966K Series XE Wheel Loader NGX00001-UP (MACHINE) POWERED BY C9.3 Engine BASIC ENGINE Caterpillar SIS

WHEEL LOADER 966K XE WHEEL LOADER NGX
966K Series XE Wheel Loader NGX00001-UP (MACHINE) POWERED BY C9.3 Engine SEBP5778 966K XE NGX (2012)

Parts group 966K XE:

For full view, you need register

BASIC ENGINE

AIR COMPRESSOR GP

344-0365 MOUNTING GP-ALTERNATOR & COMPR

344-0365 MOUNTING GP-ALTERNATOR & COMPR
S/N MYE527-UP
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE
FOR USE WITH PAD MOUNTED ALTERNATOR AND COMPRESSOR
CANNOT BE USED WITH FAN DRIVES

CAMSHAFT GP

294-3593 CAMSHAFT GP

294-3593 CAMSHAFT GP
S/N MYE527-UP
PART OF 347-0103 ENGINE AR-CORE

CRANKSHAFT GP

294-2987 CRANKSHAFT GP

294-2987 CRANKSHAFT GP
S/N MYE527-UP
PART OF 347-0103 ENGINE AR-CORE

295-2351 SEAL GP-CRANKSHAFT

295-2351 SEAL GP-CRANKSHAFT
S/N MYE11892-UP
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE

296-1486 SEAL GP-CRANKSHAFT

296-1486 SEAL GP-CRANKSHAFT
S/N MYE527-11891
PART OF 369-6681 ENGINE AR-COMPLETE

CYLINDER BLOCK GP

348-9213 COVER & MTG GP-CYLINDER BLOCK

348-9213 COVER & MTG GP-CYLINDER BLOCK
S/N MYE527-UP
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE
FOR USE WITH ENGINES WITH VALVE COVER MOUNTED BREATHER
CANNOT BE USED WITH ENGINES WITH SIDE MOUNTED BREATHER

523-9619 CYLINDER BLOCK AS

523-9619 CYLINDER BLOCK AS
S/N MYE527-UP
PART OF 277-7261 CYLINDER BLOCK GP

524-2485 CYLINDER BLOCK AS

524-2485 CYLINDER BLOCK AS
S/N MYE527-UP
PART OF 523-9619 CYLINDER BLOCK AS

277-7261 CYLINDER BLOCK GP

277-7261 CYLINDER BLOCK GP
S/N MYE527-UP
PART OF 347-0103 ENGINE AR-CORE

275-4260 PLUG GP-CYLINDER BLOCK

275-4260 PLUG GP-CYLINDER BLOCK
S/N MYE527-UP
PROVIDES AN O-RING PORT PLUG FOR THE REAR OF THE BLOCK
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE
FOR USE WITH ENGINES NOT USING A JACKET WATER HEATER

275-8699 PLUG GP-CYLINDER BLOCK

275-8699 PLUG GP-CYLINDER BLOCK
S/N MYE527-UP
PROVIDES AN O-RING PORT PLUG FOR THE RH SIDE OF BLOCK
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE
FOR USE WITH ENGINES NOT USING A BYPASS AUXILIARY COOLER

292-9786 PLUG GP-ENGINE

292-9786 PLUG GP-ENGINE -COMPRESSION BRAKE
S/N MYE527-UP
PROVIDES A PLUG GP FOR COMPRESSION BRAKE OIL SUPPLY WHEN COMPRESSION BRAKE IS NOT USED
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE

CYLINDER HEAD GP

328-7475 CYLINDER HEAD AS

328-7475 CYLINDER HEAD AS
S/N MYE527-UP
PART OF 346-6388 CYLINDER HEAD GP

346-0485 CYLINDER HEAD GP

346-0485 CYLINDER HEAD GP
S/N MYE527-UP
PART OF 347-0103 ENGINE AR-CORE

346-6388 CYLINDER HEAD GP

346-6388 CYLINDER HEAD GP
S/N MYE527-UP
PART OF 346-0485 CYLINDER HEAD GP

290-6884 FASTENER GP-CYLINDER HEAD

290-6884 FASTENER GP-CYLINDER HEAD
S/N MYE527-UP
PART OF 346-0485 CYLINDER HEAD GP

455-1699 KIT-CYLINDER HEAD GASKET

455-1699 KIT-CYLINDER HEAD GASKET
S/N NGX1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD.. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDES THE FUEL INJECTOR SEALS.. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED.. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE.

