AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

854K Wheel Dozer H9K00001-UP (MACHINE) POWERED BY C32 Engine BASIC ENGINE Caterpillar SIS



WHEEL DOZER 854K WHEEL DOZER H9K
 854K Wheel Dozer H9K00001-UP (MACHINE) POWERED BY C32 Engine SEBP5774 854K H9K   (2011)

Parts group 854K:

  For full view, you need register
BASIC ENGINE
AIR COMPRESSOR GP
MOUNTING GP-ALTERNATOR & COMPR
347-7111 MOUNTING GP-ALTERNATOR & COMPR
347-7111 MOUNTING GP-ALTERNATOR & COMPR
S/N MZM1-UP
PART OF 333-1169, 340-2666 ENGINE AR, 335-7369, 340-2665 ENGINE AR-COMPLETE
FOR USE WITH PAD MOUNT ALTERNATORS AND REFRIGERANT COMPRESSORS
ENGINE BRAKE GP
ACTUATOR AS-VALVE
377-8599 ACTUATOR AS-VALVE
377-8599 ACTUATOR AS-VALVE
S/N MZM1-UP
24-VOLT. CAT BRAKE
PART OF 379-3929 ACTUATOR GP-VALVE
ACTUATOR GP-VALVE
379-3929 ACTUATOR GP-VALVE
379-3929 ACTUATOR GP-VALVE
S/N MZM1-UP
PART OF 418-2018 ENGINE AR-CORE
SWITCH GP-ENGINE BRAKE
282-4332 SWITCH GP-ENGINE BRAKE
282-4332 SWITCH GP-ENGINE BRAKE
S/N H9K1-UP
PART OF 341-8981, 341-8983 ENGINE AR
CAMSHAFT GP
CAMSHAFT GP
260-9307 CAMSHAFT GP
260-9307 CAMSHAFT GP
S/N MZM1-UP
PART OF 418-2018, 418-2020 ENGINE AR-CORE
Type 1
CAMSHAFT GP
260-9307 CAMSHAFT GP
260-9307 CAMSHAFT GP
S/N MZM1-UP
PART OF 418-2018, 418-2020 ENGINE AR-CORE
Type 2
CRANKSHAFT GP
CRANKSHAFT GP
224-3250 CRANKSHAFT GP
224-3250 CRANKSHAFT GP
S/N MZM1-UP
PART OF 418-2018, 418-2020 ENGINE AR-CORE
SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT -REAR
S/N MZM1-UP
PART OF 245-9775 HOUSING GP-FLYWHEEL
FOR USE WITH CCW ROTATION
SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT -FRONT
S/N MZM1-UP
PART OF 224-3250 CRANKSHAFT GP
FOR USE WITH CW ROTATION
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
347-4107 COVER GP-CYLINDER BLOCK
347-4107 COVER GP-CYLINDER BLOCK
S/N MZM1-UP
CENTRAL STRUCTURE
PART OF 335-7369 ENGINE AR-COMPLETE
COVER GP-CYLINDER BLOCK
347-8300 COVER GP-CYLINDER BLOCK
347-8300 COVER GP-CYLINDER BLOCK
S/N MZM1-UP
REAR STRUCTURE
PART OF 333-1169, 340-2666 ENGINE AR, 335-7369, 340-2665 ENGINE AR-COMPLETE
COVER GP-CYLINDER BLOCK
353-4495 COVER GP-CYLINDER BLOCK
353-4495 COVER GP-CYLINDER BLOCK
S/N MZM1-UP
PART OF 333-1169, 340-2666 ENGINE AR, 335-7369, 340-2665 ENGINE AR-COMPLETE
CYLINDER BLOCK AS
348-9904 CYLINDER BLOCK AS
348-9904 CYLINDER BLOCK AS
S/N MZM1-UP
PART OF 348-9906 CYLINDER BLOCK AS
CYLINDER BLOCK AS
348-9906 CYLINDER BLOCK AS
348-9906 CYLINDER BLOCK AS
S/N MZM1-UP
PART OF 349-2859 CYLINDER BLOCK GP
