AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

362-1381 WIRING GP-ELECTRONIC CONTROL S/N TXM5483-UP; M4X1-UP PART OF 365-3524, 417-2599, 422-5494, 442-9567 ENGINE AR-COMPLETE Type 1 FOR USE WITH MOUNTING GP-BULKHEAD, CONTROL MOUNTING GP, INTERNAL HARNESS GP, WIRING GO-CONTROL (FUEL), SENSOR GP, MOUNTING GP-WIRING, DOWNWARD INLET ELBOW, WITH OR WITHOUT BRAKES CANNOT BE USED WITH UPWARD INLET ELBOW 349E


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 349E EXCAVATOR FJB
 349E & 349E L Excavators FJB00001-UP (MACHINE) POWERED BY C13 Engine SEBP5674 349E FJB   (2011)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CONVERTER
328-0247 WIRING GP-CONVERTER
WIRING GP-ELECTRONIC CONTROL
362-1381 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
362-1381 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
362-1381 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ENGINE
426-3720 WIRING GP-ENGINE
WIRING GP-PLATFORM
319-0878 WIRING GP-PLATFORM
 

#SEBP56740480
 

362-1381: WIRING GP-ELECTRONIC CONTROL

362-1381 WIRING GP-ELECTRONIC CONTROL
S/N TXM5483-UP; M4X1-UP
PART OF 365-3524, 417-2599, 422-5494, 442-9567 ENGINE AR-COMPLETE
Type 1
FOR USE WITH MOUNTING GP-BULKHEAD, CONTROL MOUNTING GP, INTERNAL HARNESS GP, WIRING GO-CONTROL (FUEL), SENSOR GP, MOUNTING GP-WIRING, DOWNWARD INLET ELBOW, WITH OR WITHOUT BRAKES
CANNOT BE USED WITH UPWARD INLET ELBOW
i06236268 SEBP5674
3621381 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 349E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 C [6] STRAP-CABLE  
2. 7K-1181 C [13] STRAP-CABLE  
3. 178-1781 [1] CLIP  
4. 206-1345 [1] STRAP-CABLE  
5. 206-1346 [1] STRAP-CABLE  
6. 229-8844 [1] CLIP  
7. 290-5562 C [4] MOUNT (DUAL SWIVEL)  
9. 347-3869 [1] CLIP  
10. 426-3720 Y [1] WIRING GP-ENGINE  
11. 132-5789 [1] CLIP (LADDER)  
12. 5P-7970 M [1] NUT (M8X1.25-THD)  
13. 5P-8245 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 6I-3812 M [1] BOLT (M8X1.25X16-MM)  
15. 6V-2317 M [2] BOLT (M8X1.25X30-MM)  
16. 6V-4249 M [1] BOLT (M10X1.5X50-MM)  
17. 6V-5215 M [3] BOLT (M8X1.25X16-MM)  
18. 6V-5217 M [4] BOLT (M8X1.25X20-MM)  
19. 6V-5696 M [1] BOLT (M12X1.75X80-MM)  
20. 6V-5839 [4] WASHER (11X21X2.5-MM THK)  
21. 6V-5842 M [2] BOLT (M10X1.5X40-MM)  
22. 6V-6317 M [1] BOLT (M10X1.5X20-MM)  
23. 9M-1974 [11] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56740481
 

