AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

350-8250 WIRING GP-CONVERTER -POWER SUPPLY S/N PTB1-UP 12-VOLT, 10-AMPERE PART OF 360-1975 OPTION AR-CAB AN ATTACHMENT 336D L


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
DRIVE GP-FINAL

EXCAVATOR 336D L EXCAVATOR PTB
 336D L Excavator PTB00001-UP (MACHINE) POWERED BY C9 Engine SEBP5683 336D L PTB   (2011)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
251-0433 WIRING GP-CONSOLE
WIRING GP-CONSOLE
251-0435 WIRING GP-CONSOLE
WIRING GP-CONVERTER
350-8250 WIRING GP-CONVERTER
WIRING GP-ELECTRONIC CONTROL
330-6018 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
330-6018 WIRING GP-ELECTRONIC CONTROL
WIRING GP-FINE SWING
238-1568 WIRING GP-FINE SWING
 

#SEBP56830200
 

350-8250: WIRING GP-CONVERTER

350-8250 WIRING GP-CONVERTER -POWER SUPPLY
S/N PTB1-UP
12-VOLT, 10-AMPERE
PART OF 360-1975 OPTION AR-CAB
AN ATTACHMENT
i04033128 SEBP5683
3508250 WIRING GP-CONVERTER Parts scheme
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 251-0483 [1] BRACKET  
2. 324-5770 [1] CONVERTER-POWER (24-VOLT TO 12-VOLT)  
3. 324-5771 [2] SOCKET-AUXILIARY POWER (12-VOLT)  
4. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
6. 8T-4171 M [4] BOLT (M6X1X12-MM)  
7. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP56830201
 

330-6018: WIRING GP-ELECTRONIC CONTROL

330-6018 WIRING GP-ELECTRONIC CONTROL
S/N THX22638-UP; THY7136-UP
PART OF 290-0760 ENGINE AR-COMPLETE
Type 1
i03614962 SEBP5683
3306018 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [18] STRAP-CABLE  
2. 215-3249 [1] HARNESS AS-ENGINE (UNIT INJECTOR)  
  3S-2093 [5] STRAP-CABLE  
  105-1797 [5] MOUNT  
  9X-3401 [12] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [12] PIN-CONNECTOR (14-GA TO 16-GA)  
  172-6064 [1] WEDGE-RECEPTACLE LOCK  
  191-7823 [1] RECEPTACLE AS  
  307-8428 [1] GASKET  
3. 323-9140 [1] HARNESS AS-ENGINE (SPEED SENSOR)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [95] PLUG-SEAL  
  100-3320 [1] PLUG AS-CONNECTOR (2-PIN)  
  126-5011 [1] SEAL-CONNECTOR  
  305-5362 [4] TERMINAL AS (18-GA)  
  111-2416 [1] PLUG AS-CONNECTOR (2-PIN)  
  126-5011 [1] SEAL-CONNECTOR  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(25-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)  
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS & WEDGE)
  172-6062 [1] PLUG AS-CONNECTOR (18-PIN)  
  172-6065 [1] WEDGE-PLUG LOCK  
  180-9340 [75] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  211-6807 [1] COVER-CONNECTOR  
  230-4011 [2] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  230-4013 [1] PLUG AS-CONNECTOR (3-PIN)  
  264-7030 [1] SEAL-CONNECTOR  
  237-0227 [3] PLUG AS-CONNECTOR (3-PIN)  
    (EACH INCLUDES)
  264-7030 [1] SEAL-CONNECTOR  
  264-5732 [1] PLUG AS-CONNECTOR (120-PIN)  
  288-7324 [1] SEAL-CONNECTOR  
4. 4P-7581 [6] CLIP (LADDER)  
5. 4P-8134 [2] CLIP (LADDER)  
6. 5P-7970 M [3] NUT (M8X1.25-THD)  
7. 6V-5217 M [1] BOLT (M8X1.25X20-MM)  
8. 6V-5839 [3] WASHER (11X21X2.5-MM THK)  
9. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
10. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
11. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
12. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
13. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
14. 8T-5451 M [1] BOLT (M6X1X12-MM)  
15. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
16. 9X-2332 [1] CLIP  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP56830202
 

