AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

980K Wheel Loader GTZ00001-UP (MACHINE) POWERED BY C13 Engine BASIC ENGINE Caterpillar SIS



WHEEL LOADER 980K WHEEL LOADER GTZ
 980K Wheel Loader GTZ00001-UP (MACHINE) POWERED BY C13 Engine SEBP5729 980K GTZ   (2011)

Parts group 980K:

  For full view, you need register
BASIC ENGINE
AIR COMPRESSOR GP
MOUNTING GP-ALTERNATOR & COMPR
352-2010 MOUNTING GP-ALTERNATOR & COMPR
352-2010 MOUNTING GP-ALTERNATOR & COMPR
S/N TXM1-UP
PART OF 365-3525, 417-2604, 431-1463, 442-9565 ENGINE AR-COMPLETE
CAMSHAFT GP
CAMSHAFT GP
351-7364 CAMSHAFT GP
351-7364 CAMSHAFT GP
S/N TXM1-UP
PART OF 348-8232, 442-9561 ENGINE AR-CORE
CRANKSHAFT GP
CRANKSHAFT GP
224-3881 CRANKSHAFT GP
224-3881 CRANKSHAFT GP
S/N TXM1-UP
PART OF 348-8232, 442-9561 ENGINE AR-CORE
SEAL GP-CRANKSHAFT
116-1091 SEAL GP-CRANKSHAFT
116-1091 SEAL GP-CRANKSHAFT -REAR
S/N TXM1-UP
PART OF 365-3525 ENGINE AR-COMPLETE
SEAL GP-CRANKSHAFT
227-0838 SEAL GP-CRANKSHAFT
227-0838 SEAL GP-CRANKSHAFT -REAR
S/N TXM1-UP
COUNTER CLOCKWISE ROTATION
PART OF 252-6255 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
227-0838 SEAL GP-CRANKSHAFT
227-0838 SEAL GP-CRANKSHAFT -REAR
S/N TXM1-UP
COUNTER CLOCKWISE ROTATION
PART OF 252-6255 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
252-6255 SEAL GP-CRANKSHAFT
252-6255 SEAL GP-CRANKSHAFT
S/N TXM1-UP
PART OF 417-2604, 431-1463, 442-9565 ENGINE AR-COMPLETE
FOR USE WITH WET FLYWHEEL HOUSING
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
347-1267 COVER GP-CYLINDER BLOCK
347-1267 COVER GP-CYLINDER BLOCK
S/N TXM1-UP
PROVIDES COVERS FOR THE ENGINE OIL PUMP MANIFOLD WHEN NOT REQUIRED FOR OIL FILLERS
PART OF 365-3525, 417-2604, 431-1463, 442-9565 ENGINE AR-COMPLETE
CYLINDER BLOCK AS
361-4766 CYLINDER BLOCK AS
361-4766 CYLINDER BLOCK AS
S/N TXM1-UP
PART OF 361-4767 CYLINDER BLOCK AS
CYLINDER BLOCK AS
361-4767 CYLINDER BLOCK AS
361-4767 CYLINDER BLOCK AS
S/N TXM1-UP
PART OF 517-1983 CYLINDER BLOCK AS
CYLINDER BLOCK AS
517-1983 CYLINDER BLOCK AS
517-1983 CYLINDER BLOCK AS
S/N TXM1-UP
PART OF 240-7271 CYLINDER BLOCK GP
CYLINDER BLOCK GP
240-7271 CYLINDER BLOCK GP
240-7271 CYLINDER BLOCK GP
S/N TXM1-UP
PART OF 348-8232, 442-9561 ENGINE AR-CORE
PLUG GP-CYLINDER BLOCK
117-0165 PLUG GP-CYLINDER BLOCK
117-0165 PLUG GP-CYLINDER BLOCK
S/N TXM1-UP
REAR OIL GALLEY
PART OF 365-3525, 417-2604, 431-1463, 442-9565 ENGINE AR-COMPLETE
FOR USE WITH REAR GEAR GP
PLUG GP-CYLINDER BLOCK
223-3875 PLUG GP-CYLINDER BLOCK
223-3875 PLUG GP-CYLINDER BLOCK
S/N TXM1-UP
PART OF 365-3525, 417-2604, 431-1463, 442-9565 ENGINE AR-COMPLETE
PLUG GP-CYLINDER BLOCK
227-9545 PLUG GP-CYLINDER BLOCK
227-9545 PLUG GP-CYLINDER BLOCK
S/N TXM1-UP
PART OF 365-3525, 417-2604, 431-1463, 442-9565 ENGINE AR-COMPLETE
PLUG GP-ENGINE
352-4797 PLUG GP-ENGINE
352-4797 PLUG GP-ENGINE
S/N TXM1-UP
PART OF 365-3525, 417-2604, 431-1463, 442-9565 ENGINE AR-COMPLETE
CYLINDER HEAD GP
CYLINDER HEAD AS
331-1981 CYLINDER HEAD AS
331-1981 CYLINDER HEAD AS
S/N TXM1-UP
PART OF 331-2477 CYLINDER HEAD GP
CYLINDER HEAD GP
331-2477 CYLINDER HEAD GP
331-2477 CYLINDER HEAD GP
S/N TXM1-UP
PART OF 331-2478 CYLINDER HEAD GP
CYLINDER HEAD GP
331-2478 CYLINDER HEAD GP
331-2478 CYLINDER HEAD GP
S/N TXM1-UP
PART OF 348-8232, 442-9561 ENGINE AR-CORE
FASTENER GP-CYLINDER HEAD
198-4963 FASTENER GP-CYLINDER HEAD
198-4963 FASTENER GP-CYLINDER HEAD
S/N TXM1-UP
PART OF 331-2478 CYLINDER HEAD GP
PLUG GP-ENGINE
352-4797 PLUG GP-ENGINE
352-4797 PLUG GP-ENGINE
S/N TXM1-UP
