OPERATOR STATION
CONTROL GP-JOYSTICKCONTROL GP-STEERING
CONTROL GP-TRANSMISSION
ELECTRICAL AND STARTING SYSTEM
CONTROL GP-UNPROGRAMMEDOPERATOR STATION
BOX GP-STORAGECAB GP
MONITOR GP
DOOR GP
OPERATOR STATION
CONTROL GP-JOYSTICK
#SEBP57221050
458-8675: CONTROL GP-JOYSTICK
458-8675 CONTROL GP-JOYSTICK -4-VALVE
S/N TFS1-UP
PART OF 392-7095 CONTROL & MTG GP-ELHYD
FIELD REPLACEMENT FOR @@@@@328-5930@@@@@
S/N TFS1-UP
PART OF 392-7095 CONTROL & MTG GP-ELHYD
FIELD REPLACEMENT FOR @@@@@328-5930@@@@@
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 328-5935 Y | [1] | CONTROL GP-JOYSTICK (4-VALVE) | |
| 2. | 455-1861 | [1] | BASE AS-JOYSTICK | |
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 280-0440 M | [4] | STUD-MOUNTING (M6X1-THD) | ||
| 281-3136 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 3. | 285-0150 | [1] | BOOT | |
| 4. | 281-3136 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | |
| 5. | 260-6728 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN) | |
| 6. | 9X-3401 | [18] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57221051
359-6701: CONTROL GP-STEERING
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 500-6467 | [1] | CAP | |
| 2. | 8R-2918 | [1] | KNOB AS | |
| 8T-4244 M | [1] | NUT (M12X1.75-THD) | ||
| 3. | 363-5911 | [1] | STEERING WHEEL AS | |
| 363-6423 | [1] | PLUG | ||
| 4. | 301-0002 | [1] | SENSOR GP-POSITION (STEERING) | |
| 5. | 462-1016 Y | [1] | CONTROL GP-TRANSMISSION (HMU) | |
| 7. | 312-7750 | [1] | MOTOR AS-CONTROL | |
| 8. | 350-1110 J | [1] | STEERING COLUMN GP | |
| 9. | 392-0823 | [1] | BRACKET AS | |
| 10. | 358-3828 Y | [1] | WIRING GP-CAB | |
| 11. | 371-2892 | [1] | SLEEVE | |
| 12. | 371-7097 | [1] | BRACKET AS | |
| 13. | 371-7098 | [1] | BRACKET AS | |
| 14. | 371-7099 | [1] | BRACKET | |
| 15. | 371-7100 | [1] | BRACKET | |
| 16. | 0L-0723 | [1] | WASHER (0.656X0.906X0.049-IN THK) | |
| 17. | 095-0917 | [1] | RING-RETAINING | |
| 18. | 8C-6364 M | [8] | BOLT-SOCKET HEAD (M5X0.8X14-MM) | |
| 19. | 3S-2093 | [4] | STRAP-CABLE | |
| 20. | 5C-7261 M | [8] | NUT (M8X1.25-THD) | |
| 21. | 5C-9553 M | [8] | BOLT (M6X1X16-MM) | |
| 22. | 5P-4116 | [8] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 24. | 7X-7729 | [9] | WASHER (11X25X3-MM THK) | |
| 26. | 8T-0328 | [8] | WASHER-HARD (5.5X10X1-MM THK) | |
| 27. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 28. | 8T-4137 M | [7] | BOLT (M10X1.5X20-MM) | |
| 29. | 8T-4191 M | [2] | BOLT (M10X1.5X16-MM) | |
| 30. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 31. | 8T-7547 M | [4] | BOLT (M8X1.25X30-MM) | |
| 32. | 9X-2041 M | [4] | SCREW-TRUSS HEAD (M10X1.5X20-MM) | |
| 33. | 9X-6032 M | [4] | BOLT-SOCKET HEAD (M10X1.5X30-MM) | |
| 34. | 9X-8256 | [8] | WASHER (6.6X12X2-MM THK) | |
| 35. | 7X-7877 E | STRIP-EDGE (14-CM) | ||
| 36. | 361-2566 | [1] | COVER | |
| 37. | 174-8131 M | [3] | SCREW-TRUSS HEAD (M4X0.7X12-MM) | |
| 38. | 394-3704 | [1] | KIT-BOLT (STEERING UNIVERSAL JOINT) | |
| (INCLUDES LOCKWASHER & BOLT) | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 149-2906 J | [1] | KIT-NUT | ||