CYLINDER BLOCK GP
349-2859 CYLINDER BLOCK GP
349-2859 CYLINDER BLOCK GP
S/N MZM1-UP
PART OF 418-2018, 418-2020 ENGINE AR-CORE
PLUG GP-CYLINDER BLOCK
349-8623 PLUG GP-CYLINDER BLOCK
349-8623 PLUG GP-CYLINDER BLOCK
S/N MZM1-UP
PROVIDES PLUGS FOR THE UNUSED PORTS ON THE BLOCK
PART OF 335-7369 ENGINE AR-COMPLETE
PLUG GP-CYLINDER BLOCK
360-3022 PLUG GP-CYLINDER BLOCK
360-3022 PLUG GP-CYLINDER BLOCK
S/N MZM1-UP
PART OF 333-1169, 340-2666 ENGINE AR, 335-7369, 340-2665 ENGINE AR-COMPLETE
FOR USE WITH C32 LWL 992/854/993 TIER 4 MACHINE APPLICATIONS
CYLINDER HEAD GP
CYLINDER HEAD AS
357-7398 CYLINDER HEAD AS
357-7398 CYLINDER HEAD AS
S/N MZM1-UP
PART OF 359-0936 CYLINDER HEAD GP
CYLINDER HEAD AS
396-8374 CYLINDER HEAD AS
396-8374 CYLINDER HEAD AS
S/N MZM1-UP
PART OF 396-8375 CYLINDER HEAD GP
CYLINDER HEAD GP
339-3585 CYLINDER HEAD GP
339-3585 CYLINDER HEAD GP
S/N MZM1-UP
PART OF 418-2018, 418-2020 ENGINE AR-CORE
Type 1
CYLINDER HEAD GP
339-3585 CYLINDER HEAD GP
339-3585 CYLINDER HEAD GP
S/N MZM1-UP
PART OF 418-2018, 418-2020 ENGINE AR-CORE
Type 2
CYLINDER HEAD GP
359-0936 CYLINDER HEAD GP
359-0936 CYLINDER HEAD GP
S/N MZM1-UP
PART OF 339-3585 CYLINDER HEAD GP
CYLINDER HEAD GP
396-8375 CYLINDER HEAD GP
396-8375 CYLINDER HEAD GP
S/N MZM1-UP
PART OF 339-3585 CYLINDER HEAD GP
Type 1
CYLINDER HEAD GP
396-8375 CYLINDER HEAD GP
396-8375 CYLINDER HEAD GP
S/N MZM1-UP
PART OF 339-3585 CYLINDER HEAD GP
Type 2
443-0736 KIT-CYLINDER HEAD GASKET
443-0736 KIT-CYLINDER HEAD GASKET
S/N H9K1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD.. KIT INCLUDES THE TURBO GASKETS. KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. KIT IS FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE.
FIELD REPLACEMENT FOR 362-0102 KIT-CYLINDER HEAD GASKET
FOR USE WITH @@@@@335-7369@@@@@
PLUG GP-CYLINDER HEAD
223-6407 PLUG GP-CYLINDER HEAD
223-6407 PLUG GP-CYLINDER HEAD
S/N MZM1-UP
PART OF 333-1169, 340-2666 ENGINE AR, 335-7369, 340-2665 ENGINE AR-COMPLETE
DAMPER GP
DAMPER GP
347-7112 DAMPER GP
347-7112 DAMPER GP
S/N MZM1-UP
PART OF 333-1169, 340-2666 ENGINE AR, 335-7369, 340-2665 ENGINE AR-COMPLETE
FOR USE WITH 8-RIB POLY-VEE ACCESSORY DRIVE
DAMPER GP
352-7936 DAMPER GP
352-7936 DAMPER GP
S/N MZM1-UP
PART OF 355-2286 GEAR GP-FRONT
FLYWHEEL GP
FLYWHEEL GP
245-9777 FLYWHEEL GP
245-9777 FLYWHEEL GP
S/N MZM1-UP
PART OF 333-1169, 340-2666 ENGINE AR, 335-7369, 340-2665 ENGINE AR-COMPLETE
GEAR GP
GEAR GP-FRONT
355-2286 GEAR GP-FRONT
