SERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITSBASIC ENGINE
LIFTING GP-ENGINEAIR COMPRESSOR GP
MOUNTING GP-ENGINE
MOUNTING GP-STARTING MOTOR
PAN GP-OIL
PISTON & ROD GP
CYLINDER BLOCK GP
SERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITS
#SEBP57220080
458-9490: KIT-REAR COVER GASKET
458-9490 KIT-REAR COVER GASKET
S/N TFS1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@431-1457@@@@@
S/N TFS1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@431-1457@@@@@
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 9Y-6089 | [2] | GASKET | ||
| 528-5684 | [1] | SEAL GP-CRANKSHAFT | ||
| 061-9455 | [1] | SEAL-O-RING | ||
| 214-7567 | [2] | SEAL-O-RING | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 238-5084 | [1] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP57220081
350-3639: LIFTING GP-ENGINE
350-3639 LIFTING GP-ENGINE
S/N MME1-UP; MYE1-UP
PART OF 365-4046, 369-6681, 431-1441, 431-1457 ENGINE AR-COMPLETE
S/N MME1-UP; MYE1-UP
PART OF 365-4046, 369-6681, 431-1441, 431-1457 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS#SEBP57220082
344-0365: MOUNTING GP-ALTERNATOR & COMPR
344-0365 MOUNTING GP-ALTERNATOR & COMPR
S/N MME1-UP; MYE1-UP
PART OF 365-4046, 369-6681, 431-1441, 431-1457 ENGINE AR-COMPLETE
FOR USE WITH PAD MOUNTED ALTERNATOR AND COMPRESSOR
CANNOT BE USED WITH FAN DRIVES
S/N MME1-UP; MYE1-UP
PART OF 365-4046, 369-6681, 431-1441, 431-1457 ENGINE AR-COMPLETE
FOR USE WITH PAD MOUNTED ALTERNATOR AND COMPRESSOR
CANNOT BE USED WITH FAN DRIVES
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 243-2310 H | [2] | COVER | |
| 2. | 333-1207 | [2] | IDLER AS | |
| 3. | 506-7646 | [1] | BRACKET-SUPPORT | |
| 4. | 347-7963 | [1] | TENSIONER-BELT | |
| 5. | 279-2589 | [1] | PULLEY AS-IDLER (8-GROOVE) | |
| 6. | 6V-3822 M | [3] | BOLT (M10X1.5X35-MM) | |
| 7. | 6V-5230 M | [4] | BOLT (M10X1.5X60-MM) | |
| 8. | 6V-5839 | [7] | WASHER (11X21X2.5-MM THK) | |
| 9. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4178 M | [1] | BOLT (M10X1.5X90-MM) | |
| H | NOT FUW IDLER AS 333-1207 | |||
| M | METRIC PART | |||
#SEBP57220083
316-3495: MOUNTING GP-ENGINE & XMSN
316-3495 MOUNTING GP-ENGINE & XMSN
S/N TFS1-1416
PART OF 315-2777 INSTALLATION AR-ENGINE
S/N TFS1-1416
PART OF 315-2777 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9W-7385 | [4] | SLEEVE | |
| 2. | 9W-7388 | [4] | WASHER (26X144X12-MM THK) | |
| 3. | 138-4144 | [2] | BRACKET AS | |
| 4. | 241-3799 | [4] | MOUNT AS | |
| 5. | 7X-2563 M | [8] | BOLT (M20X2.5X60-MM) | |
| 6. | 7X-7729 | [11] | WASHER (11X25X3-MM THK) | |
| 7. | 8C-3290 M | [4] | BOLT (M24X3X150-MM) | |
| 8. | 8T-4123 | [8] | WASHER (22X35X3.5-MM THK) | |
| 9. | 8T-4167 | [4] | WASHER-HARD (26X44X4-MM THK) | |
| 10. | 8T-4195 M | [11] | BOLT (M10X1.5X30-MM) | |
| M | METRIC PART | |||
#SEBP57220084
316-3495: MOUNTING GP-ENGINE & XMSN
316-3495 MOUNTING GP-ENGINE & XMSN
S/N TFS1417-UP
PART OF 315-2777 INSTALLATION AR-ENGINE
S/N TFS1417-UP
PART OF 315-2777 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9W-7385 | [4] | SLEEVE | |
| 2. | 8Y-7119 C | [4] | WASHER (26X144X12-MM THK) | |
| 3. | 365-0290 C | [2] | MOUNT AS | |
| 4. | 241-3799 | [4] | MOUNT AS | |
| 5. | 7X-2563 M | [8] | BOLT (M20X2.5X60-MM) | |
| 6. | 7X-7729 | [11] | WASHER (11X25X3-MM THK) | |
| 7. | 8C-3290 M | [4] | BOLT (M24X3X150-MM) | |
| 8. | 8T-4123 | [8] | WASHER (22X35X3.5-MM THK) | |
| 9. | 8T-4167 | [4] | WASHER-HARD (26X44X4-MM THK) | |
| 10. | 8T-4195 M | [11] | BOLT (M10X1.5X30-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP57220085
