AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

390-0295 CONTROL & MTG GP-ELHYD S/N FER153-870 PART OF 357-1160 CONVERSION AR-MACHINE 950K WHEEL LOADER


OPERATOR STATION
CONTROL GP-ELECTROHYDRAULIC
AIR CONDITIONER GP
CONTROL GP-HANDLE
CONTROL GP-STEERING

WHEEL LOADER 950K WHEEL LOADER FER
 950K Wheel Loader FER00001-UP (MACHINE) POWERED BY C7.1 Engine SEBP5779 950K FER   (2012)

OPERATOR STATION

CONTROL GP-ELECTROHYDRAULIC
CONTROL & MTG GP-ELHYD
330-3854 CONTROL & MTG GP-ELHYD
CONTROL & MTG GP-ELHYD
330-3857 CONTROL & MTG GP-ELHYD
CONTROL & MTG GP-ELHYD
344-3968 CONTROL & MTG GP-ELHYD
CONTROL & MTG GP-ELHYD
344-3969 CONTROL & MTG GP-ELHYD
CONTROL & MTG GP-ELHYD
344-3969 CONTROL & MTG GP-ELHYD
CONTROL & MTG GP-ELHYD
344-3970 CONTROL & MTG GP-ELHYD
CONTROL & MTG GP-ELHYD
390-0295 CONTROL & MTG GP-ELHYD
CONTROL & MTG GP-ELHYD
390-0295 CONTROL & MTG GP-ELHYD
 

#SEBP57790780
 

390-0295: CONTROL & MTG GP-ELHYD

390-0295 CONTROL & MTG GP-ELHYD
S/N FER153-870
PART OF 357-1160 CONVERSION AR-MACHINE
i05078591 SEBP5779
3900295 CONTROL & MTG GP-ELHYD Parts scheme
  For full view, you need register

Parts for your 950K WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-8722 [4] NUT (RETAINER)  
2. 189-2077 [1] FILM-IDENTIFICATION (LIFT, FLOAT, LOWER)  
3. 189-2078 [1] FILM-IDENTIFICATION (DUMP, TILT BACK)  
4. 189-2079 [1] FILM-INSTRUCTION (MAINTENANCE)  
5. 201-5563 [1] FILM-IDENTIFICATION (AUXILIARY HYDRAULIC)  
6. 253-8798 [1] KNOB  
7. 275-6530 [1] FILM-IDENTIFICATION (HORN, TRANSMISSION DIRECTION)  
8. 280-9440 [1] CUSHION AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
9. 282-6686 [1] COVER  
10. 283-8171 [1] BRACKET  
11. 283-8172 [1] BRACKET AS  
12. 285-5521 [1] BRACKET AS  
13. 290-1262 [1] CUSHION AS  
14. 307-4671 Y [1] CONTROL GP-HANDLE (PILOT CONTROL)  
15. 324-6610 [1] SWITCH AS-ROCKER (FORWARD, NEUTRAL, REVERSE)  
  9X-3401 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  281-3121 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  281-3122 [1] RECEPTACLE AS-CONNECTOR  
16. 361-5015 Y [1] SUPPORT GP-HYDRAULIC CONTROL  
17. 361-6292 Y [1] WIRING GP-ELECTROHYDRAULIC  
18. 390-0283 [1] COVER AS  
19. 389-0890 [1] CONTROL AS-PROPORTIONAL  
  8T-8737 [1] PLUG-SEAL  
  9X-3401 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
  151-9275 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
20. 3S-2093 [2] STRAP-CABLE  
21. 7X-0578 [1] WASHER-HARD (10.2X32X2.5-MM THK)  
22. 8T-4197 M [1] BOLT (M8X1.25X40-MM)  
23. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
24. 8T-4908 M [3] BOLT (M8X1.25X25-MM)  
25. 9X-2043 M [9] SCREW-TRUSS HEAD (M6X1X14-MM)  
26. 9X-2044 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
27. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
28. 6V-3987 D [1] SEAL (0.1-M)  
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP57790781
 