355-2286 GEAR GP-FRONT
S/N MZM1-UP
PART OF 418-2018, 418-2020 ENGINE AR-CORE
GEAR GP-REAR
245-9776 GEAR GP-REAR
245-9776 GEAR GP-REAR
S/N MZM1-UP
PART OF 333-1169, 340-2666 ENGINE AR, 335-7369, 340-2665 ENGINE AR-COMPLETE
HOUSING GP-FRONT
238-9862 HOUSING GP-FRONT
238-9862 HOUSING GP-FRONT
S/N MZM1-UP
PART OF 418-2018, 418-2020 ENGINE AR-CORE
HOUSING GP-FRONT
350-1639 HOUSING GP-FRONT
350-1639 HOUSING GP-FRONT
S/N MZM1-UP
PART OF 418-2018, 418-2020 ENGINE AR-CORE
HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
245-9775 HOUSING GP-FLYWHEEL
245-9775 HOUSING GP-FLYWHEEL
S/N MZM1-UP
PART OF 333-1169, 340-2666 ENGINE AR, 335-7369, 340-2665 ENGINE AR-COMPLETE
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
348-2533 COVER GP-FRONT HOUSING
348-2533 COVER GP-FRONT HOUSING
S/N MZM1-UP
FOR COVERS WITHOUT SOUND PANELS
PART OF 333-1169 ENGINE AR, 340-2665 ENGINE AR-COMPLETE
GEAR GP-FRONT
355-2286 GEAR GP-FRONT
355-2286 GEAR GP-FRONT
S/N MZM1-UP
PART OF 418-2018, 418-2020 ENGINE AR-CORE
HOUSING GP-FRONT
238-9862 HOUSING GP-FRONT
238-9862 HOUSING GP-FRONT
S/N MZM1-UP
PART OF 418-2018, 418-2020 ENGINE AR-CORE
HOUSING GP-FRONT
350-1639 HOUSING GP-FRONT
350-1639 HOUSING GP-FRONT
S/N MZM1-UP
PART OF 418-2018, 418-2020 ENGINE AR-CORE
431-7742 KIT-FRONT COVER GASKET
431-7742 KIT-FRONT COVER GASKET
S/N H9K1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE OIL PAN GASKET
FOR USE WITH @@@@@340-2665@@@@@, @@@@@340-2666@@@@@
LIFTING GP-ENGINE
LIFTING GP-ENGINE
235-2014 LIFTING GP-ENGINE
235-2014 LIFTING GP-ENGINE
S/N MZM1-UP
PART OF 333-1169, 340-2666 ENGINE AR, 335-7369, 340-2665 ENGINE AR-COMPLETE
MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR & COMPR
347-7111 MOUNTING GP-ALTERNATOR & COMPR
347-7111 MOUNTING GP-ALTERNATOR & COMPR
S/N MZM1-UP
PART OF 333-1169, 340-2666 ENGINE AR, 335-7369, 340-2665 ENGINE AR-COMPLETE
FOR USE WITH PAD MOUNT ALTERNATORS AND REFRIGERANT COMPRESSORS
MOUNTING GP-ENGINE
SUPPORT GP-ENGINE
217-5672 SUPPORT GP-ENGINE
217-5672 SUPPORT GP-ENGINE
S/N MZM1-UP
PART OF 333-1169, 340-2666 ENGINE AR, 335-7369, 340-2665 ENGINE AR-COMPLETE
SUPPORT GP-ENGINE
221-1460 SUPPORT GP-ENGINE
221-1460 SUPPORT GP-ENGINE
S/N H9K1-UP
PART OF 339-1143 INSTALLATION AR-ENGINE
PAN GP-OIL
PAN GP-OIL
348-3584 PAN GP-OIL
348-3584 PAN GP-OIL
S/N MZM1-UP
PART OF 333-1169, 340-2666 ENGINE AR, 335-7369, 340-2665 ENGINE AR-COMPLETE
Type 1
FOR USE WITH @@@@@270-7020@@@@@
PAN GP-OIL
348-3584 PAN GP-OIL
