ELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-MONITORELECTRONICS GP-POWER TRAIN
WIRING GP
ALTERNATOR GP-CHARGING
HARNESS GP
ELECTRICAL AND STARTING SYSTEM
ELECTRONICS GP-MONITOR
#SEBP57840190
373-8283: ELECTRONICS GP-MONITOR
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 504-9119 | [1] | SOFTWARE GP-MONITOR |
#SEBP57840191
373-8282: ELECTRONICS GP-POWER TRAIN
373-8282 ELECTRONICS GP-POWER TRAIN
S/N SSA1-UP
PART OF 375-5584 ELECTRICAL AR
S/N SSA1-UP
PART OF 375-5584 ELECTRICAL AR
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 468-8045 | [1] | SOFTWARE GP-POWER TRAIN |
#SEBP57840192
324-0703: FASTENER GP-WIRING HARNESS
324-0703 FASTENER GP-WIRING HARNESS -TRANSMISSION
S/N SSA1-UP
PART OF 372-4889 WIRING GP-CHASSIS
S/N SSA1-UP
PART OF 372-4889 WIRING GP-CHASSIS
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [1] | STRAP-CABLE | |
| 2. | 154-6626 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 3. | 193-3973 | [1] | STRAP-CABLE | |
| 4. | 204-8000 | [1] | MOUNTING-CABLE TIE | |
| 5. | 4P-7581 | [1] | CLIP (LADDER) | |
| 6. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 8. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 9. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 10. | 9M-8406 | [4] | CLIP (LOOP) | |
| M | METRIC PART | |||
#SEBP57840193
358-4872: GUARD GP-ALTERNATOR
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS#SEBP57840194
372-4873: HARNESS AS-CAB
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8N-1535 | [1] | BELL AS-END | ||
| 376-0922 | [1] | BLOCK AS-FUSE | ||
| 1H-3244 | [2] | LOCKWASHER | ||
| 6V-8185 | [2] | NUT (1/4-20-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 151-1398 | [4] | KIT-TERMINAL (LOCK) | ||
| 200-8789 | [1] | SEAL | ||
| 274-3774 | [3] | CAP-CONNECTOR | ||
| 274-3775 | [1] | CAP-CONNECTOR | ||
| 274-3777 | [2] | CAP-CONNECTOR | ||
| 274-3776 | [1] | CAP-SEAL | ||
| 274-3778 | [1] | CAP-SEAL | ||
| 274-3779 | [1] | CAP-SEAL | ||
| 6V-5817 D | CONDUIT-FLEXIBLE (26.1-MM ID, SPLIT)(2-M) | |||
| 123-7615 | [2] | CONNECTOR (1-PIN) | ||
| 126-1774 | [4] | COVER-CONNECTOR | ||
| 246-9371 | [2] | COVER-RELAY | ||
| 155-2255 | [6] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2265 | [4] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2260 | [5] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [6] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [5] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [11] | KIT-CONNECTING PLUG (6-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 245-7434 | [16] | KIT-CONNECTING PLUG (10-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8N-1537 | [1] | LOCKWASHER | ||
| 8N-1540 | [2] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 8N-1542 | [1] | PIN-CONNECTOR (10-GA) | ||
| 8N-1548 | [1] | PIN-CONNECTOR (4-GA) | ||
| 9X-3401 | [117] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [117] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 202-5397 | [66] | PLUG | ||
| 9X-1054 | [3] | PLUG AS-CONNECTOR (4-PIN) | ||
| 147-1445 | [2] | PLUG AS-CONNECTOR (70-PIN) | ||
| (EACH INCLUDES) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 147-1446 | [2] | PLUG AS-CONNECTOR (70-PIN) | ||
| (EACH INCLUDES) | ||||
| 159-9322 | [1] | SEAL-O-RING | ||
| 230-4013 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 455-0705 | [1] | SEAL-CONNECTOR | ||
| 7G-7917 | [1] | PLUG-SEAL | ||
| 7G-7918 | [1] | PLUG-SEAL | ||
| 7G-7919 | [1] | PLUG-SEAL | ||
| 8T-8737 | [223] | PLUG-SEAL | ||
| 340-2566 | [16] | PLUG-SEAL | ||
| 183-5785 | [1] | RECEPTACLE AS (40-PIN) | ||
| 8N-1532 | [1] | RECEPTACLE AS-CONNECTOR (6-PIN) | ||
| 8N-1536 | [1] | NUT (1-5/8-18-THD) | ||
| 9X-0145 | [1] | RECEPTACLE AS-CONNECTOR (24-PIN) | ||
| 214-4208 | [1] | RECEPTACLE AS-CONNECTOR (70-PIN) | ||
| 185-1861 | [94] | SEAL-WIRE | ||
| 9X-3402 | [318] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [318] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 340-2565 | [36] | SOCKET-TERMINAL | ||
| 3S-2093 | [8] | STRAP-CABLE | ||
| 9X-6772 | [1] | STRAP-CABLE | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 204-1297 | [70] | TERMINAL AS-BLADE (18-GA TO 20-GA) | ||
| 6V-0491 | [4] | TERMINAL-BLADE (14-GA TO 18-GA) | ||
| 9R-9806 | [3] | TERMINAL-BLADE (18-GA TO 20-GA) | ||
| 9W-2033 | [28] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 5P-4571 | [2] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
| 9X-1056 | [12] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| 100-5041 | [8] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 9X-1056 | [2] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| -OR- | ||||
| 100-5041 | [2] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 9G-4343 | [1] | TERMINAL-RING (4-GA, 1/4-IN SCREW) | ||
| 2L-8066 | [2] | TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW) | ||
| 2L-8067 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW) | ||
| 2L-8071 | [1] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 2L-8076 | [6] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 5P-2766 | [2] | TERMINAL-RING (18-GA TO 22-GA, NO. 6 SCREW) | ||
| 2L-8054 | [1] | TERMINAL-RING (6-GA, 1/2-IN SCREW) | ||
| -OR- | ||||
| 2L-8061 | [1] | TERMINAL-RING (8-GA, 1/2-IN SCREW) | ||
| 2L-8071 | [2] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 2L-8078 | [2] | TERMINAL-RING (14-GA TO 16-GA, 5/16-IN SCREW) | ||
| 2L-8081 | [4] | TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(48-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(355-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(100-CM) | |||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP57840195
421-4977: HARNESS AS-CHASSIS
421-4977 HARNESS AS-CHASSIS
S/N SSA1-288
PART OF 372-4876 PANEL GP-CIRCUIT BREAKER
S/N SSA1-288
PART OF 372-4876 PANEL GP-CIRCUIT BREAKER
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 102-8802 | [6] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3L-6513 | [2] | TERMINAL-RING (1-GA TO 2-GA, 1/2-IN SCREW) | ||
| 8N-1533 | [1] | PLUG AS-CONNECTOR (7-PIN) | ||
| 8N-1535 | [2] | BELL AS-END | ||
| 8N-1540 | [1] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 8N-1541 | [3] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 8N-1543 | [1] | SOCKET-CONNECTOR (10-GA) | ||
| 8N-1548 | [1] | PIN-CONNECTOR (4-GA) | ||
| 8N-1549 | [1] | SOCKET-CONNECTOR (4-GA) | ||
| 8T-8737 | [74] | PLUG-SEAL | ||
| 8T-8827 | [1] | BOOT (RED) | ||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 113-0580 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 106-4155 | [1] | KIT-RETAINING BOLT | ||
| (BOLT KIT INCLUDES BOLT , RING & SEAL) | ||||
| 114-8843 E | SLEEVE-PLASTIC (45-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(40-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM) | |||
| 9X-3402 | [138] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [138] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1767 | [9] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1768 | [12] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 129-7163 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 129-7164 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 5P-3454 | [1] | TERMINAL-RING (4-GA, 5/16-IN SCREW) | ||
| 2L-8071 | [2] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 2L-8081 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW) | ||
| 9X-3401 | [51] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [51] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (PLUG KIT INCLUDES PLUG AS , WEDGE, & INTERFACE SEAL) | ||||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGES, & INTERFACE SEAL) | ||||
| 155-2270 | [11] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 1P-0810 | [1] | TAPE-ELECTRICAL | ||
| 183-5784 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 188-6210 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 211-0052 | [2] | NUT (1-11/16-18-THD) | ||
| 2L-8049 | [1] | TERMINAL-RING (6-GA, NO. 10 SCREW) | ||
| -OR- | ||||
| 2L-8057 | [1] | TERMINAL-RING (8-GA, NO. 10 SCREW) | ||
| 276-1151 | [1] | PIN-CONNECTOR (8-GA TO 10-GA) | ||
| 278-1438 | [1] | TERMINAL-RING | ||
| [1] | TERMINAL AS-RING | |||
| 289-5150 E | SLEEVE (36-CM) | |||
| 289-5151 E | SLEEVE (40-CM) | |||
| 295-8961 | [1] | RECEPTACLE AS-CONNECTOR (18-PIN) | ||
| 310-0674 | [2] | LOCKWASHER | ||
| 317-1204 E | SLEEVE (104-CM) | |||
| 319-8101 | [1] | RECEPTACLE-CONNECTOR | ||
| 337-7979 E | SLEEVE (152-CM) | |||
| 346-0305 | [1] | BOOT | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP57840196
438-6425: HARNESS AS-CHASSIS
438-6425 HARNESS AS-CHASSIS
S/N SSA289-UP
PART OF 372-4876 PANEL GP-CIRCUIT BREAKER
S/N SSA289-UP
PART OF 372-4876 PANEL GP-CIRCUIT BREAKER
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7G-7917 | [1] | PLUG-SEAL | ||
| 7G-7918 | [1] | PLUG-SEAL | ||
| 7G-7919 | [2] | PLUG-SEAL | ||
| 7T-0093 | [3] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 3L-6513 | [1] | TERMINAL-RING (1-GA TO 2-GA, 1/2-IN SCREW) | ||
| 8C-3056 E | CABLE (2-GA, RED)(169-CM) | |||
| 8N-1533 | [1] | PLUG AS-CONNECTOR (7-PIN) | ||
| 8N-1535 | [2] | BELL AS-END | ||
| 8N-1540 | [1] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 8N-1541 | [3] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 8N-1543 | [1] | SOCKET-CONNECTOR (10-GA) | ||
| 8N-1548 | [1] | PIN-CONNECTOR (4-GA) | ||
| 8N-1549 | [1] | SOCKET-CONNECTOR (4-GA) | ||
| 8T-8737 | [46] | PLUG-SEAL | ||
| 8T-8827 | [1] | BOOT (RED) | ||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 113-0580 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 106-4155 | [1] | KIT-RETAINING BOLT | ||
| (INCLUDES BOLT, RING, & SEALS) | ||||
| 114-8843 E | SLEEVE-PLASTIC (40-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM) | |||
| 9X-3402 | [136] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [136] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1767 | [9] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1768 | [12] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 129-7163 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 129-7164 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 5P-3454 | [1] | TERMINAL-RING (4-GA, 5/16-IN SCREW) | ||
| 2L-8071 | [2] | TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW) | ||
| 2L-8081 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW) | ||
| 9X-3401 | [51] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [51] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [9] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGES, & INTERFACE SEAL) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 183-5784 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 188-6210 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 211-0052 | [2] | NUT (1-11/16-18-THD) | ||
| 2L-8049 | [1] | TERMINAL-RING (6-GA, NO. 10 SCREW) | ||
| -OR- | ||||
| 2L-8057 | [1] | TERMINAL-RING (8-GA, NO. 10 SCREW) | ||
| 274-3774 | [2] | CAP-CONNECTOR | ||
| 278-1439 | [1] | TERMINAL AS-RING | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM) | |||
| 278-1438 | [1] | TERMINAL-RING | ||
| [1] | TERMINAL AS-RING | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM) | |||
| 285-5600 | [2] | TERMINAL AS-RING | ||
| (EACH INCLUDES) | ||||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(4-CM) | |||
| 289-5150 E | SLEEVE (36-CM) | |||
| 289-5151 E | SLEEVE (40-CM) | |||
| 295-8961 | [1] | RECEPTACLE AS-CONNECTOR (18-PIN) | ||
| 310-0674 | [2] | LOCKWASHER | ||
| 317-1204 E | SLEEVE (104-CM) | |||
| 319-8101 | [1] | RECEPTACLE-CONNECTOR | ||
| 337-7979 E | SLEEVE (152-CM) | |||
| 346-0305 | [1] | BOOT | ||
| 374-7465 | [1] | CAP-SEAL | ||
| 374-7468 | [1] | CAP-SEAL | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP57840197
276-0031: HARNESS AS-CONTROL
276-0031 HARNESS AS-CONTROL
S/N SSA1-UP
PART OF 320-9997, 375-9530, 377-1478 INSTALLATION GP-COMMUNICATION
S/N SSA1-UP
PART OF 320-9997, 375-9530, 377-1478 INSTALLATION GP-COMMUNICATION
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [58] | PLUG-SEAL | ||
| 9X-6772 | [2] | STRAP-CABLE | ||
| 125-7874 D | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 9X-3402 | [25] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [25] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 131-1504 | [1] | TERMINAL AS | ||
| 2L-8077 | [1] | TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW) | ||
| 125-7874 D | TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM) | |||
| 9X-3401 | [11] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [11] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| D | ORDER BY THE METER | |||
#SEBP57840198
372-4845: HARNESS AS-CONTROL
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 274-3775 | [1] | CAP-CONNECTOR | ||
| 274-3776 | [1] | CAP-SEAL | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [8] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 245-7434 | [2] | KIT-CONNECTING PLUG (10-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [13] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [13] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 202-5397 | [8] | PLUG | ||
| 8T-8737 | [9] | PLUG-SEAL | ||
| 185-1861 | [12] | SEAL-WIRE | ||
| 307-2338 E | SLEEVE (76-CM) | |||
| 9X-3402 | [26] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [26] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 204-1297 | [12] | TERMINAL AS-BLADE (18-GA TO 20-GA) | ||
| (EACH INCLUDES) | ||||
| 235-4123 | [1] | TERMINAL (18-GA TO 20-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP57840199
222-5917: HARNESS AS-ENGINE
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 135-5975 | [1] | GROMMET-WIRING | ||
| [1] | BOLT-SPECIAL | |||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 6N-7523 | [1] | WASHER (6.48X11.9X1.57-MM THK) | ||
| 155-2258 | [1] | WEDGE-PLUG LOCK (12-PIN) | ||
| 194-5226 | [12] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [12] | WIRE AS (14-GA) | ||