390-0295: CONTROL & MTG GP-ELHYD

390-0295 CONTROL & MTG GP-ELHYD
S/N FER871-UP
PART OF 357-1160 CONVERSION AR-MACHINE
i06019223 SEBP5779
3900295 CONTROL & MTG GP-ELHYD Parts scheme
  For full view, you need register

Parts for your 950K WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 172-8591 M [4] NUT-CLIP (M6X1-THD)  
2. 189-2077 [1] FILM-IDENTIFICATION (LIFT, FLOAT, LOWER)  
3. 189-2078 [1] FILM-IDENTIFICATION (DUMP, TILT BACK)  
4. 189-2079 [1] FILM-INSTRUCTION (MAINTENANCE)  
5. 201-5563 [1] FILM-IDENTIFICATION (AUXILIARY HYDRAULIC)  
6. 253-8798 [1] KNOB  
7. 275-6530 [1] FILM-IDENTIFICATION (HORN, TRANSMISSION DIRECTION)  
8. 280-9440 [1] CUSHION AS  
9. 282-6686 [1] COVER  
10. 283-8171 [1] BRACKET  
11. 283-8172 [1] BRACKET AS  
12. 285-5521 [1] BRACKET AS  
13. 290-1262 [1] CUSHION AS  
14. 361-6015 CY [1] CONTROL GP-HANDLE (PILOT CONTROL)  
15. 324-6610 [1] SWITCH AS-ROCKER (FORWARD, NEUTRAL, REVERSE)  
  9X-3401 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  281-3121 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  281-3122 [1] RECEPTACLE AS-CONNECTOR  
16. 361-5015 Y [1] SUPPORT GP-HYDRAULIC CONTROL  
17. 361-6292 Y [1] WIRING GP-ELECTROHYDRAULIC  
18. 390-0283 [1] COVER AS  
19. 389-0890 [1] CONTROL AS-PROPORTIONAL  
  8T-8737 [1] PLUG-SEAL  
  9X-3401 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
  151-9275 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
20. 3S-2093 [2] STRAP-CABLE  
21. 7X-0578 [1] WASHER-HARD (10.2X32X2.5-MM THK)  
22. 8T-4197 M [1] BOLT (M8X1.25X40-MM)  
23. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
24. 8T-4908 M [3] BOLT (M8X1.25X25-MM)  
25. 9X-2043 M [9] SCREW-TRUSS HEAD (M6X1X14-MM)  
26. 9X-2044 M [4] SCREW-TRUSS HEAD (M6X1X16-MM)  
27. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
28. 6V-3987 D [1] SEAL (0.1-M)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP57790782
 

288-8557: CONTROL AS-A/C & HEATER

288-8557 CONTROL AS-A/C & HEATER -BLOWER FAN SPEED
S/N FER1-374
PART OF 289-9192 AIR CONDITIONER & MOUNTING GP
i04631469 SEBP5779
2888557 CONTROL AS-A/C & HEATER Parts scheme
  For full view, you need register

Parts for your 950K WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
2. 177-9653 [1] KIT-RECEPTACLE (4-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
3. 7T-0093 [4] PIN-CONNECTOR (12-GA TO 14-GA)  
4. 8T-8737 [1] PLUG-SEAL  
 

#SEBP57790783
 

307-4671: CONTROL GP-HANDLE

307-4671 CONTROL GP-HANDLE -BUCKET
S/N FER1-382
PART OF 344-3969, 344-3970, 390-0295 CONTROL & MTG GP-ELHYD, 361-6292 WIRING GP-ELECTROHYDRAULIC
FIELD REPLACEMENT ORDER @@@@@361-6015@@@@@
i02828658 SEBP5779
3074671 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 950K WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-9274 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 278-8974 [1] KNOB  
3. 278-8965 [1] BOOT  
4. 278-8967 [1] RETAINER-BOOT  
5. 278-8970 M [4] SCREW (M3X0.5X6-MM)  
  M   METRIC PART
 