348-3584 PAN GP-OIL
S/N MZM1-UP
PART OF 333-1169, 340-2666 ENGINE AR, 335-7369, 340-2665 ENGINE AR-COMPLETE
Type 2
FOR USE WITH @@@@@270-7020@@@@@
PISTON & ROD GP
PISTON & ROD GP
352-4215 PISTON & ROD GP
352-4215 PISTON & ROD GP
S/N MZM1-UP
16:5:1 COMPRESSION RATIO
PART OF 418-2018, 418-2020 ENGINE AR-CORE
SUPPRESSION GP-SOUND
342-1519 SUPPRESSION AR-SOUND
342-1519 SUPPRESSION AR-SOUND
S/N H9K1-UP
PART OF 376-4417, 378-7681 OPTION AR-ENGINE
VALVE MECHANISM GP
ACTUATOR AS-VALVE
377-8599 ACTUATOR AS-VALVE
377-8599 ACTUATOR AS-VALVE
S/N MZM1-UP
24-VOLT. CAT BRAKE
PART OF 379-3929 ACTUATOR GP-VALVE
ACTUATOR GP-VALVE
379-3929 ACTUATOR GP-VALVE
379-3929 ACTUATOR GP-VALVE
S/N MZM1-UP
PART OF 418-2018 ENGINE AR-CORE
BASE GP-VALVE COVER & INJ HARN
226-4927 BASE GP-VALVE COVER & INJ HARN
226-4927 BASE GP-VALVE COVER & INJ HARN
S/N MZM1-UP
PART OF 395-3227 BASE GP-VALVE COVER & INJ HARN
Type 1
BASE GP-VALVE COVER & INJ HARN
226-4927 BASE GP-VALVE COVER & INJ HARN
226-4927 BASE GP-VALVE COVER & INJ HARN
S/N MZM1-UP
PART OF 395-3227 BASE GP-VALVE COVER & INJ HARN
Type 2
BASE GP-VALVE COVER & INJ HARN
249-8716 BASE GP-VALVE COVER & INJ HARN
249-8716 BASE GP-VALVE COVER & INJ HARN
S/N MZM1-UP
PART OF 387-5515 BASE GP-VALVE COVER & INJ HARN
Type 1
BASE GP-VALVE COVER & INJ HARN
249-8716 BASE GP-VALVE COVER & INJ HARN
249-8716 BASE GP-VALVE COVER & INJ HARN
S/N MZM1-UP
PART OF 387-5515 BASE GP-VALVE COVER & INJ HARN
Type 2
BASE GP-VALVE COVER & INJ HARN
387-5515 BASE GP-VALVE COVER & INJ HARN
387-5515 BASE GP-VALVE COVER & INJ HARN
S/N MZM1-UP
PART OF 418-2018 ENGINE AR-CORE
BASE GP-VALVE COVER & INJ HARN
395-3227 BASE GP-VALVE COVER & INJ HARN
395-3227 BASE GP-VALVE COVER & INJ HARN
S/N MZM1-UP
PART OF 418-2020 ENGINE AR-CORE
FOR USE WITH COMPRESSION BRAKES
COVER GP-SOUND SUPPRESSION
341-4801 COVER GP-SOUND SUPPRESSION
341-4801 COVER GP-SOUND SUPPRESSION
S/N MZM1-UP
PART OF 335-7369 ENGINE AR-COMPLETE
COVER GP-SOUND SUPPRESSION
347-4373 COVER GP-SOUND SUPPRESSION
347-4373 COVER GP-SOUND SUPPRESSION
S/N MZM1-UP
FRONT
PART OF 340-2666 ENGINE AR, 335-7369 ENGINE AR-COMPLETE
COVER GP-SOUND SUPPRESSION
356-4833 COVER GP-SOUND SUPPRESSION
356-4833 COVER GP-SOUND SUPPRESSION
S/N MZM1-UP
PART OF 340-2666 ENGINE AR, 335-7369 ENGINE AR-COMPLETE
COVER GP-SOUND SUPPRESSION
356-4985 COVER GP-SOUND SUPPRESSION
356-4985 COVER GP-SOUND SUPPRESSION
S/N MZM1-UP
OIL PAN
PART OF 340-2666 ENGINE AR, 335-7369 ENGINE AR-COMPLETE