346-4997 PLUG GP-CYLINDER HEAD

346-4997 PLUG GP-CYLINDER HEAD
S/N MYE527-UP
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE
CANNOT BE USED WITH AIR COMPRESSOR GROUPS

292-9786 PLUG GP-ENGINE

292-9786 PLUG GP-ENGINE -COMPRESSION BRAKE
S/N MYE527-UP
PROVIDES A PLUG GP FOR COMPRESSION BRAKE OIL SUPPLY WHEN COMPRESSION BRAKE IS NOT USED
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE

DAMPER GP

211-8041 DAMPER GP

211-8041 DAMPER GP
S/N MYE527-UP
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE

218-0859 FASTENER GP-DAMPER & PULLEY

218-0859 FASTENER GP-DAMPER & PULLEY
S/N MYE527-UP
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE

FLYWHEEL GP

355-9366 FLYWHEEL GP

355-9366 FLYWHEEL GP
S/N MYE527-UP
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE

GEAR GP

294-2931 GEAR GP-FRONT

294-2931 GEAR GP-FRONT
S/N MYE527-UP
PART OF 347-0103 ENGINE AR-CORE

299-8022 HOUSING GP-FRONT

299-8022 HOUSING GP-FRONT
S/N MYE527-UP
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE

GUARD GP-BELT

324-0555 GUARD GP-BELT

324-0555 GUARD GP-BELT
S/N NGX1-UP
PART OF 353-5026 INSTALLATION AR-ENGINE

HOUSING GP-FLYWHEEL

352-1503 HOUSING GP-FLYWHEEL

352-1503 HOUSING GP-FLYWHEEL
S/N MYE527-UP
PROVIDES AXLE CLEARANCE FOR MACHINE
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE

HOUSING GP-FRONT

269-5311 COVER GP-FRONT HOUSING

269-5311 COVER GP-FRONT HOUSING
S/N MYE527-UP
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE

269-5325 COVER GP-FRONT HOUSING

269-5325 COVER GP-FRONT HOUSING
S/N MYE527-UP
PROVIDES COVER FOR ENGINES WITHOUT FACTORY INSTALLED AIR COMPRESSOR
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE

338-2640 COVER GP-FRONT HOUSING

338-2640 COVER GP-FRONT HOUSING
S/N MYE527-UP
PROVIDES A LAMINATED FRONT COVER FOR USE WITH ENGINES FOR SOUND REDUCTION PURPOSES
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE

294-2931 GEAR GP-FRONT

294-2931 GEAR GP-FRONT
S/N MYE527-UP
PART OF 347-0103 ENGINE AR-CORE

299-8022 HOUSING GP-FRONT

299-8022 HOUSING GP-FRONT
S/N MYE527-UP
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE

450-2539 KIT-FRONT COVER GASKET

450-2539 KIT-FRONT COVER GASKET
S/N NGX1-UP
KIT CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER.. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET.

455-1697 KIT-FRONT COVER GASKET

455-1697 KIT-FRONT COVER GASKET
S/N NGX1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER.. KIT DOES NOT INCLUDE THE OIL PAN GASKET.
FOR USE WITH @@@@@431-1457@@@@@

LIFTING GP-ENGINE

350-3639 LIFTING GP-ENGINE

350-3639 LIFTING GP-ENGINE
S/N MYE527-UP
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE

MOUNTING GP-ALTERNATOR

344-0365 MOUNTING GP-ALTERNATOR & COMPR

344-0365 MOUNTING GP-ALTERNATOR & COMPR
S/N MYE527-UP
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE
FOR USE WITH PAD MOUNTED ALTERNATOR AND COMPRESSOR
CANNOT BE USED WITH FAN DRIVES