#SEBP57790784
 

328-5932: CONTROL GP-HANDLE

328-5932 CONTROL GP-HANDLE -2-VALVE
S/N FER1-UP
PART OF 458-8673 CONTROL GP-HANDLE
i06649013 SEBP5779
3285932 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 950K WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 260-6728 [1] RECEPTACLE AS-CONNECTOR (12-PIN)  
2. 9X-3401 [8] PIN-CONNECTOR (16-GA TO 18-GA)  
3. 8T-8737 [4] PLUG-SEAL  
 

#SEBP57790785
 

361-6015: CONTROL GP-HANDLE

361-6015 CONTROL GP-HANDLE
S/N FER871-UP
SINGLE AXIS LEVER
PART OF 344-3969, 390-0295 CONTROL & MTG GP-ELHYD, 361-6292 WIRING GP-ELECTROHYDRAULIC
FIELD REPLACEMENT FOR @@@@@307-4671@@@@@
i07499170 SEBP5779
3616015 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 950K WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 151-9274 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 563-5532 Y [1] KIT-HANDLE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP57790786
 

458-8673: CONTROL GP-HANDLE

458-8673 CONTROL GP-HANDLE -2-VALVE
S/N FER1-UP
PART OF 330-3857 CONTROL & MTG GP-ELHYD
i06649008 SEBP5779
4588673 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 950K WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 328-5932 Y [1] CONTROL GP-HANDLE (2-VALVE)  
2. 455-1861 [1] BASE AS-JOYSTICK  
  9X-3401 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  280-0440 M [4] STUD-MOUNTING (M6X1-THD)  
  281-3136 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
3. 285-0150 [1] BOOT  
4. 281-3136 [1] RECEPTACLE AS-CONNECTOR (6-PIN)  
5. 260-6728 [1] RECEPTACLE AS-CONNECTOR (12-PIN)  
6. 9X-3401 [14] PIN-CONNECTOR (16-GA TO 18-GA)  
7. 8T-8737 [4] PLUG-SEAL  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP57790787
 

350-1108: CONTROL GP-STEERING

350-1108 CONTROL GP-STEERING
S/N FER1-1108
PART OF 348-2604 CAB AR
i04394306 SEBP5779
3501108 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 950K WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8R-2916 [1] COVER AS (CAT STEERING WHEEL)  
2. 8R-2918 [1] KNOB AS  
3. 363-5911 [1] STEERING WHEEL AS  
  363-6423 [1] PLUG  
4. 148-8424 [1] TEE AS  
  6V-8397 [1] SEAL-O-RING  
  8T-8902 [1] ADAPTER-TEE  
5. 179-4487 [5] CAP-PROTECTIVE  
6. 299-5840 Y [1] CONTROL GP-TRANSMISSION (HMU)  
7. 300-6714 [8] MOUNT  
8. 332-3578 [4] SPACER (8.2X12.7X22.8-MM THK)  
9. 349-6093 J [1] PUMP GP-METERING  
10. 350-1110 H [1] STEERING COLUMN GP  
11. 386-5265 [1] ADAPTER AS  
12. 350-1114 [1] BRACKET AS  
13. 350-1115 [1] BRACKET AS  
  6V-9632 M [4] NUT-WELD (M6X1-THD)  
  8T-3490 M [5] NUT-WELD (M10X1.5-THD)  
14. 350-1547 [1] PLATE  
15. 352-2557 [1] SEAL-INSULATION  
16. 148-8318 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8634 [1] CONNECTOR  
17. 148-8326 [1] CONNECTOR AS  
  3J-7354 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-9872 [1] CONNECTOR  
18. 148-8363 [2] ELBOW AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-9876 [1] ELBOW  
19. 148-8371 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  8C-8988 [1] ELBOW  
20. 164-5567 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
  214-7568 [1] SEAL-O-RING  
21. 3S-2093 [4] STRAP-CABLE  
22. 5C-7261 M [4] NUT (M8X1.25-THD)  
23. 6V-0852 [1] CAP-DUST  
24. 8C-6364 M [4] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
25. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
26. 8T-4121 [19] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
28. 8T-4137 M [11] BOLT (M10X1.5X20-MM)  
29. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
30. 8T-6912 M [4] BOLT (M8X1.25X50-MM)  
31. 9N-0869 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
32. 9X-6032 M [4] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
33. 7X-7877 E STRIP-EDGE (14-CM)  
34. 174-8131 M [3] SCREW-TRUSS HEAD (M4X0.7X12-MM)  
35. 361-2566 [1] COVER  
   