330-6018: WIRING GP-ELECTRONIC CONTROL

330-6018 WIRING GP-ELECTRONIC CONTROL
S/N THX22638-UP; THY7136-UP
PART OF 290-0760 ENGINE AR-COMPLETE
Type 2
i05389546 SEBP5683
3306018 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [18] STRAP-CABLE  
2. 419-0841 CY [1] HARNESS AS-ENGINE (UNIT INJECTOR)  
3. 323-9140 Y [1] HARNESS AS-ENGINE (SPEED SENSOR)  
4. 4P-7581 [6] CLIP (LADDER)  
5. 4P-8134 [2] CLIP (LADDER)  
6. 5P-7970 M [3] NUT (M8X1.25-THD)  
7. 6V-5217 M [1] BOLT (M8X1.25X20-MM)  
8. 6V-5839 [3] WASHER (11X21X2.5-MM THK)  
9. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
10. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
11. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
12. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
13. 8T-4205 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
14. 8T-5451 M [1] BOLT (M6X1X12-MM)  
15. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
16. 6V-4369 C [1] CLIP  
17. 439-4571 C [5] CLIP (LOOP)  
18. 440-0881 CM [5] BOLT-SOCKET HEAD (M8X1.25-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56830203
 

238-1568: WIRING GP-FINE SWING

238-1568 WIRING GP-FINE SWING
S/N PTB1-UP
PART OF 359-2439 CHASSIS AR
i02373367 SEBP5683
2381568 WIRING GP-FINE SWING Parts scheme
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 111-4836 [4] CLIP  
2. 111-4837 [3] CLIP  
3. 275-6865 [1] HARNESS AS-SOLENOID (FINE SWING)  
4. 238-2171 [1] BRACKET AS  
5. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
7. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
  M   METRIC PART
 

#SEBP56830204
 

269-3410: WIRING GP-HEATER

269-3410 WIRING GP-HEATER -AIR INLET MANIFOLD
S/N THX22638-UP; THY7136-UP
PART OF 290-0760 ENGINE AR-COMPLETE
i02404833 SEBP5683
2693410 WIRING GP-HEATER Parts scheme
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 398-0940 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER RELAY)  
3. 224-1377 [1] CABLE AS  
4. 283-1226 [1] BRACKET AS  
5. 208-9277 M [2] BOLT-FLANGE HEAD (M6X1X20-MM)  
6. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
7. 6V-6317 M [1] BOLT (M10X1.5X20-MM)  
8. 6V-4248 M [1] BOLT (M10X1.5X25-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP56830205
 

259-4964: WIRING GP-MEDIUM PRESSURE

259-4964 WIRING GP-MEDIUM PRESSURE
S/N PTB1-UP
PART OF 255-5822 CONTROL AR-AUXILIARY
AN ATTACHMENT
i02389279 SEBP5683
2594964 WIRING GP-MEDIUM PRESSURE Parts scheme
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [6] STRAP-CABLE  
2. 7K-1181 [3] STRAP-CABLE  
3. 102-7886 [1] SPACER (11X20X80-MM THK)  
4. 204-1611 [1] STRAP (DUAL)  
5. 259-5125 [1] HARNESS AS-CONTROL  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  243-4508 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
6. 132-5789 [1] CLIP (LADDER)  
7. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
8. 8T-4198 M [1] BOLT (M10X1.5X100-MM)  
  M   METRIC PART
 

