AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

357-9766 CYLINDER GP-BUCKET S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP 150-MM (5.9-IN) BORE X 1151-MM (45.3-IN) STROKE PART OF 357-9765 CYLINDER & SEAL GP-BUCKET AN ATTACHMENT 336E


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP

EXCAVATOR 336E EXCAVATOR CMR
 336E & 336E L Excavators CMR00001-UP (MACHINE) POWERED BY C9.3 Engine SEBP5672 336E CMR   (2011)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-BOOM
358-5972 CYLINDER GP-BOOM
CYLINDER GP-BUCKET
326-0415 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
357-9766 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
357-9784 CYLINDER GP-BUCKET
CYLINDER GP-COUPLER
294-8011 CYLINDER GP-COUPLER
CYLINDER GP-COUPLER
303-0703 CYLINDER GP-COUPLER
 

#SEBP56720740
 

357-9766: CYLINDER GP-BUCKET

357-9766 CYLINDER GP-BUCKET
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
150-MM (5.9-IN) BORE X 1151-MM (45.3-IN) STROKE
PART OF 357-9765 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT
i03974291 SEBP5672
3579766 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4695 M [1] LOCKNUT (M80X2-THD)  
2. 165-9290 J [1] SEAL-LIP TYPE  
3. 188-4217 J [2] RING  
4. 188-4218 J [1] RING  
5. 357-9767 [1] CYLINDER AS  
5A. 290-9180 [1] BUSHING  
6. 357-9776 [1] ROD AS  
6A. 228-5617 [1] BUSHING  
7. 358-8523 [1] PISTON  
8. 358-8524 [1] HEAD  
9. 095-1633 J [1] SEAL-O-RING  
10. 114-0760 [1] BUSHING  
11. 324-6438 J [1] SEAL-BUFFER  
12. 324-6439 J [1] SEAL-U-CUP  
13. 7Y-4669 J [1] RING-BACKUP  
14. 7Y-4672 [1] RING-RETAINING  
15. 7Y-4673 J [1] RING-BACKUP  
16. 7Y-5215 M [8] BOLT-SOCKET HEAD (M24X3X90-MM)  
17. 495-8212 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  518-5138 J [1] KIT-SEAL (BUCKET CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP56720741
 

357-9784: CYLINDER GP-BUCKET

357-9784 CYLINDER GP-BUCKET
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
160-MM (6.3-IN) BORE X 1356-MM (53.4-IN) STROKE
PART OF 357-9783 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT
i03972810 SEBP5672
3579784 CYLINDER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 123-2112 M [1] LOCKNUT-SPECIAL (M90X2-THD)  
2. 357-9785 [1] CYLINDER AS  
2A. 290-9182 [1] BUSHING  
3. 357-9794 [1] ROD AS  
3A. 087-5548 [1] BUSHING  
4. 358-8527 [1] PISTON  
5. 358-8528 [1] HEAD  
6. 087-5550 J [1] RING-BACKUP  
7. 095-1635 J [1] SEAL-O-RING  
8. 114-0762 [1] BUSHING  
9. 165-9291 J [1] SEAL-LIP TYPE  
10. 185-0230 J [2] RING  
11. 185-0231 J [1] RING  
12. 333-8687 J [1] SEAL-BUFFER  
13. 333-8688 J [1] SEAL-U-CUP  
14. 7Y-4941 J [1] RING-BACKUP  
15. 7Y-4944 [1] RING-RETAINING  
16. 7Y-5239 M [8] BOLT-SOCKET HEAD (M24X3X100-MM)  
17. 506-2321 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  518-5136 J [1] KIT-SEAL (BUCKET CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP56720742
 