    AVAILABLE REPAIR KIT(S):
  257-8471 J [1] KIT-SEAL (HMU)  
    (INCLUDES SEAL-U-CUPS, SEAL-O-RINGS, RING-BACK, & SEAL-RING)
  149-2906 H [1] KIT-NUT  
    (INCLUDES NUTS)
  E   ORDER BY THE CENTIMETER
  H   KIT MARKED H SERVICES PART(S) MARKED H
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP57790788
 

350-1108: CONTROL GP-STEERING

350-1108 CONTROL GP-STEERING
S/N FER1109-UP
PART OF 348-2604 CAB AR
i06547640 SEBP5779
3501108 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 950K WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 500-6467 [1] CAP  
2. 8R-2918 [1] KNOB AS  
  3B-4508 [1] LOCKWASHER  
  8T-4244 M [1] NUT (M12X1.75-THD)  
3. 363-5911 [1] STEERING WHEEL AS  
  363-6423 [1] PLUG  
4. 148-8424 [1] TEE AS  
  6V-8397 [1] SEAL-O-RING  
  8T-8902 [1] ADAPTER-TEE  
5. 179-4487 [5] CAP-PROTECTIVE  
6. 462-1016 CY [1] CONTROL GP-TRANSMISSION  
7. 300-6714 [8] MOUNT  
8. 332-3578 [4] SPACER (8.2X12.7X22.8-MM THK)  
9. 349-6093 J [1] PUMP GP-METERING  
10. 350-1110 H [1] STEERING COLUMN GP  
11. 386-5265 [1] ADAPTER AS  
12. 350-1114 [1] BRACKET AS  
13. 350-1115 [1] BRACKET AS  
  6V-9632 M [4] NUT-WELD (M6X1-THD)  
  8T-3490 M [5] NUT-WELD (M10X1.5-THD)  
14. 350-1547 [1] PLATE  
15. 518-5929 [1] SEAL  
16. 148-8318 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8634 [1] CONNECTOR  
17. 148-8326 [1] CONNECTOR AS  
  3J-7354 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-9872 [1] CONNECTOR  
18. 148-8363 [2] ELBOW AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-9876 [1] ELBOW  
19. 148-8371 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  8C-8988 [1] ELBOW  
20. 164-5567 [1] COUPLER AS-QUICK DISCONNECT (MALE)  
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
  214-7568 [1] SEAL-O-RING  
21. 3S-2093 [4] STRAP-CABLE  
22. 5C-7261 M [4] NUT (M8X1.25-THD)  
23. 6V-0852 [1] CAP-DUST  
24. 8C-6364 M [4] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
25. 8T-0328 [4] WASHER-HARD (5.5X10X1-MM THK)  
26. 8T-4121 [19] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
28. 8T-4137 M [11] BOLT (M10X1.5X20-MM)  
29. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
30. 8T-7329 M [4] BOLT (M8X1.25X55-MM)  
31. 9N-0869 [8] WASHER-HARD (8.8X25.5X2-MM THK)  
32. 101-7404 M [4] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
33. 7X-7877 E STRIP-EDGE (14-CM)  
34. 174-8131 M [3] SCREW-TRUSS HEAD (M4X0.7X12-MM)  
35. 361-2566 [1] COVER  
   