362-1381: WIRING GP-ELECTRONIC CONTROL

362-1381 WIRING GP-ELECTRONIC CONTROL
S/N TXM5483-UP; M4X1-UP
PART OF 365-3524, 417-2599, 442-9567 ENGINE AR-COMPLETE
Type 2
FOR USE WITH MOUNTING GP-BULKHEAD, CONTROL MOUNTING GP, INTERNAL HARNESS GP, WIRING GO-CONTROL (FUEL), SENSOR GP, MOUNTING GP-WIRING, DOWNWARD INLET ELBOW, WITH OR WITHOUT BRAKES
CANNOT BE USED WITH UPWARD INLET ELBOW
i06558678 SEBP5674
3621381 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 349E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 132-5789 [1] CLIP (LADDER)  
2. 178-1781 [1] CLIP  
3. 206-1345 [1] STRAP-CABLE  
4. 206-1346 [1] STRAP-CABLE  
5. 229-8844 [1] CLIP  
6. 290-5562 [4] MOUNT (DUAL SWIVEL)  
7. 347-3869 [1] CLIP (LADDER)  
8. 3S-2093 [6] STRAP-CABLE  
9. 426-3719 CY [1] HARNESS AS-ENGINE  
10. 5P-7970 M [1] NUT (M8X1.25-THD)  
11. 5P-8245 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 6I-3812 M [1] BOLT (M8X1.25X16-MM)  
13. 6V-2317 M [2] BOLT (M8X1.25X30-MM)  
14. 6V-4249 M [1] BOLT (M10X1.5X50-MM)  
15. 6V-5215 M [1] BOLT (M8X1.25X16-MM)  
16. 6V-5217 M [6] BOLT (M8X1.25X20-MM)  
17. 6V-5696 M [1] BOLT (M12X1.75X80-MM)  
18. 6V-5839 [3] WASHER (11X21X2.5-MM THK)  
19. 6V-5842 M [1] BOLT (M10X1.5X40-MM)  
20. 6V-6317 M [1] BOLT (M10X1.5X20-MM)  
21. 7K-1181 [13] STRAP-CABLE  
22. 9M-1974 [11] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56740482
 

426-3720: WIRING GP-ENGINE

426-3720 WIRING GP-ENGINE
S/N TXM1-UP; M4X1-UP
PART OF 362-1381 WIRING GP-ELECTRONIC CONTROL
i05434550 SEBP5674
4263720 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 349E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 426-3719 Y [1] HARNESS AS-ENGINE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP56740483
 

319-0878: WIRING GP-PLATFORM

319-0878 WIRING GP-PLATFORM
S/N FJB1-UP; SPG1-UP; RGH1-UP; WHZ1-UP
PART OF 350-8399 CONTROL & MONITOR GP-CAB
i04011129 SEBP5674
3190878 WIRING GP-PLATFORM Parts scheme 3190878 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 349E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5169 [1] GUARD-SWITCH  
2. 3S-2093 [14] STRAP-CABLE  
3. 6S-4039 [1] GROMMET  
4. 7G-1060 [1] STRAP AS-GROUND  
5. 7K-1181 [5] STRAP-CABLE  
6. 111-4836 [7] CLIP  
7. 111-4837 [1] CLIP  
8. 116-0118 [6] CLIP  
9. 234-1122 [1] COVER  
10. 301-2981 [1] SWITCH AS-TOGGLE  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  112-4550 E SLEEVE (19-CM)  
  271-2178 [1] SWITCH AS-TOGGLE (SECONDARY SHUTDOWN)  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
11. 360-6291 [1] HARNESS AS-PLATFORM  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [15] STRAP-CABLE  
  8T-8737 [5] PLUG-SEAL  
  9W-0852 [8] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [5] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM)  
  9X-3402 [24] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  2L-8069 [3] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  9X-3401 [13] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-4011 [5] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  230-4013 [1] PLUG AS-CONNECTOR (3-PIN)  
  264-7030 [1] SEAL-CONNECTOR  
  230-5008 [1] PLUG AS-CONNECTOR (4-PIN)  
  264-7031 [1] SEAL-CONNECTOR  
  237-0227 [3] PLUG AS-CONNECTOR (3-PIN)  
    (EACH INCLUDES)
  264-7030 [1] SEAL-CONNECTOR  
  328-0076 [2] RECEPTACLE AS-CONNECTOR (12-PIN)  
  342-2972 [5] CAP-CONNECTOR (2-PIN)  
  342-2973 [4] CAP-CONNECTOR (3-PIN)  
  342-2978 [1] CAP-CONNECTOR (4-PIN)  
12. 319-1260 [2] PANEL  
13. 328-0077 [2] CAP  
14. 328-0119 [1] SHEET  
15. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
16. 132-5789 [3] CLIP (LADDER)  
18. 7X-2621 M [6] BOLT (M10X1.5X12-MM)  
19. 8T-0337 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
20. 8T-4121 [21] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
22. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
23. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
24. 204-1611 [1] STRAP (DUAL)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP56740484
 