294-8011: CYLINDER GP-COUPLER

294-8011 CYLINDER GP-COUPLER
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
88.9-MM (3.5-IN) BORE X 165.1-MM (6.5-IN) STROKE
PART OF 318-7130 COUPLER GP-QUICK
AN ATTACHMENT
i03900878 SEBP5672
2948011 CYLINDER GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 9F-2167 [1] SCREW-PURGE (3/8-24X1.164-IN)  
3. 339-3730 J [1] VALVE-COUNTERBALANCE  
4. [1] BEARING  
5. [2] BUSHING  
6. [1] PISTON  
7. 346-5594 [1] HEAD  
8. 346-5595 [1] ROD AS  
9. 346-5596 [1] TUBE AS  
10. 3F-7147 [12] BOLT (1/2-13X1.5-IN)  
11. 4B-9808 [3] SETSCREW (1/4-20X0.5-IN)  
12. 9S-8002 [4] PLUG (7/16-20-THD)  
13. 9S-8004 [1] PLUG (9/16-18-THD)  
   
    AVAILABLE REPAIR KIT(S):
  346-0643 [1] KIT-SEAL (COUPLER CYLINDER)  
    (INCLUDES WIPER, DOUBLE LIP SEAL, WEAR-RING, O-RING, BACK-UP RING, PISTON RING SET, & CAST IRON PISTON RING)
  161-1980 J [1] KIT-SERVICE (COUNTERBALANCE VALVE)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP56720743
 

303-0703: CYLINDER GP-COUPLER

303-0703 CYLINDER GP-COUPLER
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
139.7-MM (5.5-IN) BORE X 193-MM (7.6-IN) STROKE
PART OF 292-4153 COUPLER GP-QUICK
AN ATTACHMENT
i03832793 SEBP5672
3030703 CYLINDER GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 9F-2167 [1] SCREW-PURGE (3/8-24X1.164-IN)  
3. 346-5597 [1] BEARING  
4. 346-5598 [2] BUSHING  
5. 346-5599 [1] PISTON  
6. 346-5600 [1] HEAD  
7. 346-5601 [1] ROD AS  
8. 346-5602 [1] TUBE AS  
9. 346-6711 J [1] VALVE AS-COUNTERBALANCE  
10. 180-8475 [12] BOLT-SOCKET HEAD (3/4-10X2.25-IN)  
11. 3B-8601 [3] SETSCREW-SOCKET (3/8-16X0.5-IN)  
12. 9S-8002 [4] PLUG (7/16-20-THD)  
13. 9S-8004 [1] PLUG (9/16-18-THD)  
   
    AVAILABLE REPAIR KIT(S):
  346-0644 [1] KIT-SEAL (COUPLER CYLINDER)  
    (INCLUDES WIPER SEAL, DOUBLE LIP SEAL, WEAR RING, O-RING, BACK-UP RING, PISTON RING SET & PISTON RING)
  161-1980 J [1] KIT-SERVICE (COUNTERBALANCE VALVE)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP56720744
 

388-9752: CYLINDER GP-COUPLER

388-9752 CYLINDER GP-COUPLER -DB-LINKAGE
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
76.2-MM (3-IN) BORE X 185.4-MM (7.3-IN) STROKE
PART OF 486-5372, 486-5374 COUPLER GP-QUICK
AN ATTACHMENT
i05689951 SEBP5672
3889752 CYLINDER GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 237-0947 J [1] VALVE GP-CHECK (PILOT OPERATED)  
2. 3J-1907 [1] SEAL-O-RING  
3. 3J-7354 [1] SEAL-O-RING  
4. 9S-8002 [1] PLUG (7/16-20-THD)  
5. 9S-8004 [1] PLUG (9/16-18-THD)  
6. 9F-2167 [1] SCREW-PURGE (3/8-24X1.164-IN)  
   
    AVAILABLE REPAIR KIT(S):
  453-6520 [1] KIT-PACKING (COUPLER CYLINDER)  
    (INCLUDES O-RINGS, BACK-UP RINGS, DUST SEAL, BP SEAL & POLYPAK SEAL)
  213-8433 J [1] KIT-SEAL (CHECK VALVE)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP56720745
 