PART OF 365-3525, 417-2604, 431-1463, 442-9565 ENGINE AR-COMPLETE
DAMPER GP
DAMPER & PULLEY GP
353-1701 DAMPER & PULLEY GP
353-1701 DAMPER & PULLEY GP
S/N TXM1-UP
PROVIDES A DAMPER GROUP WITH AN 8-RIB POLY-VEE CRANKSHAFT PULLEY
PART OF 365-3525, 417-2604, 431-1463, 442-9565 ENGINE AR-COMPLETE
DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
324-8090 DRIVE GP-ACCESSORY
324-8090 DRIVE GP-ACCESSORY
S/N GTZ1-UP
PART OF 324-8086 INSTALLATION AR-ENGINE
DRIVE GP-FAN
MOUNTING GP-FAN DRIVE
219-7440 MOUNTING GP-FAN DRIVE
219-7440 MOUNTING GP-FAN DRIVE
S/N TXM1-UP
PART OF 365-3525, 417-2604, 431-1463, 442-9565 ENGINE AR-COMPLETE
FLYWHEEL GP
FLYWHEEL GP
353-9820 FLYWHEEL GP
353-9820 FLYWHEEL GP
S/N TXM1-UP
PART OF 365-3525, 417-2604, 431-1463, 442-9565 ENGINE AR-COMPLETE
GEAR GP
GEAR GP-FRONT
222-3088 GEAR GP-FRONT
222-3088 GEAR GP-FRONT
S/N TXM1-UP
PART OF 348-8232, 442-9561 ENGINE AR-CORE
HOUSING GP-FRONT
218-7272 HOUSING GP-FRONT
218-7272 HOUSING GP-FRONT
S/N TXM1-UP
PART OF 365-3525, 417-2604, 431-1463, 442-9565 ENGINE AR-COMPLETE
HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
344-2904 HOUSING GP-FLYWHEEL
344-2904 HOUSING GP-FLYWHEEL
S/N TXM1-UP
PART OF 365-3525, 417-2604, 431-1463, 442-9565 ENGINE AR-COMPLETE
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
227-2574 COVER GP-FRONT HOUSING
227-2574 COVER GP-FRONT HOUSING
S/N TXM1-UP
PART OF 365-3525, 417-2604, 431-1463, 442-9565 ENGINE AR-COMPLETE
COVER GP-FRONT HOUSING
369-6374 COVER GP-FRONT HOUSING
369-6374 COVER GP-FRONT HOUSING
S/N TXM1-UP
PROVIDES A COVER GP WITH A STUD BOLT
PART OF 365-3525, 417-2604, 431-1463, 442-9565 ENGINE AR-COMPLETE
GEAR GP-FRONT
222-3088 GEAR GP-FRONT
222-3088 GEAR GP-FRONT
S/N TXM1-UP
PART OF 348-8232, 442-9561 ENGINE AR-CORE
HOUSING GP-FRONT
218-7272 HOUSING GP-FRONT
218-7272 HOUSING GP-FRONT
S/N TXM1-UP
PART OF 365-3525, 417-2604, 431-1463, 442-9565 ENGINE AR-COMPLETE
473-2192 KIT-FRONT COVER GASKET
473-2192 KIT-FRONT COVER GASKET
S/N GTZ1-UP
KIT CONTAINS THE GASKETS, SEALS & BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@365-3525@@@@@, @@@@@417-2604@@@@@, @@@@@442-9565@@@@@
LIFTING GP-ENGINE
LIFTING GP-ENGINE
224-0880 LIFTING GP-ENGINE
224-0880 LIFTING GP-ENGINE
S/N TXM1-UP
PART OF 365-3525, 417-2604, 431-1463, 442-9565 ENGINE AR-COMPLETE
MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR & COMPR
352-2010 MOUNTING GP-ALTERNATOR & COMPR
352-2010 MOUNTING GP-ALTERNATOR & COMPR
S/N TXM1-UP
PART OF 365-3525, 417-2604, 431-1463, 442-9565 ENGINE AR-COMPLETE
MOUNTING GP-ENGINE
MOUNTING GP-ENGINE & XMSN
324-8098 MOUNTING GP-ENGINE & XMSN
324-8098 MOUNTING GP-ENGINE & XMSN
S/N GTZ1-UP
PART OF 324-8086 INSTALLATION AR-ENGINE
SUPPORT GP-ENGINE
323-3955 SUPPORT GP-ENGINE
323-3955 SUPPORT GP-ENGINE
S/N TXM1-UP
PART OF 365-3525, 417-2604, 431-1463, 442-9565 ENGINE AR-COMPLETE
PAN GP-OIL
DRAIN GP-ENGINE OIL
324-8094 DRAIN GP-ENGINE OIL
324-8094 DRAIN GP-ENGINE OIL
S/N GTZ1-UP
PART OF 324-8086 INSTALLATION AR-ENGINE
PAN GP-OIL
350-1708 PAN GP-OIL
350-1708 PAN GP-OIL -ENGINE
S/N TXM1-UP
FRONT SUMP
PART OF 365-3525, 417-2604, 431-1463, 442-9565 ENGINE AR-COMPLETE
FOR USE WITH @@@@@338-0996@@@@@
PISTON & ROD GP
PISTON & ROD GP
342-6366 PISTON & ROD GP
342-6366 PISTON & ROD GP
S/N TXM1-2701
17:1 COMPRESSION RATIO
PART OF 348-8232 ENGINE AR-CORE
PISTON & ROD GP
384-4314 PISTON & ROD GP
384-4314 PISTON & ROD GP
S/N TXM2702-UP
17:1 COMPRESSION RATIO
PART OF 348-8232, 442-9561 ENGINE AR-CORE
PULLEY GP
DAMPER & PULLEY GP
