WORK TOOLS
BUCKET GPWORK TOOLS
BUCKET GP#SEBP56721100
441-6083: BUCKET AR-HEAVY DUTY
441-6083 BUCKET AR-HEAVY DUTY -DB-FAMILY
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
1450-MM (57-IN) WIDE X 1.40-CU M (1.83-CU YD) CAPACITY
AN ATTACHMENT
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
1450-MM (57-IN) WIDE X 1.40-CU M (1.83-CU YD) CAPACITY
AN ATTACHMENT
For full view, you need register
Parts for your 336E EXCAVATOR:
CATERPILLAR SIS#SEBP56721101
442-1785: BUCKET AR-HEAVY DUTY
442-1785 BUCKET AR-HEAVY DUTY -DB-FAMILY
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
1500-MM (59-IN) WIDE X 1.5-CU M (1.96-CU YD) CAPACITY
AN ATTACHMENT
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
1500-MM (59-IN) WIDE X 1.5-CU M (1.96-CU YD) CAPACITY
AN ATTACHMENT
For full view, you need register
Parts for your 336E EXCAVATOR:
CATERPILLAR SIS#SEBP56721102
229-8037: BUCKET AR-MASS EXCAVATION
229-8037 BUCKET AR-MASS EXCAVATION -DB-FAMILY
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
1780-MM (70-IN) WIDE X 1.9-CU M (2.5-CU YD) CAPACITY
AN ATTACHMENT
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
1780-MM (70-IN) WIDE X 1.9-CU M (2.5-CU YD) CAPACITY
AN ATTACHMENT
For full view, you need register
Parts for your 336E EXCAVATOR:
CATERPILLAR SIS#SEBP56721103
239-2704: BUCKET AR-MASS EXCAVATION
239-2704 BUCKET AR-MASS EXCAVATION -DB-FAMILY
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
1538-MM (61-IN) WIDE X 1.6-CU M (2.1-CU YD) CAPACITY
AN ATTACHMENT
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
1538-MM (61-IN) WIDE X 1.6-CU M (2.1-CU YD) CAPACITY
AN ATTACHMENT
For full view, you need register
Parts for your 336E EXCAVATOR:
CATERPILLAR SIS#SEBP56721104
229-7841: BUCKET AS-EXCAVATION
229-7841 BUCKET AS-EXCAVATION -TB-FAMILY
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
1628-MM (64-IN) WIDE X 2.0-CU M (2.6-CU YD) CAPACITY. J-460 ADAPTERS, QTY OF 5
PART OF 229-7840 BUCKET & ADJUSTER GP
AN ATTACHMENT
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
1628-MM (64-IN) WIDE X 2.0-CU M (2.6-CU YD) CAPACITY. J-460 ADAPTERS, QTY OF 5
PART OF 229-7840 BUCKET & ADJUSTER GP
AN ATTACHMENT
For full view, you need register
Parts for your 336E EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 229-7842 | [1] | EDGE AS | |
| 1A. | 159-0464 | [3] | ADAPTER-TIP (J-460, 2-STRAP, CENTER) | |
| 1B. | 159-0465 | [1] | ADAPTER-TIP (J-460, 2-STRAP, RH) | |
| 1C. | 159-0466 | [1] | ADAPTER-TIP (J-460, 2-STRAP, LH) | |
| 1D. | 8P-9770 | [1] | PLATE | |
| 2. | 229-7739 | [1] | PLATE-WEAR | |
| 3. | 229-7740 | [2] | PLATE-WEAR | |
| 4. | 229-7741 | [2] | PLATE-WEAR |
#SEBP56721105
229-7877: BUCKET AS-EXCAVATION
229-7877 BUCKET AS-EXCAVATION -TB-FAMILY
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
1325-MM (52-IN) WIDE X 1.6-CU M (2.1-CU YD) CAPACITY. J-460 ADAPTERS, QTY OF 4
PART OF 229-7876 BUCKET & ADJUSTER GP
AN ATTACHMENT
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
1325-MM (52-IN) WIDE X 1.6-CU M (2.1-CU YD) CAPACITY. J-460 ADAPTERS, QTY OF 4
PART OF 229-7876 BUCKET & ADJUSTER GP
AN ATTACHMENT
For full view, you need register
Parts for your 336E EXCAVATOR:
CATERPILLAR SIS#SEBP56721106
229-7890: BUCKET AS-EXCAVATION
229-7890 BUCKET AS-EXCAVATION -TB-FAMILY
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
1525-MM (60-IN) WIDE X 1.9-CU M (2.5-CU YD) CAPACITY. J-460 ADAPTERS, QTY OF 5
PART OF 229-7889 BUCKET & ADJUSTER GP
AN ATTACHMENT
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
1525-MM (60-IN) WIDE X 1.9-CU M (2.5-CU YD) CAPACITY. J-460 ADAPTERS, QTY OF 5
PART OF 229-7889 BUCKET & ADJUSTER GP
AN ATTACHMENT
For full view, you need register
Parts for your 336E EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 229-7897 | [1] | PLATE AS-HINGE | |
| 2. | 2C-9259 | [2] | PLATE-IDENTIFICATION (CAT) | |
| 3. | 229-7754 | [2] | PLATE-WEAR | |
| 4. | 229-7894 | [2] | PLATE-WEAR | |
| 5. | 229-7893 | [2] | PLATE-WEAR | |
| 6. | 229-7892 | [1] | PLATE-REINFORCEMENT | |
