IMPLEMENTS
CONTROL GPOPERATOR STATION
ADJUSTER GP-CONTROLSEAT GP
AIR CONDITIONER GP
IMPLEMENTS
CONTROL GP
#SEBP57220980
277-4812: LINK GP-BUCKET
277-4812 LINK GP-BUCKET
S/N TFS1-UP
PART OF 328-8770, 369-3309 LUBRICATION AR-AUTOMATIC
S/N TFS1-UP
PART OF 328-8770, 369-3309 LUBRICATION AR-AUTOMATIC
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS#SEBP57220981
280-0480: LINK GP-BUCKET
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS#SEBP57220982
361-5017: ADJUSTER GP-CONTROL
361-5017 ADJUSTER GP-CONTROL
S/N TFS1-UP
PART OF 361-5015 SUPPORT GP-HYDRAULIC CONTROL
S/N TFS1-UP
PART OF 361-5015 SUPPORT GP-HYDRAULIC CONTROL
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6F-9974 | [2] | PLUG-CORE | |
| 2. | 161-2398 | [2] | SEAL-LIP TYPE | |
| 3. | 244-2095 | [1] | ROD | |
| 4. | 244-2109 | [1] | ROD-ADJUSTMENT | |
| 5. | 244-2115 | [1] | PIN | |
| 6. | 267-9552 | [2] | SPACER (19X76X.8-MM THK) | |
| 7. | 267-9553 | [1] | SPACER (7X12.5X6.5-MM THK) | |
| 8. | 267-9554 | [2] | BEARING | |
| 9. | 267-9555 | [2] | BEARING | |
| 10. | 267-9556 | [2] | BEARING | |
| 11. | 267-9834 | [1] | PLATE | |
| 12. | 280-3512 | [1] | HOUSING | |
| 13. | 280-3514 | [1] | SUPPORT-ARM | |
| 14. | 282-2033 | [1] | BUTTON-PUSH | |
| 15. | 282-6695 | [1] | BRACKET | |
| 16. | 289-2073 | [1] | FILM-INFORMATION (ARMREST ADJUSTMENT) | |
| 17. | 266-3214 | [1] | PIN | |
| 18. | 3E-4353 | [2] | WASHER-HARD (11X25X3-MM THK) | |
| 19. | 7D-7453 | [1] | SETSCREW (1/4-20-THD) | |
| 20. | 7D-9708 | [1] | BOLT-SPECIAL | |
| 21. | 9X-2040 M | [2] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | |
| 22. | 9X-2043 M | [1] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| M | METRIC PART | |||
#SEBP57220983
214-0783: AIR COMPRESSOR GP-SEAT
214-0783 AIR COMPRESSOR GP-SEAT -HEAVY-DUTY
S/N TFS1-UP
FIELD REPLACEMENT FOR @@@@@237-3970@@@@@
S/N TFS1-UP
FIELD REPLACEMENT FOR @@@@@237-3970@@@@@
For full view, you need register
#SEBP57220984
237-3970: AIR COMPRESSOR GP-SEAT
237-3970 AIR COMPRESSOR GP-SEAT -HEAVY-DUTY
S/N TFS1-UP
FOR OPTIONAL FIELD REPLACEMENT ORDER 211-5358 CONDUIT (100-CM), 5P-6010 TUBE (1-M)
PART OF 191-2933 SUSPENSION GP-SEAT
FIELD REPLACEMENT ORDER @@@@@397-6405@@@@@, @@@@@214-0783@@@@@
S/N TFS1-UP
FOR OPTIONAL FIELD REPLACEMENT ORDER 211-5358 CONDUIT (100-CM), 5P-6010 TUBE (1-M)
PART OF 191-2933 SUSPENSION GP-SEAT
FIELD REPLACEMENT ORDER @@@@@397-6405@@@@@, @@@@@214-0783@@@@@
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP57220985
289-9192: AIR CONDITIONER & MOUNTING GP
289-9192 AIR CONDITIONER & MOUNTING GP
S/N TFS1-UP
PART OF 279-0243 AIR CONDITIONER GP
S/N TFS1-UP
PART OF 279-0243 AIR CONDITIONER GP
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 288-8557 Y | [1] | CONTROL AS-A/C & HEATER (BLOWER FAN SPEED) | |
| 3. | 289-9193 Y | [1] | AIR CONDITIONER GP | |
| 4. | 290-2287 | [1] | FILTER ELEMENT-CAB AIR (STANDARD FILTRATION) | |
| 5. | 101-2867 | [1] | WASHER-HARD (7.2X25X2-MM THK) | |