#SEBP56830206
 

336-5982: WIRING GP-PLATFORM

336-5982 WIRING GP-PLATFORM
S/N PTB1-UP
PART OF 340-6485 OPERATOR AR
i03652742 SEBP5683
3365982 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-2342 [1] STRAP AS-GROUND  
2. 3E-5169 [1] GUARD-SWITCH  
3. 3S-2093 [7] STRAP-CABLE  
4. 7K-1181 [16] STRAP-CABLE  
5. 111-4836 [5] CLIP  
6. 111-4838 [2] CLIP  
7. 111-4839 [2] STRAP  
8. 116-0118 [14] CLIP  
9. 234-1122 [1] COVER  
10. 251-0299 [1] HARNESS AS-SWITCH (SECONDARY SHUTDOWN)  
  2L-8074 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 6 SCREW)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  243-4505 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
11. 336-5966 [1] HARNESS AS-PLATFORM  
  102-8802 [5] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [13] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8730 [26] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-2093 [21] STRAP-CABLE  
  8N-1546 [1] PIN-CONNECTOR (6-GA)  
  8T-8737 [54] PLUG-SEAL  
  102-7964 [1] PLUG-CONNECTOR (16-PIN)  
  102-7965 [13] TERMINAL (FEMALE)  
  9W-0852 [7] PIN-CONNECTOR (14-GA TO 16-GA)  
  9W-0844 [38] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  116-0255 [1] TERMINAL-BLADE (10-GA TO 20-GA)(FEMALE)  
  119-3662 BE TUBE-HEAT SHRINK (10.85-MM DIA)  
  121-1039 [1] TERMINAL (MALE)  
  121-1168 [2] CONNECTOR-RECEPTACLE  
  121-1173 [33] TERMINAL (MALE)  
  125-4766 [1] PLUG-CONNECTOR (17-PIN)  
  125-4841 [1] WEDGE-PLUG LOCK (21-PIN)  
  125-7874 BE TUBE-HEAT SHRINK (5.72-MM DIA)  
  125-7875 BE TUBE-HEAT SHRINK (7.44-MM DIA)  
  9X-3402 [66] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [66] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  127-5484 [1] RECEPTACLE AS-CONNECTOR (1-PIN)  
  2L-8050 [1] TERMINAL-RING (6-GA, 1/4-IN SCREW)  
  2L-8052 [2] TERMINAL-RING (6-GA, 3/8-IN SCREW)  
    -OR-
  2L-8060 [2] TERMINAL-RING (8-GA, 3/8-IN SCREW)  
  2L-8069 [2] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  134-3296 [1] HOUSING-PLUG  
  134-3297 [2] SEAL  
  9X-3401 [26] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [26] PIN-CONNECTOR (14-GA TO 16-GA)  
  153-2620 [1] PLUG AS-CONNECTOR (54-PIN, BLACK)  
  163-6759 [1] SEAL  
  155-2270 [10] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  197-4385 [2] DIODE  
  230-4009 [3] PLUG AS-CONNECTOR (12-PIN)  
    (EACH INCLUDES)
  264-7034 [1] SEAL-CONNECTOR  
  230-4011 [4] PLUG AS-CONNECTOR (2-PIN)  
    (EACH INCLUDES)
  264-7029 [1] SEAL-CONNECTOR  
  230-5010 [3] PLUG AS-CONNECTOR (6-PIN)  
    (EACH INCLUDES)
  264-7032 [1] SEAL-CONNECTOR  
  238-2363 [10] TERMINAL (FEMALE)  
  238-2366 [6] TERMINAL (MALE)  
  239-7352 [1] PLUG AS-CONNECTOR (6-PIN)  
  264-7032 [1] SEAL-CONNECTOR  
  243-4505 [2] RECEPTACLE AS-CONNECTOR (2-PIN)  
  243-4507 [1] RECEPTACLE AS-CONNECTOR (4-PIN)  
  243-4508 [4] RECEPTACLE AS-CONNECTOR (6-PIN)  
  243-4509 [1] RECEPTACLE AS-CONNECTOR (8-PIN)  
  243-4510 [2] RECEPTACLE AS-CONNECTOR (12-PIN)  
  247-2693 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
12. 096-6166 [2] WASHER-HARD (4.5X9X1-MM THK)  
13. 4D-1836 [1] SWITCH-TOGGLE (SECONDARY SHUTDOWN)  
14. 7X-2621 M [7] BOLT (M10X1.5X12-MM)  
15. 8T-0337 M [2] SCREW-MACHINE (M4X0.7X12-MM)  
16. 8T-4121 [15] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP56830207
 

342-3108: WIRING GP-WINDOW WIPER

342-3108 WIRING GP-WINDOW WIPER
S/N PTB1-UP
PART OF 343-1195 WIPER AR-WINDOW
AN ATTACHMENT
i03666401 SEBP5683
3423108 WIRING GP-WINDOW WIPER Parts scheme
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 342-3109 [1] HARNESS AS-WINDOW WIPER  
  3S-2093 [6] STRAP-CABLE  
  102-7965 [12] TERMINAL (FEMALE)  
  9W-0844 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  111-4816 [1] PLUG-CONNECTOR (13-PIN)  
  121-1173 [8] TERMINAL (MALE)  
  125-4840 [1] WEDGE-PLUG LOCK (13-PIN)  
  230-5008 [1] PLUG AS-CONNECTOR (4-PIN)  
  264-7031 [1] SEAL-CONNECTOR  
2. 7K-1181 [14] STRAP-CABLE  
 

