HYDRAULIC SYSTEM
CYLINDER GPHYDRAULIC SYSTEM
DRIVE GPHYDRAULIC SYSTEM
CYLINDER GP#SEBP56960520
311-9526: CYLINDER GP-BOOM
311-9526 CYLINDER GP-BOOM
S/N P5D1-UP; L5R1-UP
150-MM (5.9-IN) BORE X 1440-MM (56.7-IN) STROKE
PART OF 289-8020 CYLINDER & SEAL GP-BOOM
S/N P5D1-UP; L5R1-UP
150-MM (5.9-IN) BORE X 1440-MM (56.7-IN) STROKE
PART OF 289-8020 CYLINDER & SEAL GP-BOOM
Parts for your 345D EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 6I-6798 | [1] | STOP | |
2. | 358-8524 | [1] | HEAD | |
3. | 7Y-4669 J | [1] | RING-BACKUP | |
4. | 7Y-4695 M | [1] | LOCKNUT (M80X2-THD) | |
5. | 9X-3601 J | [1] | SEAL AS | |
6. | 324-6438 J | [1] | SEAL-BUFFER | |
7. | 188-4216 | [1] | PISTON | |
8. | 188-4218 J | [1] | RING | |
9. | 242-6833 J | [1] | RING-SEAL | |
10. | 289-8027 | [1] | ROD AS | |
10A. | 241-7341 | [1] | BUSHING | |
11. | 311-9527 | [1] | CYLINDER AS | |
11A. | 241-7340 | [1] | BUSHING | |
12. | 7Y-4672 | [1] | RING-RETAINING | |
13. | 165-9290 J | [1] | SEAL-LIP TYPE | |
14. | 324-6439 J | [1] | SEAL-U-CUP | |
15. | 188-4217 J | [2] | RING | |
16. | 095-1633 J | [1] | SEAL-O-RING | |
17. | 114-0760 | [1] | BUSHING | |
18. | 7Y-4673 J | [1] | RING-BACKUP | |
19. | 7Y-5215 M | [8] | BOLT-SOCKET HEAD (M24X3X90-MM) | |
AVAILABLE REPAIR KIT(S): | ||||
324-9485 J | [1] | KIT-SEAL (BOOM CYLINDER) | ||
J | KIT MARKED J SERVICES PART(S) MARKED J | |||
M | METRIC PART |
#SEBP56960521
389-1041: CYLINDER GP-BOOM
389-1041 CYLINDER GP-BOOM
S/N P5D1-UP
160-MM (6.3-IN) BORE X 1575-MM (62-IN) STROKE
PART OF 225-4522 CYLINDER & SEAL GP-BOOM
S/N P5D1-UP
160-MM (6.3-IN) BORE X 1575-MM (62-IN) STROKE
PART OF 225-4522 CYLINDER & SEAL GP-BOOM
#SEBP56960522
225-4526: CYLINDER GP-STICK
225-4526 CYLINDER GP-STICK
S/N P5D1-UP
190-MM (7.5-IN) BORE X 1758-MM (69.2-IN) STROKE
PART OF 225-4525 CYLINDER & SEAL GP-STICK
FIELD REPLACEMENT ORDER @@@@@370-6692@@@@@
S/N P5D1-UP
190-MM (7.5-IN) BORE X 1758-MM (69.2-IN) STROKE
PART OF 225-4525 CYLINDER & SEAL GP-STICK
FIELD REPLACEMENT ORDER @@@@@370-6692@@@@@
#SEBP56960523
370-6692: CYLINDER GP-STICK
370-6692 CYLINDER GP-STICK
S/N P5D1-UP
190-MM (7.5-IN) BORE X 1758-MM (69.2-IN) STROKE
PART OF 225-4525, 358-8460 CYLINDER & SEAL GP-STICK
FIELD REPLACEMENT FOR @@@@@225-4526@@@@@
S/N P5D1-UP
190-MM (7.5-IN) BORE X 1758-MM (69.2-IN) STROKE
PART OF 225-4525, 358-8460 CYLINDER & SEAL GP-STICK
FIELD REPLACEMENT FOR @@@@@225-4526@@@@@
#SEBP56960524
513-3691: CYLINDER GP-STICK
513-3691 CYLINDER GP-STICK
S/N P5D1-UP
90-MM (7.5-IN) BORE X 1758-MM (69.2-IN) STROKE
PART OF 358-8460 CYLINDER & SEAL GP-STICK
S/N P5D1-UP
90-MM (7.5-IN) BORE X 1758-MM (69.2-IN) STROKE
PART OF 358-8460 CYLINDER & SEAL GP-STICK
#SEBP56960525
225-4515: DRIVE GP-AUXILIARY PUMP
225-4515 DRIVE GP-AUXILIARY PUMP