353-1701 DAMPER & PULLEY GP
353-1701 DAMPER & PULLEY GP
S/N TXM1-UP
PROVIDES A DAMPER GROUP WITH AN 8-RIB POLY-VEE CRANKSHAFT PULLEY
PART OF 365-3525, 417-2604, 431-1463, 442-9565 ENGINE AR-COMPLETE
VALVE MECHANISM GP
BASE GP-VALVE COVER
332-3705 BASE GP-VALVE COVER
332-3705 BASE GP-VALVE COVER
S/N TXM1-UP
PART OF 346-5480 BASE GP-VALVE COVER
BASE GP-VALVE COVER
346-5480 BASE GP-VALVE COVER
346-5480 BASE GP-VALVE COVER
S/N TXM1-UP
PART OF 348-8232, 442-9561 ENGINE AR-CORE
COVER GP-VALVE MECHANISM
348-1731 COVER GP-VALVE MECHANISM
348-1731 COVER GP-VALVE MECHANISM
S/N TXM1-UP
PART OF 365-3525, 417-2604, 431-1463, 442-9565 ENGINE AR-COMPLETE
LIFTER GP-VALVE
237-4376 LIFTER GP-VALVE
237-4376 LIFTER GP-VALVE
S/N TXM1-UP
PART OF 326-1959 VALVE MECHANISM GP
MOUNTING GP-VALVE MECHANISM
229-8084 MOUNTING GP-VALVE MECHANISM
229-8084 MOUNTING GP-VALVE MECHANISM
S/N TXM1-UP
PART OF 365-3525, 417-2604, 431-1463, 442-9565 ENGINE AR-COMPLETE
ROCKER ARM GP
261-2294 ROCKER ARM GP
261-2294 ROCKER ARM GP -EXHAUST
S/N TXM1-UP
PART OF 396-4110, 444-1211, 458-2977 ROCKER ARM GP
ROCKER ARM GP
322-5762 ROCKER ARM GP
322-5762 ROCKER ARM GP
S/N TXM1-UP
PART OF 396-4110 ROCKER ARM GP
ROCKER ARM GP
385-4639 ROCKER ARM GP
385-4639 ROCKER ARM GP
S/N TXM1-UP
PART OF 396-4110, 444-1211, 458-2977 ROCKER ARM GP
ROCKER ARM GP
396-4110 ROCKER ARM GP
396-4110 ROCKER ARM GP
S/N TXM1-5383
PART OF 326-1959 VALVE MECHANISM GP
ROCKER ARM GP
444-1211 ROCKER ARM GP
444-1211 ROCKER ARM GP
S/N TXM5384-UP
PART OF 326-1959 VALVE MECHANISM GP
ROCKER ARM GP
444-1797 ROCKER ARM GP
444-1797 ROCKER ARM GP
S/N TXM5384-UP
PART OF 444-1211 ROCKER ARM GP
ROCKER ARM GP
458-2976 ROCKER ARM GP
458-2976 ROCKER ARM GP
S/N TXM5384-UP
PART OF 458-2977 ROCKER ARM GP
ROCKER ARM GP
458-2977 ROCKER ARM GP
458-2977 ROCKER ARM GP
S/N TXM5384-UP
PART OF 326-1959 VALVE MECHANISM GP
VALVE MECHANISM GP
326-1959 VALVE MECHANISM GP
326-1959 VALVE MECHANISM GP
S/N TXM1-UP
PART OF 348-8232 ENGINE AR-CORE
VALVE MECHANISM GP
326-1959 VALVE MECHANISM GP
326-1959 VALVE MECHANISM GP
S/N TXM1-5383
PART OF 348-8232 ENGINE AR-CORE
VALVE MECHANISM GP
326-1959 VALVE MECHANISM GP
326-1959 VALVE MECHANISM GP
S/N TXM5384-UP
PART OF 442-9561 ENGINE AR-CORE
VALVE MECHANISM GP
326-1959 VALVE MECHANISM GP
326-1959 VALVE MECHANISM GP
S/N TXM5384-UP
PART OF 442-9561 ENGINE AR-CORE
HOUSING GP-REAR
473-4534 KIT-REAR COVER GASKET
473-4534 KIT-REAR COVER GASKET
S/N GTZ1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@417-2604@@@@@, @@@@@442-9565@@@@@

Information:

(For parts list, see above)

Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
980K Wheel Loader
Specifications
Idler Pulley
C13 Engines for Caterpillar Built Machines
Idler Pulley
C13 Engines for Caterpillar Built Machines
Belt Tensioner - Fan Drive
C13 Engines for Caterpillar Built Machines
Belt Tensioner - Alternator and Compressor
C13 Engines for Caterpillar Built Machines
Belt Tensioner - Alternator and Compressor
C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Belt Tensioner - Remove and Install
C13
Engines for Caterpillar Built Machines
Belt Tensioner - Remove and Install
980K Wheel Loader C13 Engine Supplement
Systems Operation
Compression Brake
C13 Engines for Caterpillar Built Machines
Testing and Adjusting
Compression Brake Lash - Adjust
C13 Engines for Caterpillar Built Machines
Troubleshooting
Retarder - Test
C13, C15, and C18 Tier 4 Interim Engines
Engine News
New Camshafts Are Used for Certain C27 and C32 Commercial Engines {1210}