| 6. | 130-5300 | [2] | CLIP | |
| 7. | 210-3322 | [2] | STUD | |
| 8. | 8T-4138 M | [10] | BOLT (M6X1X20-MM) | |
| 9. | 9X-2043 M | [1] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 10. | 9X-2044 M | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 11. | 9X-8256 | [12] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57220986
279-0243: AIR CONDITIONER GP
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS#SEBP57220987
279-0243: AIR CONDITIONER GP
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS#SEBP57220988
289-9193: AIR CONDITIONER GP
289-9193 AIR CONDITIONER GP
S/N TFS1-UP
PART OF 289-9192 AIR CONDITIONER & MOUNTING GP
S/N TFS1-UP
PART OF 289-9192 AIR CONDITIONER & MOUNTING GP
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [3] | STRAP-CABLE | |
| 2. | 096-4034 M | [4] | BOLT-WING (M6X1X15-MM) | |
| 3. | 133-8714 | [1] | GROMMET | |
| 4. | 206-1345 | [3] | STRAP-CABLE | |
| 5. | 225-4986 M | [2] | NUT (M18X1.5-THD) | |
| 6. | 233-6131 | [1] | SENSOR GP-TEMPERATURE (EVAPORATOR) | |
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 153-5043 H | SLEEVE (1-DM) | |||
| 230-4012 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 7. | 256-6454 | [1] | SENSOR-TEMPERATURE (2-PIN)(RECIRCULATION) | |
| 7A. | 256-6454 | [1] | SENSOR-TEMPERATURE (2-PIN)(CHARGE AIR) | |
| 8. | 290-2288 | [1] | FILTER-AIR | |
| 9. | 291-9129 | [1] | CASE | |
| 10. | 291-9130 | [1] | PAN-DRAIN | |
| 11. | 291-9132 | [1] | CASE AS | |
| 12. | 291-9133 | [1] | COIL AS-EVAPORATOR | |
| 325-4416 M | [2] | STUD (M8X1.25X52-MM) | ||
| 327-0282 | [1] | SEAL-INTEGRAL (1/2-IN) | ||
| 327-0283 | [1] | SEAL-INTEGRAL (3/4-IN) | ||
| 13. | 291-9135 | [1] | PLATE AS | |
| 14. | 291-9146 | [1] | PLATE | |
| 15. | 291-9147 | [1] | PLATE | |
| 16. | 291-9148 Y | [1] | VALVE GP-WATER | |
| 17. | 302-8727 | [1] | SEAL | |
| 18. | 302-8935 | [2] | SEAL | |
| 19. | 302-9104 | [1] | SEAL | |
| 20. | 303-0955 | [1] | GASKET | |
| 21. | 303-1297 | [1] | SEAL | |
| 22. | [1] | SEAL | ||
| 23. | 322-4474 | [1] | FILM-INFORMATION (24-VOLT HEATER) | |
| 24. | 323-5864 | [2] | VALVE | |
| 25. | 325-3363 | [1] | BRACKET AS | |
| 26. | 340-4192 | [2] | GROMMET | |
| 27. | 346-1081 | [1] | HARNESS AS-HEATER & AIR COND | |
| 8T-8737 | [3] | PLUG-SEAL | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 9X-3402 | [23] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [23] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4011 | [3] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 274-3774 | [1] | CAP-CONNECTOR | ||
| 329-3734 E | TAPE-ELECTRICAL (187-CM) | |||
| 28. | 248-6772 | [2] | SCREW-MACHINE (8-16X7.75-IN) | |
| 29. | 275-6706 | [1] | MOTOR AS-BLOWER (24-VOLT) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 30. | 275-6710 | [4] | RETAINER (PUSH ON) | |
| 31. | 291-9134 | [1] | COIL AS-HEATER | |
| 32. | 302-9140 | [1] | SEAL | |
| 33. | 8T-0337 M | [9] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 34. | 8T-4138 M | [14] | BOLT (M6X1X20-MM) | |
