349E & 349E L Excavators FJB00001-UP (MACHINE) POWERED BY C13 Engine UNDERCARRIAGE Caterpillar SIS





Parts group 349E:

  For full view, you need register
UNDERCARRIAGE

Information:

(For parts list, see above)

Disassembly and Assembly
Track Adjuster - Disassemble
349E Excavator Machine Systems
Track Adjuster - Assemble
349E Excavator Machine Systems
Track Adjuster - Remove and Install
349E Excavator Machine Systems
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Undercarriage Reconditioning Bulletin
Reconditioning Dimensions for Idlers {4159}
Reconditioning Dimensions for Idlers {4159}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Hydraulic Excavator Idler Disassembly and Assembly Procedures {0729, 4159}
Hydraulic Excavator Idler Disassembly and Assembly Procedures {0729, 4159}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}
Idler Oil Fill Volume {4159, 4159}
Idler Oil Fill Volume {4159, 4159}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Disassembly and Assembly
Service Magazine
Preventing Track Roller & Idler Duo-Cone Seal Packing in Freeze-Thaw Conditions {4159, 4180}
Preventing Track Roller & Idler Duo-Cone Seal Packing in Freeze-Thaw Conditions {4159, 4180}
Undercarriage Reconditioning Bulletin
Shop Repair Procedure for Grease Lubricated Track {0729, 4169, 4170, 4175}
Shop Repair Procedure for Grease Lubricated Track {0729, 4169, 4170, 4175}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Procedure for Servicing Master Joints for (320 through 336) Hydraulic Excavators. {4169, 4171}
Procedure for Servicing Master Joints for (320 through 336) Hydraulic Excavators. {4169, 4171}
Shop Repair Procedures for Positive Pin Retention 2 (PPR2) Track. {0374, 0599, 0700, 0729, 4169, 4171}
Shop Repair Procedures for Positive Pin Retention 2 (PPR2) Track. {0374, 0599, 0700, 0729, 4169, 4171}
Reuse And Salvage Guidelines
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Undercarriage Reconditioning Bulletin
Field Service for Positive Pin Retention 2 (PPR 2) {4169, 4170, 4171, 4174, 4175, 4180}
Field Service for Positive Pin Retention 2 (PPR 2) {4169, 4170, 4171, 4174, 4175, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Hydraulic Excavator Roller Disassembly and Assembly Procedures {0729, 0768, 4154, 4180, 4181}
Hydraulic Excavator Roller Disassembly and Assembly Procedures {0729, 0768, 4154, 4180, 4181}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Carrier Roller Oil Fill Volume {4154}
Carrier Roller Oil Fill Volume {4154}
Reconditioning Dimensions for Track Rollers {4154, 4180}
Reconditioning Dimensions for Track Rollers {4154, 4180}
Carrier Roller Disassembly and Assembly Procedures {4154}
Carrier Roller Disassembly and Assembly Procedures {4154}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Disassembly and Assembly
Track Carrier Roller - Remove and Install
349E Excavator Machine Systems
Track Roller - Remove and Install
349E Excavator Machine Systems
Service Magazine
Preventing Track Roller & Idler Duo-Cone Seal Packing in Freeze-Thaw Conditions {4159, 4180}
Preventing Track Roller & Idler Duo-Cone Seal Packing in Freeze-Thaw Conditions {4159, 4180}
Undercarriage Reconditioning Bulletin
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Disassembly and Assembly
Operation and Maintenance Manual
Track Information
349E Excavator
Disassembly and Assembly
Recoil Spring - Disassemble
349E Excavator Machine Systems
Recoil Spring - Assemble
349E Excavator Machine Systems
Track Adjuster - Disassemble
349E Excavator Machine Systems
Track Adjuster - Assemble
349E Excavator Machine Systems
Track Adjuster - Remove and Install
349E Excavator Machine Systems
Service Magazine
Operation and Maintenance Manual
Track Information
349E Excavator
Special Instruction
Guidelines for Narrowing Track Shoe Width or Clipping Grouser Corners {4170}
Guidelines for Narrowing Track Shoe Width or Clipping Grouser Corners {4170}
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
Undercarriage Reconditioning Bulletin
Shop Repair Procedure for Grease Lubricated Track {0729, 4169, 4170, 4175}
Shop Repair Procedure for Grease Lubricated Track {0729, 4169, 4170, 4175}
Field Service for Positive Pin Retention 2 (PPR 2) {4169, 4170, 4171, 4174, 4175, 4180}
Field Service for Positive Pin Retention 2 (PPR 2) {4169, 4170, 4171, 4174, 4175, 4180}
Track Data Charts {0372, 0374, 4170}
Track Data Charts {0372, 0374, 4170}
Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}
Guideline for Reusable Track Parts {4169, 4170, 4171, 4174, 4175}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Servicing Equipment, Tooling, Literature, and Training Review {0374, 4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track Service Evaluation Checklist {4169, 4170, 4171, 4172, 4174, 4175, 4176}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Servicing Equipment, Tooling, Literature, and Training Review {0374, 0599, 4159, 4167, 7561}
