FUEL SYSTEM
PUMP GP-FUEL INJECTIONLINES GP-FUEL
TANK GP-FUEL
ELECTRICAL AND STARTING SYSTEM
ALARM GPALTERNATOR GP-CHARGING
BATTERY GP
FUEL SYSTEM
PUMP GP-FUEL INJECTION
#SEBP57850160
476-8766: PUMP GP-UNIT INJECTOR HYD
476-8766 PUMP GP-UNIT INJECTOR HYD
S/N TX7115-UP; KHX1-UP
PART OF 387-8538 PUMP & MTG GP-UNIT INJ HYD
S/N TX7115-UP; KHX1-UP
PART OF 387-8538 PUMP & MTG GP-UNIT INJ HYD
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1N-8062 | [1] | BEARING AS-NEEDLE | |
| 2. | 5C-2890 M | [1] | NUT (M6X1-THD) | |
| 3. | 6V-5048 | [3] | SEAL-O-RING | |
| 4. | 8C-6711 | [1] | NUT-RETAINER (1/2-20-THD) | |
| 5. | 9X-8267 | [1] | WASHER (6.6X12X2-MM THK) | |
| 6. | 153-7036 | [1] | SPOOL | |
| 7. | 179-8128 | [1] | SEAL-O-RING | |
| 8. | 193-1736 | [1] | SEAL-O-RING | |
| 9. | 218-8655 M | [8] | BOLT-SOCKET HEAD (M5X0.8X42-MM) | |
| 10. | 383-1992 Y | [1] | PUMP GP-FUEL TRANSFER | |
| 11. | 228-5897 M | [4] | BOLT-TORX (M8X1.25X136.7-MM) | |
| 12. | 239-2402 | [4] | SEAL-O-RING | |
| 13. | 260-5716 | [1] | SPOOL | |
| 14. | 262-0284 | [1] | RING-RETAINING | |
| 15. | 313-4620 M | [3] | SCREW-PAN HEAD (M5X0.8X25-MM) | |
| 16. | 318-8144 | [1] | CONNECTOR AS | |
| 5P-8106 E | WIRE-ELECTRICAL (26-CM) | |||
| 179-7400 | [2] | SEAL | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 396-3296 Y | [1] | KIT-FUEL TRANSFER PUMP | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP57850161
232-0343: REGULATOR GP-FUEL PRESSURE
232-0343 REGULATOR GP-FUEL PRESSURE
S/N TX7115-UP; KHX1-UP
PART OF 237-9823 FILTER & LINES GP-FUEL, 392-7951 LINES GP-FUEL
S/N TX7115-UP; KHX1-UP
PART OF 237-9823 FILTER & LINES GP-FUEL, 392-7951 LINES GP-FUEL
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS#SEBP57850162
374-5369: TANK & MTG GP-FUEL
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS#SEBP57850163
374-5369: TANK & MTG GP-FUEL
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS#SEBP57850164
372-4677: TANK GP-FUEL
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [1] | STRAP-CABLE | |
| 2. | 180-3730 | [1] | STRAINER-FUEL (FILLER NECK SCREEN) | |
| 3. | 315-9859 | [1] | PLUG AS | |
| 9S-8008 | [1] | PLUG (1-1/16-12-THD) | ||
| 238-5082 | [1] | SEAL-O-RING | ||
| 4. | 322-7452 | [1] | SENDER AS-FUEL LEVEL (TANK) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 5. | 338-0912 J | [1] | CAP AS-FUEL (DEBRIS BOOT) | |
| 284-9039 | [1] | CAP-FUEL (VENTED) | ||
| 355-8947 | [1] | BOOT-FUEL CAP | ||
| 6. | 372-4679 | [1] | TANK AS | |
| 7. | 376-6504 | [1] | TUBE AS | |
| 8. | 124-6258 | [2] | CLAMP-HOSE | |
| 9. | 3D-2824 | [2] | SEAL-O-RING | |
| 10. | 7C-4354 | [2] | CLIP | |
| 11. | 8C-3210 M | [5] | BOLT (M6X1X16-MM) | |
| 12. | 8C-5172 | [1] | SEAL-RECTANGULAR | |
| 13. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 15. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 16. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 17. | 9S-8008 | [2] | PLUG (1-1/16-12-THD) | |
| 18. | 9X-8256 | [5] | WASHER (6.6X12X2-MM THK) | |
| 19. | 136-1955 E | HOSE (63-CM) | ||
| 20. | 1U-8846 B | SEALANT-GASKET | ||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
#SEBP57850165
432-8514: TANK GP-FUEL
432-8514 TANK GP-FUEL
S/N JLX859-UP
290-LITERS (76.6-U.S. GALLONS)
PART OF 374-5369 TANK & MTG GP-FUEL
S/N JLX859-UP
290-LITERS (76.6-U.S. GALLONS)
PART OF 374-5369 TANK & MTG GP-FUEL
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [1] | STRAP-CABLE | |
| 2. | 180-3730 | [1] | STRAINER-FUEL (FILLER NECK SCREEN) | |
| 3. | 304-6792 | [1] | PLUG | |
| 4. | 503-8717 | [1] | SENDER AS-LEVEL | |
