279-7825 INSTALLATION AR-ENGINE S/N ZML1-UP PART OF 377-6980 GENERAL AR 336D L EXCAVATOR

Part No	Qty	Parts name
239-6407 Y	[1]	AIR CLEANER & MOUNTING GP
245-7940 Y	[1]	CONDENSER & MTG GP-REFRIGERANT
230-2899 Y	[1]	FAN GP-SUCTION
239-6406 Y	[1]	LINES GP-AIR (AIR CLEANER TO TURBOCHARGER)
230-2898 Y	[1]	LINES GP-AIR (AFTERCOOLER TO TURBOCHARGER)
239-6408 Y	[1]	LINES GP-ENGINE OIL DRAIN
239-6474 Y	[1]	MOUNTING GP-ENGINE
239-6409 Y	[1]	MOUNTING GP-ENGINE OIL FILTER
230-2896 Y	[1]	RADIATOR & HYD OIL COOLER GP

279-7820	[1]	PLUG GP-MUFFLER
3J-5390	[1]	PLUG (3/8-18-THD)(MUFFLER)
Y		SEPARATE ILLUSTRATION

#SEBP56900031

242-0674: CAMSHAFT GP

CAMSHAFT GP

242-0674 CAMSHAFT GP
S/N TXD1-UP; THX22638-UP
PART OF 229-2665, 348-2746, 348-2747, 384-3426, 387-8534 ENGINE AR-CORE
ALSO AN ATTACHMENT

i02021378 SEBP5690

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	107-7694	[1]	PLATE-THRUST
2.	242-0673	[1]	CAMSHAFT AS
2A.	1B-8705	[1]	KEY-WOODRUFF
2B.	224-3247	[1]	GEAR (100-TEETH)
3.	6V-3940 M	[2]	BOLT (M8X1.25X25-MM)
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP56900032

202-3301: COVER GP-CYLINDER BLOCK

COVER GP-CYLINDER BLOCK

202-3301 COVER GP-CYLINDER BLOCK -CRANKCASE
S/N TXD1-UP; THX22638-UP
PART OF 224-9843 ENGINE AR, 290-0760, 391-1071, 391-1075 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i01592478 SEBP5690

2023301 COVER GP-CYLINDER BLOCK Parts scheme

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	213-2411	[1]	COVER
2.	213-2410	[1]	GASKET
3.	240-0041	[1]	BREATHER AS (CRANKCASE)
4.	3E-8005 M	[1]	BOLT (M8X1.25X160-MM)
5.	6V-3918 M	[2]	BOLT (M8X1.25X50-MM)
6.	6V-3940 M	[9]	BOLT (M8X1.25X25-MM)
7.	9F-4446	[1]	SEAL-O-RING (CRANKCASE BREATHER)
8.	9M-1974	[11]	WASHER-HARD (8.8X16X2-MM THK)
9.	5N-4185	[1]	WASHER-SPECIAL
	M		METRIC PART

#SEBP56900033

127-5728: COVER GP-FLYWHEEL HOUSING

COVER GP-FLYWHEEL HOUSING

127-5728 COVER GP-FLYWHEEL HOUSING
S/N TXD1-UP; THX22638-UP
PART OF 224-9843 ENGINE AR, 290-0760, 391-1075 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i00517284 SEBP5690

1275728 COVER GP-FLYWHEEL HOUSING Parts scheme

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	483-0773	[1]	COVER

#SEBP56900034

127-5728: COVER GP-FLYWHEEL HOUSING

COVER GP-FLYWHEEL HOUSING

127-5728 COVER GP-FLYWHEEL HOUSING
S/N THX22638-UP
PART OF 391-1071 ENGINE AR-COMPLETE
AN ATTACHMENT

i06589285 SEBP5690

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9Y-6089 C	[1]	GASKET
2.	0S-1589 C	[3]	BOLT (5/8-11X1.75-IN)
3.	4D-3704 C	[3]	WASHER-HARD (17X30X5-MM THK)
4.	4N-1114 C	[1]	COVER
	C		CHANGE FROM PREVIOUS TYPE

#SEBP56900035

118-1727: COVER GP-FRONT HOUSING

COVER GP-FRONT HOUSING

118-1727 COVER GP-FRONT HOUSING -ACCESSORY DRIVE
S/N TXD1-UP; THX22638-UP
REQUIRED ON ENGINES WITHOUT FACTORY INSTALLED AIR COMPRESSOR
PART OF 224-9843 ENGINE AR, 290-0760, 391-1071, 391-1075 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i00480574 SEBP5690

1181727 COVER GP-FRONT HOUSING Parts scheme

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-8245	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
2.	6V-5696 M	[2]	BOLT (M12X1.75X80-MM)
3.	4W-2026	[1]	COVER
4.	135-9819	[1]	SEAL-INTEGRAL
5.	6V-8149 M	[2]	NUT (M12X1.75-THD)
	M		METRIC PART