| 7. | 229-7895 | [1] | EDGE AS | |
| 7A. | 153-1695 | [5] | ADAPTER (J-460) | |
| 7B. | 8P-9770 | [1] | PLATE |
#SEBP56721107
229-8030: BUCKET AS-EXCAVATION
229-8030 BUCKET AS-EXCAVATION -DB-FAMILY
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
1500-MM (59-IN) WIDE X 1.4-CU M (1.8-CU YD) CAPACITY. J-460 ADAPTERS, QTY OF 5
PART OF 229-8029 BUCKET & ADJUSTER GP
AN ATTACHMENT
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
1500-MM (59-IN) WIDE X 1.4-CU M (1.8-CU YD) CAPACITY. J-460 ADAPTERS, QTY OF 5
PART OF 229-8029 BUCKET & ADJUSTER GP
AN ATTACHMENT
For full view, you need register
Parts for your 336E EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 239-2428 | [1] | EDGE AS | |
| 1A. | 159-0466 | [1] | ADAPTER-TIP (J-460, 2-STRAP, LH) | |
| 1B. | 159-0464 | [3] | ADAPTER-TIP (J-460, 2-STRAP, CENTER) | |
| 1C. | 159-0465 | [1] | ADAPTER-TIP (J-460, 2-STRAP, RH) | |
| 1D. | 8P-9770 | [1] | PLATE | |
| 2. | [1] | PLATE AS-BOX | ||
| 3. | [2] | PLATE-WEAR | ||
| 4. | 239-2560 | [4] | PLATE-WEAR | |
| 5. | 239-2559 | [1] | PLATE-REINFORCEMENT | |
| 6. | 2C-9259 | [2] | PLATE-IDENTIFICATION (CAT) | |
#SEBP56721108
229-8033: BUCKET AS-EXCAVATION
229-8033 BUCKET AS-EXCAVATION -DB-FAMILY
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
1585-MM (62-IN) WIDE X 1.5-CU M (2-CU YD) CAPACITY. J-460 ADAPTERS, QTY OF 5
PART OF 229-8032 BUCKET & ADJUSTER GP
FOR USE WITH PIN-ON DESIGN
AN ATTACHMENT
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
1585-MM (62-IN) WIDE X 1.5-CU M (2-CU YD) CAPACITY. J-460 ADAPTERS, QTY OF 5
PART OF 229-8032 BUCKET & ADJUSTER GP
FOR USE WITH PIN-ON DESIGN
AN ATTACHMENT
For full view, you need register
Parts for your 336E EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 239-2879 | [1] | EDGE AS | |
| 1A. | 8P-9770 | [1] | PLATE | |
| 1B. | 159-0464 | [3] | ADAPTER-TIP (J-460, 2-STRAP, CENTER) | |
| 1C. | 159-0465 | [1] | ADAPTER-TIP (J-460, 2-STRAP, RH) | |
| 1D. | 159-0466 | [1] | ADAPTER-TIP (J-460, 2-STRAP, LH) | |
| 2. | 239-2877 | [1] | PLATE-WEAR | |
| 3. | 229-7794 | [4] | PLATE-WEAR | |
| 4. | 2C-9259 | [2] | PLATE-IDENTIFICATION (CAT) |
#SEBP56721109
239-2700: BUCKET AS-EXCAVATION
239-2700 BUCKET AS-EXCAVATION -DB-FAMILY
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
1472-MM (58-IN) WIDE X 1.2-CU M (1.8-CU YD) CAPACITY. J-400 ADAPTERS, QTY OF 5
PART OF 239-2699 BUCKET & ADJUSTER GP
AN ATTACHMENT
S/N KED1-UP; TEG1-UP; GTJ1-UP; CMR1-UP
1472-MM (58-IN) WIDE X 1.2-CU M (1.8-CU YD) CAPACITY. J-400 ADAPTERS, QTY OF 5
PART OF 239-2699 BUCKET & ADJUSTER GP
AN ATTACHMENT
For full view, you need register
Parts for your 336E EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2C-9259 | [2] | PLATE-IDENTIFICATION (CAT) | |
| 2. | 239-2758 | [1] | EDGE AS | |
| 2A. | 6I-6405 | [1] | ADAPTER-TIP (J-400, 2-STRAP, RH) | |
| 2B. | 6I-6404 | [3] | ADAPTER-TIP (J-400, 2-STRAP, CENTER) | |
| 2C. | 6I-6406 | [1] | ADAPTER-TIP (J-400, 2-STRAP, LH) | |
| 2D. | 8P-9770 | [1] | PLATE | |
| 3. | 239-2591 | [3] | PLATE-WEAR | |
| 4. | 239-2590 | [1] | PLATE-REINFORCEMENT | |
| 5. | [2] | PLATE-WEAR | ||
Information:
WORK TOOLS
BUCKET GP
Operation and Maintenance Manual
Special Instruction
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Rework Procedures for the Excavator D and E-Series Buckets {0679, 6001}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Installation and Weld Procedure for Modular Shroud System on Base Edge of Certain 320 through 390 Excavator Buckets {6001}
Procedure for Installation and Removal of Cat<SUP>®</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>®</SUP> Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Disassembly and Assembly
Bucket - Remove and Install
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
336E Excavator and 336E MHPU Mobile Hydraulic Power Unit Machine Systems
Service Magazine
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
New K Series GET Adapters are Available on Certain Excavators and Wheel Loaders Buckets {6001, 6800, 6803}