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5. | 338-0912 | [1] | CAP AS-FUEL (DEBRIS BOOT) | |
| 284-9039 | [1] | CAP-FUEL (VENTED) | ||
| 355-8947 | [1] | BOOT-FUEL CAP | ||
| 6. | 376-6504 | [1] | TUBE AS | |
| 7. | 432-8515 | [1] | TANK AS-FUEL | |
| 4I-6289 | [3] | PLATE | ||
| 9R-3845 M | [2] | BOSS (M12X1.75X38-MM) | ||
| 8. | 124-6258 | [2] | CLAMP-HOSE | |
| 9. | 2M-9780 | [1] | SEAL-O-RING | |
| 10. | 3D-2824 | [2] | SEAL-O-RING | |
| 11. | 7C-4354 | [2] | CLIP | |
| 12. | 8C-3210 M | [5] | BOLT (M6X1X16-MM) | |
| 13. | 8C-5172 | [1] | SEAL-RECTANGULAR | |
| 14. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 16. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 17. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 18. | 9S-8008 | [2] | PLUG (1-1/16-12-THD) | |
| 19. | 9X-8256 | [5] | WASHER (6.6X12X2-MM THK) | |
| 20. | 423-1985 G | HOSE (25-IN) | ||
| 1U-8846 BF | SEALANT-GASKET | |||
| B | USE AS REQUIRED | |||
| F | NOT SHOWN | |||
| G | ORDER BY THE INCH | |||
| M | METRIC PART | |||
#SEBP57850166
132-1829: ALARM GP
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS#SEBP57850167
3E-6328: ALARM GP
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS#SEBP57850168
377-6862: ALTERNATOR GP-CHARGING
377-6862 ALTERNATOR GP-CHARGING
S/N JLX1-UP
PART OF 374-4868 INSTALLATION AR-ENGINE
S/N JLX1-UP
PART OF 374-4868 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8329 | [1] | SPACER (10.5X16.545X34-MM THK) | |
| 2. | 129-5096 | [1] | PULLEY-ALTERNATOR (8-GROOVE) | |
| 3. | 172-4211 | [1] | SPACER (10.5X22X50.8-MM THK) | |
| 4. | 222-4866 | [1] | BRACKET | |
| 5. | 262-4561 | [1] | SHIELD AS-HEAT | |
| 6. | 366-2756 | [1] | ALTERNATOR GP-CHARGING | |
| 7. | 5P-2566 | [1] | BOLT (1/2-13X1.5-IN) | |
| 8. | 6V-8188 | [1] | NUT (1/2-13-THD) | |
| 9. | 7X-0339 | [1] | BOLT (1/2-13X6.25-IN) | |
| 10. | 8T-3647 M | [2] | BOLT (M8X1.25X80-MM) | |
| 11. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 13. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 14. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 15. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 16. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 17. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 18. | 8T-7934 | [2] | WASHER-HARD (11X21X5-MM THK) | |
| 19. | 9S-2396 | [1] | BUSHING-TERMINAL | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP57850169
372-4888: BATTERY & WIRING GP
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-8320 | [1] | PLATE-INSTRUCTION (BATTERY) | |
| 2. | 3S-2093 | [8] | STRAP-CABLE | |
| 3. | 8V-0622 | [1] | CABLE AS-BATTERY | |
| 5P-0761 E | CABLE (00-GA, RED)(14-CM) | |||
| 8C-5917 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 8T-9757 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| (EACH TERMINAL AS INCLUDES) | ||||
| 1M-6119 | [2] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [2] | NUT (5/16-18-THD) | ||
| 9G-0003 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 9G-0004 | [1] | COVER AS-TERMINAL (RED) | ||
| (EACH COVER AS INCLUDES) | ||||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| 4. | 124-3019 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 5. | 134-2636 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 6. | 153-5710 | [2] | BATTERY GP (12-VOLT, MAINTENANCE FREE, WET) | |
| (EACH INCLUDES) | ||||
| 123-1373 | [6] | CAP AS-FILLER (7/8-9-THD) | ||
| 461-5232 | [6] | CAP AS-FILLER | ||
| 7. | 153-6281 | [1] | HOLD-DOWN-BATTERY | |
| 8. | 315-5390 M | [2] | NUT (M40X1.5-THD) | |