357-4703: CYLINDER GP-STICK

357-4703 CYLINDER GP-STICK
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
170-MM (6.7-IN) BORE X 1738-MM (68.4-IN) STROKE
PART OF 357-4702 CYLINDER & SEAL GP-STICK
AN ATTACHMENT
i03972532 SEBP5672
3574703 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4956 JM [1] LOCKNUT (M90X2-THD)  
2. 103-8345 [1] RING-RETAINING  
3. 107-6579 [1] RING  
4. 191-5644 [1] BUSHING  
5. 191-5648 J [1] SEAL-LIP TYPE  
6. 231-6843 J [1] RING-SEAL  
7. 324-9484 J [1] SEAL-BUFFER  
8. 324-9486 J [1] SEAL-U-CUP  
9. 357-4704 [1] CYLINDER AS  
9A. 290-9183 [1] BUSHING  
10. 357-4713 [1] ROD AS  
10A. 290-9183 [1] BUSHING  
11. 358-8525 [1] PISTON  
12. 358-8526 [1] HEAD  
13. 359-7188 [1] STOP  
14. 359-7192 [1] STOP  
15. 095-0930 [2] RING-RETAINING (EXTERNAL)  
16. 095-1726 J [1] SEAL-O-RING  
17. 191-5604 [2] RING  
18. 191-5605 [1] RING  
19. 191-5643 [1] RING-RETAINING  
20. 191-5647 J [1] RING-BACKUP  
21. 7Y-4945 [1] RING-BACKUP  
22. 7Y-5239 M [8] BOLT-SOCKET HEAD (M24X3X100-MM)  
23. 9X-3607 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  319-8295 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP56720746
 

375-1722: CYLINDER GP-STICK

375-1722 CYLINDER GP-STICK
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
170-MM (6.7-IN) BORE X 1738-MM (68.4-IN) STROKE
PART OF 357-4702 CYLINDER & SEAL GP-STICK
AN ATTACHMENT
i05071650 SEBP5672
3751722 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4956 M [1] LOCKNUT (M90X2-THD)  
2. 103-8345 [1] RING-RETAINING  
3. 107-6579 [1] RING  
4. 191-5644 [1] BUSHING  
5. 191-5648 J [1] SEAL-LIP TYPE  
6. 231-6843 J [1] RING-SEAL  
7. 324-9484 J [1] SEAL-BUFFER  
8. 324-9486 J [1] SEAL-U-CUP  
9. 357-4704 [1] CYLINDER AS  
9A. 290-9183 [1] BUSHING  
10. 357-4713 [1] ROD AS  
10A. 290-9183 [1] BUSHING  
11. 358-8525 [1] PISTON  
12. 375-1723 [1] HEAD  
13. 359-7188 [1] STOP  
14. 359-7192 [1] STOP  
15. 095-0930 [2] RING-RETAINING (EXTERNAL)  
16. 140-0240 J [1] SEAL-O-RING  
17. 191-5604 J [2] RING  
18. 191-5605 J [1] RING  
19. 191-5643 [1] RING-RETAINING  
20. 191-5647 J [1] RING-BACKUP  
21. 375-1732 J [2] RING-BACKUP  
22. 7Y-5239 M [8] BOLT-SOCKET HEAD (M24X3X100-MM)  
23. 506-2322 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  518-5137 J [1] KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP56720747
 

315-4440: DRIVE & MTG GP-AUXILIARY PUMP

315-4440 DRIVE & MTG GP-AUXILIARY PUMP
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
PART OF 325-8920 PUMP & MTG GP-AUXILIARY
AN ATTACHMENT
i03993332 SEBP5672
3154440 DRIVE & MTG GP-AUXILIARY PUMP Parts scheme
  For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 236-6919 [2] SEAL-O-RING  
2. 334-9958 [1] COUPLING  
3. 334-9959 [1] SPACER  
4. 8T-4648 M [2] BOLT (M12X1.75X70-MM)  
5. 2L-6726 [1] RING-RETAINING  
  M   METRIC PART
 