#SEBP56830208
 

296-6217: DRIVE GP-FINAL

296-6217 DRIVE GP-FINAL -WITH MOTOR
S/N PTB1-369
PART OF 353-0499 DRIVE GP-FINAL
i02946278 SEBP5683
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  296-6218 Y [1] DRIVE GP-FINAL (WITHOUT MOTOR)  
  191-5606 Y [1] MOTOR & MTG GP-TRAVEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP56830209
 

296-6218: DRIVE GP-FINAL

296-6218 DRIVE GP-FINAL -WITHOUT MOTOR
S/N PTB1-369
PART OF 296-6217 DRIVE GP-FINAL
i02946635 SEBP5683
2966218 DRIVE GP-FINAL Parts scheme
  For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-2338 [2] PLUG-PIPE  
2. 7Y-0639 [1] GEAR-SUN (21-TEETH)  
3. 7Y-0642 [1] GEAR-RING (63-TEETH)  
4. 7Y-0643 [1] CARRIER  
5. 7Y-0645 [1] CARRIER  
6. 7Y-0659 [3] GEAR-PLANETARY (22-TEETH)  
7. 7Y-0661 [3] SHAFT-PLANETARY  
8. 7Y-0662 [4] SHAFT-PLANETARY  
9. 7Y-0663 [4] GEAR-PLANETARY (20-TEETH)  
10. 7Y-0667 [1] RING-RETAINING  
11. 7Y-0673 [1] GEAR-RING (73-TEETH)  
12. 7Y-0676 [3] GEAR-PLANETARY (24-TEETH)  
13. 7Y-0731 [1] CARRIER AS  
13A. 7Y-0656 [3] SHAFT-PLANETARY  
14. 7Y-1056 BJ [1] SHIM (0.8-MM THK)  
  7Y-1057 BJ [1] SHIM (1-MM THK)  
  267-6809 BJ [1] SHIM (0.75-MM THK)  
  267-6810 BJ [1] SHIM (0.85-MM THK)  
  267-6811 BJ [1] SHIM (0.9-MM THK)  
  267-6812 BJ [1] SHIM (0.95-MM THK)  
  267-6813 BJ [1] SHIM (1.2-MM THK)  
  267-6814 BJ [1] SHIM (1.4-MM THK)  
  267-6815 BJ [1] SHIM (1.8-MM THK)  
  267-6816 BJ [1] SHIM (2-MM THK)  
  267-6817 BJ [1] SHIM (2.3-MM THK)  
16. 7Y-1094 M [14] WASHER (66X102X1-MM THK)  
17. 7Y-5235 M [20] BOLT (M24X3X190-MM)  
18. 094-0577 [1] PLATE (7-MM THK)  
19. 094-0578 [1] PLATE (8-MM THK)  
20. 094-0579 [1] PLATE (9-MM THK)  
21. 094-0580 [1] PLATE (10-MM THK)  
22. 110-7231 [1] GEAR-SUN (18-TEETH)  
23. 114-1541 J [6] PIN-DOWEL  
24. 191-2521 [1] GEAR-SUN (23-TEETH)  
25. 191-2526 [1] COVER  
26. 199-4582 [3] BEARING AS  
27. 199-4583 [11] BEARING AS  
28. 227-6190 J [1] HOUSING-MOTOR  
29. 227-6191 J [1] HOUSING (SPROCKET)  
30. 227-6192 J [1] GEAR-COUPLING (66-TEETH)  
31. 255-2272 J [1] SEAL GP-DUO-CONE  
  205-9114 [2] RING-TORIC  
41. 279-0344 J [2] BEARING AS-TAPERED ROLLER  
42. 093-1731 [1] RING-RETAINING  
43. 094-0584 [6] WASHER (40.3X72X1-MM THK)  
44. 095-0891 [7] PIN-SPRING  
45. 096-3216 M [2] SETSCREW-SOCKET (M12X1.75X12-MM)  
46. 191-2645 [1] COUPLING  
47. 2P-3628 [1] SEAL-O-RING  
48. 6V-8133 JM [10] BOLT (M24X3X80-MM)  
49. 6V-8237 J [10] WASHER (26X44X4-MM THK)  
50. 7M-8485 [2] SEAL-O-RING  
51. 7Y-0595 [2] SPACER (58X79.6X6-MM THK)  
52. 7Y-0644 [1] SPACER (163X190X8-MM THK)  
53. 8T-4167 [20] WASHER-HARD (26X44X4-MM THK)  
54. 8T-4240 [3] RING-RETAINING  
55. 9X-6032 M [12] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
56. 1U-8846 B SEALANT-GASKET  
   