COVER GP-VALVE MECHANISM
348-1111 COVER GP-VALVE MECHANISM
348-1111 COVER GP-VALVE MECHANISM
S/N MZM1-UP
PROVIDES A COVER GP-MECH WITH BREATHERS ORIENTED TOWARDS THE REAR HOUSING WITH 15 DEGREE INBOARD
PART OF 333-1169, 340-2666 ENGINE AR, 335-7369, 340-2665 ENGINE AR-COMPLETE
COVER GP-VALVE MECHANISM
459-0812 COVER GP-VALVE MECHANISM
459-0812 COVER GP-VALVE MECHANISM
S/N MZM102-UP
PART OF 333-1169, 340-2666 ENGINE AR
Type 1
COVER GP-VALVE MECHANISM
459-0812 COVER GP-VALVE MECHANISM
459-0812 COVER GP-VALVE MECHANISM
S/N MZM102-UP
PART OF 333-1169, 340-2666 ENGINE AR
Type 2
MECHANISM GP-FUEL PUMP & VALVE
255-8001 MECHANISM GP-FUEL PUMP & VALVE
255-8001 MECHANISM GP-FUEL PUMP & VALVE
S/N MZM1-UP
PART OF 418-2018 ENGINE AR-CORE
MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
S/N MZM1-UP
PART OF 418-2020 ENGINE AR-CORE
Type 1
MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
S/N MZM1-UP
PART OF 418-2020 ENGINE AR-CORE
Type 2
ROCKER ARM GP
301-5352 ROCKER ARM GP
301-5352 ROCKER ARM GP -UNIT INJECTOR
S/N MZM1-UP
PART OF 392-0066 ROCKER ARM GP
ROCKER ARM GP
384-1365 ROCKER ARM GP
384-1365 ROCKER ARM GP
S/N MZM1-UP
PART OF 392-0066 ROCKER ARM GP
ROCKER ARM GP
392-0066 ROCKER ARM GP
392-0066 ROCKER ARM GP
S/N MZM1-UP
PART OF 260-9631 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
437-3876 ROCKER ARM GP
437-3876 ROCKER ARM GP
S/N MZM1-UP
PART OF 255-8001, 260-9631 MECHANISM GP-FUEL PUMP & VALVE
Type 1
ROCKER ARM GP
437-3876 ROCKER ARM GP
437-3876 ROCKER ARM GP
S/N MZM1-UP
PART OF 255-8001, 260-9631 MECHANISM GP-FUEL PUMP & VALVE
Type 2
ROCKER ARM GP
437-3876 ROCKER ARM GP
437-3876 ROCKER ARM GP
S/N MZM1-UP
PART OF 255-8001, 260-9631 MECHANISM GP-FUEL PUMP & VALVE
Type 3
ROCKER ARM GP
437-3877 ROCKER ARM GP
437-3877 ROCKER ARM GP -EXHAUST
S/N MZM1-UP
PART OF 437-3876 ROCKER ARM GP
ROCKER ARM GP
437-3881 ROCKER ARM GP
437-3881 ROCKER ARM GP -UNIT INJECTOR
S/N MZM1-UP
PART OF 437-3876 ROCKER ARM GP
ROCKER ARM GP
489-8223 ROCKER ARM GP
489-8223 ROCKER ARM GP
S/N MZM1-UP
PART OF 437-3876 ROCKER ARM GP
ROCKER ARM GP
524-3708 ROCKER ARM GP
524-3708 ROCKER ARM GP
S/N MZM1-UP
PART OF 437-3876 ROCKER ARM GP
HOUSING GP-REAR
HOUSING GP-REAR
350-8861 HOUSING GP-REAR
350-8861 HOUSING GP-REAR
S/N MZM1-UP
PART OF 418-2018, 418-2020 ENGINE AR-CORE
451-8604 KIT-REAR COVER GASKET
451-8604 KIT-REAR COVER GASKET
S/N H9K1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER.. KIT DOES NOT INCLUDE THE OIL PAN GASKET.