349-6154: WIRING GP-SENSOR

349-6154 WIRING GP-SENSOR
S/N TXM1-UP; M4X1-UP
PROVIDE A WIRING GROUP WITH COOLANT TEMPERATURE HARNESS
PART OF 365-3524, 417-2599, 422-5494, 442-9567 ENGINE AR-COMPLETE
FOR USE WITH EXTERNAL HARNESS
i04292141 SEBP5674
3496154 WIRING GP-SENSOR Parts scheme
  For full view, you need register

Parts for your 349E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 290-1993 [2] STRAP-CABLE  
2. 349-7699 [1] BRACKET  
3. 101-3129 M [1] STUD (M10X1.5-THD)  
4. 362-1505 Y [1] HARNESS AS-SENSOR (COOLANT TEMPERATURE)  
5. 4P-7581 [1] CLIP (LADDER)  
6. 6V-5215 M [1] BOLT (M8X1.25X16-MM)  
7. 6V-5839 [1] WASHER (11X21X2.5-MM THK)  
8. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56740485
 

345-6734: WIRING GP-UNIT INJECTOR

345-6734 WIRING GP-UNIT INJECTOR
S/N TXM1-UP; M4X1-UP
PROVIDES A WIRING GP TO OPERATE MEUI-C INJECTORS. ALSO CONTAINS COOLANT TEMP PASS THROUGH WIRES.
PART OF 365-3524, 417-2599, 422-5494, 442-9567 ENGINE AR-COMPLETE
FOR USE WITH COOLANT TEMP JUMPER HARNESS
CANNOT BE USED WITH BRAKES AND/OR IVA
i04292142 SEBP5674
3456734 WIRING GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 349E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 418-2031 Y [1] HARNESS AS-ENGINE  
2. 208-9277 M [3] BOLT-FLANGE HEAD (M6X1X20-MM)  
3. 359-4892 [1] RING-RETAINING  
4. 359-4893 [1] RING-RETAINING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56740486
 

328-0249: WIRING GP-VALVE

328-0249 WIRING GP-VALVE
S/N FJB1-181; SPG1-196; RGH1-151; WHZ1-140
PART OF 335-0081 ELECTRICAL AR
i04267782 SEBP5674
3280249 WIRING GP-VALVE Parts scheme
  For full view, you need register

Parts for your 349E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [17] STRAP-CABLE  
2. 4I-7889 [2] SPACER (11X25X45-MM THK)  
3. 7K-1181 [9] STRAP-CABLE  
4. 111-4836 [1] CLIP  
5. 116-0118 [2] CLIP  
6. 204-1673 [3] STRAP-CABLE  
7. 364-0243 [1] HARNESS AS-VALVE  
  8T-8729 [10] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3401 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [6] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  264-7029 [1] SEAL-CONNECTOR  
  230-4013 [2] PLUG AS-CONNECTOR (3-PIN)  
    (EACH INCLUDES)
  264-7030 [1] SEAL-CONNECTOR  
  8T-8737 [6] PLUG-SEAL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  243-4508 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
  243-4510 [1] RECEPTACLE AS-CONNECTOR (12-PIN)  
  8T-8730 [14] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [6] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
8. 364-0244 [1] BRACKET AS-VALVE  
9. 132-5789 [6] CLIP (LADDER)  
10. 134-3299 [1] GROMMET  
11. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4123 [2] WASHER (22X35X3.5-MM THK)  
13. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
14. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
15. 8T-5005 M [1] BOLT (M10X1.5X70-MM)  
16. 8T-5460 M [2] BOLT (M20X2.5X40-MM)  
17. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP56740487
 

430-4645: WIRING GP-VALVE

430-4645 WIRING GP-VALVE
S/N FJB190-UP; SPG209-UP; RGH169-UP; WHZ143-UP
PART OF 432-7426 ELECTRICAL AR
i05537191 SEBP5674
4304645 WIRING GP-VALVE Parts scheme
  For full view, you need register