    AVAILABLE REPAIR KIT(S):
  296-6219 J [1] KIT-HOUSING (FINAL DRIVE)  
    (ALSO INCLUDES HARD WASHER, BOLTS,COVER, & PLATE AS)
  B   USE AS REQUIRED
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

Information:

Engine News
Different Wire Removal Tool and Different Wire Installation Tool Are Required for 85 Pin Connectors on Engine Wiring Harnesses {0709}
2005/05/09
Operation and Maintenance Manual
Battery Disconnect Switch
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Battery or Battery Cable - Inspect/Replace
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Battery - Recycle
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
SmartBoom Operation - If Equipped
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
SmartBoom Control - If Equipped
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Power Receptacle - If Equipped
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Fuses - Replace
330D and 336D Excavators and 336D MHPU Mobile Hydraulic Power Unit
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Emergency Stop Indication on EMCPII with an ADEM II, ADEM III, or ADEM IV Electronic Control Module (ECM){1900, 1901}
Emergency Stop Indication on EMCPII with an ADEM II, ADEM III, or ADEM IV Electronic Control Module (ECM){1900, 1901}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for 259-4963 Auxiliary Control Wiring Gp {1408}
Installation Procedure for 259-4963 Auxiliary Control Wiring Gp {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure for Installing the 373-8980 Console Harness As on Certain Excavators{1408, 5258}
Procedure to Retrofit 330D, 336D and 340D Excavators with L5 Controls{1408, 5057, 7610, 7620}
Procedure to Retrofit 330D, 336D and 340D Excavators with L5 Controls{1408, 5057, 7610, 7620}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Procedure to Troubleshoot the Upper Window Wiper Relay on Certain 311D through 349D, E Series, and F Series Excavators{1408, 7305}
Technical Information Bulletin
Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Tool Operating Manual
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Switches
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Sensors
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electrical Connector - Inspect
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Wiring Harness (Open Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Wiring Harness (Short Circuit) - Test
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
System Schematic
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
Overload Warning - Set - If Equipped
330D and 336D Excavators Hydraulic System
Troubleshooting
Electrical Connectors - Inspect
C7 and C9 Engines for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 0174 FMI 04 Fuel Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 and C9 Engines for Caterpillar Built Machines
CID 0091 FMI 08 Throttle Position signal abnormal
C7 and C9 Engines for Caterpillar Built Machines
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 and C9 Engines for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines
CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 and C9 Engines for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines
Fuel Filter Differential Pressure Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
Engine Wiring Information
C7 and C9 Engines for Caterpillar Built Machines
CID 2417 FMI 05 Ether Injection Control Solenoid current low
C7 and C9 Engines for Caterpillar Built Machines
CID 2417 FMI 06 Ether Injection Control Solenoid current high
C7 and C9 Engines for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 and C9 Engines for Caterpillar Built Machines
CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 and C9 Engines for Caterpillar Built Machines
CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 and C9 Engines for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 and C9 Engines for Caterpillar Built Machines
CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 and C9 Engines for Caterpillar Built Machines
Air Inlet Heater Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines
MID 039 - CID 0096 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0096 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0586 - FMI 05
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0586 - FMI 12
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0588 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 1178 - FMI 08
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 2280 - FMI 03
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
CID 0174 FMI 03 Fuel Temperature open/short to +batt
C7 and C9 Engines for Caterpillar Built Machines
Sensors and Electrical Connectors
C7 and C9 Engines for Caterpillar Built Machines
Throttle Switch Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
Low Engine Oil Pressure Lamp Circuit - Test
C7 and C9 Engines for Caterpillar Built Machines
Electrical Component and Connector Locations
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0110 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0110 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 2300 - FMI 09
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
MID 039 - CID 0600 - FMI 04
320D, 321D, 323D, 324D, 325D, 326D, 328D, 329D, 330D, 336D, 336D2, 340D and 340D2 Excavators, 324D Forest Machine and 323D MHPU, 324D MHPU, 325D MHPU, 329D MHPU, 330D MHPU and 336D MHPU Mobile Hydraulic Power Units Machine Electronic Control System
CID 0190 FMI 08 Engine Speed signal abnormal
C7 and C9 Engines for Caterpillar Built Machines
CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 and C9 Engines for Caterpillar Built Machines
Service Magazine
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
A New Console Harness Assembly Is Available for Certain Excavators {1408}
2015/04/13
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21
New Engine Harness Assembly Is Now Used On Certain Applications Equipped With C9 Engines {1408}
2013/07/11
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
The Control Panel Assembly has been Improved for Certain 311D to 349D Excavators {1408, 7301}
2014/03/27
A Procedure to Retrofit 330D, 336D and 340D Excavators with L5 Controls is Available {1408, 5057, 7610, 7620}
2014/09/11
A New Antenna Assembly is Now Available for the ROPS on Certain Excavators and Mobile Hydraulic Power Units {1408, 7301}
2014/11/19
A New Special Instruction is Available for Troubleshooting the Upper Window Wiper Relay Circuit on Certain 311D-349D, E Series, and F Series Excavators {1408, 7305}
2015/08/07
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
New Control Harness Assembly Is Now Used on Certain Cat<SUP>&reg;</SUP> Engines {1408}
New Control Harness Assembly Is Now Used on Certain Cat® Engines {1408}