#SEBP56900036

211-3285: COVER GP-FRONT HOUSING

COVER GP-FRONT HOUSING

211-3285 COVER GP-FRONT HOUSING
S/N TXD1-UP; THX22638-UP
PART OF 224-9843 ENGINE AR, 290-0760, 391-1071, 391-1075 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT

i01593478 SEBP5690

2113285 COVER GP-FRONT HOUSING Parts scheme

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-2099 M	[2]	STUD (M8X1.25X52.75-MM)
2.	7C-1445	[1]	COVER
3.	166-1776	[1]	COVER AS-FRONT
3A.	126-1757	[2]	WASHER (10.85X19.3X1.27-MM THK)
3B.	136-0822	[2]	STUD
4.	166-1781	[1]	GASKET
5.	061-9455	[1]	SEAL-O-RING
6.	5C-7261 M	[2]	NUT (M8X1.25-THD)
7.	6V-2317 M	[10]	BOLT (M8X1.25X30-MM)
8.	8T-0100 M	[2]	BOLT (M8X1.25X60-MM)
9.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

#SEBP56900037

235-8174: COVER GP-VALVE MECHANISM

COVER GP-VALVE MECHANISM

235-8174 COVER GP-VALVE MECHANISM
S/N THX22638-UP
PART OF 224-9843 ENGINE AR, 290-0760, 391-1071 ENGINE AR-COMPLETE
FOR USE WITH @@@@@233-0423@@@@@
ALSO AN ATTACHMENT

i04032542 SEBP5690

2358174 COVER GP-VALVE MECHANISM Parts scheme

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	358-7872 C	[1]	COVER GP-VALVE MECHANISM
1A.	285-4106	[1]	SEAL-VALVE COVER
2.	353-6988	[1]	BASE GP-VALVE COVER
2A.	268-3490	[1]	SEAL-VALVE COVER (VALVE MECHANISM BASE)
3.	227-4531	[1]	CAP AS-ENGINE OIL FILLER
3A.	7F-8268	[1]	SEAL-O-RING
4.	358-7876 C	[11]	SLEEVE-SPACER

	C		CHANGE FROM PREVIOUS TYPE

#SEBP56900038

235-8174: COVER GP-VALVE MECHANISM

COVER GP-VALVE MECHANISM

235-8174 COVER GP-VALVE MECHANISM
S/N TXD1-UP; THX43008-UP
PART OF 391-1075 ENGINE AR-COMPLETE
FOR USE WITH @@@@@233-0423@@@@@

i02637546 SEBP5690

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	263-7825 C	[1]	COVER GP-VALVE MECHANISM
1A.	285-4106	[1]	SEAL-VALVE COVER
2.	271-2418	[1]	BASE GP-VALVE COVER
2A.	268-3490	[1]	SEAL-VALVE COVER (VALVE MECHANISM BASE)
3.	227-4531	[1]	CAP AS-ENGINE OIL FILLER
3A.	7F-8268	[1]	SEAL-O-RING
4.	273-2838 C	[11]	SLEEVE-SPACER

	C		CHANGE FROM PREVIOUS TYPE

#SEBP56900039

164-6148: CRANKSHAFT GP

CRANKSHAFT GP

164-6148 CRANKSHAFT GP
S/N TXD1-UP; THX22638-UP
PART OF 229-2665, 348-2746, 348-2747, 384-3426, 387-8534 ENGINE AR-CORE
ALSO AN ATTACHMENT

i01176707 SEBP5690

For full view, you need register

Parts for your 336D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	151-2939 J	[7]	BEARING-MAIN (STANDARD)
	282-1771 AB	[7]	BEARING-MAIN (0.25-MM US)
	282-1772 AB	[7]	BEARING-MAIN (0.51-MM US)
2.	261-1544	[1]	CRANKSHAFT AS
2A.	1B-8705	[1]	KEY-WOODRUFF
2B.	2W-8147	[1]	GEAR (50-TEETH)
2C.	9Y-0810	[1]	SLEEVE-WEAR
3.	246-3150 J	[2]	PLATE-THRUST

			AVAILABLE REPAIR KIT(S):
	243-6716 AJ		KIT-BEARING (STANDARD)
			(INCLUDES A COMPLETE SET OF MAIN BEARINGS & THRUST PLATES)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	R		REMANUFACTURED PART MAY BE AVAILABLE

Information:

ENGINE ARRANGEMENT

ENGINE AR

Truck Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/18

Engine News

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/25

Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}

Special Instruction

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Technical Information Bulletin

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Systems Operation

General Information
C9 Engines for Caterpillar Built Machines

Reuse And Salvage Guidelines

Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}

Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}

Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}

Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}

Contamination Control Guidelines

Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}

Applied Failure Analysis

Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}

Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}

Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}

Troubleshooting

Service Information Report
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer

Welding Precaution
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer

Symptom Troubleshooting
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer

Engine Has Mechanical Noise (Knock)
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer

Timing - Calibrate
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer

Engine Cranks but Does Not Start
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer

Engine Does Not Crank
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer

Engine Vibration Is Excessive
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer

Power Is Intermittently Low or Power Cutout Is Intermittent
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer

General Information
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer

Component Location
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer

System Overview
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer

Engine Top Speed Is Not Obtained
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer

Acceleration Is Poor or Throttle Response Is Poor
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer

Engine Overspeeds
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer

Engine Misfires, Runs Rough or Is Unstable
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer

Engine Stalls at Low RPM
C9 Engine for the 816F Series 2 Landfill Compactor, the 815F Series 2 Soil Compactor, and the 814F Series 2 Wheel Dozer

Service Magazine

Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/24