| 9. | 322-3305 Y | [1] | BLOCK GP-JUNCTION (BATTERY) | |
| 10. | 324-0680 | [1] | CABLE AS | |
| 8C-5918 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 315-0181 | [1] | TERMINAL AS | ||
| 315-0180 | [1] | TERMINAL-RING (00-GA, 3/8-IN SCREW) | ||
| 351-9309 E | TUBE-HEAT SHRINK (32-MM DIA)(3-CM) | |||
| 9G-0005 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| 159-8050 E | CABLE (00-GA, BLACK)(44-CM) | |||
| 299-9092 | [1] | COVER-TERMINAL (BLACK) | ||
| 11. | 324-0681 | [1] | CABLE AS | |
| 311-6112 | [1] | TERMINAL AS-BATTERY | ||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 351-9309 E | TUBE-HEAT SHRINK (32-MM DIA)(4-CM) | |||
| 315-0181 | [1] | TERMINAL AS | ||
| 315-0180 | [1] | TERMINAL-RING (00-GA, 3/8-IN SCREW) | ||
| 351-9309 E | TUBE-HEAT SHRINK (32-MM DIA)(3-CM) | |||
| 159-8050 E | CABLE (00-GA, BLACK)(47-CM) | |||
| 12. | 324-0682 | [1] | CABLE AS | |
| 8C-5917 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 311-6112 | [1] | TERMINAL AS-BATTERY | ||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 351-9309 E | TUBE-HEAT SHRINK (32-MM DIA)(4-CM) | |||
| 9X-5632 | [1] | COVER-TERMINAL (RED, RH POS) | ||
| 159-8049 E | CABLE (00-GA, RED)(58-CM) | |||
| 8N-0869 | [1] | COVER-TERMINAL (RED) | ||
| 13. | 324-0683 | [1] | CABLE AS | |
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 311-6112 | [2] | TERMINAL AS-BATTERY | ||
| (EACH INCLUDES) | ||||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 351-9309 E | TUBE-HEAT SHRINK (32-MM DIA)(4-CM) | |||
| 159-8049 E | CABLE (00-GA, RED)(171-CM) | |||
| 8N-0869 | [1] | COVER-TERMINAL (RED) | ||
| 14. | 324-0684 | [1] | CABLE AS | |
| 311-6112 | [2] | TERMINAL AS-BATTERY | ||
| (EACH INCLUDES) | ||||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 351-9309 E | TUBE-HEAT SHRINK (32-MM DIA)(4-CM) | |||
| 159-8050 E | CABLE (00-GA, BLACK)(67-CM) | |||
| 15. | 325-9438 | [2] | GROMMET AS | |
| 16. | 108-2949 M | [2] | STUD (M10X1.5X270-MM) | |
| 17. | 132-7551 | [1] | SPACER (11X19X6-MM THK) | |
| 18. | 1S-0994 | [11] | CLIP (LOOP) | |
| 19. | 2V-1771 | [11] | GROMMET | |
| 20. | 2W-7940 | [1] | BRACKET | |
| 21. | 7N-0718 Y | [1] | SWITCH GP-DISCONNECT (BATTERY) | |
| 22. | 7X-7729 | [2] | WASHER (11X25X3-MM THK) | |
| 23. | 8T-0389 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 24. | 8T-4121 | [11] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4133 M | [3] | NUT (M10X1.5-THD) | |
| 26. | 8T-4137 M | [8] | BOLT (M10X1.5X20-MM) | |
| 27. | 8T-4192 M | [3] | BOLT (M12X1.75X25-MM) | |
| 29. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 30. | 8T-4223 | [5] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 31. | 8T-4244 M | [2] | NUT (M12X1.75-THD) | |
| 32. | 290-6516 | [1] | RECEPTACLE AS | |
| 311-6112 | [1] | TERMINAL AS-BATTERY | ||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 351-9309 E | TUBE-HEAT SHRINK (32-MM DIA)(4-CM) | |||
| 9X-9825 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 159-8049 E | CABLE (00-GA, RED)(55-CM) | |||
| 159-8050 E | CABLE (00-GA, BLACK)(24-CM) | |||
| 351-9309 E | TUBE-HEAT SHRINK (32-MM DIA)(5-CM) | |||
| 33. | 091-9035 | [1] | SPACER (11X25X20-MM THK) | |
| 34. | 8T-7547 M | [4] | BOLT (M8X1.25X30-MM) | |
| 35. | 8T-4224 | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 36. | 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | |
| 37. | 8S-2634 | [1] | COVER AS | |
| 38. | 5C-7261 M | [4] | NUT (M8X1.25-THD) | |
| 39. | 4H-1225 | [4] | WASHER (11X22X6-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