FOR USE WITH @@@@@333-1169@@@@@

Information:

(For parts list, see above)

Specifications
Compression Brake
C27 and C32 Engines for Caterpillar Built Machines
Systems Operation
Compression Brake - If Equipped
C27 and C32 Engines for Caterpillar Built Machines
Testing and Adjusting
Compression Brake Lash - Adjust - If Equipped
C27 and C32 Engines for Caterpillar Built Machines
Troubleshooting
Retarder - Test
C27 and C32 Engines for Caterpillar Built Machines
Engine News
New Camshafts Are Used for Certain C27 and C32 Commercial Engines {1210}
2014/05/20
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Camshaft
C27 and C32 Engines for Caterpillar Built Machines
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
Testing and Adjusting
Excessive Bearing Wear - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines
Camshaft - Remove
C27 and C32 Engines for Caterpillar Built Machines
Camshaft - Install
C27 and C32 Engines for Caterpillar Built Machines
Camshaft - Install - C27
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
Improved Camshafts Are Now Used on Certain C27 and C32 Machines {1210}
2014/05/30
Improved Reman Camshafts Are Now Used on Certain C27 and C32 Machines {1209, 1210}
2014/05/30
Cat<SUP>&reg;</SUP> Reman Has Added Valve Actuators, Valve Lifters, Rocker Arms, and Camshafts for Certain Machine Engines {1121, 1130, 1209, 1210}
2014/09/05
Specifications
Main Bearing Journal
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Seals
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft
C27 and C32 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Information Release Memo
REMAN CRANKSHAFTS NOW AVAILABLE FOR HIGH DISPLACEMENT (HD) 3500 ENGINES AND OTHER MINING APPLICATIONS
REMAN CRANKSHAFTS NOW AVAILABLE FOR HIGH DISPLACEMENT (HD) 3500 ENGINES AND OTHER MINING APPLICATIONS
Testing and Adjusting
Excessive Bearing Wear - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft - Remove
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft - Install
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
Updated Reuse And Salvage Guidelines for C27 and C32 Machine Engines {1202, 1218}
2015/04/10
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS WITH A C32 ENGINE
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS WITH A C32 ENGINE
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Main Bearing Journal
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Liner
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Block
C27 and C32 Engines for Caterpillar Built Machines
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS WITH A C32 ENGINE
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS WITH A C32 ENGINE
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS WITH A C32 ENGINE
PRODUCT SUPPORT PROGRAM FOR REPLACING 516-9693 CYLINDER LINERS ON CERTAIN CATERPILLAR PRODUCTS WITH A C32 ENGINE
Testing and Adjusting
Cylinder Block - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Troubleshooting
Cylinder Is Noisy
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C27 and C32 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Liner - Remove
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Liner - Install
C27 and C32 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
A New Cylinder Liner is Now Available in All C32 Machine Engines {1201, 1216}
A New Cylinder Liner is Now Available in All C32 Machine Engines {1201, 1216}
Engine News
A New Water Seal Assembly Is Now Used on All 3408, 3412, C27 and C32 Commercial Engines {1100, 7555}
2013/05/13
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Specifications
Cylinder Head Valves
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Head
C27 and C32 Engines for Caterpillar Built Machines
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines
Electronic Unit Injector Sleeve - Install
C27 and C32 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Springs - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Electronic Unit Injector Sleeve - Remove
C27 and C32 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
C27 and C32 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Head - Remove - C32
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Head - Install - C32
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Head - Remove - C27
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Head - Install - C27
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
A New Intake Valve and Seat Combination Is Now Used with a New Cylinder Head on the Engines of Certain Machines {1100, 1101}
2012/09/06
Cat<SUP>&reg;</SUP> Reman Now Offers Upgrade to New Cylinder Heads for Certain Machine Engines {1100}
2014/10/03
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
854K Wheel Dozer
Specifications
Vibration Damper
C27 and C32 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install - Type 1
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install - Type 2
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Belt - Inspect/Replace
854K Wheel Dozer
Special Instruction
Engine Oil Contains Elevated Lead (Pb) {1000, 1348}
Engine Oil Contains Elevated Lead (Pb) {1000, 1348}
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Specifications
Housing (Rear)
C27 and C32 Engines for Caterpillar Built Machines