MOUNTING GP-ENGINE

353-5024 MOUNTING GP-ENGINE & XMSN

353-5024 MOUNTING GP-ENGINE & XMSN
S/N NGX1-UP
PART OF 353-5026 INSTALLATION AR-ENGINE

344-4937 SUPPORT GP-ENGINE

344-4937 SUPPORT GP-ENGINE -FRONT
S/N MYE527-UP
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE

360-0744 SUPPORT GP-ENGINE

360-0744 SUPPORT GP-ENGINE
S/N NGX1-UP
PART OF 315-7905 SHIELD GP-ENGINE COMPARTMENT

MOUNTING GP-STARTING MOTOR

367-2759 MOUNTING GP-STARTING MOTOR

367-2759 MOUNTING GP-STARTING MOTOR
S/N MYE527-UP
24-VOLT, RH. PROVIDES STARTER WITHOUT GROUNDING HARDWARE
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE
FOR USE WITH RH STARTER CONFIGURATIONS
CANNOT BE USED WITH LH STARTER CONFIGURATIONS

PAN GP-OIL

352-9949 PAN GP-OIL

352-9949 PAN GP-OIL
S/N MYE527-UP
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE
FOR USE WITH @@@@@352-4168@@@@@

PISTON & ROD GP

342-6646 PISTON & ROD GP

342-6646 PISTON & ROD GP
S/N MYE527-UP
17.0:1 COMPRESSION RATIO
PART OF 347-0103 ENGINE AR-CORE

PULLEY GP

218-0859 FASTENER GP-DAMPER & PULLEY

218-0859 FASTENER GP-DAMPER & PULLEY
S/N MYE527-UP
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE

342-7219 PULLEY GP-CRANKSHAFT

342-7219 PULLEY GP-CRANKSHAFT
S/N MYE527-UP
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE
CANNOT BE USED WITH ENGINE MOUNTED CEM

SERPENTINE/V-BELTS

352-9294 BELT GP-SERPENTINE

352-9294 BELT GP-SERPENTINE
S/N MYE527-UP
PROVIDES 8 RIB POLY-RIB BELT FOR LEFT HAND SIDE ALTERNATOR AND REFRIGERANT COMPRESSOR
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE
FOR USE WITH ALTERNATOR MOUNTING GP, ALTERNATOR GP, AND A/C COMPRESSOR GP
CANNOT BE USED WITH FAN DRIVE

VALVE MECHANISM GP

349-6124 COVER GP-VALVE MECHANISM

349-6124 COVER GP-VALVE MECHANISM
S/N MYE527-UP
PROVIDES A TOP MOUNTED BREATHER, TOP MOUNTED OIL FILL PORT AND BRACKET TO SUPPORT COOLANT TEMP SENSOR WIRING HARNESS
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE
FOR USE WITH RUBBER TIRE MACHINES UP TO 30 DEGREE TILT REQUIREMENTS
CANNOT BE USED WITH TRACK TYPE MACHINES WITH 35 DEGREE AND 45 DEGREE TILT REQUIREMENTS

263-0033 ROCKER ARM GP

263-0033 ROCKER ARM GP -INTAKE
S/N MYE527-UP
PART OF 347-8760 VALVE MECHANISM GP

347-8760 VALVE MECHANISM GP

347-8760 VALVE MECHANISM GP
S/N MYE527-UP
PART OF 348-9896 VALVE MECHANISM GP

348-9896 VALVE MECHANISM GP

348-9896 VALVE MECHANISM GP
S/N MYE527-UP
PART OF 347-0103 ENGINE AR-CORE

HOUSING GP-REAR

450-2544 KIT-REAR COVER GASKET

450-2544 KIT-REAR COVER GASKET
S/N NGX1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET

458-9490 KIT-REAR COVER GASKET

458-9490 KIT-REAR COVER GASKET
S/N NGX1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@431-1457@@@@@