Parts for your 349E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-7889 [2] SPACER (11X25X45-MM THK)  
2. 111-4836 [1] CLIP  
3. 116-0118 [2] CLIP  
4. 266-7379 [1] STRAP-CABLE  
5. 427-0044 [1] HARNESS AS-VALVE  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [10] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [14] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [3] STRAP-CABLE  
  8T-8737 [2] PLUG-SEAL  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)  
  9X-3402 [16] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [16] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9X-3401 [10] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [10] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2270 [8] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  264-7029 [1] SEAL-CONNECTOR  
  230-4013 [2] PLUG AS-CONNECTOR (3-PIN)  
  237-0227 [2] PLUG AS-CONNECTOR (3-PIN)  
    (EACH PLUG AS INCLUDES)
  264-7030 [1] SEAL-CONNECTOR  
  243-4509 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
  243-4510 [1] RECEPTACLE AS-CONNECTOR (12-PIN)  
6. 427-0045 [1] BRACKET AS-VALVE  
7. 132-5789 [5] CLIP (LADDER)  
8. 134-3299 [1] GROMMET  
9. 204-1611 [4] STRAP (DUAL)  
10. 177-2215 [3] STRAP-DUAL CLAMP  
11. 3S-2093 [14] STRAP-CABLE  
12. 7K-1181 [10] STRAP-CABLE  
13. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
14. 451-2176 [2] WASHER-HARD (22X35X3.5-MM THK)  
15. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
16. 8T-4191 M [3] BOLT (M10X1.5X16-MM)  
17. 8T-5005 M [1] BOLT (M10X1.5X70-MM)  
18. 453-2845 M [2] BOLT (M20X2.5X40-MM)  
19. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
20. 269-7678 [1] CLIP  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP56740488
 

333-3036: DRIVE GP-FINAL

333-3036 DRIVE GP-FINAL -WITHOUT MOTOR
S/N FJB1-202; SPG1-239; RGH1-210; WHZ1-147
PART OF 353-0528 DRIVE GP-FINAL
FIELD REPLACEMENT ORDER @@@@@521-3847@@@@@, @@@@@521-3848@@@@@
i04316228 SEBP5674
3333036 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2R-0524 [2] CONE-BEARING  
2. 2R-0525 [2] CUP-BEARING  
3. 3E-2338 [2] PLUG-PIPE  
4. 4I-7576 [14] WASHER (66.3X104X3-MM THK)  
5. 7Y-0661 [3] SHAFT-PLANETARY  
6. 7Y-0662 [4] SHAFT-PLANETARY  
7. 199-4583 [11] BEARING AS  
8. 7Y-0808 B [1] SHIM (1.6-MM THK)  
9. 7Y-1469 [1] COUPLING  
10. 7Y-1470 [1] GEAR-SUN (21-TEETH)  
11. 7Y-1472 B [1] SHIM (0.15-MM THK)  
  7Y-1473 B [1] SHIM (0.3-MM THK)  
  7Y-1474 B [1] SHIM (0.4-MM THK)  
  7Y-1475 B [1] SHIM (0.5-MM THK)  
  7Y-1476 B [1] SHIM (0.6-MM THK)  
  7Y-1477 B [1] SHIM (0.7-MM THK)  
  7Y-1478 B [1] SHIM (0.8-MM THK)  
  7Y-1479 B [1] SHIM (1-MM THK)  
  7Y-1480 B [1] SHIM (1.6-MM THK)  
20. 7Y-1482 [1] CARRIER-PLANETARY  
21. 7Y-1483 [1] GEAR-RING (63-TEETH)  
22. 7Y-1485 [1] CARRIER-PLANETARY  
23. 7Y-1487 [1] GEAR-RING (85-TEETH)  
24. 7Y-1488 [1] CARRIER AS  
  7Y-0656 [3] SHAFT-PLANETARY  
25. 7Y-1491 [1] GEAR-SUN (21-TEETH)  
26. 7Y-1493 [1] SPACER (8.7X50X14-MM THK)  
27. 7Y-1495 [3] GEAR-PLANETARY (29-TEETH)  
28. 7Y-1498 [1] COVER  
29. 7Y-1499 [3] GEAR-PLANETARY (20-TEETH)  
30. 7Y-1504 [4] GEAR-PLANETARY (20-TEETH)  
31. 454-6929 M [20] BOLT (M24X3X190-MM)  
32. 110-7217 [2] RING-RETAINING  
33. 114-1541 [6] PIN-DOWEL  
34. 169-5559 [1] GEAR-SUN (26-TEETH)  
35. 199-4719 [1] GEAR-COUPLING  
36. 227-6048 [12] WASHER (26X40X4-MM THK)  
37. 255-2272 [1] SEAL GP-DUO-CONE  
38. 333-3033 [1] HOUSING-MOTOR  
39. 333-3034 [1] HOUSING-GEAR  
40. 333-3035 [1] PLATE  
41. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
42. 199-4582 [3] BEARING AS  
43. 095-0891 [7] PIN-SPRING  
44. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
45. 4S-5924 [1] SEAL-O-RING  
46. 6V-8133 M [12] BOLT (M24X3X80-MM)  
47. 6V-8200 M [20] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
48. 7M-8485 [2] SEAL-O-RING  
49. 7Y-1484 [1] SPACER (191X221X8.5-MM THK)  
50. 7Y-1492 [2] SPACER (67X101.1X10-MM THK)  
51. 8C-5240 [1] SEAL-O-RING  
52. 8T-3957 M [10] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
53. 451-2177 [20] WASHER-HARD (26X44X4-MM THK)  
54. 451-2182 [20] WASHER-HARD (13.5X25.5X3-MM THK)  
55. 8T-4240 [3] RING-RETAINING  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP56740489
 