Flywheel
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Housing (Rear) - Remove
C27 and C32 Engines for Caterpillar Built Machines
Housing (Rear) - Install
C27 and C32 Engines for Caterpillar Built Machines
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Specifications
Gear Group (Front)
C27 and C32 Engines for Caterpillar Built Machines
Gear Group (Rear)
C27 and C32 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Rear Gear Group - Time
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Gear Group (Front) - Remove
C27 and C32 Engines for Caterpillar Built Machines
Gear Group (Front) - Install
C27 and C32 Engines for Caterpillar Built Machines
Gear Group (Rear) - Remove
C27 and C32 Engines for Caterpillar Built Machines
Gear Group (Rear) - Install
C27 and C32 Engines for Caterpillar Built Machines
Gear Group (Rear) - Remove
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
Specifications
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Testing and Adjusting
Flywheel Housing - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel Housing - Remove and Install - C32
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing - Remove and Install - C27
C27 and C32 Engines for Caterpillar Built Machines
Specifications
Crankshaft Seals
C27 and C32 Engines for Caterpillar Built Machines
Housing (Front)
C27 and C32 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Housing (Front) - Remove
C27 and C32 Engines for Caterpillar Built Machines
Housing (Front) - Install
C27 and C32 Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Belt - Inspect/Replace
854K Wheel Dozer
Engine Mounts - Inspect
854K Wheel Dozer
Disassembly and Assembly
Engine Trunnion - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Engine Oil Sample - Obtain
854K Wheel Dozer
Engine Oil Level - Check
854K Wheel Dozer
Engine Oil and Filter - Change
854K Wheel Dozer
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL PUMP ON CERTAIN 844K, 854K, AND 854K 2 WHEEL DOZERS, 990K, 992K 2, 993K, AND 993K 2 WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL PUMP ON CERTAIN 844K, 854K, AND 854K 2 WHEEL DOZERS, 990K, 992K 2, 993K, AND 993K 2 WHEEL LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Engine Oil Pan
C27 and C32 Engines for Caterpillar Built Machines
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL PUMP ON CERTAIN 844K, 854K, AND 854K 2 WHEEL DOZERS, 990K, 992K 2, 993K, AND 993K 2 WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL PUMP ON CERTAIN 844K, 854K, AND 854K 2 WHEEL DOZERS, 990K, 992K 2, 993K, AND 993K 2 WHEEL LOADERS
Service Letter-Asia
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL PUMP ON CERTAIN 844K, 854K, AND 854K 2 WHEEL DOZERS, 990K, 992K 2, 993K, AND 993K 2 WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL PUMP ON CERTAIN 844K, 854K, AND 854K 2 WHEEL DOZERS, 990K, 992K 2, 993K, AND 993K 2 WHEEL LOADERS
Disassembly and Assembly
Engine Oil Pan - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Connecting Rod
C27 and C32 Engines for Caterpillar Built Machines
Piston and Rings
C27 and C32 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Compression - Test
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Piston Ring Groove - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Engine Crankcase Pressure (Blowby) - Test
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C27 and C32 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
C27 and C32 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
C27 and C32 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
C27 and C32 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
C27 and C32 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
Updated Reuse And Salvage Guidelines for C27 and C32 Machine Engines {1202, 1218}
2015/04/10
Specifications
Switches
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
Disassembly and Assembly
Rear Power Take-Off (RPTO) - Remove
C27 and C32 Engines for Caterpillar Built Machines
Rear Power Take-Off (RPTO) - Install
C27 and C32 Engines for Caterpillar Built Machines
Rear Power Take-Off (RPTO) - Disassemble
C27 and C32 Engines for Caterpillar Built Machines
Rear Power Take-Off (RPTO) - Assemble
C27 and C32 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install - Type 1
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install - Type 2
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}
Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Operation and Maintenance Manual
Belt - Inspect/Replace
854K Wheel Dozer
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
New Rocker Arms Are Used on C27 and C32 Commercial Engines {1123}
2014/05/07
Correct Valve Rocker Arm Usage on C27 and C32 Engines {1123}
2015/09/04
Operation and Maintenance Manual
Engine Valve Rotators - Inspect
854K Wheel Dozer
Engine Valve Lash - Check
854K Wheel Dozer
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Valve Mechanism
C27 and C32 Engines for Caterpillar Built Machines
Electronic Unit Injector Rocker Arm
C27 and C32 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}
Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
PRODUCT SUPPORT PROGRAM FOR REPLACING THE EXHAUST ROCKER ARM ON CERTAIN 844, 990,854,992,993 AND 773,775,777.