| (KIT INCLUDES NUTS) | ||||
| E | ORDER BY THE CENTIMETER | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57221052
462-1016: CONTROL GP-TRANSMISSION
462-1016 CONTROL GP-TRANSMISSION
S/N TFS1-UP
PART OF 359-6701 CONTROL GP-STEERING
S/N TFS1-UP
PART OF 359-6701 CONTROL GP-STEERING
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 8T-8730 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | |
| 3. | 8T-8729 | [9] | PIN-CONNECTOR (16-GA TO 20-GA) | |
| 4. | 101-9161 | [1] | WIRE AS | |
| 5. | 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | |
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 6. | 9G-3695 | [2] | PLUG-SEAL | |
#SEBP57221053
391-7036: CONTROL GP-UNPRGMED MONITOR
391-7036 CONTROL GP-UNPRGMED MONITOR
S/N TFS880-UP
PART OF 346-1054 WIRING GP-CAB
S/N TFS880-UP
PART OF 346-1054 WIRING GP-CAB
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 276-4053 | [1] | FILM-IDENTIFICATION (CAT) |
#SEBP57221054
367-3862: COVER GP-ACCESS
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS#SEBP57221055
291-4809: COVER GP-CAB
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 345-7725 M | [2] | SCREW-TRUSS HEAD (M12X1.75X25-MM) | |
| 2. | 296-6748 | [1] | COVER AS (HVAC) | |
| 3. | 296-6750 | [1] | COVER AS (HVAC) | |
| 4. | 296-6751 | [1] | SEAL | |
| 5. | 296-6752 | [1] | SEAL | |
| 6. | 299-3204 | [1] | SEAL | |
| 7. | 299-3208 | [1] | BRACKET | |
| 8. | 299-3210 | [1] | COVER AS (HVAC) | |
| 9. | 299-3212 | [1] | DUCT AS | |
| 10. | 336-9927 | [4] | LATCH AS | |
| 11. | 340-2580 | [2] | HINGE AS | |
| 12. | 340-2581 | [2] | HINGE AS | |
| 13. | 352-4145 | [2] | KEEPER | |
| 14. | 368-0571 M | [2] | SCREW-MACHINE (M4X0.7X16-MM) | |
| 15. | 138-8454 M | [24] | SCREW-TRUSS HEAD (M4X0.7X10-MM) | |
| 16. | 2G-8096 | [1] | MOUNTING | |
| 17. | 6P-5560 | [2] | GROMMET | |
| 18. | 9X-2038 | [18] | WASHER (7X19X2-MM THK) | |
| 19. | 9X-2043 M | [13] | SCREW-TRUSS HEAD (M6X1X14-MM) | |
| 20. | 9X-2044 M | [2] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 21. | 9X-2046 M | [3] | SCREW-TRUSS HEAD (M6X1X35-MM) | |
| 22. | 3E-6602 E | SEAL (179.5-CM) | ||
| 22A. | 3E-6602 E | SEAL (46-CM) | ||
| 22B. | 3E-6602 E | SEAL (13.5-CM) | ||
| 23. | 3E-3805 E | SEAL (117.5-CM EACH) | ||
| 24. | 5P-7848 M | [2] | NUT (M4X0.7-THD) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP57221056
291-4809: COVER GP-CAB
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-7848 M | [2] | NUT (M4X0.7-THD) | |
| 2. | 296-6748 | [1] | COVER AS (HVAC)(MAIN) | |
| 3. | 296-6750 | [1] | COVER AS (HVAC)(TOP) | |
| 4. | 296-6751 | [1] | SEAL | |
| 5. | 296-6752 | [1] | SEAL | |
| 6. | 299-3204 | [1] | SEAL | |
| 7. | 103-2554 E | SEAL (115-CM EACH) | ||
| 8. | 299-3210 | [1] | COVER AS (HVAC)(BOTTOM) | |
| 9. | 352-4144 C | [1] | DUCT-INLET | |
| 10. | 336-9927 | [4] | LATCH AS | |
| 11. | 340-2580 | [2] | HINGE AS | |
| 12. | 340-2581 | [2] | HINGE AS | |
| 13. | 352-4145 | [2] | KEEPER | |
| 14. | 368-0571 M | [2] | SCREW-MACHINE (M4X0.7X16-MM) | |