353-0527: DRIVE GP-FINAL

353-0527 DRIVE GP-FINAL -WITH MOTOR, SPROCKET
S/N FJB1-202; SPG1-239; RGH1-210; WHZ1-147
PART OF 353-0525 FASTENER GP-FINAL DRIVE, 353-0526 FINAL DRIVE & MOUNTING GP
i04269576 SEBP5674
3530527 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 349E EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-6399 Y [1] SPROCKET GP (NON-SEGMENTED)  
2. 353-0528 Y [1] DRIVE GP-FINAL  
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Battery or Battery Cable - Inspect/Replace
349E Excavator
Battery - Recycle
349E Excavator
Fuses - Replace
349E Excavator
Power Receptacle - If Equipped
349E Excavator
Camera Harness - Disconnect and Connect
349E Excavator
Battery Disconnect Switch
349E Excavator
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Installation of the 336-6360 Cab Wiring Gp {1408}
Installation of the 336-6360 Cab Wiring Gp {1408}
Installation Procedure for the 328-0269 Chassis Wiring Gp {1408}
Installation Procedure for the 328-0269 Chassis Wiring Gp {1408}
Installation of the 342-3231 Chassis Wiring Gp {1408}
Installation of the 342-3231 Chassis Wiring Gp {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Warning Beacon on Certain E-Series Excavators {1408, 1431, 7301}
Installation Procedure for Warning Beacon on Certain E-Series Excavators {1408, 1431, 7301}
Updating the NOx Reduction System Delta Pressure Sensor on Certain C9.3 Through C32 Engines {1408, 191N}
Updating the NOx Reduction System Delta Pressure Sensor on Certain C9.3 Through C32 Engines {1408, 191N}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Installation of the 342-3232 Chassis Wiring Gp on Certain Hydraulic Excavators{1408}
Installation of the 342-3232 Chassis Wiring Gp on Certain Hydraulic Excavators{1408}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
New Procedure to Rework Fan Drive Group on Certain 349E, 349F, 349F XE, and 352F XE Excavators {1356, 1408, 7610, 7620}
New Procedure to Rework Fan Drive Group on Certain 349E, 349F, 349F XE, and 352F XE Excavators {1356, 1408, 7610, 7620}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Tool Operating Manual
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
Service Letter-Asia
Systems Operation
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines
Switches
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System
Sensors
349E, 349F and 352F Excavators and 349E MHPU Mobile Hydraulic Power Unit Tool Control System
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE AIR CONDITIONER GROUP ON CERTAIN E AND F SERIES EXCAVATORS
Testing and Adjusting
Connector Contact Description
Cat® Grade Control Depth & Slope for E-Series and F-Series Excavators
System Schematic
Machine Security System (MSS3i) Integrated
Service Magazine
RF Soot Sensor System Is Being Removed from Certain Tier 4 Interim Machines {108F, 1335, 1408, 7490}
2011/11/02
A New NOx Reduction System Delta Pressure Sensor Is Now Used on Certain C9.3 through C32 ACERT Engines {1052, 1058, 1408, 1718, 1907, 1912, 1916, 1917, 1923, 1924, 1925, 3175, 4351, 4352, 7400, 7494}
2014/02/03
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
A New Improved Removal and Installation of the Injector Harness Procedure is Now Used on Certain C13, C15 and C18 Engines {1251, 1408}
2014/08/25
A New Antenna Assembly is Now Available for the ROPS on Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}
2014/11/19
Rework Procedure is Available to Replace a Cab Harness Connector to Match the Harness Connector of a Field Installed Product Link Kit on Certain E Series and F Series Excavators {1408, 7301}
2014/11/17
A New Special Instruction is Available for Troubleshooting the Upper Window Wiper Relay Circuit on Certain 311D-349D, E Series, and F Series Excavators {1408, 7305}
2015/08/07
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
A New Cab Harness Assembly for the Air Conditioner is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301, 7320}
A New Cab Harness Assembly for the Air Conditioner is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301, 7320}
New Cab Harness Routing Is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}
New Cab Harness Routing Is Now Available for Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}
New Steel Cable Straps are Now Used on Certain Tier 4 Final Engines {1408, 1900}
New Steel Cable Straps are Now Used on Certain Tier 4 Final Engines {1408, 1900}
Improved Camera Cable Assembly Is Now Used on Certain Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Specialty Solutions {1408}
Improved Camera Cable Assembly Is Now Used on Certain Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Specialty Solutions {1408}