Testing and Adjusting
Finding Top Center Position for No. 1 Piston
C27 and C32 Engines for Caterpillar Built Machines
Engine Valve Lash - Inspect/Adjust
C27 and C32 Engines for Caterpillar Built Machines
Troubleshooting
Valve Rotator or Spring Lock Is Free
C27 and C32 Engines for Caterpillar Built Machines
Valve Lash Is Excessive
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Rocker Arm - Disassemble
C27 and C32 Engines for Caterpillar Built Machines
Rocker Arm - Assemble
C27 and C32 Engines for Caterpillar Built Machines
Valve Mechanism Cover Base - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
C27 and C32 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
C27 and C32 Engines for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install - C27
C27 and C32 Engines for Caterpillar Built Machines
Valve Actuator (Variable) - Remove
C27 and C32 Engines for Caterpillar Built Machines
Valve Actuator (Variable) - Install
C27 and C32 Engines for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install - C32
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
An Improved Rocker Arm Assembly Is Used on C27 and C32 Machine Engines {1102, 1123}
2014/05/30
Improved Reman Camshafts Are Now Used on Certain C27 and C32 Machines {1209, 1210}
2014/05/30
A New Valve Cover Base and Wiring Harnesses Are Now Used on Certain C27 and C32 Machine Engines {1120, 1408}
2013/12/19
New Rocker Arms Are Used for Certain C27 and C32 Machine Engines {1102, 1123}
2014/04/03
Cat<SUP>&reg;</SUP> Reman Has Added Valve Actuators, Valve Lifters, Rocker Arms, and Camshafts for Certain Machine Engines {1121, 1130, 1209, 1210}
2014/09/05
New Guidelines for Valve Cover Base Threaded Insert on C27 and C32 Engines {1107, 1120}
2014/10/27
Updated Torque Requirements for Reman Rocker Arm Adjusting Screw Lock Nuts on Certain C15, C18, C27, and C32 Machine Engines {1123}
2015/03/31
Correct Valve Rocker Arm Usage on C27 and C32 Machine Engines {1123}
2015/09/03
New Rocker Arm Assemblies Are Now Available for Certain C27 and C32 Machine Engines {1123}
New Rocker Arm Assemblies Are Now Available for Certain C27 and C32 Machine Engines {1123}
Specifications
Housing (Rear)
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Housing (Rear) - Remove
C27 and C32 Engines for Caterpillar Built Machines
Housing (Rear) - Install
C27 and C32 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}
Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}

Truck sale:

2012 CAT 854K
USD $992,088 
2012 CAT 854K

Hastings Deering (Australia) Ltd
2008 CAT 854K
USD $583,347 
2008 CAT 854K

Hastings Deering (Australia) Ltd
2010 CAT 854K
USD $472,234 
2010 CAT 854K

Hastings Deering (Australia) Ltd
2011 CAT 854K
USD $650,809 
2011 CAT 854K

Hastings Deering (Australia) Ltd
2011 CAT 854K
USD $583,347 
2011 CAT 854K

Hastings Deering (Australia) Ltd
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.