    AVAILABLE REPAIR KIT(S):
  257-8471 J [1] KIT-SEAL (HMU)  
    (INCLUDES SEAL-U-CUPS, SEAL-O-RINGS, RING-BACK, & SEAL-RING)
  149-2906 H [1] KIT-NUT  
    (INCLUDES NUTS)
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  H   KIT MARKED H SERVICES PART(S) MARKED H
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP57790789
 

350-1109: CONTROL GP-STEERING

350-1109 CONTROL GP-STEERING
S/N FER1-UP
PART OF 348-2605 CAB AR, 415-2160 STEERING AR
i04824094 SEBP5779
3501109 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 950K WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 112-9716 [1] LEVER  
2. 350-1111 J [1] STEERING COLUMN GP  
3. 350-1113 [1] ADAPTER AS  
4. 350-1115 [1] BRACKET AS  
5. 353-4606 Y [1] STEERING WHEEL GP  
6. 1B-8709 [1] KEY-WOODRUFF  
7. 8T-4121 [21] WASHER-HARD (11X21X2.5-MM THK)  
8. 8T-4133 M [5] NUT (M10X1.5-THD)  
9. 8T-4136 M [7] BOLT (M10X1.5X25-MM)  
10. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
11. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
12. 9X-6032 M [4] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
   
    AVAILABLE REPAIR KIT(S):
  149-2906 J [1] KIT-NUT  
    (INCLUDES NUTS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 950K :

CONTROL & MTG GP-ELHYD
344-3970 CONTROL & MTG GP-ELHYD
CONTROL & MTG GP-ELHYD
344-3969 CONTROL & MTG GP-ELHYD
CONTROL & MTG GP-ELHYD
344-3969 CONTROL & MTG GP-ELHYD
CONTROL & MTG GP-ELHYD
344-3968 CONTROL & MTG GP-ELHYD
CONTROL & MTG GP-ELHYD
330-3857 CONTROL & MTG GP-ELHYD
CONTROL & MTG GP-ELHYD
330-3854 CONTROL & MTG GP-ELHYD
COMPRESSOR GP-REFRIGERANT
320-1291 COMPRESSOR GP-REFRIGERANT
COMPRESSOR & MTG GP-REFRIG
325-4653 COMPRESSOR & MTG GP-REFRIG
CONTROL & MTG GP-ELHYD
390-0295 CONTROL & MTG GP-ELHYD
CONTROL AS-A/C & HEATER
288-8557 CONTROL AS-A/C & HEATER
CONTROL GP-HANDLE
307-4671 CONTROL GP-HANDLE
CONTROL GP-HANDLE
328-5932 CONTROL GP-HANDLE
CONTROL GP-HANDLE
361-6015 CONTROL GP-HANDLE
CONTROL GP-HANDLE
458-8673 CONTROL GP-HANDLE
CONTROL GP-STEERING
350-1108 CONTROL GP-STEERING
CONTROL GP-STEERING
350-1108 CONTROL GP-STEERING

Truck sale:

Caterpillar 950K
 
Caterpillar 950K
- Wheel Loaders
CARTER MACHINERY COMPANY, INC.
 
148,000 
Caterpillar 950K, Wheel Loaders, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950K, Wheel Loaders, Construction
156,804 
Caterpillar 950K, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
 
65,878 
Caterpillar 950K, Wheel Loaders, Construction
- Wheel Loaders
ZEPPELIN BAUMASCHINEN
Caterpillar 950K FC, Wheel Loaders, Construction
172,000 
Caterpillar 950K FC, Wheel Loaders, Construction
- Wheel Loaders
WAGNER EQUIPMENT CO
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.