S/N P5D1-UP; L5R1-UP
PART OF 285-1789 CONTROL AR-AUXILIARY, 323-7267, 328-2827 PARTS AR-MISCELLANEOUS
S/N P5D1-UP; L5R1-UP
PART OF 285-1789 CONTROL AR-AUXILIARY, 323-7267, 328-2827 PARTS AR-MISCELLANEOUS
Parts for your 345D EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 234-4620 Y | [1] | DRIVE GP-AUXILIARY PUMP (ACCESSORY DRIVE) | |
Y | SEPARATE ILLUSTRATION |
#SEBP56960526
234-4620: DRIVE GP-AUXILIARY PUMP
234-4620 DRIVE GP-AUXILIARY PUMP -ACCESSORY DRIVE
S/N P5D1-UP; L5R1-UP
PART OF 225-4515 DRIVE GP-AUXILIARY PUMP, 305-5632, 319-6848 PARTS AR-MISCELLANEOUS
S/N P5D1-UP; L5R1-UP
PART OF 225-4515 DRIVE GP-AUXILIARY PUMP, 305-5632, 319-6848 PARTS AR-MISCELLANEOUS
Parts for your 345D EXCAVATOR:
CATERPILLAR SIS#SEBP56960527
295-9441: DRIVE GP-AUXILIARY PUMP
295-9441 DRIVE GP-AUXILIARY PUMP -ACCESSORY DRIVE
S/N P5D1-UP; L5R1-UP
PART OF 234-4620 DRIVE GP-AUXILIARY PUMP
S/N P5D1-UP; L5R1-UP
PART OF 234-4620 DRIVE GP-AUXILIARY PUMP
Parts for your 345D EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 5I-8754 | [3] | SPACER-BEARING (35X45X3-MM THK) | |
2. | 170-9964 | [1] | BEARING | |
3. | 2W-1145 | [1] | RING-RETAINING (INTERNAL) | |
4. | 206-9298 | [1] | SEAL-O-RING | |
5. | 8T-9597 | [1] | RING-RETAINING | |
6. | 236-6919 | [1] | SEAL-O-RING | |
7. | 8H-5352 | [2] | BALL BEARING | |
8. | 8T-9080 M | [2] | BOLT-SOCKET HEAD (M12X1.75X20-MM) | |
9. | 249-6670 | [1] | SEAL-O-RING | |
10. | 225-4517 | [1] | PLATE | |
11. | 8T-4944 M | [3] | BOLT-SOCKET HEAD (M16X2X40-MM) | |
M | METRIC PART |
#SEBP56960528
296-6249: DRIVE GP-SWING
296-6249 DRIVE GP-SWING -WITH MOTOR, RH
S/N P5D1-UP; L5R1-UP
PART OF 323-7215, 347-0450 SPECIAL AR-OEM
S/N P5D1-UP; L5R1-UP
PART OF 323-7215, 347-0450 SPECIAL AR-OEM
Parts for your 345D EXCAVATOR:
CATERPILLAR SIS#SEBP56960529
296-6250: DRIVE GP-SWING
296-6250 DRIVE GP-SWING -WITHOUT MOTOR, RH
S/N P5D1-UP; L5R1-UP
PART OF 296-6249 DRIVE GP-SWING
S/N P5D1-UP; L5R1-UP
PART OF 296-6249 DRIVE GP-SWING
Parts for your 345D EXCAVATOR:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4H-6112 | [1] | BREATHER (SWING DRIVE) | |
2. | 4I-7464 | [4] | GEAR-PLANETARY (25-TEETH) | |
3. | 4I-7466 | [4] | GEAR-PLANETARY (23-TEETH) | |
4. | 4I-7467 | [1] | GEAR-RING (72-TEETH) | |
5. | 6V-7238 | [1] | VALVE-SHUTOFF | |
6. | 7I-7728 | [1] | CARRIER-PLANETARY | |
7. | 7Y-0597 | [1] | SPACER-SPECIAL | |
8. | 7Y-1238 | [1] | CARRIER | |
9. | 093-1730 | [2] | RING-RETAINING | |
10. | 094-1509 | [4] | SHAFT-PLANETARY | |
11. | 094-1528 | [8] | WASHER (53X84X1-MM THK) | |
12. | 095-1806 | [1] | BEARING-ROLLER | |
13. | 096-2653 | [1] | RING-RETAINING | |
14. | 096-4339 | [1] | BEARING AS-ROLLER | |
15. | 110-7216 | [1] | GEAR-SUN (24-TEETH) | |
16. | 114-1383 | [4] | SHAFT-PLANETARY | |