#SEBP56720748
 

319-2785: DRIVE & MTG GP-SWING

319-2785 DRIVE & MTG GP-SWING
S/N KED1-259; TEG1-191; GTJ1-148; CMR1-228
PART OF 296-6335, 296-6336 POWER TRAIN AR
i03997102 SEBP5672
3192785 DRIVE & MTG GP-SWING Parts scheme
  For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7561 [2] CORK  
2. 5D-1026 [1] CLAMP-BAND  
3. 096-4755 [1] PIN  
4. 333-2958 Y [1] DRIVE GP-SWING (WITH MOTOR)  
5. 447-1726 M [23] BOLT (M24X3X70-MM)  
6. 451-2177 [23] WASHER-HARD (26X44X4-MM THK)  
7. 5P-0767 E HOSE (90-CM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56720749
 

319-2785: DRIVE & MTG GP-SWING

319-2785 DRIVE & MTG GP-SWING
S/N KED260-UP; TEG192-UP; GTJ149-UP; CMR229-UP
PART OF 296-6335, 296-6336 POWER TRAIN AR
i06574285 SEBP5672
3192785 DRIVE & MTG GP-SWING Parts scheme
  For full view, you need register

Parts for your 336E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-7561 [2] CORK  
2. 5D-1026 [1] CLAMP-BAND  
3. 096-4755 [1] PIN  
4. 447-2485 CY [1] DRIVE GP-SWING (WITH MOTOR)  
5. 461-3882 M [23] BOLT (M24X3X70-MM)  
6. 6V-8237 [23] WASHER (26X44X4-MM THK)  
7. 5P-0767 E HOSE (90-CM)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Installation Procedure for the <NOBR>362-5261</NOBR> Stick Lines Group on Certain Hydraulic Excavators {5057, 5458}
Installation Procedure for the 362-5261 Stick Lines Group on Certain Hydraulic Excavators {5057, 5458}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE POSITION SENSING BUCKET CYLINDER ON CERTAIN 320E, 323E/F, 325F, 336D/E/F, 345D, 349D/D2, 349E/F, AND 352F EXCAVATORS, EQUIPPED WITH CAT GRADE CONTROL APPLICATION
PRODUCT SUPPORT PROGRAM FOR REPLACING THE POSITION SENSING BUCKET CYLINDER ON CERTAIN 320E, 323E/F, 325F, 336D/E/F, 345D, 349D/D2, 349E/F, AND 352F EXCAVATORS, EQUIPPED WITH CAT GRADE CONTROL APPLICATION
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Low Cycle Cylinder Rod Breaks on Certain Excavators and Mobile Hydraulic Power Units{7562}
Low Cycle Cylinder Rod Breaks on Certain Excavators and Mobile Hydraulic Power Units{7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE POSITION SENSING BUCKET CYLINDER ON CERTAIN 320E, 323E/F, 325F, 336D/E/F, 345D, 349D/D2, 349E/F, AND 352F EXCAVATORS, EQUIPPED WITH CAT GRADE CONTROL APPLICATION
PRODUCT SUPPORT PROGRAM FOR REPLACING THE POSITION SENSING BUCKET CYLINDER ON CERTAIN 320E, 323E/F, 325F, 336D/E/F, 345D, 349D/D2, 349E/F, AND 352F EXCAVATORS, EQUIPPED WITH CAT GRADE CONTROL APPLICATION
Service Letter-Asia
Systems Operation
Cylinders (Boom, Stick and Bucket)
336E Excavator Hydraulic System
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE POSITION SENSING BUCKET CYLINDER ON CERTAIN 320E, 323E/F, 325F, 336D/E/F, 345D, 349D/D2, 349E/F, AND 352F EXCAVATORS, EQUIPPED WITH CAT GRADE CONTROL APPLICATION
PRODUCT SUPPORT PROGRAM FOR REPLACING THE POSITION SENSING BUCKET CYLINDER ON CERTAIN 320E, 323E/F, 325F, 336D/E/F, 345D, 349D/D2, 349E/F, AND 352F EXCAVATORS, EQUIPPED WITH CAT GRADE CONTROL APPLICATION
Testing and Adjusting
Cylinder Drift - Check - Empty Bucket
336E Excavator Hydraulic System
Cylinder Drift - Check - Loaded Bucket
336E Excavator Hydraulic System
Cylinder Speed - Check
336E Excavator Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Cylinder - Remove and Install
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Stick Cylinder - Remove and Install
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Boom Cylinder - Remove and Install
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Load Control Valve (Stick Cylinder) - Remove and Install
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Manual Valve (Boom Lowering) - Remove and Install
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Service Magazine
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
New Cylinder Head Bolts are Now Used on Certain Excavators {5456, 5457, 5458}
2015/06/17
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Remanufactured Hydraulic Rods and Cylinders for Certain Cat Machines {7562}
2015/08/21
New Cylinder Head Bolts are Now Used on Certain Excavators {5457, 5458}
New Cylinder Head Bolts are Now Used on Certain Excavators {5457, 5458}
A New Position Sensing Bucket Cylinder Is Now Available for Certain 320E, 323E, 323F, 325F, and 336D/E/F Excavators {5457}
A New Position Sensing Bucket Cylinder Is Now Available for Certain 320E, 323E, 323F, 325F, and 336D/E/F Excavators {5457}

