engines {1408, 191N}

DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}

Installation Procedure for the 462-1661 Coupler Control Ar on Certain Hydraulic Excavators {1408, 5057, 7301, 7405, 7557}
Installation Procedure for the 462-1661 Coupler Control Ar on Certain Hydraulic Excavators {1408, 5057, 7301, 7405, 7557}

Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Failure of Temperature Sensor Gp in Clean Emissions Module on certain Cat® Products{108D, 1408, 1919}
Failure of Temperature Sensor Gp in Clean Emissions Module on certain Cat^® Products{108D, 1408, 1919}

Specifications

Electronic Unit Injector Wiring
C9.3 Engines for Caterpillar Built Machines

Tool Operating Manual

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Service Letter-China

Service Letter-Asia

Systems Operation

Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Service Letter-APD

Testing and Adjusting

Wiring Harness (Open Circuit) - Test
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Wiring Harness (Short Circuit) - Test
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Electrical Connector - Inspect
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Electric Starting System - Test
C9.3 Engines for Caterpillar Built Machines

System Schematic
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Connector Contact Description
Cat^® Grade Control Depth & Slope for E-Series and F-Series Excavators

Overload Warning - Set - If Equipped
336E Excavator Hydraulic System

System Schematic
Machine Security System (MSS3i) Integrated

Troubleshooting

Electrical Component and Connector Locations
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 299, 96-4
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 299, 96-9
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 299, 600-4
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 299, 600-9
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

MID 299, 2300-9
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Electronic Control System

Disassembly and Assembly

Inlet Manifold Pressure Sensor - Remove and Install
C9.3
Engines for Caterpillar Built Machines

Service Magazine

An Improved Design of the Battery and Wiring Gp is Now Used on Certain 336E and 349E Excavators {1402, 1408}
2011/08/10

RF Soot Sensor System Is Being Removed from Certain Tier 4 Interim Machines {108F, 1335, 1408, 7490}
2011/11/02

A New Routing Is Used on Fuel Injector Wiring Harnesses on C9.3 Machine Engines {1290, 1408, 1900}
2011/12/23

A New Unit Injector Wiring Group Is Used on Certain C9.3 Machine Engines {1290, 1408}
2012/09/13

A New NOx Reduction System Delta Pressure Sensor Is Now Used on Certain C9.3 through C32 ACERT Engines {1052, 1058, 1408, 1718, 1907, 1912, 1916, 1917, 1923, 1924, 1925, 3175, 4351, 4352, 7400, 7494}
2014/02/03

Parts are Now Available to Make Jump Start Receptacle on Cat® Product {1463}
2014/03/04

New Cable Straps Are Used on the Aftertreatment Sensors of Certain C9.3 Through C18 Machine Engines {1408, 1900}
2015/05/01

A New Antenna Assembly is Now Available for the ROPS on Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}
2014/11/19

Rework Procedure is Available to Replace a Cab Harness Connector to Match the Harness Connector of a Field Installed Product Link Kit on Certain E Series and F Series Excavators {1408, 7301}
2014/11/17

A New Cat Grade Control Harness Routing is Now Available for Certain Excavators with Cat Grade Control Configurations {1408}
2015/07/27

A New Special Instruction is Available for Troubleshooting the Upper Window Wiper Relay Circuit on Certain 311D-349D, E Series, and F Series Excavators {1408, 7305}
2015/08/07

Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

A New Electronic Control Module (ECM) Cover Is Now Used For Certain C9.3 Machine Engines {1408}
A New Electronic Control Module (ECM) Cover Is Now Used For Certain C9.3 Machine Engines {1408}

A New Cab Harness Assembly for the Air Conditioner is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301, 7320}
A New Cab Harness Assembly for the Air Conditioner is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301, 7320}

New Cab Harness Routing Is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}
New Cab Harness Routing Is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}

Updated Instructions for GRADE System Calibration and Measure-Up Procedure Are Now Used on Certain Excavators {7220}
Updated Instructions for GRADE System Calibration and Measure-Up Procedure Are Now Used on Certain Excavators {7220}

Caterpillar Parts SIS Catalog 336E :

342-3033 WIRING GP-CHASSIS

324-5820 WIRING GP-CHASSIS

319-1261 WIRING GP-CHASSIS

319-1197 WIRING GP-CHASSIS

319-1188 WIRING GP-CHASSIS

319-0881 WIRING GP-CHASSIS

377-8136 WIRING GP-CHASSIS

416-1813 WIRING GP-CHASSIS

319-0885 WIRING GP-COMMUNICATION

328-0023 WIRING GP-COMMUNICATION

369-0146 WIRING GP-COMMUNICATION

319-0880 WIRING GP-CONSOLE

324-5724 WIRING GP-CONSOLE

Truck sale:

Caterpillar 336E
- Crawler Excavators
ZIEGLER CAT

67,500

Caterpillar 336E, Crawler Excavators, Construction
- Crawler Excavators
ZIEGLER CAT

117,460

Caterpillar 336E, Crawler Excavators, Construction
- Crawler Excavators
TOROMONT CAT

117,756

Caterpillar 336E, Crawler Excavators, Construction
- Crawler Excavators
FINNING CANADA

325,000

Caterpillar 336EW, Crawler Excavators, Construction
- Crawler Excavators
RING POWER CORP.