Caterpillar Parts SIS Catalog 349E :

WIRING GP-ELECTRONIC CONTROL
362-1381 WIRING GP-ELECTRONIC CONTROL
WIRING GP-CONVERTER
328-0247 WIRING GP-CONVERTER
WIRING GP-CONSOLE
324-5726 WIRING GP-CONSOLE
WIRING GP-CONSOLE
324-5724 WIRING GP-CONSOLE
319-0880 WIRING GP-CONSOLE
WIRING GP-COMMUNICATION
369-0146 WIRING GP-COMMUNICATION
WIRING GP-COMMUNICATION
328-0023 WIRING GP-COMMUNICATION
WIRING GP-COMMUNICATION
319-0885 WIRING GP-COMMUNICATION
WIRING GP-ELECTRONIC CONTROL
362-1381 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ENGINE
426-3720 WIRING GP-ENGINE
WIRING GP-PLATFORM
319-0878 WIRING GP-PLATFORM
WIRING GP-SENSOR
349-6154 WIRING GP-SENSOR
WIRING GP-UNIT INJECTOR
345-6734 WIRING GP-UNIT INJECTOR
WIRING GP-VALVE
328-0249 WIRING GP-VALVE
WIRING GP-VALVE
430-4645 WIRING GP-VALVE
DRIVE GP-FINAL
333-3036 DRIVE GP-FINAL

Truck sale:

Caterpillar 349E
 
Caterpillar 349E
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
Caterpillar 349E
 
Caterpillar 349E
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
Caterpillar 349E, Crawler Excavators, Construction
 
Caterpillar 349E, Crawler Excavators, Construction
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 349E, bucket, Construction
8,889 
Caterpillar 349E, bucket, Construction
- bucket
FINNING CANADA
Caterpillar 349EW, Crawler Excavators, Construction
675,000 
Caterpillar 349EW, Crawler Excavators, Construction
- Crawler Excavators
RING POWER CORP.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.