| 15. | 138-8454 M | [24] | SCREW-TRUSS HEAD (M4X0.7X10-MM) | |
| 16. | 2G-8096 | [1] | MOUNTING | |
| 17. | 6P-5560 | [2] | GROMMET | |
| 18. | 9X-2038 C | [3] | WASHER (7X19X2-MM THK) | |
| 19. | 128-2136 M | [13] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 20. | 3E-6602 E | SEAL (182-CM) | ||
| 20A. | 3E-6602 E | SEAL (46-CM) | ||
| 20B. | 3E-6602 E | SEAL (13.5-CM) | ||
| 21. | 9X-2046 M | [3] | SCREW-TRUSS HEAD (M6X1X35-MM) | |
| 22. | 541-2578 | [13] | WASHER-HARD (9.6X22X3-MM THK) | |
| 23. | 548-4375 | [13] | WASHER (9X18X8-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP57221057
352-7475: COVER GP-CAB
352-7475 COVER GP-CAB
S/N TFS1-UP
PART OF 331-9271 OPERATOR AR, 279-0210 OPERATOR AR-ENCLOSED ROPS
S/N TFS1-UP
PART OF 331-9271 OPERATOR AR, 279-0210 OPERATOR AR-ENCLOSED ROPS
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS#SEBP57221058
352-1695: DISPLAY GP-CAMERA
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7Y-7388 M | [4] | SCREW-BUTTON HEAD (M5X0.8X12-MM) | |
| 2. | 251-8248 | [1] | CABLE AS-COMMUNICATION | |
| 3. | 259-4399 | [2] | BASE | |
| 4. | 464-6047 | [1] | MODULE GP-DISPLAY (WORK AREA VISUAL SYSTEM) | |
| 8T-8729 | [5] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 344-3847 | [1] | CABLE AS (DISPLAY) | ||
| 5. | 270-3311 | [1] | CLAMP | |
| 6. | 333-8153 | [1] | CONNECTION AS | |
| 7. | 161-6984 M | [4] | SCREW-TRUSS HEAD (M5X0.8X20-MM) | |
| 8. | 4B-4274 | [8] | WASHER (5.5X13X1.2-MM THK) | |
| 9. | 7K-1181 | [9] | STRAP-CABLE | |
| M | METRIC PART | |||
#SEBP57221059
279-0239: DOOR GP-CAB
For full view, you need register
Parts for your 966K WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-7636 | [2] | PIN AS-SPRING | |
| 2. | 090-9555 | [2] | CLIP | |
| 3. | 119-9706 | [2] | STUD-BALL | |
| 4. | 214-9186 | [4] | BUTTON | |
| 5. | 252-1862 J | [1] | HANDLE AS-PULL | |
| 6. | 252-1863 | [1] | GASKET | |
| 7. | 269-2890 | [1] | CLEVIS | |
| 8. | 269-2892 | [1] | PIN | |
| 9. | 272-1623 | [1] | BELLCRANK AS | |
| 10. | 279-0941 | [1] | PLATE | |
| 11. | 292-8683 | [1] | SEAL AS | |
| 12. | 295-1918 | [1] | GLASS | |
| 13. | 362-3498 | [1] | STRIKER AS | |
| 14. | 423-3367 | [1] | ROD | |
| 15. | 382-9248 Y | [1] | WINDOW GP-DOOR (LH) | |
| 16. | 364-8313 | [1] | LATCH AS | |
| 17. | 367-2178 | [1] | SPRING-GAS (CAB DOOR, LH) | |
| 18. | 9X-2038 | [1] | WASHER (7X19X2-MM THK) | |
| 19. | 5C-9553 M | [3] | BOLT (M6X1X16-MM) | |
| 20. | 7X-7729 | [1] | WASHER (11X25X3-MM THK) | |
| 21. | 8T-4971 M | [4] | BOLT (M6X1X30-MM) | |
| 22. | 9X-6421 | [1] | RING-RETAINING | |
| 23. | 9X-2027 | [2] | WASHER (11X18X2-MM THK) | |
| 24. | 9X-2039 M | [1] | SCREW-TRUSS HEAD (M10X1.5X35-MM) | |
| 25. | 9X-2044 M | [5] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 26. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 27. | [1] | INSULATION | ||
| 28. | 378-6976 | [1] | SEAL | |
| 29. | 107-7497 | [4] | WASHER-THRUST (8.25X20X0.5-MM THK) | |
| 30. | 108-5471 | [2] | CLEVIS | |
| 31. | 6V-8185 | [1] | NUT (1/4-20-THD) | |
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