2014/05/20
Specifications
Camshaft
C13 Engines for Caterpillar Built Machines
Camshaft
C13 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft - Remove
C13
Engines for Caterpillar Built Machines
Camshaft - Install
C13
Engines for Caterpillar Built Machines
Camshaft Gear - Remove and Install
C13
Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C13
Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C13
Engines for Caterpillar Built Machines
Service Magazine
Improved Camshafts Are Now Used on Certain C27 and C32 Machines {1210}
2014/05/30
Improved Reman Camshafts Are Now Used on Certain C27 and C32 Machines {1209, 1210}
2014/05/30
Cat<SUP>&reg;</SUP> Reman Has Added Valve Actuators, Valve Lifters, Rocker Arms, and Camshafts for Certain Machine Engines {1121, 1130, 1209, 1210}
2014/09/05
Disassembly and Assembly
Refrigerant Compressor - Remove and Install
C13
Engines for Caterpillar Built Machines
Engine News
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Engines {1202}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Engines {1202}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REAR CRANKSHAFT SEALS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REAR CRANKSHAFT SEALS FROM DEALER PARTS STOCK
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REAR CRANKSHAFT SEALS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REAR CRANKSHAFT SEALS FROM DEALER PARTS STOCK
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REAR CRANKSHAFT SEALS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REAR CRANKSHAFT SEALS FROM DEALER PARTS STOCK
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REAR CRANKSHAFT SEALS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REAR CRANKSHAFT SEALS FROM DEALER PARTS STOCK
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REAR CRANKSHAFT SEALS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REAR CRANKSHAFT SEALS FROM DEALER PARTS STOCK
Specifications
Crankshaft Seals
C13 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C13 Engines for Caterpillar Built Machines
Crankshaft
C13 Engines for Caterpillar Built Machines
Main Bearing Journal
C13 Engines for Caterpillar Built Machines
Crankshaft
C13 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REAR CRANKSHAFT SEALS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REAR CRANKSHAFT SEALS FROM DEALER PARTS STOCK
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REAR CRANKSHAFT SEALS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REAR CRANKSHAFT SEALS FROM DEALER PARTS STOCK
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Information Release Memo
Cat Reman Announces Additional Upgrade-To-New Crankshafts for Cat&reg; Machine Applications
Cat Reman Announces Additional Upgrade-To-New Crankshafts for Cat® Machine Applications
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REAR CRANKSHAFT SEALS FROM DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REAR CRANKSHAFT SEALS FROM DEALER PARTS STOCK
Testing and Adjusting
Excessive Bearing Wear - Inspect
C13 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Crankshaft Rear Seal - Remove and Install
C13
Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove and Install
C13
Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C13
Engines for Caterpillar Built Machines
Crankshaft - Install
C13
Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C13
Engines for Caterpillar Built Machines
Crankshaft - Remove
C13