Caterpillar Parts SIS Catalog 336D L :

WIRING GP-CONSOLE
251-0435 WIRING GP-CONSOLE
251-0433 WIRING GP-CONSOLE
WIRING GP-CONSOLE
231-1836 WIRING GP-CONSOLE
WIRING GP-CAB
336-6174 WIRING GP-CAB
WIRING GP-AUXILIARY CONTROL
328-0370 WIRING GP-AUXILIARY CONTROL
WIRING GP-AUXILIARY CONTROL
328-0370 WIRING GP-AUXILIARY CONTROL
WIRING GP-AUXILIARY CONTROL
259-4963 WIRING GP-AUXILIARY CONTROL
VALVE GP-ETHER STARTING
239-1134 VALVE GP-ETHER STARTING
WIRING GP-ELECTRONIC CONTROL
330-6018 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
330-6018 WIRING GP-ELECTRONIC CONTROL
WIRING GP-FINE SWING
238-1568 WIRING GP-FINE SWING
WIRING GP-HEATER
269-3410 WIRING GP-HEATER
WIRING GP-MEDIUM PRESSURE
259-4964 WIRING GP-MEDIUM PRESSURE
WIRING GP-PLATFORM
336-5982 WIRING GP-PLATFORM
WIRING GP-WINDOW WIPER
342-3108 WIRING GP-WINDOW WIPER
296-6217 DRIVE GP-FINAL

Truck sale:

Caterpillar 336D L
 
Caterpillar 336D L
- Crawler Excavators
GREGORY POOLE EQUIPMENT CO.
Caterpillar 336DL, Crawler Excavators, Construction
74,767 
Caterpillar 336DL, Crawler Excavators, Construction
- Crawler Excavators
WILLIAM ADAMS PTY. LTD.
 
31,260 
Caterpillar 336DL, Crawler Excavators, Construction
- Crawler Excavators
SIME DARBY INDUSTRIAL SDN BHD
Caterpillar 336DL, Crawler Excavators, Construction
119,059 
Caterpillar 336DL, Crawler Excavators, Construction
- Crawler Excavators
EMPIRE MACHINERY
Caterpillar 336DL, Crawler Excavators, Construction
57,256 
Caterpillar 336DL, Crawler Excavators, Construction
- Crawler Excavators
WESTRAC PTY. LTD. (NSW)
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.