COVER GP-ENGINE

325-8452 COVER GP-ENGINE

325-8452 COVER GP-ENGINE
S/N MYE527-UP
PROVIDES A THERMOSTAT HOUSING SIDE COVER WITHOUT A PORT FOR COOLANT SAMPLING
PART OF 369-6681, 431-1457 ENGINE AR-COMPLETE

Information:

(For parts list, see above)

BASIC ENGINE

AIR COMPRESSOR GP

Disassembly and Assembly

Air Compressor - Remove and Install
C9.3
Engines for Caterpillar Built Machines

BELT TIGHTENER GP

Belt Tensioner - Remove and Install
C9.3
Engines for Caterpillar Built Machines

ENGINE BRAKE GP

Compression Brake - Remove
C9.3
Engines for Caterpillar Built Machines

Compression Brake - Disassemble - Valve Assembly
C9.3
Engines for Caterpillar Built Machines

Compression Brake - Assemble - Valve Assembly
C9.3
Engines for Caterpillar Built Machines

Compression Brake - Install
C9.3
Engines for Caterpillar Built Machines

CAMSHAFT GP

Reuse And Salvage Guidelines

Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}

Disassembly and Assembly

Camshaft Gear - Remove and Install
C9.3
Engines for Caterpillar Built Machines

Camshaft Bearings - Remove and Install
C9.3
Engines for Caterpillar Built Machines

Camshaft - Remove
C9.3
Engines for Caterpillar Built Machines

Camshaft - Install
C9.3
Engines for Caterpillar Built Machines

CRANKSHAFT GP

Engine News

A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Engines {1202}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Engines {1202}

Reuse And Salvage Guidelines

Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}

Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}

Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}

Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}

Disassembly and Assembly

Bearing Clearance - Check
C9.3
Engines for Caterpillar Built Machines

Crankshaft - Remove
C9.3
Engines for Caterpillar Built Machines

Crankshaft - Install
C9.3
Engines for Caterpillar Built Machines

Crankshaft Front Seal - Remove
C9.3
Engines for Caterpillar Built Machines

Crankshaft Front Seal - Install
C9.3
Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Remove
C9.3
Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Install
C9.3
Engines for Caterpillar Built Machines

Crankshaft Rear Seal - Remove
C9.3
Engines for Caterpillar Built Machines

Crankshaft Rear Seal - Install
C9.3
Engines for Caterpillar Built Machines

Service Magazine

A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Machine Engines {1202}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Machine Engines {1202}

CYLINDER BLOCK GP

Special Instruction

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}

Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}

Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}

Disassembly and Assembly

Bearing Clearance - Check
C9.3
Engines for Caterpillar Built Machines

Piston Cooling Jets - Remove and Install
C9.3
Engines for Caterpillar Built Machines

Cylinder Liner - Remove
C9.3
Engines for Caterpillar Built Machines

Camshaft Bearings - Remove and Install
C9.3
Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Remove
C9.3
Engines for Caterpillar Built Machines

Crankshaft Main Bearings - Install
C9.3
Engines for Caterpillar Built Machines

Cylinder Liner - Install
C9.3
Engines for Caterpillar Built Machines

Cylinder Block Cover - Remove and Install
C9.3
Engines for Caterpillar Built Machines

CYLINDER HEAD GP

Special Instruction

Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}

Reuse And Salvage Guidelines

Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}

Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}

Disassembly and Assembly

Camshaft Bearings - Remove and Install
C9.3
Engines for Caterpillar Built Machines

Inlet and Exhaust Valves - Remove and Install
C9.3
Engines for Caterpillar Built Machines

Rocker Arm and Shaft - Install
C9.3
Engines for Caterpillar Built Machines

Cylinder Head - Remove
C9.3
Engines for Caterpillar Built Machines

Cylinder Head - Install
C9.3
Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Seat Inserts - Remove and Install
C9.3
Engines for Caterpillar Built Machines

Rocker Arm and Shaft - Remove
C9.3
Engines for Caterpillar Built Machines

Unit Injector Sleeve - Remove
C9.3
Engines for Caterpillar Built Machines

Unit Injector Sleeve - Install
C9.3
Engines for Caterpillar Built Machines

Inlet and Exhaust Valve Guides - Remove and Install
C9.3
Engines for Caterpillar Built Machines