Engines for Caterpillar Built Machines
Bearing Clearance - Check
C13
Engines for Caterpillar Built Machines
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
A New Crankcase Seal is Now Used for Certain 980K Wheel Loaders {1160, 1161}
2013/03/05
Updated Reuse And Salvage Guidelines for C27 and C32 Machine Engines {1202, 1218}
2015/04/10
Improved Crankshaft Rear Seals Are Used on Certain C13 Machine Engines {1161}
2015/09/03
Improved Crankshafts are Now Used on Certain Cat<SUP>&reg;</SUP> Products {1202}
Improved Crankshafts are Now Used on Certain Cat® Products {1202}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Machine Engines {1202}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Machine Engines {1202}
Engine News
A New Liner O-Ring Seal is Available for Certain C10 Through C13 Engines {1201, 7555}
2013/12/23
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Specifications
Cylinder Liner
C13 Engines for Caterpillar Built Machines
Cylinder Block
C13 Engines for Caterpillar Built Machines
Main Bearing Journal
C13 Engines for Caterpillar Built Machines
Piston Cooling Jet
C13 Engines for Caterpillar Built Machines
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
C13 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
C13 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C13 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C13 Engines for Caterpillar Built Machines
Troubleshooting
Crankcase Pressure Is High
C13, C15, and C18 Tier 4 Interim Engines
Crankcase Pressure Is Low
C13, C15, and C18 Tier 4 Interim Engines
Cylinder Is Noisy
C13, C15, and C18 Tier 4 Interim Engines
Disassembly and Assembly
Camshaft Bearings - Remove
C13
Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C13
Engines for Caterpillar Built Machines
Cylinder Liner - Remove
C13
Engines for Caterpillar Built Machines
Cylinder Liner - Install
C13
Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C13
Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C13
Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C13
Engines for Caterpillar Built Machines
Bearing Clearance - Check
C13
Engines for Caterpillar Built Machines
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
C13 Valve Stem Seals Installed Incorrectly{1100, 1101, 7555}
C13 Valve Stem Seals Installed Incorrectly{1100, 1101, 7555}
Specifications
Cylinder Head Valves
C13 Engines for Caterpillar Built Machines
Cylinder Head
C13 Engines for Caterpillar Built Machines
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Electronic Unit Injector Sleeve - Remove and Install
C13
Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
C13
Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
C13
Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Springs - Remove and Install
C13
Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
C13
Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
C13
Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C13
Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C13
Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C13
Engines for Caterpillar Built Machines
Cylinder Head - Remove and Install
C13
Engines for Caterpillar Built Machines
Service Magazine
A New Installation Process Is Used for Valve Stem Seals in Certain C13 Machine Engines {1100, 1104, 1105}
2014/03/24
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C13
Engines for Caterpillar Built Machines
Accessory Drive - Remove and Install - Bracket and Pulleys
C13
Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Engine Compartment - Clean
980K Wheel Loader
Special Instruction
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Specifications
Flywheel Housing
C13 Engines for Caterpillar Built Machines
Flywheel
C13 Engines for Caterpillar Built Machines
Flywheel
C13 Engines for Caterpillar Built Machines
Flywheel Housing
C13 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel - Remove and Install
C13
Engines for Caterpillar Built Machines
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Specifications
Gear Group (Front)
C13 Engines for Caterpillar Built Machines
Gear Group (Front)
C13 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Gear Group (Front) - Remove and Install
C13
Engines for Caterpillar Built Machines
Service Magazine
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
New Engine Front Cover Used On Certain Applications Equipped With C13 Machine Engines {1151, 1162, 1206}
2013/11/14
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
Service Letter-Americas
Specifications
Flywheel Housing
C13 Engines for Caterpillar Built Machines
Flywheel Housing
C13 Engines for Caterpillar Built Machines
Flywheel Housing Cover
C13 Engines for Caterpillar Built Machines
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE REAR CRANKSHAFT SEAL ON CERTAIN 980K WHEEL LOADERS
Testing and Adjusting
Flywheel Housing - Inspect
C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel Housing - Remove and Install
C13
Engines for Caterpillar Built Machines
Specifications
Crankshaft Seals
C13 Engines for Caterpillar Built Machines
Front Housing and Covers
C13 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Front Cover - Remove and Install
C13
Engines for Caterpillar Built Machines
Housing (Front) - Remove and Install
C13
Engines for Caterpillar Built Machines
Service Magazine
New Engine Front Cover Used On Certain Applications Equipped With C13 Machine Engines {1151, 1162, 1206}
2013/11/14
Specifications
Engine Support (Front)
C13 Engines for Caterpillar Built Machines
Engine and Transmission Support Group
980K Wheel Loader Power Train
Engine Support (Front)
C13 Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Engine Oil Level - Check
980K Wheel Loader
Engine Oil Sample - Obtain
980K Wheel Loader
Engine Oil and Filter - Change
980K Wheel Loader
Specifications
Engine Oil Level Switch - If Equipped
C13 Engines for Caterpillar Built Machines
Engine Oil Pan
C13 Engines for Caterpillar Built Machines
Engine Oil Pan
C13 Engines for Caterpillar Built Machines
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Engine Oil Pan - Remove and Install
C13
Engines for Caterpillar Built Machines
Engine Oil Pan - Remove and Install
980K Wheel Loader C13 Engine Supplement
Service Magazine
Guidelines for Repairing the Isolation Seal on the Oil Pan of the C13 Engine in Certain Machines {1302}
2013/06/04
Special Instruction
Correct Combinations of Connecting Rods Allowed in Remanufactured Cylinder Packs for Certain C13 Engines{1218, 1225, 1239}
Correct Combinations of Connecting Rods Allowed in Remanufactured Cylinder Packs for Certain C13 Engines{1218, 1225, 1239}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
System Check after an NOx Reduction System (NRS) Cooler Failure for C9.3 through C18 Tier 4 Engines {1000, 1075, 108C, 108F}
System Check after an NOx Reduction System (NRS) Cooler Failure for C9.3 through C18 Tier 4 Engines {1000, 1075, 108C, 108F}
Technical Information Bulletin
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Specifications
Connecting Rod Bearing Journal
C13 Engines for Caterpillar Built Machines
Piston and Rings
C13 Engines for Caterpillar Built Machines
Piston Cooling Jet
C13 Engines for Caterpillar Built Machines
Connecting Rod
C13 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Compression - Test
C13 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
C13 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C13 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Inspect
C13 Engines for Caterpillar Built Machines
Engine Crankcase Pressure (Blowby) - Test
C13 Engines for Caterpillar Built Machines
Piston Ring Groove - Inspect
C13 Engines for Caterpillar Built Machines
Disassembly and Assembly
Piston Cooling Jets - Remove and Install
C13
Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
C13
Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
C13
Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
C13
Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
C13
Engines for Caterpillar Built Machines
Connecting Rod Bearings - Remove
C13
Engines for Caterpillar Built Machines
Connecting Rod Bearings - Install
C13
Engines for Caterpillar Built Machines
Bearing Clearance - Check
C13
Engines for Caterpillar Built Machines
Service Magazine
Updated Reuse And Salvage Guidelines for C27 and C32 Machine Engines {1202, 1218}
2015/04/10
Improved Connecting Rod Bolts Are Now Used on Certain C11 and C13 Machine Engines {1225}
Improved Connecting Rod Bolts Are Now Used on Certain C11 and C13 Machine Engines {1225}
Specifications
Idler Pulley
C13 Engines for Caterpillar Built Machines
Idler Pulley
C13 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C13
Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Service Magazine
An Improved Oil Pump is Now Used on Certain C13 Machine Engines {1304}
An Improved Oil Pump is Now Used on Certain C13 Machine Engines {1304}
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
NEHS0733: <NOBR>159-9404</NOBR> Counterbore Tool Group For C10 through C13 {0705}
NEHS0733: 159-9404 Counterbore Tool Group For C10 through C13 {0705}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
New Rocker Arms Are Used on C27 and C32 Commercial Engines {1123}
2014/05/07
Correct Valve Rocker Arm Usage on C27 and C32 Engines {1123}
2015/09/04
Operation and Maintenance Manual
Engine Valve Lash - Check
980K Wheel Loader
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTOR ROCKER ARMS ON CERTAIN 16M 3 MOTOR GRADERS, 349E, AND 349F EXCAVATORS, 621H, 621K, 623H, 623K, 627H, AND 627K WHEEL TRACTOR-SCRAPER, 730C ARTICULATED TRUCKS, 980K, 980M, AND 982M WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTOR ROCKER ARMS ON CERTAIN 16M 3 MOTOR GRADERS, 349E, AND 349F EXCAVATORS, 621H, 621K, 623H, 623K, 627H, AND 627K WHEEL TRACTOR-SCRAPER, 730C ARTICULATED TRUCKS, 980K, 980M, AND 982M WHEEL LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Electronic Unit Injector Rocker Arm
C13 Engines for Caterpillar Built Machines
Rocker Shaft
C13 Engines for Caterpillar Built Machines
Valve Mechanism
C13 Engines for Caterpillar Built Machines
Valve Rocker Arm
C13 Engines for Caterpillar Built Machines
Valve Mechanism Cover
C13 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTOR ROCKER ARMS ON CERTAIN 16M 3 MOTOR GRADERS, 349E, AND 349F EXCAVATORS, 621H, 621K, 623H, 623K, 627H, AND 627K WHEEL TRACTOR-SCRAPER, 730C ARTICULATED TRUCKS, 980K, 980M, AND 982M WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTOR ROCKER ARMS ON CERTAIN 16M 3 MOTOR GRADERS, 349E, AND 349F EXCAVATORS, 621H, 621K, 623H, 623K, 627H, AND 627K WHEEL TRACTOR-SCRAPER, 730C ARTICULATED TRUCKS, 980K, 980M, AND 982M WHEEL LOADERS
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTOR ROCKER ARMS ON CERTAIN 16M 3 MOTOR GRADERS, 349E, AND 349F EXCAVATORS, 621H, 621K, 623H, 623K, 627H, AND 627K WHEEL TRACTOR-SCRAPER, 730C ARTICULATED TRUCKS, 980K, 980M, AND 982M WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE INJECTOR ROCKER ARMS ON CERTAIN 16M 3 MOTOR GRADERS, 349E, AND 349F EXCAVATORS, 621H, 621K, 623H, 623K, 627H, AND 627K WHEEL TRACTOR-SCRAPER, 730C ARTICULATED TRUCKS, 980K, 980M, AND 982M WHEEL LOADERS
Testing and Adjusting
Finding Top Center Position for No. 1 Piston
C13 Engines for Caterpillar Built Machines
Engine Valve Lash - Inspect/Adjust
C13 Engines for Caterpillar Built Machines
Troubleshooting
Valve Rotator or Spring Lock Is Free
C13, C15, and C18 Tier 4 Interim Engines
Valve Lash Is Excessive
C13, C15, and C18 Tier 4 Interim Engines
Variable Valve Actuator - Test
C13, C15, and C18 Tier 4 Interim Engines
Variable Valve Actuator Response - Test
C13, C15, and C18 Tier 4 Interim Engines
Disassembly and Assembly
Valve Actuator (Variable) - Remove and Install
C13
Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
C13
Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
C13
Engines for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install
C13
Engines for Caterpillar Built Machines
Valve Mechanism Cover Base - Remove and Install
C13
Engines for Caterpillar Built Machines
Rocker Arm - Disassemble
C13
Engines for Caterpillar Built Machines
Rocker Arm - Assemble
C13
Engines for Caterpillar Built Machines
Lifter Group - Remove and Install
C13
Engines for Caterpillar Built Machines
Service Magazine
A New Rocker Arm Assembly Is Used on Certain Machines Equipped with C11 and C13 Engines {1123}
2012/10/03
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
An Improved Rocker Arm Assembly Is Used on C27 and C32 Machine Engines {1102, 1123}
2014/05/30
Improved Reman Camshafts Are Now Used on Certain C27 and C32 Machines {1209, 1210}
2014/05/30
New Rocker Arms Are Used for Certain C27 and C32 Machine Engines {1102, 1123}
2014/05/30
New Fuel Injector Rocker Arms Are Used on Certain C13 Machine Engines {1123}
2014/12/11
Cat<SUP>&reg;</SUP> Reman Has Added Valve Actuators, Valve Lifters, Rocker Arms, and Camshafts for Certain Machine Engines {1121, 1130, 1209, 1210}
2014/09/05
New Guidelines for Valve Cover Base Threaded Insert on C27 and C32 Engines {1107, 1120}
2014/10/27
Correct Valve Rocker Arm Usage on C27 and C32 Machine Engines {1123}
2015/09/03
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}

Truck sale:

Caterpillar 980K
 
Caterpillar 980K
- Wheel Loaders
FOLEY, INC.
Caterpillar 980K, Wheel Loaders, Construction
114,025 
Caterpillar 980K, Wheel Loaders, Construction
- Wheel Loaders
BERGERAT MONNOYEUR S.A.S.
Caterpillar 980K, Wheel Loaders, Construction
218,068 
Caterpillar 980K, Wheel Loaders, Construction
- Wheel Loaders
MILTON CAT
Caterpillar 980K, Wheel Loaders, Construction
175,376 
Caterpillar 980K, Wheel Loaders, Construction
- Wheel Loaders
BERGERAT MONNOYEUR S.A.S.
Caterpillar 980K, Wheel Loaders, Construction
219,844 
Caterpillar 980K, Wheel Loaders, Construction
- Wheel Loaders
CAVPOWER
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.