| 35. | 8T-4205 | [14] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 36. | 9X-2044 M | [21] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 37. | 9X-2488 | [2] | CLAMP-HOSE | |
| 38. | 136-1953 E | HOSE (11-CM) | ||
| 39. | 267-8575 H | TUBE (6.5-DM EACH) | ||
| 40. | 420-5329 | [1] | GASKET | |
| 41. | 5P-5930 D | SEAL (0.1-M EACH) | ||
| 42. | 5P-5672 D | SEAL (0.8-M) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| H | ORDER BY THE DECIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57220989
431-5057: AIR CONDITIONER GP
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [4] | STRAP-CABLE | |
| 2. | 119-6105 | [1] | GROMMET | |
| 3. | 133-8714 | [1] | GROMMET | |
| 4. | 206-1345 | [3] | STRAP-CABLE | |
| 5. | 225-4986 M | [2] | NUT (M18X1.5-THD) | |
| 6. | 233-6131 | [1] | SENSOR GP-TEMPERATURE (EVAPORATOR) | |
| 7. | 256-6454 | [2] | SENSOR-TEMPERATURE (2-PIN)(AIR OUTLET) | |
| 8. | 290-2288 | [1] | FILTER-AIR | |
| 9. | 291-9130 | [1] | PAN-DRAIN | |
| 10. | 291-9132 | [1] | CASE AS | |
| 11. | 291-9133 | [1] | COIL AS-EVAPORATOR | |
| 325-4416 M | [2] | STUD (M8X1.25X52-MM) | ||
| 327-0282 | [1] | SEAL-INTEGRAL (1/2-IN) | ||
| 327-0283 | [1] | SEAL-INTEGRAL (3/4-IN) | ||
| 12. | 291-9135 | [1] | PLATE AS | |
| 13. | 291-9146 | [1] | PLATE | |
| 14. | 291-9147 | [1] | PLATE | |
| 15. | 291-9148 Y | [1] | VALVE GP-WATER (FLOW CONTROL) | |
| 16. | 302-8727 | [1] | SEAL | |
| 17. | 302-8935 | [2] | SEAL | |
| 18. | 302-9104 | [1] | SEAL | |
| 19. | 303-0955 | [1] | GASKET | |
| 20. | 303-1297 | [1] | SEAL | |
| 21. | 5P-5923 D | SEAL (1-M) | ||
| 22. | 322-4474 | [1] | FILM-INFORMATION (24-VOLT HEATER) | |
| 23. | 323-5864 | [2] | VALVE | |
| 24. | 325-3363 | [1] | BRACKET AS | |
| 25. | 340-4192 | [2] | GROMMET | |
| 26. | 346-1081 Y | [1] | HARNESS AS-HEATER & AIR COND | |
| 27. | 361-5586 | [1] | BLOWER AS (24-VOLT) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLES AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 28. | 420-5329 | [1] | GASKET | |
| 29. | 431-5059 Y | [1] | HARNESS AS-WIRING | |
| 30. | [1] | CASE | ||
| 31. | 096-4034 M | [4] | BOLT-WING (M6X1X15-MM) | |
| 32. | 248-6772 | [2] | SCREW-MACHINE (8-16X7.75-IN) | |
| 33. | 275-6710 | [4] | RETAINER (PUSH ON) | |
| 34. | 291-9134 | [1] | COIL AS-HEATER | |
| 35. | 302-9140 | [1] | SEAL | |
| 36. | 8T-0337 M | [9] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 37. | 8T-4138 M | [14] | BOLT (M6X1X20-MM) | |
| 38. | 8T-4205 | [14] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 39. | 9X-2044 M | [21] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 40. | 9X-2488 | [2] | CLAMP-HOSE | |
| 41. | 136-1953 E | HOSE (11-CM) | ||
| 42. | 5P-5930 D | SEAL (0.06-M EACH) | ||
| 43. | 5P-5672 D | SEAL (1.5-M) | ||
| 44. | 267-8575 J | TUBE (6.4-DM EACH) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| J | ORDER BY THE DECIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