17. | 114-1398 | [1] | GAUGE-OIL LEVEL (SWING DRIVE) | |
18. | 114-1399 | [1] | PIPE-GAUGE | |
19. | 114-1401 | [1] | COVER-HOUSING | |
20. | 114-1403 | [1] | CAGE | |
21. | 136-2802 | [2] | CONNECTOR | |
22. | 136-2803 | [2] | CLIP | |
23. | 169-5534 | [1] | HOUSING | |
24. | 169-5535 | [1] | GEAR-SUN (20-TEETH) | |
25. | 227-6108 | [1] | SHAFT-PINION | |
26. | 227-6215 | [1] | BOSS (1/4-18-THD) | |
27. | 296-6251 I | [1] | HOSE AS | |
28. | 093-1731 | [1] | RING-RETAINING | |
29. | 094-0584 | [8] | WASHER (40.3X72X1-MM THK) | |
30. | 199-4582 | [4] | BEARING AS | |
31. | 095-0886 | [4] | PIN-SPRING | |
32. | 509-6676 | [4] | PIN-SPRING | |
33. | 135-9044 | [2] | SEAL-LIP TYPE | |
34. | 3K-0360 | [1] | SEAL-O-RING | |
35. | 5P-2235 | [1] | SEAL-O-RING | |
36. | 191-2513 | [8] | BEARING AS-ROLLER | |
37. | 7Y-0595 | [1] | SPACER (58X79.6X6-MM THK) | |
38. | 7Y-1434 | [1] | SPACER (40X69.5X6-MM THK) | |
39. | 453-3447 M | [8] | BOLT (M12X1.75X40-MM) | |
40. | 451-2182 | [10] | WASHER-HARD (13.5X25.5X3-MM THK) | |
41. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
42. | 453-3446 M | [1] | BOLT (M12X1.75X35-MM) | |
43. | 453-2843 M | [16] | BOLT (M16X2X180-MM) | |
44. | 451-2175 | [16] | WASHER-HARD (17.5X30X3.5-MM THK) | |
45. | 1U-8846 B | SEALANT-GASKET | ||
B | USE AS REQUIRED | |||
I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
M | METRIC PART |
Information:
HYDRAULIC SYSTEM
CYLINDER GP
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Specifications
Tool Operating Manual
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Systems Operation
Cylinders (Boom, Stick and Bucket)
345D Excavator and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Hydraulic System
345D Excavator and 345D MHPU and 349D MHPU Mobile Hydraulic Power Units Hydraulic System
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Contamination Control Guidelines
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Cylinder Drift - Check - Empty Bucket
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Hydraulic System
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Hydraulic System
Cylinder Drift - Check - Loaded Bucket
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Hydraulic System
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Hydraulic System
Relief Valve (Counterweight Cylinder) - Test and Adjust
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Hydraulic System
345D MHPU and 349D MHPU Mobile Hydraulic Power Units Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the
Service Magazine
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Caterpillar Parts SIS Catalog 345D :
Truck sale:
Caterpillar 345D, Crawler Excavators, Construction
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI