ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP#SEBP57660840
390-0496: WIRING GP-ENGINE
390-0496 WIRING GP-ENGINE
AN ATTACHMENT
AN ATTACHMENT
Parts for your 3512C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9X-6772 | [9] | STRAP-CABLE | |
| 2. | 108-3612 | [2] | SPACER (11.13X19.05X53-MM THK) | |
| 3. | 288-3783 | [1] | SENSOR-TEMPERATURE | |
| 4. | 349-7378 | [1] | SENSOR GP-PRESSURE (ENGINE OIL FILTER INLET) | |
| 4A. | 349-7378 | [1] | SENSOR GP-PRESSURE (FUEL, SECONDARY) | |
| 4B. | 349-7378 | [1] | SENSOR GP-PRESSURE (ENG OIL BLOCK INLET, SECONDARY) | |
| 4C. | 349-7378 | [1] | SENSOR GP-PRESSURE (JACKET WATER, PRIMARY) | |
| 4D. | 349-7378 | [1] | SENSOR GP-PRESSURE (JACKET WATER, SECONDARY) | |
| 5. | 353-5439 | [5] | CONNECTOR | |
| 6. | 390-0492 Y | [1] | WIRING GP-SENSOR | |
| 7. | 390-0494 | [1] | THERMOWELL | |
| 8. | 0S-1594 | [1] | BOLT (3/8-16X1-IN) | |
| 9. | 0S-1619 | [1] | BOLT (3/8-16X3-IN) | |
| 10. | 0S-1621 | [1] | BOLT (1/2-13X1-IN) | |
| 11. | 151-5145 | [1] | ELBOW | |
| 12. | 214-7566 | [6] | SEAL-O-RING | |
| 13. | 228-7100 | [7] | SEAL-O-RING | |
| 14. | 277-1873 | [1] | CLIP (LADDER) | |
| 15. | 309-4314 | [1] | CLIP (LADDER) | |
| 16. | 351-4318 | [2] | CLIP | |
| 17. | 352-3969 | [1] | CLIP (LADDER) | |
| 18. | 4D-9517 | [1] | CLIP | |
| 19. | 5M-2894 | [3] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 20. | 5P-8245 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 21. | 8M-2770 | [3] | CLIP (LOOP) | |
| 22. | 8S-9191 | [1] | BOLT (3/8-16X4-IN) | |
| 23. | 263-6568 | [2] | VALVE-CHECK | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57660841
391-1447: WIRING GP-ENGINE
391-1447 WIRING GP-ENGINE -RH
PART OF 364-7367, 385-6661 WIRING GP-ENGINE
AN ATTACHMENT
PART OF 364-7367, 385-6661 WIRING GP-ENGINE
AN ATTACHMENT
Parts for your 3512C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 357-9033 | [4] | CLAMP | |
| 2. | 364-7381 Y | [1] | WIRING GP-ENGINE (RH) | |
| 3. | 372-4756 | [2] | BRACKET | |
| 4. | 372-4757 | [1] | BRACKET AS | |
| 5. | 377-4638 | [2] | BRACKET | |
| 6. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 7. | 6V-7697 | [4] | SCREW-MACHINE (8-32X1.25-IN) | |
| 8. | 7W-5938 | [4] | SCREW-TAPPING (10-24X0.622-IN) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57660842
391-1448: WIRING GP-ENGINE
391-1448 WIRING GP-ENGINE -RH
PART OF 364-7377, 385-6662 WIRING GP-ENGINE
AN ATTACHMENT
PART OF 364-7377, 385-6662 WIRING GP-ENGINE
AN ATTACHMENT
Parts for your 3512C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 357-9033 | [5] | CLAMP | |
| 2. | 364-7391 Y | [1] | WIRING GP-ENGINE | |
| 3. | 372-4756 | [2] | BRACKET | |
| 4. | 372-4757 | [2] | BRACKET AS | |
| 5. | 377-4638 | [2] | BRACKET | |
| 6. | 096-6166 | [4] | WASHER-HARD (4.5X9X1-MM THK) | |
| 7. | 2N-3478 | [3] | SCREW-MACHINE (10-24X0.375-IN) | |
| 8. | 6V-7697 | [4] | SCREW-MACHINE (8-32X1.25-IN) | |
| 9. | 7W-5938 | [2] | SCREW-TAPPING (10-24X0.622-IN) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57660843
391-1449: WIRING GP-ENGINE
Parts for your 3512C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 357-9032 | [2] | CLAMP | |
| 2. | 357-9033 | [2] | CLAMP | |
| 3. | 364-7368 Y | [1] | WIRING GP-ENGINE (LH) | |
| 4. | 372-4756 | [1] | BRACKET | |
| 5. | 377-4628 | [1] | BRACKET AS | |
| 6. | 377-4629 | [1] | BRACKET AS | |
| 7. | 377-4632 | [3] | BRACKET AS | |
| 8. | 377-4633 | [1] | BRACKET AS | |
| 9. | 096-6166 | [8] | WASHER-HARD (4.5X9X1-MM THK) | |
| 10. | 2N-2658 | [1] | BOLT-SOCKET HEAD (8-32X15.88-MM) | |
| 11. | 394-8452 | [4] | SCREW-PAN HEAD (10-24X1.75-IN) | |
| 12. | 6V-7697 | [8] | SCREW-MACHINE (8-32X1.25-IN) | |
| 13. | 7W-5938 | [3] | SCREW-TAPPING (10-24X0.622-IN) | |
| 14. | 8J-1256 | [1] | CLIP (LOOP) | |
| 15. | 8T-0328 | [4] | WASHER-HARD (5.5X10X1-MM THK) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57660844
391-1453: WIRING GP-ENGINE
Parts for your 3512C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 357-9032 | [3] | CLAMP | |
| 2. | 357-9033 | [3] | CLAMP | |
| 3. | 364-7368 Y | [1] | WIRING GP-ENGINE (LH) | |
| 4. | 372-4756 | [2] | BRACKET | |
| 5. | 377-4628 | [1] | BRACKET AS | |
| 6. | 377-4629 | [1] | BRACKET AS | |
| 7. | 377-4632 | [3] | BRACKET AS | |
| 8. | 377-4633 | [1] | BRACKET AS | |
| 9. | 096-6166 | [8] | WASHER-HARD (4.5X9X1-MM THK) | |
| 10. | 2N-2658 | [1] | BOLT-SOCKET HEAD (8-32X15.88-MM) | |
| 11. | 2N-3478 | [2] | SCREW-MACHINE (10-24X0.375-IN) | |
| 12. | 308-3074 | [1] | CLIP | |
| 13. | 394-8452 | [4] | SCREW-PAN HEAD (10-24X1.75-IN) | |
| 14. | 6V-7697 | [8] | SCREW-MACHINE (8-32X1.25-IN) | |
| 15. | 7W-5938 | [3] | SCREW-TAPPING (10-24X0.622-IN) | |
| 16. | 8T-0328 | [4] | WASHER-HARD (5.5X10X1-MM THK) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57660845
391-5681: WIRING GP-ENGINE
391-5681 WIRING GP-ENGINE
AN ATTACHMENT
AN ATTACHMENT
Parts for your 3512C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 143-9607 | [6] | STRAP-CABLE | |
| 2. | 216-4596 | [2] | ELBOW | |
| 3. | 256-6453 | [1] | SENSOR-TEMPERATURE (2-PIN)(COMPRESSOR INLET AIR, LH) | |
| 4. | 320-3063 | [1] | SENSOR GP-PRESSURE (COMPRESSOR INLET AIR, RH) | |
| 4A. | 320-3063 | [1] | SENSOR GP-PRESSURE (COMPRESSOR INLET AIR, LH) | |
| 5. | 357-9033 | [1] | CLAMP | |
| 6. | 359-6013 | [1] | BRACKET AS (RH) | |
| 7. | 359-6015 | [1] | BRACKET AS (LH) | |
| 8. | 398-1258 Y | [1] | HARNESS AS-SENSOR (TURBOCHARGER, RH) | |
| 9. | 398-1260 Y | [1] | HARNESS AS-SENSOR (TURBOCHARGER, LH) | |
| 10. | 096-6166 | [2] | WASHER-HARD (4.5X9X1-MM THK) | |
| 11. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 12. | 228-7100 | [4] | SEAL-O-RING | |
| 13. | 238-5080 | [1] | SEAL-O-RING | |
| 14. | 285-6393 | [6] | CLIP (LADDER) | |
| 15. | 2S-4078 | [1] | SEAL-O-RING | |
| 16. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 17. | 5P-8905 | [1] | ADAPTER-O-RING | |
| 18. | 7S-1198 | [2] | SCREW-MACHINE (8-32X1.5-IN) | |
| 19. | 7W-5938 | [1] | SCREW-TAPPING (10-24X0.622-IN) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57660846
440-6853: WIRING GP-ENGINE
Parts for your 3512C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 440-6854 Y | [1] | HARNESS AS-ENGINE (POWER DISTRIBUTION) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57660847
445-9384: WIRING GP-ENGINE
Parts for your 3512C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 445-9385 Y | [1] | HARNESS AS-ENGINE (POWER DISTRIBUTION) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57660848
445-9390: WIRING GP-ENGINE
Parts for your 3512C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 445-9391 Y | [1] | HARNESS AS-POWER (PRELUBRICATION) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57660849
445-9392: WIRING GP-ENGINE
Parts for your 3512C MARINE ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 445-9393 Y | [1] | HARNESS AS-POWER (PRELUBRICATION) | |
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Engine News
New Speed Sensor Groups Are Now Used on Certain C13, C32, C280, 3176B, 3400E, G3400, 3500, G3500, and G3600 Engines {1907, 1912, 3141, 3175}
New Speed Sensor Groups Are Now Used on Certain C13, C32, C280, 3176B, 3400E, G3400, 3500, G3500, and G3600 Engines {1907, 1912, 3141, 3175}
New Speed Sensor Groups Are Now Used on Certain C13, C32, C280, 3176B, 3400E, G3400, 3500, G3500, and G3600 Engines {1907, 1912, 3141, 3175}
Special Instruction
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Alarm and Protection Field Test Procedure for Certain Marine Engines {0374, 0599, 0706, 0708, 0709, 0769, 0781, 1000, 1408, 1439}
Alarm and Protection Field Test Procedure for Certain Marine Engines {0374, 0599, 0706, 0708, 0709, 0769, 0781, 1000, 1408, 1439}
Alarm and Protection Field Test Procedure for Certain Marine Engines {0374, 0599, 0706, 0708, 0709, 0769, 0781, 1000, 1408, 1439}
Technical Information Bulletin
Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}
Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}
Improper Installation of the 274-6717 Crankcase Pressure Sensor on 3500 Commercial Engines{1408, 1439, 1916}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Troubleshooting
Service Magazine
New Speed Sensor Groups Are Now Used on Certain Machine Engines {1907, 1912, 3141, 3175, 4803, 7493}
New Speed Sensor Groups Are Now Used on Certain Machine Engines {1907, 1912, 3141, 3175, 4803, 7493}
New Speed Sensor Groups Are Now Used on Certain Machine Engines {1907, 1912, 3141, 3175, 4803, 7493}