Caterpillar Parts SIS Catalog 336E :

CYLINDER GP-BUCKET
326-0415 CYLINDER GP-BUCKET
CYLINDER GP-BOOM
358-5972 CYLINDER GP-BOOM
CYLINDER & SEAL GP-STICK
357-4702 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-STICK
357-4702 CYLINDER & SEAL GP-STICK
CYLINDER & SEAL GP-BUCKET
357-9783 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BUCKET
357-9765 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BUCKET
326-0414 CYLINDER & SEAL GP-BUCKET
CYLINDER & SEAL GP-BOOM
358-5971 CYLINDER & SEAL GP-BOOM
CYLINDER GP-BUCKET
357-9784 CYLINDER GP-BUCKET
CYLINDER GP-COUPLER
294-8011 CYLINDER GP-COUPLER
CYLINDER GP-COUPLER
303-0703 CYLINDER GP-COUPLER
CYLINDER GP-COUPLER
388-9752 CYLINDER GP-COUPLER
CYLINDER GP-STICK
357-4703 CYLINDER GP-STICK
CYLINDER GP-STICK
375-1722 CYLINDER GP-STICK
DRIVE & MTG GP-AUXILIARY PUMP
315-4440 DRIVE & MTG GP-AUXILIARY PUMP
DRIVE & MTG GP-SWING
319-2785 DRIVE & MTG GP-SWING

Truck sale:

Caterpillar 336E
 
Caterpillar 336E
- Crawler Excavators
ZIEGLER CAT
Caterpillar 336E, Crawler Excavators, Construction
67,500 
Caterpillar 336E, Crawler Excavators, Construction
- Crawler Excavators
ZIEGLER CAT
Caterpillar 336E, Crawler Excavators, Construction
117,460 
Caterpillar 336E, Crawler Excavators, Construction
- Crawler Excavators
TOROMONT CAT
Caterpillar 336E, Crawler Excavators, Construction
117,756 
Caterpillar 336E, Crawler Excavators, Construction
- Crawler Excavators
FINNING CANADA
Caterpillar 336EW, Crawler Excavators, Construction
325,000 
Caterpillar 336EW, Crawler Excavators, Construction
- Crawler Excavators
RING POWER CORP.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.