367-2759: MOUNTING GP-STARTING MOTOR
367-2759 MOUNTING GP-STARTING MOTOR
S/N MME1-UP; MYE1-UP
24-VOLT, RH. PROVIDES STARTER WITHOUT GROUNDING HARDWARE
PART OF 365-4046, 369-6681, 431-1441, 431-1457 ENGINE AR-COMPLETE
FOR USE WITH RH STARTER CONFIGURATIONS
CANNOT BE USED WITH LH STARTER CONFIGURATIONS
S/N MME1-UP; MYE1-UP
24-VOLT, RH. PROVIDES STARTER WITHOUT GROUNDING HARDWARE
PART OF 365-4046, 369-6681, 431-1441, 431-1457 ENGINE AR-COMPLETE
FOR USE WITH RH STARTER CONFIGURATIONS
CANNOT BE USED WITH LH STARTER CONFIGURATIONS
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS#SEBP57220086
352-9949: PAN GP-OIL
352-9949 PAN GP-OIL
S/N MME1-UP; MYE1-UP
PART OF 365-4046, 369-6681, 431-1441, 431-1457 ENGINE AR-COMPLETE
FOR USE WITH @@@@@287-7841@@@@@, @@@@@348-8189@@@@@, @@@@@352-4168@@@@@, OIL PAN WITH OIL LEVEL SENSOR ON LH SIDE OF ENGINE
S/N MME1-UP; MYE1-UP
PART OF 365-4046, 369-6681, 431-1441, 431-1457 ENGINE AR-COMPLETE
FOR USE WITH @@@@@287-7841@@@@@, @@@@@348-8189@@@@@, @@@@@352-4168@@@@@, OIL PAN WITH OIL LEVEL SENSOR ON LH SIDE OF ENGINE
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 190-6114 | [1] | GASKET-OIL PAN (ENGINE) | |
| 2. | 367-8000 | [1] | PAN-OIL | |
| 3. | 398-5596 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 360-3680 | [1] | PLUG | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 4. | 329-3706 | [6] | STUD (M8X1.25X42.25-MM, 22.00-MM) | |
| 5. | 346-1581 | [2] | STUD | |
| 6. | 6V-3918 M | [24] | BOLT (M8X1.25X50-MM) | |
| 7. | 9M-1974 | [32] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
#SEBP57220087
342-6646: PISTON & ROD GP
342-6646 PISTON & ROD GP
S/N MME1-UP; MYE1-UP
17.0:1 COMPRESSION RATIO
PART OF 347-0103, 528-7187 ENGINE AR-CORE
S/N MME1-UP; MYE1-UP
17.0:1 COMPRESSION RATIO
PART OF 347-0103, 528-7187 ENGINE AR-CORE
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 524-5566 | [1] | PIN-PISTON | |
| 2. | 256-9658 | [1] | ROD AS-CONNECTING | |
| 160-8197 M | [2] | BOLT (M12X1.25X62-MM) | ||
| 3. | 471-0275 | [1] | RING-PISTON (INTERMEDIATE) | |
| 4. | 262-2891 | [1] | RING-PISTON (OIL) | |
| 5. | 269-7290 | [1] | BEARING-CONNECTING ROD (STANDARD) | |
| 282-2478 AB | BEARING-CONNECTING ROD (0.25-MM US) | |||
| 282-2479 AB | BEARING-CONNECTING ROD (0.51-MM US) | |||
| 6. | 273-2600 | [1] | TUBE AS-OIL JET | |
| 7. | 300-1319 | [1] | RING-PISTON (TOP) | |
| 8. | 357-0447 | [1] | BODY AS-PISTON | |
| 9. | 6V-3940 M | [1] | BOLT (M8X1.25X25-MM) | |
| 10. | 6V-5589 | [2] | RING-RETAINING | |
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP57220088
275-4260: PLUG GP-CYLINDER BLOCK
275-4260 PLUG GP-CYLINDER BLOCK
S/N MME1-UP; MYE1-UP
PROVIDES AN O-RING PORT PLUG FOR THE REAR OF THE BLOCK, FOR USE WITH ENGINES NOT USING A JACKET WATER HEATER., SEE 350-5472 FOR JACKET WATER HEATER INSTALLATION LOCATION.
PART OF 365-4046, 369-6681, 431-1441, 431-1457 ENGINE AR-COMPLETE
S/N MME1-UP; MYE1-UP
PROVIDES AN O-RING PORT PLUG FOR THE REAR OF THE BLOCK, FOR USE WITH ENGINES NOT USING A JACKET WATER HEATER., SEE 350-5472 FOR JACKET WATER HEATER INSTALLATION LOCATION.
PART OF 365-4046, 369-6681, 431-1441, 431-1457 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS#SEBP57220089
275-8699: PLUG GP-CYLINDER BLOCK
275-8699 PLUG GP-CYLINDER BLOCK
S/N MME1-UP; MYE1-UP
PART OF 365-4046, 369-6681, 431-1441, 431-1457 ENGINE AR-COMPLETE
S/N MME1-UP; MYE1-UP
PART OF 365-4046, 369-6681, 431-1441, 431-1457 ENGINE AR-COMPLETE
For full view, you need register