DAMPER GP

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}

Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}

Disassembly and Assembly

Vibration Damper and Pulley - Remove and Install
C9.3
Engines for Caterpillar Built Machines

DRIVE GP-FAN

Fan Drive Mounting Group - Remove and Install
C9.3
Engines for Caterpillar Built Machines

ENGINE GP

Special Instruction

Oil and Your Engine {1000}
Oil and Your Engine {1000}

Service Magazine

Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}

FASTENER GP-ENGINE

Reuse And Salvage Guidelines

Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}

FLYWHEEL GP

Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}

Disassembly and Assembly

Flywheel - Remove
C9.3
Engines for Caterpillar Built Machines

Flywheel - Install
C9.3
Engines for Caterpillar Built Machines

GEAR GP

Reuse And Salvage Guidelines

Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}

HOUSING GP-FLYWHEEL

Disassembly and Assembly

Flywheel Housing - Remove and Install
C9.3
Engines for Caterpillar Built Machines

HOUSING GP-FRONT

Reuse And Salvage Guidelines

Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}

Disassembly and Assembly

Housing (Front) - Remove
C9.3
Engines for Caterpillar Built Machines

Housing (Front) - Install
C9.3
Engines for Caterpillar Built Machines

Front Cover - Remove and Install
C9.3
Engines for Caterpillar Built Machines

PAN GP-OIL

Engine Oil Pan - Remove and Install
C9.3
Engines for Caterpillar Built Machines

PISTON & ROD GP

Special Instruction

Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}

Technical Information Bulletin

Reuse And Salvage Guidelines

Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}

Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}

Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}

Disassembly and Assembly

Bearing Clearance - Check
C9.3
Engines for Caterpillar Built Machines

Piston Cooling Jets - Remove and Install
C9.3
Engines for Caterpillar Built Machines

Connecting Rod Bearings - Remove
C9.3
Engines for Caterpillar Built Machines

Connecting Rod Bearings - Install
C9.3
Engines for Caterpillar Built Machines

Pistons and Connecting Rods - Remove
C9.3
Engines for Caterpillar Built Machines

Pistons and Connecting Rods - Disassemble
C9.3
Engines for Caterpillar Built Machines

Pistons and Connecting Rods - Assemble
C9.3
Engines for Caterpillar Built Machines

Pistons and Connecting Rods - Install
C9.3
Engines for Caterpillar Built Machines

POWER TAKE-OFF GP

Rear Power Take-Off (RPTO) - Remove
C9.3
Engines for Caterpillar Built Machines

Rear Power Take-Off (RPTO) - Install
C9.3
Engines for Caterpillar Built Machines

PULLEY GP

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}

Disassembly and Assembly

Vibration Damper and Pulley - Remove and Install
C9.3
Engines for Caterpillar Built Machines

TOOLS

Special Instruction

Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Technical Information Bulletin

368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}

Reuse And Salvage Guidelines

Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}

Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}

VALVE MECHANISM GP

Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}

Disassembly and Assembly

Lifter Group - Remove and Install
C9.3
Engines for Caterpillar Built Machines

Rocker Arm and Shaft - Install
C9.3
Engines for Caterpillar Built Machines

Rocker Arm - Disassemble
C9.3
Engines for Caterpillar Built Machines

Rocker Arm - Assemble
C9.3
Engines for Caterpillar Built Machines

Valve Mechanism Cover - Remove and Install
C9.3
Engines for Caterpillar Built Machines

Rocker Arm and Shaft - Remove
C9.3
Engines for Caterpillar Built Machines

Compression Brake - Remove
C9.3
Engines for Caterpillar Built Machines

Compression Brake - Disassemble - Valve Assembly
C9.3
Engines for Caterpillar Built Machines

Compression Brake - Assemble - Valve Assembly
C9.3
Engines for Caterpillar Built Machines

Compression Brake - Install
C9.3
Engines for Caterpillar Built Machines

COVER GP-ENGINE

Reuse And Salvage Guidelines

Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}