Idler Service Evaluation Checklist {4159, 4167}
Idler Service Evaluation Checklist {4159, 4167}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Procedure for Servicing Master Joints for (320 through 336) Hydraulic Excavators. {4169, 4171}
Procedure for Servicing Master Joints for (320 through 336) Hydraulic Excavators. {4169, 4171}
Reuse And Salvage Guidelines
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Procedure for Replacement Grouser Bars {0679, 4172, 4173, 7950}
Service Magazine
An Improved Double Grouser Track Shoe is Now Used On Certain Excavators {4170}
An Improved Double Grouser Track Shoe is Now Used On Certain Excavators {4170}
Track Shoe Ice Lug Requirements {4170}
Track Shoe Ice Lug Requirements {4170}
Operation and Maintenance Manual
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BASE FRAME PAINT ON CERTAIN 311F-349D/E/F, 374F, AND 390E EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BASE FRAME PAINT ON CERTAIN 311F-349D/E/F, 374F, AND 390E EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Tool Operating Manual
150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}
150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BASE FRAME PAINT ON CERTAIN 311F-349D/E/F, 374F, AND 390E EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BASE FRAME PAINT ON CERTAIN 311F-349D/E/F, 374F, AND 390E EXCAVATORS
Service Letter-Asia
Undercarriage Reconditioning Bulletin
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Undercarriage Reconditioning Bulletin Contents {0374, 4150}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Foreword {0374, 4150, 7000, 7590, 7950}
Foreword {0374, 4150, 7000, 7590, 7950}
Introduction {0374, 4150, 7000, 7590, 7950}
Introduction {0374, 4150, 7000, 7590, 7950}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Reusability Recommendations for Duo-Cone Seals {7555, 7561}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Training Materials {0314, 0374, 4150}
Training Materials {0314, 0374, 4150}
Facility and Equipment Layouts {4150}
Facility and Equipment Layouts {4150}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Procedure and Guidelines for Cleaning Phosphate Coated Track Pins {4169, 4171, 7950}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Shop Repair Procedures for Positive Pin Retention 2 (PPR2) Track. {0374, 0599, 0700, 0729, 4169, 4171}
Shop Repair Procedures for Positive Pin Retention 2 (PPR2) Track. {0374, 0599, 0700, 0729, 4169, 4171}
Reuse And Salvage Guidelines
Facility and Equipment Layouts {4150}
Facility and Equipment Layouts {4150}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BASE FRAME PAINT ON CERTAIN 311F-349D/E/F, 374F, AND 390E EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE BASE FRAME PAINT ON CERTAIN 311F-349D/E/F, 374F, AND 390E EXCAVATORS
Disassembly and Assembly
Undercarriage Reconditioning Bulletin
Hydraulic Excavator Idler Disassembly and Assembly Procedures {0729, 4159}
Hydraulic Excavator Idler Disassembly and Assembly Procedures {0729, 4159}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Tool Operating Manual
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
Idler/Roller Assembly Machine{0374, 0599, 0729, 4159, 4180}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
168-7720 Ultrasonic Wear Indicator III Group{0374, 0599, 0729, 0787}
150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}
150T Track Repair Group Field Follow Tools, Operation, and Parts {0374, 0700, 0729, 4169, 4170, 4171}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
NEHS1249 100T Track Repair Group {0374, 0599, 0700, 0729, 4169, 4170}
Undercarriage Reconditioning Bulletin
Hydraulic Excavator Roller Disassembly and Assembly Procedures {0729, 0768, 4154, 4180, 4181}
Hydraulic Excavator Roller Disassembly and Assembly Procedures {0729, 0768, 4154, 4180, 4181}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Idler Weld Rebuild Procedure {0679, 0729, 4150, 4159}
Welding Wire and Flux {0679, 4150, 7950}
Welding Wire and Flux {0679, 4150, 7950}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Equipment and Tools for Undercarriage Rebuilding and Reconditioning Stations {0729, 4150}
Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950}
Suggested Equipment Layouts {0374, 0729, 4150, 7000, 7950}
Reconditioning Dimensions for Idlers {4159}
Reconditioning Dimensions for Idlers {4159}
Disassembly and Assembly
Special Instruction
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}

Truck sale:

 
Caterpillar 349E
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
 
Caterpillar 349E
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
 
Caterpillar 349E, Crawler Excavators, Construction
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
8,889 
675,000 
Caterpillar 349EW, Crawler Excavators, Construction
- Crawler Excavators
RING POWER CORP.